Axial Lead & Cartridge Fuses 5x20 mm > Time-Lag > 215 Series 215 Series, 5 x 20 mm, Time-Lag (Slo-Blo(R)) Fuse PS E Description 5x20mm Time-Lag surge withstand ceramic body cartridge fuse designed to IEC specification Features Agency Approvals Agency File Number PS E Cartridge Certificates: NBK080205-E10480A NBK250702-E10480E NBK100408-JP1021A Leaded Certificates: NBK080205-E10480B NBK250702-E10480F NBK100408-JP1021B . t )JHICSFBLJOHDBQBDJUZ t 3P)4DPNQMJBOUBOE lead-free Applications Used as supplementary protection in appliance or utilization equipment to provide individual protection for components or internal circuits. Ampere Range 1A - 5A 6.3A - 15A 16A - 20A Electrical Characteristics for Series 1A - 5A 6.3A - 15A 16A - 20A Certificates: 2005010207145714 1A - 6.3A Certificates: SU05001- 2011 SU05001- 2012 1A - 3.15A 4A - 10A Recognised File: E10480 125mA - 20A File: 029862 Acc. Class: LR1422 - 30 500mA - 12A License: 606726 902193 1117976 709071 709302 t .FFUUIF*&$ 60127-2, Sheet 5 specification for TimeLag fuses % of Ampere Rating 200mA - 8A *10A License: 40016610 *12A License: KM41462 200mA - 10A 60 minutes, Minimum 1A - 3.15A 60 minutes, Minimum 4A - 6.3A 60 minutes, Minimum 8A - 20A 30 minutes, Minimum 125mA - 800mA 30 minutes, Maximum 1A - 3.15A 30 minutes, Maximum 4A - 6.3A 30 minutes, Maximum 8A - 12A 30 minutes, Maximum 125mA - 800mA .25 sec. Min.; 80 secs. Max. 1A - 3.15A .75 sec. Min.; 80 secs. Max. 4A - 6.3A .75 sec. Min.; 80 secs. Max. 8A - 20A .75 sec. Min.; 80 secs. Max. 125mA - 800mA .05 sec., Min.; 5 secs. Max. 1A - 3.15A .095 sec., Min.; 5 secs. Max. 4A - 6.3A .150 sec., Min.; 5 secs. Max. 8A - 20A .150 sec., Min.; 5 secs. Max. 125mA - 800mA .005 sec., Min.; .150 sec. Max. 275% 400% 1A - 3.15A .010 sec., Min.; .150 sec. Max. 4A - 6.3A .010 sec., Min.; .150 sec. Max. 8A - 20A .010 sec., Min.; .150 sec. Max. 1000% (c) 2012 Littelfuse, Inc. Specifications are subject to change without notice. Please refer to www.littelfuse.com/series/215.html for current information. 125mA - 800mA 210% 125mA - 20A * Approved for cartridge versions only Opening Time 150% 125mA, 160mA 200mA - 800mA, 8A, 10A 1A - 6.3A 12A *15A - *20A License: 40013521 Ampere Rating 215 Series Revised: April 23, 2012 215 Series Agency t %FTJHOFEUP International (IEC ) Standards for use globally Introduction to & Circuit Protection Axial Lead Cartridge Fuses Transientology 5x20 mm > Time-Lag > 215 Series Electrical Characteristic Specifications by Item Nominal Nominal Voltage Interrupting Amp Amp Cold Melting Rating Rating Code Rating Resistance I2t (V) (A2 sec) (Ohms) Maximum Voltage Drop at Rated Current (mV) Maximum Power Dissipation at Rated Current (W) Agency Approvals PS E .125 0.125 250 11.4455 0.0330 2600 1.6 x x x .160 0.16 250 7.1000 0.0465 2400 1.6 x x x .200 0.2 250 1.8400 0.340 2100 1.6 x x x x x .250 0.25 250 1.2400 0.545 1500 1.6 x x x x x .315 0.315 250 0.8800 0.975 1100 1.6 x x x x x .400 0.4 250 0.5825 1.325 1000 1.6 x x x x x .500 0.5 250 1.1675 0.420 850 1.6 x x x x x x .630 0.63 250 0.7200 0.635 650 1.6 x x x x x x .800 0.8 250 0.4675 0.975 500 1.6 x x x x x x 001. 1 250 0.1515 1.520 350 2.5 x x x x x x x x x 1.25 1.25 250 0.1074 3.200 300 2.5 x x x x x x x x x 01.6 1.6 250 0.0707 6.830 200 2.5 x x x x x x x x x 002. 2 250 0.0566 11.680 190 2.5 x x x x x x x x x 02.5 2.5 250 0.0386 22.290 180 2.5 x x x x x x x x x 3.15 3.15 250 0.0283 43.255 140 4 x x x x x x x x x 1500 A @ 250 VAC 004. 4 250 0.0185 46.960 100 4 x x x x x x x x x 005. 5 250 0.0153 66.095 100 4 x x x x x x x x x 06.3 6.3 250 0.0108 128.750 100 4 x x x x x x x x x 008. 8 250 0.0092 209.880 100 4 x x x x x x x x x x x x* 010. 10 250 0.0066 333.565 100 4 x x x 012. 12 250 0.0061 515.500 100 4 x x x x 015. 15 250 0.0033 1237.0 TBA** TBA** x x x* 016. 16 250 0.0031 1408.0 TBA** TBA** x x x* 020. 20 250 0.0023 2600.0 TBA** TBA** x x x* 500 A 400 A x x* x X* Approval for cartridge versions only TBA** - Please contact Littelfuse for details on these parameters "UP"IBWFBO*3"!7"$ "UP"IBWFUIF*3"!7"$BOE"!7%$ I2t test at 10x rated current. Temperature Rerating Curve 215 Series (c) 2012 Littelfuse, Inc. Specifications are subject to change without notice. Please refer to www.littelfuse.com/series/215.html for current information. Axial Lead & Cartridge Fuses 5x20 mm > Time-Lag > 215 Series Average Time Current Curves T-C Curves for 1A to 20A only .125 A .160 A .200 A .250 A .315 A .400 A .500 A .630 A .800 A 1.00 A 1.25 A 1.60 A 2.00 A 2.50 A 3.15 A 4.00 A 5.00 A 6.30 A 8.00 A 10.0 A 12.0 A 15.0 A 16.0 A 20.0 A T-C Curves for 125mA to 800mA only 1000 1000 100 100 TIME IN SECONDS 10000 TIME IN SECONDS 10000 10 1 10 0.1 0.1 0.01 0.01 0.001 0.001 0.1 1 10 100 0.1 1000 1 10 100 1000 CURRENT IN AMPERES CURRENT IN AMPERES Materials Body: Ceramic Cap:/JDLFMoQMBUFE#SBTT Leads: Tin-plated Copper Operating Temperature -55C to +125C Terminal Strength .*-45%( .FUIPE" 5FTU Condition A Thermal Shock .*-45%( .FUIPE( 5FTU Condition B (5 cycles, -65C to +125C) Solderability Reference IEC 60127 Second Edition 2003-01 Annex A Vibration .*-45%( .FUIPE" Product Marking Cap 1: Brand logo, current and voltage ratings Cap 2:"HFODZBQQSPWBMNBSLJOHT Humidity .*-45%( .FUIPE# 5FTU $POEJUJPO" )JHI3) BOE elevated temp (40C) for 240 hours) Salt Spray .*-45%( .FUIPE% 5FTU Condition B (c) 2012 Littelfuse, Inc. Specifications are subject to change without notice. Please refer to www.littelfuse.com/series/215.html for current information. 215 Series 215 Series Product Characteristics Introduction to & Circuit Protection Axial Lead Cartridge Fuses Transientology 5x20 mm > Time-Lag > 215 Series Soldering Parameters - Wave Soldering Recommended Process Parameters: 280 260 Wave Parameter Lead-Free Recommendation 240 Preheat: 220 %FQFOETPO'MVY"DUJWBUJPO5FNQFSBUVSF 200 180 160 140 120 (Typical Industry Recommendation) Temperature Minimum: 100 C Temperature Maximum: Preheat Time: 150 C 60-180 seconds 100 80 60 Solder Pot Temperature: 260 C Maximum Solder Dwell Time: 2-5 seconds 40 20 Time (Seconds) Cooling Time Preheat Time 240 230 220 210 200 190 180 170 160 150 140 130 120 110 90 100 80 70 60 50 40 30 0 20 Recommended Hand-Solder Parameters: 0 10 Temperature (C) - Measured on bottom side of board 300 Solder Iron Temperature: 350 C +/- 5C )FBUJOH5JNFTFDPOETNBY Dwell Time Note: These devices are not recommended for IR or Convection Reflow process. Different values of A and B available, please contact the Littelfuse sales representative in your region: B A C For the pigtailed fuse, please follow the recommendations below for axial lead forming and mounting into PCB: Lead forming: A C The distance C between cap flat surface and axial lead shall be greater than 1.0 mm. PCB mounting: B Dimensions The distance between PCB and fuse cap is recommended to be a minimum of 1.5 mm. Part Numbering System 0215 xxxx M X E P 0215.125P to 0215020P Series Amp Code 0215.125XEP to 0215.800XEP Refer to Amp Code column of Electrical Characteristics Table Quantity Code M = 1000 Packaging Code 0215001.XEP to 0215020.XEP X = Filler Option Codes Blank : Cartidge Type Fuse E : Axial Lead Fuse * Ratings above 6.3 A have 0.8 mm diameter lead; ratings above 12 A have 1.2 mm diameter lead 215 Series Lead-free (c) 2012 Littelfuse, Inc. Specifications are subject to change without notice. Please refer to www.littelfuse.com/series/215.html for current information. Axial Lead & Cartridge Fuses 5x20 mm > Time-Lag > 215 Series Packaging Packaging Option Quantity Quantity & Packaging Code Taping Width N/A N/A N/A N/A N/A N/A 1000 1000 1000 1000 1000 100 MX MXE MRET1 .9( MXB )9 N/A N/A T1=52mm (2.062") N/A N/A N/A 215 Series 215 Series #VML #VML Reel and Tape #VML #VML #VML Packaging Specification (c) 2012 Littelfuse, Inc. Specifications are subject to change without notice. Please refer to www.littelfuse.com/series/215.html for current information. 215 Series