MCC TM Micro Commercial Components FR201 THRU FR207 omponents 20736 Marilla Street Chatsworth !"# $ % !"# Features Halogen free available upon request by adding suffix "-HF" Lead Free Finish/Rohs Compliant (Note1) ("P"Suffix designates Compliant. See ordering information) High Current Capability Fast Switching Speed For High Efficiency Epoxy meets UL 94 V-0 flammability rating Moisture Sensitivity Level 1 * * * * * * 2 Amp Fast Recovery Rectifier 50 to 1000 Volts Maximum Ratings * * DO-15 Operating Temperature: -55C to +150C Storage Temperature: -55C to +150C MCC Device Maximum Maximum Catalog Marking Recurrent RMS Number Peak Reverse Voltage Voltage FR201 FR201 50V 35V FR202 FR202 100V 70V FR203 FR203 200V 140V FR204 FR204 400V 280V FR205 FR205 600V 420V FR206 FR206 800V 560V FR207 FR207 1000V 700V Maximum DC Blocking Voltage 50V 100V 200V 400V 600V 800V 1000V D A Cathode Mark Electrical Characteristics @ 25C Unless Otherwise Specified Average Forward Current Peak Forward Surge Current Maximum Instantaneous Forward Voltage Maximum DC Reverse Current At Rated DC Blocking Voltage 2 I t Rating for fusing Maximum Reverse Recovery Time FR201-204 FR205 FR206-207 Typical Junction Capacitance IF(AV) 2A TA = 55C IFSM 60A 8.3ms, half sine VF 1.3V IFM = 2.0A; TA = 25C IR 5.0A 100A TA = 25C TA = 100C I 2t Trr CJ 15A2S t<8.3ms 150ns 250ns 500ns 40pF IF=0.5A, IR=1.0A, Irr=0.25A B D C DIMENSIONS DIM A B C D INCHES MIN .230 .104 .026 1.000 MAX .300 .140 .034 --- MM MIN 5.80 2.60 .70 25.40 MAX 7.60 3.60 .90 --- NOTE Measured at 1.0MHz, VR=4.0V Notes:1.High Temperature Solder Exemption Applied,see EU Directive Annex Notes 7. Revision: C www.mccsemi.com 1 of 4 2013/01/01 MCC FR201 thru FR207 Figure 1 Typical Forward Characteristics TM Micro Commercial Components 20 Figure 2 Forward Derating Curve 10 3.0 6 4 2.5 2 25C Amps 2.0 1 .6 1.5 Amps .4 1.0 .2 .5 .1 Single Phase, Half Wave 60Hz Resistive or Inductive Load .06 0 .04 0 50 75 100 125 150 175 C .02 .01 .4 .6 .8 1.0 Average Forward Rectified Current - Amperesversus Ambient Temperature - C 1.4 12 Volts Instantaneous Forward Current - Amperesversus Instantaneous Forward Voltage - Volts Figure 3 Junction Capacitance 100 60 40 20 pF TJ=25C 10 6 4 2 1 .1 .2 .4 1 Volts 2 4 10 20 40 100 200 400 1000 Junction Capacitance - pFversus Reverse Voltage - Volts Revision: C www.mccsemi.com 2 of 4 2013/01/01 MCC FR201 thru FR207 TM Micro Commercial Components Figure 4 Maximum Non-Repetitive Forward Surge Current 90 75 60 45 Amps 30 15 0 1 2 4 6 8 10 20 40 60 80 100 Cycles Peak Forward Surge Current - Amperesversus Number Of Cycles At 60Hz - Cycles Figure 5 Reverse Recovery Time Characteristic And Test Circuit Diagram 50 10 trr +0.5A 0 Pulse Generator Note 2 25Vdc 1 Oscilloscope Note 1 -1.0 1cm Set Time Base for 20/100ns/cm Notes: 1. Rise Time = 7ns max. Input impedance = 1 megohm, 22pF 2. Rise Time = 10ns max. Source impedance = 50 ohms 3. Resistors are non-inductive Revision: C -0.25 www.mccsemi.com 3 of 4 2013/01/01 MCC TM Micro Commercial Components Ordering Information : Device Packing Part Number-TP Tape&Reel: 4Kpcs/Reel Part Number-BP Bulk: 25Kpcs/Carton Note : Adding "-HF" suffix for halogen free, eg. Part Number-TP-HF ***IMPORTANT NOTICE*** Micro Commercial Components Corp. reserves the right to make changes without further notice to any product herein to make corrections, modifications , enhancements , improvements , or other changes . Micro Commercial Components Corp . does not assume any liability arising out of the application or use of any product described herein; neither does it convey any license under its patent rights ,nor the rights of others . The user of products in such applications shall assume all risks of such use and will agree to hold Micro Commercial Components Corp . and all the companies whose products are represented on our website, harmless against all damages. ***LIFE SUPPORT*** MCC's products are not authorized for use as critical components in life support devices or systems without the express written approval of Micro Commercial Components Corporation. ***CUSTOMER AWARENESS*** Counterfeiting of semiconductor parts is a growing problem in the industry. Micro Commercial Components (MCC) is taking strong measures to protect ourselves and our customers from the proliferation of counterfeit parts. MCC strongly encourages customers to purchase MCC parts either directly from MCC or from Authorized MCC Distributors who are listed by country on our web page cited below. Products customers buy either from MCC directly or from Authorized MCC Distributors are genuine parts, have full traceability, meet MCC's quality standards for handling and storage. MCC will not provide any warranty coverage or other assistance for parts bought from Unauthorized Sources. MCC is committed to combat this global problem and encourage our customers to do their part in stopping this practice by buying direct or from authorized distributors. www.mccsemi.com Revision: C 4 of 4 2013/01/01