MCC TM Micro Commercial Components omponents 20736 Marilla Street Chatsworth !"# $ % !"# MPS2222A Features * * * * * x * Wide operating junction temperature: -55 oC+150 oC Capable of 600mWatts of Power Dissipation Collector-current 0.6A Epoxy meets UL 94 V-0 flammability rating Moisure Sensitivity Level 1 Marking:Type number Lead Free Finish/RoHS Compliant ("P" Suffix designates RoHS Compliant. See ordering information) NPN General Purpose Amplifier Electrical Characteristics @ 25C Unless Otherwise Specified Symbol Parameter Min Max TO-92 Units A OFF CHARACTERISTICS V(BR)CEO V(BR)CBO V(BR)EBO IBL ICEX Collector-Emitter Breakdown Voltage* (I C=10mAdc, IB=0) Collector-Base Breakdown Voltage (I C=10Adc, IE=0) Emitter-Base Breakdown Voltage (I E=10Adc, IC=0) Base Cutoff Current (VCE=60Vdc, VBE=3.0Vdc) Collector Cutoff Current (VCE=60Vdc, VBE=3.0Vdc) 40 Vdc 75 Vdc 6.0 Vdc 20 nAdc 10 nAdc E B ON CHARACTERISTICS hFE VCE(sat) VBE(sat) DC Current Gain* (I C=0.1mAdc, VCE=10Vdc) (I C=1.0mAdc, VCE=10Vdc) (I C=10mAdc, VCE=10Vdc) (I C=150mAdc, VCE=10Vdc) (I C=150mAdc, VCE=1.0Vdc) (I C=500mAdc, VCE=10Vdc) Collector-Emitter Saturation Voltage (I C=150mAdc, IB=15mAdc) (I C=500mAdc, IB=50mAdc) Base-Emitter Saturation Voltage (I C=150mAdc, IB=15mAdc) (I C=500mAdc, IB=50mAdc) C 35 50 75 100 50 40 0.6 300 0.3 1.0 Vdc 1.2 2.0 Vdc D SMALL-SIGNAL CHARACTERISTICS fT Cobo Cibo NF Current Gain-Bandwidth Product (I C=20mAdc, VCE=20Vdc, f=100MHz) Output Capacitance (VCB=10Vdec, IE=0, f=100kHz) Input Capacitance (VBE=0.5Vdc, IC=0, f=100kHz) Noise Figure (IC=100Adc, VCE=10Vdc, RS=1.0k f=1.0kHz) 300 MHz 8.0 pF 25 pF 4.0 dB 10 25 225 60 ns ns ns ns SWITCHING CHARACTERISTICS td tr ts tf *Pulse Width Delay Time (VCC=30Vdc, VBE=0.5Vdc Rise Time IC=150mAdc, IB1=15mAdc) Storage Time (VCC=30Vdc, IC=150mAdc Fall Time IB1=IB2=15mAdc) 300s, Duty Cycle 2.0% E G B C DIMENSIONS DIM A B C D E G INCHES MIN .175 .175 .500 .016 .135 .095 MM MAX .185 .185 ------.020 .145 .105 MIN 4.45 4.45 12.70 0.41 3.43 2.42 MAX 4.70 4.70 -------0.56 3.68 2.67 NOTE www.mccsemi.com Revision: C 1 of 4 2012/01/20 MCC MPS2222A Micro Commercial Components Collector Current vs Collector-Emitter Voltage DC Current Gain vs Collector Current 480 8 VCE = 5.0V 35A 30A 400 6 320 25A IC - (mA) hFE 20A 4 240 15A 160 10A 2 5A 80 0 0.1 10 1 10 100 20 30 40 50 VCE- (V) IC (mA) Maximum Power Dissipation vs Ambient Temperature Collector Current vs Collector-Emitter Voltage 800 250 IB = 4mA 600 200 TO-92 IB = 3mA PD(MAX) - (mW) IC - (mA) IB = 2mA 150 400 IB = 1mA 100 200 SOT-23 0 50 .5 0 1.0 1.5 0 2.0 50 100 150 200 TA - (C) VCE - (V) Contours of Constant Gain Bandwidth Product (fT) Input and Output Capacitance vs Reverse Bias Voltage 24 12 20 10 f = 1.0MHz CIB 16 pF VCE - (V) 12 8 6 8 COB 4 4 0 0.1 2 0.1 1.0 10 100 IC - (mA) *50MHz increments from 150 to 250MHz and 260MHz 1.0 10 Volts - (V) www.mccsemi.com Revision: C 2 of 4 2012/01/20 TM MCC MPS2222A Micro Commercial Components Base Saturation Voltage vs Collector Current Collector Saturation Voltage vs Collector Current 1.4 1.4 1.0 IC/IB = 10 1.0 .6 .6 VBE(SAT) - (V) VCE(SAT) - (V) hfe=10 .1 .1 hfe=20 .06 TA = 125C .06 TA = 25C .01 1.0 10 .01 0.1 1000 100 IC - (mA) 1.0 10 100 IC - (mA) Base Saturation Voltage vs Collector Current 14 Collector Saturation Voltage vs Collector Current 4 IC/IB = 10 TA = 25C 10 1 6 .6 VBE(SAT) - (V) VCE(SAT) - (V) 1 .1 hfe=20 0.6 TA=25C .06 hfe=10 TA=125C 0.1 1.0 10 .01 1000 100 0.1 1.0 10 100 IC - (mA) IC - (mA) Switching Times vs Collector Current 1000 IB1 = IB2 = IC/10 ts 100 T - (ns) tr 10 tf td 1.0 1.0 10 100 IC - (mA) www.mccsemi.com Revision: C 3 of 4 2012/01/20 TM MCC TM Micro Commercial Components Ordering Information : Device Packing Ammo Packing: 20Kpcs/Carton Part Number-AP Part Number-BP Bulk: 100Kpcs/Carton ***IMPORTANT NOTICE*** Micro Commercial Components Corp. reserves the right to make changes without further notice to any product herein to make corrections, modifications , enhancements , improvements , or other changes . Micro Commercial Components Corp . does not assume any liability arising out of the application or use of any product described herein; neither does it convey any license under its patent rights ,nor the rights of others . The user of products in such applications shall assume all risks of such use and will agree to hold Micro Commercial Components Corp . and all the companies whose products are represented on our website, harmless against all damages. ***LIFE SUPPORT*** MCC's products are not authorized for use as critical components in life support devices or systems without the express written approval of Micro Commercial Components Corporation. ***CUSTOMER AWARENESS*** Counterfeiting of semiconductor parts is a growing problem in the industry. Micro Commercial Components (MCC) is taking strong measures to protect ourselves and our customers from the proliferation of counterfeit parts. MCC strongly encourages customers to purchase MCC parts either directly from MCC or from Authorized MCC Distributors who are listed by country on our web page cited below. Products customers buy either from MCC directly or from Authorized MCC Distributors are genuine parts, have full traceability, meet MCC's quality standards for handling and storage. MCC will not provide any warranty coverage or other assistance for parts bought from Unauthorized Sources. MCC is committed to combat this global problem and encourage our customers to do their part in stopping this practice by buying direct or from authorized distributors. www.mccsemi.com Revision: C 4 of 4 2012/01/20 3