BAV74LT1 Monolithic Dual Switching Diode Features * Pb-Free Package is Available http://onsemi.com 3 CATHODE MAXIMUM RATINGS (EACH DIODE) Symbol Value Unit Reverse Voltage VR 50 Vdc Forward Current IF 200 mAdc IFM(surge) 500 mAdc Rating Peak Forward Surge Current Maximum ratings are those values beyond which device damage can occur. Maximum ratings applied to the device are individual stress limit values (not normal operating conditions) and are not valid simultaneously. If these limits are exceeded, device functional operation is not implied, damage may occur and reliability may be affected. Characteristic Symbol Max Unit PD 225 mW 1.8 mW/C 556 C/W 300 2.4 mW mW/C RJA 417 C/W TJ, Tstg -55 to +150 C Thermal Resistance, Junction-to-Ambient Junction and Storage Temperature SOT-23 CASE 318 STYLE 9 1 2 MARKING DIAGRAM Total Device Dissipation FR- 5 Board (Note 1), TA = 25C Derate above 25C Total Device Dissipation Alumina Substrate, (Note 2) TA = 25C Derate above 25C 2 ANODE 3 THERMAL CHARACTERISTICS Thermal Resistance, Junction-to-Ambient ANODE 1 RJA PD 1. FR-5 = 1.0 0.75 0.062 in. 2. Alumina = 0.4 0.3 0.024 in 99.5% alumina. JA M JA M Specific Device Code = Date Code ORDERING INFORMATION Device Package Shipping BAV74LT1 SOT-23 3000 / Tape & Reel BAV74LT1G SOT-23 (Pb-Free) 3000 / Tape & Reel BAV74LT3 SOT-23 10,000 / Tape & Reel For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D. Semiconductor Components Industries, LLC, 2004 July, 2004 - Rev. 3 1 Publication Order Number: BAV74LT1/D BAV74LT1 ELECTRICAL CHARACTERISTICS (TA = 25C unless otherwise noted) (EACH DIODE) Characteristic Symbol Min Max Unit V(BR) 50 - Vdc - - 100 0.1 OFF CHARACTERISTICS Reverse Breakdown Voltage (I(BR) = 5.0 Adc) Adc Reverse Voltage Leakage Current, (Note 3) (VR = 50 Vdc, TJ = 125C) (VR = 50 Vdc) IR Diode Capacitance (VR = 0, f = 1.0 MHz) CD - 2.0 pF Forward Voltage (IF = 100 mAdc) VF - 1.0 Vdc Reverse Recovery Time (IF = IR = 10 mAdc, IR(REC) = 1.0 mAdc, measured at IR = 1.0 mA, RL = 100 ) trr - 4.0 ns 3. For each individual diode while the second diode is unbiased. Curves Applicable to Each Anode 10 IR , REVERSE CURRENT (A) TA = 85C 10 TA = -40C 1.0 0.1 TA = 25C 0.2 0.4 0.6 0.8 1.0 VF, FORWARD VOLTAGE (VOLTS) TA = 125C 1.0 TA = 85C 0.1 TA = 55C 0.01 0.001 1.2 TA = 150C TA = 25C 0 10 Figure 1. Forward Voltage 20 30 40 VR, REVERSE VOLTAGE (VOLTS) Figure 2. Leakage Current 1.0 CD, DIODE CAPACITANCE (pF) IF, FORWARD CURRENT (mA) 100 0.9 0.8 0.7 0.6 0 2 4 6 VR, REVERSE VOLTAGE (VOLTS) Figure 3. Capacitance http://onsemi.com 2 8 50 BAV74LT1 PACKAGE DIMENSIONS SOT-23 (TO-236) CASE 318-08 ISSUE AH A NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 3. MAXIMUM LEAD THICKNESS INCLUDES LEAD FINISH THICKNESS. MINIMUM LEAD THICKNESS IS THE MINIMUM THICKNESS OF BASE MATERIAL. 4. 318-03 AND -07 OBSOLETE, NEW STANDARD 318-08. L 3 1 V B S 2 G DIM A B C D G H J K L S V C D H J K INCHES MIN MAX 0.1102 0.1197 0.0472 0.0551 0.0350 0.0440 0.0150 0.0200 0.0701 0.0807 0.0005 0.0040 0.0034 0.0070 0.0140 0.0285 0.0350 0.0401 0.0830 0.1039 0.0177 0.0236 STYLE 9: PIN 1. ANODE 2. ANODE 3. CATHODE SOLDERING FOOTPRINT* 0.95 0.037 0.95 0.037 2.0 0.079 0.9 0.035 0.8 0.031 SCALE 10:1 mm inches *For additional information on our Pb-Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. http://onsemi.com 3 MILLIMETERS MIN MAX 2.80 3.04 1.20 1.40 0.89 1.11 0.37 0.50 1.78 2.04 0.013 0.100 0.085 0.177 0.35 0.69 0.89 1.02 2.10 2.64 0.45 0.60 BAV74LT1 ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. "Typical" parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor P.O. Box 61312, Phoenix, Arizona 85082-1312 USA Phone: 480-829-7710 or 800-344-3860 Toll Free USA/Canada Fax: 480-829-7709 or 800-344-3867 Toll Free USA/Canada Email: orderlit@onsemi.com N. American Technical Support: 800-282-9855 Toll Free USA/Canada ON Semiconductor Website: http://onsemi.com Order Literature: http://www.onsemi.com/litorder Japan: ON Semiconductor, Japan Customer Focus Center 2-9-1 Kamimeguro, Meguro-ku, Tokyo, Japan 153-0051 Phone: 81-3-5773-3850 http://onsemi.com 4 For additional information, please contact your local Sales Representative. BAV74LT1/D