High Value / High Voltage Resistors Type HB Series Type HB Series Characteristics Electrical Tyco Electronics is a leading European supplier of standard and custom designed high value/high voltage resistors for high voltage, industrial, control, medical and general-purpose use. The HB is a tough epoxy coated high voltage resistor, with axial or radial leads, values up to 1G Ohm and an operational voltage to 20kV as standard and 30kV to order. The resistors are made from quality materials for optimum reliability and stability. Tyco Electronics can test resistors to conform to relevant international, MIL or customer specifications. Tyco Electronics is happy to advise on the use of resistors for high frequency applications and to supply information for high voltage use. Key Features I Up to 15kV Element Voltage * Unique specification for the most demanding applications I High Ratio of Size to Power * The solution to your PCB population problems I 1kW to 1GW * Coupled with 1% tolerance gives ultimate design flexibility HBA HB1 HB3 Power Dissipation - Power @ 20C (W): 0.8 2.0 4.0 @ 70C: 0.4 1.0 2.0 Ohmic Value - Min (Ohms): 1K 10K 10K Max: 120M 1G 1G Resistance Tolerance (%) (Tighter By Request): 1%, 2%, 5% 1%, 2%, 5% 1%, 2%, 5% Maximum Working Voltage - DC or ACrms (Volts): 1kV 7.5kV 15kV Insulation Resistance - Epoxy Coated, @500V dc (Ohms): >106M >106M >106M Load Stability - 1000hr's @ 70C (%): 0.5% 0.5% 0.5% Temp. Rapid Change - -55C to 125C for 5 cycles (R): 0.1% 0.1% 0.1% Endurance - 1000 Hours @ 200C (R): <=2% <=2% <=2% Resistance to Soldering Heat - 350C for 3.5seconds (R): 0.05% 0.05% 0.05% Temperature Coefficient (ppm/C): 100ppm/C 100ppm/C 100ppm/C (20ppm/C available to special order) Voltage Coefficient: Negligible up to 100K Negligible up to 200K Increasing to Increasing to 0.02ppm/Volt at 800K 0.01ppm/Volt at 1M0 Increasing to Increasing to 1.0ppm/Volt at 5M0 1.0ppm/Volt at 10M Increasing to Increasing to 2.0ppm/Volt at 50M 2.0ppm/Volt at 100M Increasing to Increasing to 8.0ppm/Volt at 1000M 8.0ppm/Volt at 1000M Ambient Temperature Range (C): -55 to 125 -55 to 125 -55 to 125 Long Term Damp Heat (%): 0.25% 0.25% 0.25% (Steady state 56 Days 95% RH at 40C) Noise (Quantech) Dependent -20dB (0.1 V/V) at lower values on Resistor Type and Value: +10dB (3.3 V/V) at higher values Encapsulation: Epoxy coating (Optional) Solvent Resistance: Print will withstand the action of all commonly used industrial solvents. Lead Material: Tinned copper wire Lead Length: Minimum 20mm Lead Diameter: Nominal 0.6 0.05mm Dimensions Type HBA, HB1 & HB3 (Radial) B Type HB1 & HB3 (Axial) C F A I Established Product with Proven Reliability I Low Inductance * For the fastest switching speeds I D G E Applications I High Voltage I Voltage Divider I Surge I Filter I Balancing I Inrush Limiting Literature No. 1773310 Issued: 01-10 Type HBA HB1 HB3 Uncoated A B C D E F G H I 10.2 7 1.75 60.2 5.0 - - - - Epoxy Coated 12.5 Uncoated 8.4 Epoxy Coated 10.4 Uncoated 8.4 Epoxy Coated 10.4 Dimensions are shown for reference purposes only. 8 2.6 60.5 5.0 - - - - 26 1.5 33.8 22.9 26 66 1.5 8.4 26.5 3.0 35.8 22.9 26.3 66 3 9.2 51.1 1.5 33.8 48.3 51.1 91.1 1.5 8.4 52 3.0 35.8 48.3 53.5 91.1 3 9.6 Dimensions are in millimetres unless otherwise specified. Specifications subject to change. tycoelectronics.com passives.tycoelectronics.com High Value / High Voltage Resistors Type HB Series Derating Curve 4.5 HB3 4 Power (W) 3.5 3 2.5 HB1 2 1.5 HBA 1 0.5 0 0 20 40 60 80 100 Ambient Temperature (degC) 120 140 Surface Temperature Rise 100 Surface Temp. Rise (C) 90 HBA 80 HB3 HB1 70 60 50 40 30 20 10 0 0 0.5 1 1.5 2 2.5 3 Power Dissipation (Watts) 3.5 4 How to Order HB Common Part 3 1K0 Power Rating Resistance Value @ 70C 1Kohm HB- High Value / High Voltage Resistor A - 0.4W 1 - 1.0W 3 - 2.0W Literature No. 1773310 Issued: 01-10 (1000) 1K0 1Mohm (1000000) 1M0 Dimensions are shown for reference purposes only. J Z R E Tolerance Temp. Coefficient of Resistance Lead Style Coating Styles R - Radial Leads F - 1% G - 2% J - 5% Dimensions are in millimetres unless otherwise specified. Z - 100ppm A - Axial Leads (HB1, HB3 only for Axial Leads) Specifications subject to change. E - Epoxy Blue Coating tycoelectronics.com passives.tycoelectronics.com