A3144LLTTR - Allegro MicroSystems, Inc.

Data Sheet

27621.6B*

Always order by complete part number, e.g., A3141ELT .

ABSOLUTE MAXIMUM RATINGS

at T

A = +25°C

Supply Voltage, VCC ............................ 28 V

Reverse Battery Voltage, VRCC ........... -35 V

Magnetic Flux Density, B .......... Unlimited

Output OFF Voltage, VOUT .................. 28 V

Reverse Output Voltage, VOUT ........... -0.5 V

Continuous Output Current, IOUT ...... 25 mA

Operating Temperature Range, TA

Suffix ‘E–’ .................. -40°C to +85°C

Suffix ‘L–’ ................ -40°C to +150°C

Storage Temperature Range,

TS.............................. -65°C to +170°C

These Hall-effect switches are monolithic integrated circuits with

tighter magnetic specifications, designed to operate continuously over

extended temperatures to +150°C, and are more stable with both

temperature and supply voltage changes. The unipolar switching

characteristic makes these devices ideal for use with a simple bar or rod

magnet. The four basic devices (3141, 3142, 3143, and 3144) are

identical except for magnetic switch points.

Each device includes a voltage regulator for operation with supply

voltages of 4.5 to 24 volts, reverse battery protection diode, quadratic

Hall-voltage generator, temperature compensation circuitry, small-

signal amplifier, Schmitt trigger, and an open-collector output to sink

up to 25 mA. With suitable output pull up, they can be used with

bipolar or CMOS logic circuits. The A3141– and A3142– are im-

proved replacements for the UGN/UGS3140–; the A3144– is the

improved replacement for the UGN/UGS3120–.

The first character of the part number suffix determines the device

operating temperature range. Suffix ‘E–’ is for the automotive and

industrial temperature range of -40°C to +85°C. Suffix ‘L–’ is for the

automotive and military temperature range of -40°C to +150°C. Three

package styles provide a magnetically optimized package for most

applications. Suffix ‘–LT’ is a miniature SOT89/TO-243AA transistor

package for surface-mount applications; suffix ‘–UA’ is a three-lead

ultra-mini-SIP.

FEATURES and BENEFITS

■ Superior Temp. Stability for Automotive or Industrial Applications

■ 4.5 V to 24 V Operation … Needs Only An Unregulated Supply

■ Open-Collector 25 mA Output … Compatible with Digital Logic

■ Reverse Battery Protection

■ Activate with Small, Commercially Available Permanent Magnets

■ Solid-State Reliability

■ Small Size

■ Resistant to Physical Stress

Pinning is shown viewed from branded side.

SENSITIVE HALL-EFFECT SWITCHES

FOR HIGH-TEMPERATURE OPERATION

3141

THRU

3144

Dwg. PH-003A

SUPPLY

VCC

GROUND

OUTPUT

3141

THRU

3144

SENSITIVE

HALL-EFFECT SWITCHES

FOR HIGH-TEMP. OPERATION

115 Northeast Cutoff, Box 15036

Worcester, Massachusetts 01615-0036 (508) 853-5000

FUNCTIONAL BLOCK DIAGRAM

REG.

Dwg. FH-005-2

GROUND

OUTPUT

MAGNETIC CHARACTERISTICS in gauss over operating supply voltage range.

NOTES: Typical values are at TA = +25°C and VCC = 8 V.

BOP = operate point (output turns ON); BRP = release point (output turns OFF); Bhys = hysteresis (BOP - BRP).

1 gauss (G) is exactly equal to 0.1 millitesla (mT).

*Complete part number includes a suffix to identify operating temperature range (E- or L-) and package type ( -LT or -UA).

ELECTRICAL CHARACTERISTICS at VCC = 8 V over operating temperature range.

Limits

Characteristic Symbol Test Conditions Min. Typ. Max. Units

Supply Voltage VCC Operating 4.5 — 24 V

Output Saturation Voltage VOUT(SAT) IOUT = 20 mA, B > BOP — 175 400 mV

Output Leakage Current IOFF VOUT = 24 V, B < BRP — <1.0 10 µA

Supply Current ICC B < BRP (Output OFF) — 4.4 9.0 mA

Output Rise Time trRL = 820 Ω, CL = 20 pF — 0.04 2.0 µs

Output Fall Time tfRL = 820 Ω, CL = 20 pF — 0.18 2.0 µs

Part Numbers*

A3141– A3142– A3143– A3144–

Characteristic Min. Typ. Max. Min. Typ. Max. Min. Typ. Max. Min. Typ. Max.

BOP at TA = 25°C 50 100 160 130 180 230 220 280 340 70 — 350

over operating temp. range 30 100 175 115 180 245 205 280 355 35 — 450

BRP at TA = 25°C 10 45 130 75 125 175 165 225 285 50 — 330

over operating temp. range 10 45 145 60 125 190 150 225 300 25 — 430

Bhys at TA = 25°C 20 55 80 30 55 80 30 55 80 20 55 —

over operating temp. range 20 55 80 30 55 80 30 55 80 20 55 —

3141

THRU

3144

SENSITIVE

HALL-EFFECT SWITCHES

FOR HIGH-TEMP. OPERATION

www.allegromicro.com

SUPPLY CURRENT SUPPLY CURRENT

10 15 20 25

SUPPLY VOLTAGE IN VOLTS

Dwg. GH-041-1

SUPPLY CURRENT IN mA

2.0

4.0

6.0

8.0

B ≥ B

B ≤ B

T = +25°C

0 25 50 75 100

AMBIENT TEMPERATURE IN °°

°°C

-50

Dwg. GH-039-1

125

-25

V = 8 V

SUPPLY CURRENT IN mA

7.0

6.0

5.0

4.0

150

B ≤ B

B ≥ B

TYPICAL OPERATING CHARACTERISTICS

A3142– SWITCH POINTS OUTPUT SATURATION VOLTAGE

0 25 50 75 100

300

AMBIENT TEMPERATURE IN °°

°°C

200

100

-50

Dwg. GH-040-1

SATURATION VOLTAGE IN mV

150

-25 125

I = 20 mA

V = 4.5–24 V

OUT

0 50 100

AMBIENT TEMPERATURE IN °°

°°C

-50

Dwg. GH-044

SWITCH POINT IN GAUSS

300

400

200

100

OPERATE POINT

RELEASE POINT

V = 8 V

150

0-25 25 75 125

* Complete part number includes a suffix denoting operating temperature range (E- or L-) and package type ( -LT, -U, or -UA).

3141

THRU

3144

SENSITIVE

HALL-EFFECT SWITCHES

FOR HIGH-TEMP. OPERATION

115 Northeast Cutoff, Box 15036

Worcester, Massachusetts 01615-0036 (508) 853-5000

TYPICAL OPERATING CHARACTERISTICS (cont.)

CHANGE IN OPERATE POINT

10 15 20 25

SUPPLY VOLTAGE IN VOLTS

Dwg. GH-042-1

CHANGE IN OPERATE POINT IN GAUSS

-5.0

5.0

T = +25°C

OPERATION

The output of these devices (pin 3) switches low when the magnetic field

at the Hall sensor exceeds the operate point threshold (BOP). At this point, the

output voltage is VOUT(SAT). When the magnetic field is reduced to below the

release point threshold (BRP), the device output goes high. The difference in

the magnetic operate and release points is called the hysteresis (Bhys) of the

device. This built-in hysteresis allows clean switching of the output even in

the presence of external mechanical vibration and electrical noise.

Extensive applications information for Hall-effect sensors is available in:

• Hall-Effect IC Applications Guide, Application Note 27701;

• Hall-Effect Devices: Soldering, Gluing, Potting, Encapsulating, and Lead

Forming, Application Note 27703.1;

• Soldering of Through-Hole Hall-Sensor Dervices, Application Note 27703;

and

• Soldering of Surface-Mount Hall-Sensor Devices, Application Note 27703.2.

All are provided in Allegro Electronic Data Book, AMS-702. or at

www.allegromicro.com

SENSOR LOCATIONS

(±0.005” [0.13 mm] die placement)

1 32

Dwg. MH-011-10A

0.0195"

0.50 mm

NOM

BRANDED

SURFACE

ACTIVE AREA DEPTH

0.082"

2.07 mm

0.055"

1.39 mm

Suffix “UA”

Suffix “LT”

0.043"

1.09 mm

1 32

Dwg. MH-008-2D

0.0305"

0.775 mm

NOM

ACTIVE AREA DEPTH 0.089"

2.26 mm

Allegro

3141

THRU

3144

SENSITIVE

HALL-EFFECT SWITCHES

FOR HIGH-TEMP. OPERATION

www.allegromicro.com

Dwg. MA-009-3A in

123

0.072

0.064

0.167

0.155

0.059

BSC

0.0189

0.0142

0.047

0.035

0.102

0.090

0.063

0.055 0.0173

0.0138

0.090

0.084

0.0221

0.0173

0.118

BSC

0.181

0.173

Dwg. MA-009-3A mm

123

4.60

4.40

1.83

1.62

4.25

3.94

1.50

BSC

0.48

0.36

1.20

0.89

2.60

2.29

1.60

1.40 0.44

0.35

2.29

2.13

0.56

0.44

3.00

BSC

PACKAGE DESIGNATOR ‘LT’

(SOT89/TO-243AA)

Dimensions in Inches

(for reference only)

Dimensions in Millimeters

(controlling dimensions)

NOTES: 1. Exact body and lead configuration at vendor’s option within limits shown.

2. Supplied in bulk pack (500 pieces per bag) or add "TR" to part number for tape and reel.

3. Only low-temperature (≤240°C) reflow-soldering techniques are recommended for SOT89 devices.

0.098

0.031

0.102

0.047

0.181

0.079

Dwg. MA-012-3 in

Pads 1, 2, 3, and A — Standard SOT89 Layout

Pads 1, 2, 3, and B — Low-Stress Version

Pads 1, 2, and 3 only — Lowest Stress, But Not Self Aligning

0.028

TYP 0.031

TYP

2.5

0.8

2.6

1.2

4.6

2.0

Dwg. MA-012-3 mm

Pads 1, 2, 3, and A — Standard SOT89 Layout

Pads 1, 2, 3, and B — Low-Stress Version

Pads 1, 2, and 3 only — Lowest Stress, But Not Self Aligning

0.7

TYP

0.8

TYP

3141

THRU

3144

SENSITIVE

HALL-EFFECT SWITCHES

FOR HIGH-TEMP. OPERATION

115 Northeast Cutoff, Box 15036

Worcester, Massachusetts 01615-0036 (508) 853-5000

Dimensions in Inches

(controlling dimensions)

Dimensions in Millimeters

(for reference only)

PACKAGE DESIGNATOR ‘UA’

NOTES: 1. Tolerances on package height and width represent

allowable mold offsets. Dimensions given are

measured at the widest point (parting line).

2. Exact body and lead configuration at vendor’s option

within limits shown.

3. Height does not include mold gate flash.

4. Recommended minimum PWB hole diameter to clear

transition area is 0.035" (0.89 mm).

5. Where no tolerance is specified, dimension is nominal.

6. Supplied in bulk pack (500 pieces per bag).

Dwg. MH-014E in

0.164

0.159

0.062

0.058

0.0173

0.0138

0.050

BSC

45°

0.640

0.600

0.0189

0.0142

0.085

MAX

45°

0.031

123

0.122

0.117

SEE NOTE

Dwg. MH-014E mm

4.17

4.04

1.57

1.47

0.44

0.35

1.27

BSC

45°

16.26

15.24

0.48

0.36

2.16

MAX

45°

0.79

123

3.10

2.97

SEE NOTE

Radial Lead Form (order A314xxUA-LC)

NOTE: Lead-form dimensions are the nominals produced on the

forming equipment. No dimensional tolerance is implied or

guaranteed for bulk packaging (500 pieces per bag).

0.620"

0.500"

(15.7 mm

12.7 mm)

0.100"

(2.5 mm)

Dwg. MH-026

0.108"

(2.74 mm)

123

3141

THRU

3144

SENSITIVE

HALL-EFFECT SWITCHES

FOR HIGH-TEMP. OPERATION

www.allegromicro.com

HALL-EFFECT SENSORS

UNIPOLAR HALL-EFFECT DIGITAL SWITCHES

Partial Operate Release Hysteresis Replaces

Part Point (G) Point (G) (G) Oper. and

Number

Over Oper. Voltage & Temp. Range

Temp. Packages Comments

A3121x 220 to 500 80 to 410 60 to 150 E, L LT, UA 3019, 3113, 3119

A3122x 260 to 430 120 to 360 70 to 140 E, L LT, UA

A3123x 230 to 470 160 to 330 70 to 140 E, L LT, UA

A3141x 30 to 175 10 to 145 20 to 80 E, L LT, UA 3040, 3140

A3142x 115 to 245 60 to 190 30 to 80 E, L LT, UA

A3143x 205 to 355 150 to 300 30 to 80 E, L LT, UA

A3144x 35 to 450 25 to 430 >20 E, L LT, UA 3020, 3120

A3161E <160 (Typ 130) >30 (Typ 110) 5 to 80 E LT, UA 2-wire operation

A3163E <160 (Typ 98) >30 (Typ 79) 5 to 40 E LT, UA 2-wire

A3240x <50 (Typ 35) >5 (Typ 25) Typ 10 E, L LH, LT, UA chopper stabilized

A3250x <50 to >350 _ 5 to 35 J, L UA programmable, chopper stabilized

A3251x <50 to >350 _ 5 to 35 J, L UA programmable, chopper stabilized

A3361E <125 >40 5 to 30 E LH, LT, UA 2-wire, chopper stabilized,

output normally high

A3362E <125 >40 5 to 30 E LH, LT, UA 2-wire, chopper stabilized,

output normally low

MICROPOWER OMNIPOLAR HALL-EFFECT DIGITAL SWITCHES

Partial Operate Release Hysteresis Average

Part Points (G) Points (G) (G) Oper. Supply

Number

Over Oper. Voltage & Temp. Range

Temp. Packages Current (µA)

A3209E >-60, <60 <-5, >5 Typ 7.7 E LH, UA <425 (Typ 145)

A3210E >-60, <60 <-5, >5 Typ 7.7 E LH, UA <60 (Typ 8.8)

A3212E >-55, <55 <-10, >10 Typ. 8 E LH, UA <10 (Typ 4.2)

BIPOLAR HALL-EFFECT DIGITAL SWITCHES

Partial Operate Release Hysteresis Replaces

Part Point (G) Point (G) (G) Oper. and

Number

Over Oper. Voltage & Temp. Range

Temp. Packages Comments

UGx3132 <95 (Typ 32) >-95 (Typ -20) >30 (Typ 52) K, L, S LT, UA 3030, 3130, 3131

UGx3133 <75 (Typ 32) >-75 (Typ -20) >30 (Typ 52) K, L, S LT, UA

UGx3134 -40 to 50 -50 to 40 5 to 55 E, L LT, UA

A3260x <30 (Typ 10) >-30 (Typ -10) Typ 20 E, L LH, LT, UA 2 wire, chopper stabilized

Notes: 1) Typical data is at TA = +25°C and nominal operating voltage.

2) “x” = Operating Temperature Range [suffix letter or (prefix)]: S (UGN) = -20°C to +85°C, E = -40°C to +85°C,

J = -40°C to +115°C, K (UGS) = -40°C to +125°C, L (UGL) = -40°C to +150°C.

3141

THRU

3144

SENSITIVE

HALL-EFFECT SWITCHES

FOR HIGH-TEMP. OPERATION

115 Northeast Cutoff, Box 15036

Worcester, Massachusetts 01615-0036 (508) 853-5000

The products described herein are manufactured under one or more

of the following U.S. patents: 5,045,920; 5,264,783; 5,442,283;

5,389,889; 5,581,179; 5,517,112; 5,619,137; 5,621,319; 5,650,719;

5,686,894; 5,694,038; 5,729,130; 5,917,320; and other patents

pending.

Allegro MicroSystems, Inc. reserves the right to make, from time to

time, such departures from the detail specifications as may be required

to permit improvements in the performance, reliability, or

manufacturability of its products. Before placing an order, the user is

cautioned to verify that the information being relied upon is current.

Allegro products are not authorized for use as critical components

in life-support appliances, devices, or systems without express written

approval.

The information included herein is believed to be accurate and

reliable. However, Allegro MicroSystems, Inc. assumes no responsibil-

ity for its use; nor for any infringements of patents or other rights of

third parties that may result from its use.