1
www.clare.com
LBA110
DS-LBA110-R5
LBA110 is 350V, 120mA, 35independent 1-Form-Aand
1-Form-B relays. It is designed to provide an ideal solu-
tion where a complimentary Form-A/Form-B relay pair is
required. Current limiting version is available (“L” suffix).
Telecommunications
Telecom Switching
Tip/Ring Circuits
Modem Switching (Laptop, Notebook, Pocket Size)
Hookswitch
Dial Pulsing
Ground Start
Ringer Injection
Instrumentation
Multiplexers
Data Acquisition
Electronic Switching
I/O Subsystems
Meters (Watt-Hour, Water, Gas)
Medical Equipment-Patient/Equipment Isolation
Security
Aerospace
Industrial Controls
UL Recognized: File Number E76270
CSA Certified: File Number LR 43639-10
BSI Certified to:
BS EN 60950:1992 (BS7002:1992)
Certificate #: 7344
BS EN 41003:1993
Certificate #: 7344
Small 8 Pin DIP Package
Low Drive Power Requirements (TTL/CMOS
Compatible)
No Moving Parts
High Reliability
Arc-Free With No Snubbing Circuits
3750VRMS Input/Output Isolation
FCC Compatible
VDE Compatible
No EMI/RFI Generation
Machine Insertable, Wave Solderable
Surface Mount and Tape & ReelVersions Available
Applications
Features
Description
Approvals
DUAL POLE OptoMOS®Relay
Ordering Information
Part # Description
LBA110 8 Pin DIP (50/Tube)
LBA110P 8 Pin Flatpack (50/Tube)
LBA110PTR 8 Pin Flatpack (1000/Reel)
LBA110S 8 Pin Surface Mount (50/Tube)
LBA110STR 8 Pin Surface Mount (1000/Reel)
LBA110 Units
Load Voltage 350 V
Load Current 120 mA
Max RON 35
Pin Configuration
Switching Characteristics of
Normally Closed (Form B) Devices
CONTROL
10ms
10%
90% 90%
+
+
TON
TOFF
+
Switching Characteristics of
Normally Open (Form A) Devices
CONTROL
LOAD
10ms
10% 10%
90%
+
TON TOFF
+
+
1
2
3
4
8
7
6
5
LBA110 Pinout
+ Control - Normally Closed
Control - Normally Closed
+ Control - Normally Open
Control - Normally Open
Normally Closed Pole
Normally Open Pole
AC/DC Configuration
www.clare.com
LBA110
Rev. 5
Absolute Maximum Ratings are stress ratings. Stresses
in excess of these ratings can cause permanent damage
to the device. Functional operation of the device at these
or any other conditions beyond those indicated in the
operational sections of this data sheet is not implied.
Exposure of the device to the absolute maximum ratings
for an extended period may degrade the device and effect
its reliability.
Absolute Maximum Ratings (@ 25˚ C)
2
Parameter Min Typ Max Units
Input Power Dissipation - - 1501mW
Input Control Current - - 50 mA
Peak (10ms) - - 1 A
Reverse Input Voltage - - 5 V
Total Power Dissipation - - 8002mW
Isolation Voltage
Input to Output 3750 - - VRMS
Operational Temperature -40 - +85 °C
Storage Temperature -40 - +125 °C
Soldering Temperature
DIP Package - - +260 °C
Flatpack/Surface Mount
Package - - +220 °C
(10 Seconds Max.)
1Derate Linearly 1.33 mw/˚C
2Derate Linearly 6.67 mw/˚C
Electrical Characteristics
Parameter Conditions Symbol Min Typ Max Units
Output Characteristics @ 25°C
Load Voltage (Peak) - VL- - 350 V
Load Current *(Continuous)
AC/DC Configuration - IL- - 120 mA
Peak Load Current 10ms ILPK - - 350 mA
On-Resistance
AC/DC Configuration IL=120mA RON -2335
Off-State Leakage Current VL=350V ILEAK --1µA
Switching Speeds
Turn-On IF=5mA, VL=10V TON --3ms
Turn-Off IF=5mA, VL=10V TOFF --3ms
Output Capacitance 50V; f=1MHz COUT -25- pF
Input Characteristics @ 25°C
Input Control Current IL=Load Current IF5-50mA
Input Dropout Current - IF0.4 0.7 - mA
Input Voltage Drop IF=5mA VF0.9 1.2 1.4 V
Reverse Input Voltage - VR--5 V
Reverse Input Current VR=5V IR- - 10 µA
Input to Output Capacitance - CI/O -3- pF
Input to Output Isolation - VI/O 3750 - - VRMS
*NOTE: If both poles operate simultaneously load current must be derated so as not to exceed the package power dissipation value.
LBA110
www.clare.com
Rev. 5
PERFORMANCE DATA*
The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact
our application department.
3
LBA110
Typical LED Forward Voltage Drop
(N=50 Ambient Temperature = 25°C; IF = 5mADC)
35
30
25
20
15
10
5
01.17 1.19 1.21 1.23 1.25
LED Forward Voltage Drop (V)
Device Count (N)
LBA110 - FormA
Typical On-Resistance Distribution
(N=50 Ambient Temperature = 25°C)
(Load Current = 120mADC, IF=5mADC)
35
30
25
20
15
10
5
019.5 21.5 23.5 25.520.5 22.5 24.5
On-Resistance ()
Device Count (N)
LBA110 - FormB
Typical On-Resistance Distribution
(N=50 Ambient Temperature = 25°C)
(Load Current = 120mADC, IF=5mADC)
25
20
15
10
5
025.5 27.5 29.5 31.526.5 28.5 30.5
On-Resistance ()
Device Count (N)
LBA110 - FormA
Typical Blocking Voltage Distribution
(N=50 Ambient Temperature = 25°C)
35
30
25
20
15
10
5
0400 440 480 520420 460 500
Blocking Voltage (V)
Device Count (N)
LBA110 - FormB
Typical Blocking Voltage Distribution
(N=50 Ambient Temperature = 25°C)
30
25
20
15
10
5
0365 385 405 425375 395 415
Blocking Voltage (V)
Device Count (N)
LBA110 - FormA
Typical IF for Switch Dropout
(N=50 Ambient Temperature = 25°C)
(Load Current = 120mADC)
25
20
15
10
5
00.65 1.17 1.690.39 0.91 1.43 1.95
LED Current (mA)
Device Count (N)
LBA110 - FormB
Typical IF for Switch Dropout
(N=50 Ambient Temperature = 25°C)
(Load Current = 120mADC)
25
20
15
10
5
00.9 1.3 1.70.7 1.1 1.5 1.9
LED Current (mA)
Device Count (N)
LBA110 - FormA
Typical IF for Switch Operation
(N=50 Ambient Temperature = 25°C)
(Load Current = 120mADC)
0.65 1.17 1.690.91 1.43 1.95
LED Current (mA)
Device Count (N)
25
20
15
10
5
0
LBA110 - FormB
Typical IF for Switch Operation
(N=50 Ambient Temperature = 25°C)
(Load Current = 120mADC)
25
20
15
10
5
00.7 1.1 1.5 1.90.9 1.3 1.7
LED Current (mA)
Device Count (N)
LBA110 - FormA
Typical Turn-On Time
(N=50 Ambient Temperature = 25°C)
(Load Current = 120mADC; IF = 5mADC)
0.45 1.05 1.650.75 1.35
Turn-On (ms)
Device Count (N)
25
20
15
10
5
0
LBA110 - FormB
Typical Turn-On Time
(N=50 Ambient Temperature = 25°C)
(Load Current = 120mADC; IF = 5mADC)
0.25 0.45 0.650.35 0.55 0.75
Turn-On (ms)
Device Count (N)
25
20
15
10
5
0
LBA110 - FormA
Typical Turn-Off Time
(N=50 Ambient Temperature = 25°C)
(Load Current = 120mADC; IF = 5mADC)
0.12 0.28 0.44 0.600.520.360.20
Turn-Off (ms)
Device Count (N)
25
20
15
10
5
0
www.clare.com
4
LBA110
Rev. 5
PERFORMANCE DATA*
*The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact
our application department.
LBA110 - Form A
Typical Load Current vs. Temperature
Temperature (°C)
Load Current (mA)
180
160
140
120
100
80
60
40
20
0-40 -20 0 20 40 60 80 120100
10mA
20mA
5mA
LBA110 - Form B
Typical Load Current vs. Temperature
Temperature (°C)
Load Current (mA)
180
160
140
120
100
80
60
40
20
0-40 -20 0 20 40 60 80 120100
5mA
LAA110
Typical Leakage vs. Temperature
(Measured across Pins 5 & 6 or 7 & 8)
Temperature (°C)
Leakage (µA)
-40
0.016
0.014
0.012
0.010
0.008
0.006
0.004
0.002
0-20 0 20 40 60 80 100
LBA110 - FormA
Typical Blocking Voltage vs. Temperature
Temperature (°C)
Blocking Voltage (VRMS)
-40
480
470
460
450
440
430
420 -20 0 20 40 60 80 100
LBA110 - FormB
Typical Blocking Voltage vs. Temperature
Temperature (°C)
Blocking Voltage (VRMS)
-40
415
410
405
400
395
390
385
380
375 -20 0 20 40 60 80 100
LBA110 - FormA
Typical Turn-Off vs. Temperature
(Load Current = 120mADC)
Temperature (°C)
5mA
Turn-Off (ms)
-40
0.40
0.35
0.30
0.25
0.20
0.15
0.10
0.05
0-20 0 20 40 60 80 100
LBA110 - FormB
Typical Turn-Off vs. Temperature
(Load Current = 120mADC)
Temperature (°C)
5mA
10mA
20mA
Turn-Off (ms)
-40
1.2
1.0
0.8
0.6
0.4
0.2
0-20 0 20 40 60 80 100
LBA110
Typical LED Forward Voltage Drop
vs. Temperature
IF = 5mA
Temperature (°C)
LED Forward Voltage Drop (V)
50mA
30mA
20mA
10mA
5mA
1.8
1.6
1.4
1.2
1.0
0.8-40 -20 0 20 40 60 80 120100
LBA110 - FormA
Typical Turn-On vs. LED Forward Current
(Load Current = 120mADC)
LED Forward Current (mA)
Turn-On (ms)
05 1015202530354045
1.0
0.9
0.8
0.7
0.6
0.5
0.4
0.3
0.2
0.1
050
LBA110 - FormB
Typical Turn-Off Time
(N=50 Ambient Temperature = 25°C)
(Load Current = 120mADC; IF = 5mADC)
0.40 0.72 1.040.880.560.24
Turn-Off (ms)
Device Count (N)
25
20
15
10
5
0
LBA110
www.clare.com 5
Rev. 5
PERFORMANCE DATA*
*The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact
our application department.
LBA110 - FormB
Typical Turn-On vs. LED Forward Current
(Load Current = 120mADC)
LED Forward Current (mA)
Turn-On (ms)
05 1015202530354045
0.42
0.41
0.40
0.39
0.38
0.37
0.36
0.35
0.34 50
LBA110 - FormA
Typical Turn-Off vs. LED Forward Current
(Load Current = 120mADC)
LED Forward Current (mA)
Turn-Off (ms)
05 1015202530354045
0.220
0.215
0.210
0.205
0.200
0.195
0.190
0.185
0.180
050
LBA110 - FormB
Typical Turn-Off vs. LED Forward Current
(Load Current = 120mADC)
LED Forward Current (mA)
Turn-Off (ms)
05 1015202530354045
0.7
0.6
0.5
0.4
0.3
0.2
0.1
050
LBA110 - FormA
Typical On-Resistance vs. Temperature
(Load Current = 120mADC; IF = 5mADC)
Temperature (°C)
On-Resistance ()
-40
60
50
40
30
20
10
0-20 0 20 40 60 80 100
LBA110 - FormB
Typical On-Resistance vs. Temperature
(Load Current = 120mADC; IF = 5mADC)
Temperature (°C)
On-Resistance ()
-40
60
50
40
30
20
10
0-20 0 20 40 60 80 100
LBA110 - FormA
Typical IF for Switch Operation vs. Temperature
(Load Current = 120mADC)
Temperature (°C)
LED Current (mA)
-40
2.500
2.000
1.500
1.000
0.500
0-20 0 20 40 60 80 100
LBA110 - FormB
Typical IF for Switch Operation vs. Temperature
(Load Current = 120mADC)
Temperature (°C)
LED Current (mA)
-40
3.000
2.500
2.000
1.500
1.000
0.500
0-20 0 20 40 60 80 100
LBA110 - FormA
Typical IF for Switch Dropout vs. Temperature
(Load Current = 120mADC)
Temperature (°C)
LED Current (mA)
-40
2.500
2.000
1.500
1.000
0.500
0-20 0 20 40 60 80 100
LBA110 - FormB
Typical IF for Switch Dropout vs. Temperature
(Load Current = 120mADC)
Temperature (°C)
LED Current (mA)
-40
3.000
2.500
2.000
1.500
1.000
0.500
0-20 0 20 40 60 80 100
LBA110 - FormA
Typical Load Current vs. Load Voltage
(Ambient Temperature = 25°C; IF = 5mADC)
Load Voltage (V)
Load Current (mA)
150
100
50
0
-50
-100
-150 -4 -3 -1-2 0 1 2 3 4
LBA110 - FormB
Typical Load Current vs. Load Voltage
(Ambient Temperature = 25°C; IF = 5mADC)
Load Voltage (V)
Load Current (mA)
150
100
50
0
-50
-100
-150 -4 -3 -1-2 0 1 2 3 4
LBA110
Energy Rating Curve
Time
Load Current (A)
10µs
1.0
0.9
0.8
0.7
0.6
0.5
0.4
0.3
0.2
0.1
01ms100µs 100ms 1s
10ms 10s 100s
www.clare.com
6
LBA110
Rev. 5
Dimensions
mm
(inches)
Mechanical Dimensions
PC Board Pattern
(Top View)
6.350 ± .127
(.250 ± .005)
2.540 ± .127
(.100 ± .005)
7.620 ± .127
(.300 ± .005)
7.620 ± .127
(.300 ± .005)
8-.800 DIA.
(8-.031 DIA.)
7.239 TYP.
(.285)
3.302
(.130)
7.620 ± .254
(.300 ± .010)
9.144 TYP.
(.360)
6.350 ± .127
(.250 ± .005)
9.652 ± .381
(.380 ± .015)
2.540 ± .127
(.100 ± .005)
9.144 ± .508
(.360 ± .020)
.457 ± .076
(.018 ± .003)
8.077 ± .127
(.318 ± .005 )
8 Pin DIP Through Hole (Standard)
PC Board Pattern
(Top View)
2.540 ± .127
(.100 ± .005)
8.763 ± .127
(.345 ± .005)
1.193
(.047)
.787
(.031)
8 Pin Flatpack (P Suffix)
7.620 ± .254
(.300 ± .010)
2.159 TYP.
(.085)
2.286 MAX.
(.090)
9.398 ± .127
(.370 ± .005)
6.350 ± .127
(.250 ± .005)
9.652 ± .381
(.380 ± .015)
2.540 ± .127
(.100 ± .005)
8.077 ± .127
(.318 ± .005)
.457 ± .076
(.018 ± .003)
.203
(.008)
.635 ± .127
(.025)
PC Board Pattern
(Top View) 2.540 ± .127
(.100 ± .005)
8.305 ± .127
(.327 ± .005)
1.905 ± .127
(.075 ± .005)
1.498 ± .127
(.059 ± .005)
4.445 ± .127
(.175 ± .005) 3.302
(.130)
7.620 ± .254
(.300 ± .010)
6.350 ± .127
(.250 ± .005)
8.077 ± .127
(.318 ± .005)
2.540 ± .127
(.100 ± .005)
9.525 ± .254
(.375 ± .010)
.457 ± .076
(.018 ± .003)
.254 TYP.
(.010)
.635 TYP.
(.025)
8 Pin DIP Surface Mount (S Suffix) 9.652 ± .381
(.380 ± .015)
LBA110
www.clare.com 7
Rev. 5
Tape and Reel Packaging for 8 Pin Flatpack Package
7.493 ± .102
(.295 ± .004)
12.090
(.476)
1.753 ± 0.102
(.069 ± .004)
3.987 ± .102
(.157 ± .004)
1.498 ± .102
(.059 ± .004)
6.731 MAX.
(.265) .406 MAX.
(.016)
4.877
(.192)
Top Cover
Tape
2.007 ± .102
(.079 ± .004)
11.988 ± .102
(.472 ± .004)
User Direction of Feed
.050R TYP.
16.002 ± .305
(.630 ± .012)
10.287
(.405)
Embossment
Embossed Carrier
Top Cover
Tape Thickness
.102 MAX.
(.004)
10.287 ± .102
(.405 ± .004) 1.549 ± .102
(.061 ± .004)
330.2 DIA.
(13.00)
18
Dimensions
mm
(inches)
Mechanical Dimensions
Tape and Reel Packaging for 8 Pin Surface Mount Package
7.493 ± .102
(.295 ± .004)
12.090
(.476)
1.753 ± .102
(.069 ± .004)
3.987 ± .102
(.157 ± .004)
1.498 ± .102
(.059 ± .004)
6.731 MAX.
(.265) .406 MAX.
(.016)
4.877
(.192)
Top Cover
Tape
2.007 ± .102
(.079 ± .004)
11.989 ± .102
(.472 ± .004)
User Direction of Feed
.050R TYP.
16.002 ± .305
(.630 ± .012)
10.300
(.405)
Embossment
Embossed Carrier
Top Cover
Tape Thickness
.102 MAX.
(.004)
10.300 ± .102
(.405 ± .004) 1.549 ± .102
(.061 ± .004)
330.2 DIA.
(13.00)
18
Clare, Inc. makes no representations or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications and product descriptions
at any time without notice. Neither circuit patent licenses nor indemnity are expressed or implied. Except as set forth in Clare’s Standard Terms and Conditions of Sale, Clare, Inc. assumes no liability whatsoever, and
disclaims any express or implied warranty, relating to its products including, but not limited to, the implied warranty of merchantability, fitness for a particular purpose, or infringement of any intellectual property right.
The products described in this document are not designed, intended, authorized or warranted for use as components in systems intended for surgical implant into the body, or in other applications intended to sup-
port or sustain life, or where malfunction of Clare’s product may result in direct physical harm, injury, or death to a person or severe property or environmental damage. Clare, Inc. reserves the right to discontinue or
make changes to its products at any time without notice.
Specification: DS-LBA110-R5.0
©Copyright 2002, Clare, Inc.
All rights reserved. Printed in USA.
6/25/02
For additional information please visit our website at: www.clare.com