NTE3116 & NTE3117
Bar Graph Display
Description:
The NTE3116 (High Efficiency Green) and NTE3117 (Yellow) are 10−segment bar graph displays with
separate anodes and cathodes for each light segment. The packages are end stackable.
Features:
DLarge Segments, Closely Spaced
DEnd Stackable
DFast Switching, Excellent for Multiplexing
DLow Power Consumption
DDirectly Compatible with IC’s
DWide Viewing Angle
DStandard .300” DIP Lead Spacing
DCategorized for Luminous Intensity (Note 1)
Absolute Maximum Ratings:
Power Dissipation (TA = +25C) 750mW. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Derate Linearly from 50C−14.3mW/C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Operating Temperature Range −40 to +85C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Storage Temperature Range −40 to +85C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Continuous Forward Current
Total
NTE3116 300mA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
NTE3117 200mA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Per Segment
NTE3116 30mA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
NTE3117 25mA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Reverse Voltage, Per Segment 6V. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Lead Temperature (During Soldering, 5sec max, Note 2) +260C. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Typical Thermal Characteristics:
Thermal Resistance, Junction−to−Free−Air, RthJA 160C/W. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Wavelength Temperature Coefficient (Case Temperature) 1.0Å/C. . . . . . . . . . . . . . . . . . . . . . . . . . . .
Forward Voltage Temperature Coefficient
NTE3116 1.4mV/C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
NTE3117 −1.5mV/C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Note 1. The average Luminous Intensity is obtained by summing the Luminous Intensity of each
segment and dividing by the total number of segments. The standard of measurement is
the Photo Research Corp. “Spectra” Microcandela Meter (Model IV−D) corrected for wave-
length. Intensity will not vary more than 33.3% between all segments within a unit.
Note 2. Leads immersed to 1/16” (1.6mm) from the body of the device. Maximum unit surface tem-
perature is +140C. For flux removal, Freon TF, Freon TE, isoproponal or water may be used
up to their boiling points.