G38305543024 - Carlo Gavazzi Group

Du line

Fieldbus Installationbus

Specifications are subject to change without notice (28.09.99) 1

Dupline®is a registered trademark. A product of the CARLO GAVAZZI Group

Product Description Ordering Key

Type: Dupline®

H8-housing

Receiver

No. of channels

Output type

Power supply

Receiver for Digital Signals

Type G 3830 5543

• 8-channel receiver

• Galvanically separated SPST relay outputs

• Load: 8 x 5 A/250 VAC

• H8-housing

• For mounting on DIN-rail (EN 50022)

• LED-indications for supply, Dupline®carrier

and outputs

• AC power supply

• Channel coding by GAP 1605

Supply Ordering no.

8 channels

5 A/250 VAC

24 VAC G 3830 5543 024

115 VAC G 3830 5543 115

230 VAC G 3830 5543 230

Dupline®receiver.

SPST relay outputs for con-

Type Selection

trol of 8 loads of up to 250

VAC/5 A.

Supply Specifications

Power supply

Overvoltage cat. III (IEC 60664)

Rated operational voltage

through term. 21 & 22 230 230 VAC, ±15% (IEC 60038)

115 115 VAC, ±15% (IEC 60038)

024 24 VAC, ±15%

Frequency 45 to 65 Hz

Voltage interruption ≤40 ms

Rated operational power Typ. 7.0 VA

Rated impulse withstand

voltage 230 4 kV

115 2.5 kV

024 800 V

Dielectric voltage

Supply - Dupline®≥4 kVAC (rms)

Supply - Outputs ≥4 kVAC (rms)

Output Specifications

Outputs

8, SPST relays

Isolated in groups of 8 x 1

Contact ratings (AgCdO) µ (micro gap)

Resistive loads AC 1 5 A/250 VAC (1250 VA)

DC 1 0.25 A/250 VDC (62 W)

or 5 A/25 VDC (125 W)

Inductive loads AC 15 2.5 A/230 VAC

DC 13 5 A/24 VDC

Mechanical lifetime ≥30 x 106operations

Electrical lifetime

(at max. load) AC 1 ≥2.0 x 105operations

Operating frequency ≤7200 operations/h

Dielectric voltage

Outputs - Dupline®≥4 kVAC (rms)

Response time 1 pulse train

G 3830 5543 024

Du line

Fieldbus Installationbus

2Specifications are subject to change without notice (28.09.99)

Dupline®is a registered trademark. A product of the CARLO GAVAZZI Group

Output OFF delay

upon loss of Dupline®carrier ≤20 ms

Power ON delay Typ. 2 s

Indication for

Supply ON LED, green

Dupline®carrier LED, yellow

Output ON LED, red (one per output)

Environment

Degree of protection IP 20

Pollution degree 3 (IEC 60664)

Operating temperature -20° to +50°C (-4° to +122°F)

Storage temperature

-50° to +85°C (-58° to +185°F)

Humidity (non-condensing) 20 to 80%

Mechanical resistance

Shock 15 G (11 ms)

Vibration 2 G (6 to 55 Hz)

Dimensions

Material

(see Technical information) H8-housing

Weight 800 g

G 3830 5543

General Specifications Mode of Operation

8-channel receiver with 8

normally open contact out-

puts. Each output may be

coded individually by means

of the code programmer

GAP 1605. For details, plea-

se refer to the respective

data sheet.

The outputs are normally off.

When a transmitter coded to

the selected channel is ac-

tivated, the output turns on

and remains on until the re-

spective channel becomes

deactivated.

Operation Diagram

Dupline®carrier

Transmission on channel for output 1

Output 1 (term. 29 & 30)

Transmission on chan. for output 2

Power supply

Output 2 (term. 31 & 32)

Wiring Diagram Accessories

DIN-rail FMD 411

For further information see "Accessories".

Output connections

Output 1: terminals 29 & 30

Output 2: terminals 31 & 32

Output 3: terminals 33 & 34

Output 4: terminals 35 & 36

Output 5: terminals 9 & 10

Output 6: terminals 11 & 12

Output 7: terminals 13 & 14

Output 8: terminals 15 & 16

The default setting of the

module is such that upon

loss of Dupline®carrier all

the outputs go off.

out

Power

supply

out

S: signal wire