Du line Receiver for Digital Signals Type G 3830 5543 (R) Fieldbus Installationbus * 8-channel receiver * Galvanically separated SPST relay outputs * Load: 8 x 5 A/250 VAC * H8-housing * For mounting on DIN-rail (EN 50022) * LED-indications for supply, Dupline(R) carrier and outputs * AC power supply * Channel coding by GAP 1605 Ordering Key Product Description (R) Dupline receiver. SPST relay outputs for con- trol of 8 loads of up to 250 VAC/5 A. G 3830 5543 024 Type: Dupline(R) H8-housing Receiver No. of channels Output type Power supply Type Selection Supply Ordering no. 8 channels 5 A/250 VAC 24 VAC 115 VAC 230 VAC G 3830 5543 024 G 3830 5543 115 G 3830 5543 230 Supply Specifications Output Specifications Power supply Rated operational voltage through term. 21 & 22 230 115 024 Frequency Voltage interruption Rated operational power Rated impulse withstand voltage 230 115 024 Dielectric voltage Supply - Dupline(R) Supply - Outputs Outputs Isolated in groups of Contact ratings (AgCdO) Resistive loads AC 1 DC 1 or Inductive loads AC 15 DC 13 Mechanical lifetime Electrical lifetime (at max. load) AC 1 Operating frequency Dielectric voltage Outputs - Dupline(R) Response time Overvoltage cat. III (IEC 60664) 230 VAC, 15% (IEC 60038) 115 VAC, 15% (IEC 60038) 24 VAC, 15% 45 to 65 Hz 40 ms Typ. 7.0 VA 4 kV 2.5 kV 800 V 4 kVAC (rms) 4 kVAC (rms) Specifications are subject to change without notice (28.09.99) Dupline(R) is a registered trademark. A product of the CARLO GAVAZZI Group 8, SPST relays 8x1 (micro gap) 5 A/250 VAC (1250 VA) 0.25 A/250 VDC (62 W) 5 A/25 VDC (125 W) 2.5 A/230 VAC 5 A/24 VDC 30 x 106 operations 2.0 x 105 operations 7200 operations/h 4 kVAC (rms) 1 pulse train 1 Du line G 3830 5543 (R) Fieldbus General Specifications Mode of Operation Output OFF delay upon loss of Dupline(R) carrier Power ON delay Indication for Supply ON Dupline(R) carrier Output ON Environment Degree of protection Pollution degree Operating temperature Storage temperature Humidity (non-condensing) Mechanical resistance Shock Vibration Dimensions Material (see Technical information) Weight 8-channel receiver with 8 normally open contact outputs. Each output may be coded individually by means of the code programmer GAP 1605. For details, please refer to the respective data sheet. 20 ms Typ. 2 s LED, green LED, yellow LED, red (one per output) IP 20 3 (IEC 60664) -20 to +50C (-4 to +122F) -50 to +85C (-58 to +185F) 20 to 80% 15 G (11 ms) 2 G (6 to 55 Hz) The outputs are normally off. When a transmitter coded to the selected channel is activated, the output turns on and remains on until the respective channel becomes deactivated. Installationbus The default setting of the module is such that upon loss of Dupline(R) carrier all the outputs go off. Output connections Output 1: terminals 29 & 30 Output 2: terminals 31 & 32 Output 3: terminals 33 & 34 Output 4: terminals 35 & 36 Output 5: terminals 9 & 10 Output 6: terminals 11 & 12 Output 7: terminals 13 & 14 Output 8: terminals 15 & 16 H8-housing 800 g Operation Diagram Power supply Dupline(R) carrier Transmission on channel for output 1 Output 1 (term. 29 & 30) Transmission on chan. for output 2 Output 2 (term. 31 & 32) Accessories Wiring Diagram DIN-rail FMD 411 For further information see "Accessories". out out out out 5 6 7 8 Power supply out out out out 1 2 3 4 S: signal wire 2 Specifications are subject to change without notice (28.09.99) Dupline(R) is a registered trademark. A product of the CARLO GAVAZZI Group