JTV1G-TMP-12V - Panasonic - searchdatasheet.com

JT-V

SPECIFICATIONS

TYPICAL APPLICATIONS

• Oven

• Heating & ventilation

• Home appliance

SURGE VOLTAGE 6,000 V

30 AMP. RELAY JT-V RELAYS

PCB type

20.2±0.6

.795±.024

26.9±0.6

1.059±.024

31.9±0.6

1.256±.024

TMP type

27.9±0.6

1.096±.024

27.4±0.6

1.079±.024

32.2±0.6

1.268±.024

RoHS Directive compatibility information

http://www.nais-e.com/

FEATURES

• Surge withstand voltage: 6,000 V

• High switching capacity — 30 A for 1 Form A

•2 contact arrangements — 1 Form A or 1 Form C

• “TMP” types available

• UL/C-UL recognized

• Class F types standard

Contacts

* The life is for open venting-hole condition.

Coil at 20°C 68°F

Characteristics

#1 This value can change due to the switching frequency, environmental conditions,

and desired reliability level, therefore it is recommended to check this with the

actual load.

Remarks

* Speciﬁcations will vary with foreign standards certiﬁcation ratings.

*1Measurement at same location as “Initial breakdown voltage” section

*2Detection current: 10 mA

*3Ware is standard shock voltage of ±1.2 × 50µs according to JEC-212-1981.

*4Excluding contact bounce time

*5Half-wave pulse of sine wave: 11ms; detection time: 10µs

*6Half-wave pulse of sine wave: 6ms

*7Detection time: 10µs

*8Refer to 6. Conditions for operation, transport and storage mentioned in

AMBIENT ENVIRONMENT

PCB & TMP type

Arrangement 1 Form A 1 Form C

Initial contact resistance,

max.

(By voltage drop method,

6 V DC 1 A)

50 mΩ

Contact material AgSnO2 type

Rating

Max. switching

power 8310 VA N.C.: 2770 VA

N.O.: 5540 VA

Max. switching

voltage 277 V AC

Max. switching

current 30 A N.C.: 10 A

N.O.: 20 A

Min. switching

capacity#1

(Reference

value)

100 mA, 5 V DC

Expected

life

Mechanical Min. 1×107

Electrical

(Resistive load) 20 A 277 V AC

Min. 1×105*

N.O.:

20 A 277 V AC

Min. 1×105*

N.C.:

10 A 277 V AC

Min. 1×105*

PCB & TMP type

Nominal operating power Approx. 1,000 mW

PCB & TMP type

Initial insulation resistance*1Min. 100 MΩ at 500 V DC

Initial

breakdown

voltage*2

Between contacts 1,200 Vrms

Between contacts

and coil 3,500 Vrms

Initial surge voltage between

contact and coil 6,000 V*3

Operate time*4

(at nominal voltage) Max. 15 ms

Release time (without diode)*4

(at nominal voltage) Max. 10 ms

Shock

resistance

Functional*598 m/s2 {10 G}

Destructive*6980 m/s2 {100 G}

Vibration

resistance

Functional*710 to 55 Hz

at double amplitude of 1.5 mm

Destructive 10 to 55 Hz

at double amplitude of 2 mm

Conditions for

operation,

transport and

storage*8 (Not

freezing and

condensing at

low temperature)

Ambient

temp. –55°C to +85°C

–67°F to +185°F

Humidity 5 to 85% R.H.

Unit weight PCB type: Approx. 25 g (.88 oz)

TMP type: Approx. 30 g (1.06 oz)

JT-V

ORDERING INFORMATION

JT-V Relays (PCB and TMP type)

COIL DATA (at 20°C 68°F)

DIMENSIONS mm inch

Nominal

voltage, V DC Pick-up voltage,

V DC (max.) (Initial) Drop-out voltage,

V DC (min.) (Initial)

Coil resistance, Ω (±10%) Nominal operating power, mW Max. allowable voltage,

V DC (at 70°C 158°F)

PCB & TMP PCB & TMP

12 9.0 1.2 144

1000

14.4

18 13.5 1.8 324 21.6

24 18.0 2.4 576 28.8

48 36.0 4.8 2304 57.6

Contact arrangement

1a:

1: 1 Form A

1 Form C S:

G: Sealed type

Dust cover type

Protective construction Mounting classification

PA:

TMP: PCB type

TMP type

Coil voltage

DC 12, 18, 24,

48 V

TMPS1aJTV 12V

Notes: 1. UL/C-UL approved type is standard.

2. 5 V, 6 V, 9 V DC types are also available. Please contact us for details.

3. Standard packing: PCB type: Carton: 50 pcs. Case: 500 pcs.

TMP type: Carton: 50 pcs. Case: 300 pcs.

2-0.8×1.6

Terminals

1.14×1.14

Terminal

2-0.6 dia.

Coil Terminals

20.2±0.626.9±0.6 3.6±0.5

31.9±0.6

1 Form C

7.62

15.24 2.54

17.78

13.97

3.81 2-1.1 dia.

2-.043 dia.

3-2.1 dia.

3-.083 dia.

PC board pattern (Bottom view)

Schematic (Bottom view)

0.8×1.6

Terminals

1.14×1.14

Terminal

2-0.6 dia.

Coil Terminals

20.2±0.626.9±0.6 3.6±0.5

31.9±0.6

1 Form A

15.24

2.54

17.78

13.97

3.81 2-1.1 dia.

2-.043 dia.

2-2.1 dia.

2-.083 dia.

PC board pattern (Bottom view)

Schematic (Bottom view)

1. PCB type

Tolerance: ±0.1 ±.004

2-.031×.063

.045×.045 2-.024 dia.

.795±.0241.059±.024 .142±.020

1.256±.024

.300

.600 .100

.700

.550

.150

.600

.100

.700

.550

.150

.031×.063

.045×.045 2-.024 dia.

.795±.0241.059±.024 .142±.020

1.256±.024

COM

2-0.8×1.6

Terminals

27.9±0.6

27.4±0.6

6.35±0.1

3.6±0.5

32.2±0.6

1 Form C

7.62

15.24

17.78

13.97

3.81 2-1.1 dia.

2-.043 dia.

PC board pattern (Bottom view)

Schematic

0.8±0.1

2-0.6 dia.

Coil Terminals

1.14×1.14

Terminal

N.C.

N.O.

COM

(Top view) (Bottom view)

6.20±0.5

10.93±0.5

3-2.1 dia.

3-.083 dia.

0.8×1.6

Terminals

27.9±0.6

27.4±0.6

6.35±0.1

3.6±0.5

32.2±0.6

1 Form A

17.78

13.97

3.81 2-1.1 dia.

2-.043 dia.

PC board pattern (Bottom view)

2. TMP type

Schematic

0.8±0.1

2-0.6 dia.

Coil Terminals

1.14×1.14

Terminal

N.O.

COM

(Top view) (Bottom view)

6.20±0.5

10.93±0.5

2-2.1 dia.

2-.083 dia.

2.54

15.24

Tolerance: ±0.1 ±.004

2-.031×.063

2-.024 dia.

.045×.045

1.096±.024

1.079±.024 .142±.020

1.268±.024

.031±.004

.250±.004

2.54

.300

.600

.700

.550

.150

.244±.020

.430±.020

.100

.031×.063

2-.024 dia.

.045×.045

1.096±.024

1.079±.024 .142±.020

1.268±.024

.031±.004

.250±.004

.700

.550

.150

.244±.020

.430±.020

.100

.600

JT-V

REFERENCE DATA

For Cautions for Use, see Relay Technical Information

1. Change of rate of pick-up and drop-out

voltage (at 20°C 68°F)

Sample: JTV1S-TMP-24V (6 pcs.)

2. Distribution frequency of pick-up voltage

(at 20°C 68°F)

Sample: JTV1S-TMP-12V (100 pcs.)

3. Distribution frequency of drop-out voltage

(at 20°C 68°F)

Sample: JTV1S-TMP-12V (100 pcs.)

Drop-out voltage

Pick-up voltage

–10

–20

–30

–40

45 65 85 105

–55 –35 –15 5

+77

–67 –31 +5 +41 +113+149+185+221

Rate of

change, %

Ambient

temperature, °C °F

5.9 6.1 6.3 6.5 6.7 6.9 7.0

Distribution frequency

Pick-up voltage, V

Distribution frequency

Drop-out voltage, V

2.7 2.9 3.1 3.3 3.5 3.7 3.8

4.-(1) Coil temperature rise (TMP type)*

Ambient temperature: 25°C 77°F

Sample: JTV1aS-TMP-12V (6 pcs.)

* Coil temperature rise of sealed types are same as

data of the dust cover type.

Ambient temperature: 85°C 185°F

Sample: JTV1aS-TMP-12V (6 pcs.)

Temperature rise, °C

Coil applied voltage,%V

090 100 120 140

20 A

10 A

Temperature rise, °C

Coil applied voltage,%V

090 100 120 140

20 A

10 A