JT-V SURGE VOLTAGE 6,000 V 30 AMP. RELAY 31.90.6 1.256.024 26.90.6 1.059.024 32.20.6 1.268.024 27.40.6 1.079.024 20.20.6 .795.024 27.90.6 1.096.024 PCB type JT-V RELAYS FEATURES * Surge withstand voltage: 6,000 V * High switching capacity -- 30 A for 1 Form A * 2 contact arrangements -- 1 Form A or 1 Form C * "TMP" types available * UL/C-UL recognized * Class F types standard TMP type RoHS Directive compatibility information http://www.nais-e.com/ SPECIFICATIONS Contacts Arrangement Initial contact resistance, max. (By voltage drop method, 6 V DC 1 A) Contact material Max. switching power Max. switching voltage Max. switching Rating current Min. switching capacity#1 (Reference value) Mechanical Expected Electrical life (Resistive load) Characteristics PCB & TMP type 1 Form A 1 Form C 50 m AgSnO2 type N.C.: 2770 VA 8310 VA N.O.: 5540 VA 277 V AC N.C.: 10 A N.O.: 20 A 30 A 100 mA, 5 V DC Vibration resistance 3,500 Vrms 6,000 V*3 Max. 15 ms Max. 10 ms 98 m/s2 {10 G} 980 m/s2 {100 G} 10 to 55 Hz at double amplitude of 1.5 mm 10 to 55 Hz at double amplitude of 2 mm Functional*7 Destructive Min. 1x107 20 A 277 V AC Min. 1x105* N.O.: 20 A 277 V AC Min. 1x105* N.C.: 10 A 277 V AC Min. 1x105* * The life is for open venting-hole condition. Conditions for operation, transport and storage*8 (Not freezing and condensing at low temperature) Unit weight Coil at 20C 68F Nominal operating power PCB & TMP type Min. 100 M at 500 V DC 1,200 Vrms Initial insulation resistance*1 Between contacts Initial breakdown Between contacts voltage*2 and coil Initial surge voltage between contact and coil Operate time*4 (at nominal voltage) Release time (without diode)*4 (at nominal voltage) Functional*5 Shock resistance Destructive*6 PCB & TMP type Approx. 1,000 mW Ambient temp. -55C to +85C -67F to +185F Humidity 5 to 85% R.H. PCB type: Approx. 25 g (.88 oz) TMP type: Approx. 30 g (1.06 oz) #1 This value can change due to the switching frequency, environmental conditions, and desired reliability level, therefore it is recommended to check this with the actual load. Remarks * Specifications will vary with foreign standards certification ratings. *1 Measurement at same location as "Initial breakdown voltage" section *2 Detection current: 10 mA *3 Ware is standard shock voltage of 1.2 x 50s according to JEC-212-1981. *4 Excluding contact bounce time *5 Half-wave pulse of sine wave: 11ms; detection time: 10s *6 Half-wave pulse of sine wave: 6ms *7 Detection time: 10s *8 Refer to 6. Conditions for operation, transport and storage mentioned in AMBIENT ENVIRONMENT TYPICAL APPLICATIONS * Oven * Heating & ventilation * Home appliance All Rights Reserved (c) COPYRIGHT Matsushita Electric Works, Ltd. JT-V ORDERING INFORMATION JT-V Relays (PCB and TMP type) JTV 1a S TMP Contact arrangement Protective construction 1a: 1 Form A 1: 1 Form C S: Sealed type G: Dust cover type 12V Mounting classification Coil voltage PA: PCB type TMP: TMP type DC 12, 18, 24, 48 V Notes: 1. UL/C-UL approved type is standard. 2. 5 V, 6 V, 9 V DC types are also available. Please contact us for details. 3. Standard packing: PCB type: Carton: 50 pcs. Case: 500 pcs. TMP type: Carton: 50 pcs. Case: 300 pcs. COIL DATA (at 20C 68F) Coil resistance, (10%) PCB & TMP 144 324 576 2304 Nominal Pick-up voltage, Drop-out voltage, voltage, V DC V DC (max.) (Initial) V DC (min.) (Initial) 12 18 24 48 9.0 13.5 18.0 36.0 1.2 1.8 2.4 4.8 Nominal operating power, mW Max. allowable voltage, V DC (at 70C 158F) PCB & TMP 14.4 21.6 1000 28.8 57.6 DIMENSIONS mm inch 1. PCB type 26.90.6 1.059.024 1 Form A 3.60.5 .142.020 20.20.6 .795.024 Terminals 0.8x1.6 .031x.063 26.90.6 1.059.024 1 Form C Terminals 2-0.8x1.6 2-.031x.063 3.60.5 .142.020 20.20.6 .795.024 31.90.6 1.256.024 31.90.6 1.256.024 PC board pattern (Bottom view) Terminal 1.14x1.14 .045x.045 2-2.1 dia. 2-.083 dia. 2.54 .100 Coil Terminals 2-0.6 dia. 2-.024 dia. Schematic (Bottom view) 15.24 .600 PC board pattern (Bottom view) Terminal 1.14x1.14 .045x.045 3-2.1 dia. 3-.083 dia. 7.62 .300 Coil Terminals 2-0.6 dia. 2-.024 dia. Schematic (Bottom view) 15.24 2.54 .600 .100 3.81 .150 3.81 .150 2-1.1 dia. 2-.043 dia. 13.97 .550 17.78 .700 2. TMP type 1 Form A 0.80.1 .031.004 Terminals 0.8x1.6 .031x.063 Terminal 1.14x1.14 .045x.045 3.60.5 .142.020 27.40.6 1.079.024 6.350.1 .250.004 2-1.1 dia. 2-.043 dia. 13.97 .550 17.78 .700 27.90.6 1.096.024 Tolerance: 0.1 .004 1 Form C 0.80.1 .031.004 Terminals 2-0.8x1.6 2-.031x.063 Terminal 1.14x1.14 .045x.045 3.60.5 .142.020 27.40.6 1.079.024 6.350.1 .250.004 27.90.6 1.096.024 NC NO NC NO 32.20.6 1.268.024 0.80.1 .031.004 32.20.6 1.268.024 COM COM Coil Terminals 2-0.6 dia. 2-.024 dia. PC board pattern (Bottom view) 6.200.5 .244.020 2-2.1 dia. 2-.083 dia. 2.54 .100 Schematic 10.930.5 .430.020 Coil Terminals 2-0.6 dia. 2-.024 dia. PC board pattern (Bottom view) 6.200.5 .244.020 3-2.1 dia. 3-.083 dia. Schematic 10.930.5 .430.020 7.62 .300 N.C. 15.24 .600 15.24 2.54 .600 .100 N.O. N.O. COM 3.81 .150 13.97 .550 17.78 .700 COM 2-1.1 dia. 2-.043 dia. 3.81 .150 (Top view) (Bottom view) 13.97 .550 17.78 .700 2-1.1 dia. 2-.043 dia. All Rights Reserved (c) COPYRIGHT Matsushita Electric Works, Ltd. (Top view) (Bottom view) Tolerance: 0.1 .004 JT-V REFERENCE DATA 1. Change of rate of pick-up and drop-out voltage (at 20C 68F) 2. Distribution frequency of pick-up voltage (at 20C 68F) 3. Distribution frequency of drop-out voltage (at 20C 68F) Sample: JTV1S-TMP-24V (6 pcs.) Sample: JTV1S-TMP-12V (100 pcs.) Sample: JTV1S-TMP-12V (100 pcs.) 40 30 20 10 Pick-up voltage -55 -35 -15 5 25 45 65 85 105 -67 -31 +5 +41 +113+149+185+221 +77 Ambient -10 temperature, C F -20 Distribution frequency Drop-out voltage Distribution frequency Rate of change, % 40 40 30 20 20 10 10 -30 30 -40 0 5.9 6.1 6.3 6.5 6.7 6.9 7.0 0 Pick-up voltage, V Drop-out voltage, V 4.-(1) Coil temperature rise (TMP type)* Ambient temperature: 25C 77F Sample: JTV1aS-TMP-12V (6 pcs.) Ambient temperature: 85C 185F Sample: JTV1aS-TMP-12V (6 pcs.) 80 20 A 60 10 A 40 20 A 60 10 A 40 20 20 0 Temperature rise, C Temperature rise, C 80 0 90 100 120 140 Coil applied voltage,%V 0 0 90 100 120 2.7 2.9 3.1 3.3 3.5 3.7 3.8 140 Coil applied voltage,%V * Coil temperature rise of sealed types are same as data of the dust cover type. For Cautions for Use, see Relay Technical Information All Rights Reserved (c) COPYRIGHT Matsushita Electric Works, Ltd.