To our customers, Old Company Name in Catalogs and Other Documents On April 1st, 2010, NEC Electronics Corporation merged with Renesas Technology Corporation, and Renesas Electronics Corporation took over all the business of both companies. Therefore, although the old company name remains in this document, it is a valid Renesas Electronics document. We appreciate your understanding. Renesas Electronics website: http://www.renesas.com April 1st, 2010 Renesas Electronics Corporation Issued by: Renesas Electronics Corporation (http://www.renesas.com) Send any inquiries to http://www.renesas.com/inquiry. Notice 1. 2. 3. 4. 5. 6. 7. All information included in this document is current as of the date this document is issued. Such information, however, is subject to change without any prior notice. Before purchasing or using any Renesas Electronics products listed herein, please confirm the latest product information with a Renesas Electronics sales office. Also, please pay regular and careful attention to additional and different information to be disclosed by Renesas Electronics such as that disclosed through our website. Renesas Electronics does not assume any liability for infringement of patents, copyrights, or other intellectual property rights of third parties by or arising from the use of Renesas Electronics products or technical information described in this document. No license, express, implied or otherwise, is granted hereby under any patents, copyrights or other intellectual property rights of Renesas Electronics or others. You should not alter, modify, copy, or otherwise misappropriate any Renesas Electronics product, whether in whole or in part. Descriptions of circuits, software and other related information in this document are provided only to illustrate the operation of semiconductor products and application examples. You are fully responsible for the incorporation of these circuits, software, and information in the design of your equipment. Renesas Electronics assumes no responsibility for any losses incurred by you or third parties arising from the use of these circuits, software, or information. When exporting the products or technology described in this document, you should comply with the applicable export control laws and regulations and follow the procedures required by such laws and regulations. You should not use Renesas Electronics products or the technology described in this document for any purpose relating to military applications or use by the military, including but not limited to the development of weapons of mass destruction. Renesas Electronics products and technology may not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited under any applicable domestic or foreign laws or regulations. Renesas Electronics has used reasonable care in preparing the information included in this document, but Renesas Electronics does not warrant that such information is error free. Renesas Electronics assumes no liability whatsoever for any damages incurred by you resulting from errors in or omissions from the information included herein. Renesas Electronics products are classified according to the following three quality grades: "Standard", "High Quality", and "Specific". The recommended applications for each Renesas Electronics product depends on the product's quality grade, as indicated below. You must check the quality grade of each Renesas Electronics product before using it in a particular application. You may not use any Renesas Electronics product for any application categorized as "Specific" without the prior written consent of Renesas Electronics. Further, you may not use any Renesas Electronics product for any application for which it is not intended without the prior written consent of Renesas Electronics. Renesas Electronics shall not be in any way liable for any damages or losses incurred by you or third parties arising from the use of any Renesas Electronics product for an application categorized as "Specific" or for which the product is not intended where you have failed to obtain the prior written consent of Renesas Electronics. The quality grade of each Renesas Electronics product is "Standard" unless otherwise expressly specified in a Renesas Electronics data sheets or data books, etc. "Standard": 8. 9. 10. 11. 12. Computers; office equipment; communications equipment; test and measurement equipment; audio and visual equipment; home electronic appliances; machine tools; personal electronic equipment; and industrial robots. "High Quality": Transportation equipment (automobiles, trains, ships, etc.); traffic control systems; anti-disaster systems; anticrime systems; safety equipment; and medical equipment not specifically designed for life support. "Specific": Aircraft; aerospace equipment; submersible repeaters; nuclear reactor control systems; medical equipment or systems for life support (e.g. artificial life support devices or systems), surgical implantations, or healthcare intervention (e.g. excision, etc.), and any other applications or purposes that pose a direct threat to human life. You should use the Renesas Electronics products described in this document within the range specified by Renesas Electronics, especially with respect to the maximum rating, operating supply voltage range, movement power voltage range, heat radiation characteristics, installation and other product characteristics. Renesas Electronics shall have no liability for malfunctions or damages arising out of the use of Renesas Electronics products beyond such specified ranges. Although Renesas Electronics endeavors to improve the quality and reliability of its products, semiconductor products have specific characteristics such as the occurrence of failure at a certain rate and malfunctions under certain use conditions. Further, Renesas Electronics products are not subject to radiation resistance design. Please be sure to implement safety measures to guard them against the possibility of physical injury, and injury or damage caused by fire in the event of the failure of a Renesas Electronics product, such as safety design for hardware and software including but not limited to redundancy, fire control and malfunction prevention, appropriate treatment for aging degradation or any other appropriate measures. Because the evaluation of microcomputer software alone is very difficult, please evaluate the safety of the final products or system manufactured by you. Please contact a Renesas Electronics sales office for details as to environmental matters such as the environmental compatibility of each Renesas Electronics product. Please use Renesas Electronics products in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances, including without limitation, the EU RoHS Directive. Renesas Electronics assumes no liability for damages or losses occurring as a result of your noncompliance with applicable laws and regulations. This document may not be reproduced or duplicated, in any form, in whole or in part, without prior written consent of Renesas Electronics. Please contact a Renesas Electronics sales office if you have any questions regarding the information contained in this document or Renesas Electronics products, or if you have any other inquiries. (Note 1) "Renesas Electronics" as used in this document means Renesas Electronics Corporation and also includes its majorityowned subsidiaries. (Note 2) "Renesas Electronics product(s)" means any product developed or manufactured by or for Renesas Electronics. R1LP0408C-C Series 4M SRAM (512-kword x 8-bit) REJ03C0077-0200Z Rev. 2.00 May.26.2004 Description The R1LP0408C-C is a 4-Mbit static RAM organized 512-kword x 8-bit. R1LP0408C-C Series has realized higher density, higher performance and low power consumption by employing CMOS process technology (6-transistor memory cell). The R1LP0408C-C Series offers low power standby power dissipation; therefore, it is suitable for battery backup systems. It has packaged in 32-pin SOP, 32-pin TSOP II. Features * Single 5 V supply: 5 V 10% * Access time: 55/70 ns (max) * Power dissipation: Active: 10 mW/MHz (typ) Standby: 4 W (typ) * Completely static memory. No clock or timing strobe required * Equal access and cycle times * Common data input and output. Three state output * Directly TTL compatible. All inputs and outputs * Battery backup operation. * Operating temperature: -20 to +70C Rev.2.00, May.26.2004, page 1 of 12 R1LP0408C-C Series Ordering Information Type No. Access time Package R1LP0408CSP-5SC 55 ns 525-mil 32-pin plastic SOP (32P2M-A) R1LP0408CSP-7LC 70 ns R1LP0408CSB-5SC 55 ns R1LP0408CSB-7LC 70 ns R1LP0408CSC-5SC 55 ns R1LP0408CSC-7LC 70 ns Rev.2.00, May.26.2004, page 2 of 12 400-mil 32-pin plastic TSOP II (32P3Y-H) 400-mil 32-pin plastic TSOP II reverse (32P3Y-J) R1LP0408C-C Series Pin Arrangement 32-pin SOP 32-pin TSOP A18 A16 A14 A12 A7 A6 A5 A4 A3 A2 A1 A0 I/O0 I/O1 I/O2 VSS 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 32 31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 (Top view) Pin Description Pin name Function A0 to A18 Address input I/O0 to I/O7 Data input/output CS# (CS) Chip select OE# (OE) Output enable WE# (WE) Write enable VCC Power supply VSS Ground Rev.2.00, May.26.2004, page 3 of 12 32-pin TSOP (reverse) VCC A15 A17 WE# A13 A8 A9 A11 OE# A10 CS# I/O7 I/O6 I/O5 I/O4 I/O3 VCC A15 A17 WE# A13 A8 A9 A11 OE# A10 CS# I/O7 I/O6 I/O5 I/O4 I/O3 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 32 31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 (Top view) A18 A16 A14 A12 A7 A6 A5 A4 A3 A2 A1 A0 I/O0 I/O1 I/O2 VSS R1LP0408C-C Series Block Diagram LSB MSB V CC A11 A9 A8 A15 A18 A10 A13 A17 A16 A14 A12 V SS Row Decoder I/O0 * * * * * Memory Matrix 2,048 x 2,048 * * Column I/O Input Data Control Column Decoder I/O7 LSB A3 A2A1A0 A4 A5 A6 A7 MSB ** CS# WE# Timing Pulse Generator Read/Write Control OE# Rev.2.00, May.26.2004, page 4 of 12 * * R1LP0408C-C Series Operation Table WE# CS# OE# Mode VCC current I/O0 to I/O7 Ref. cycle x H x Not selected ISB, ISB1 High-Z H L H Output disable ICC High-Z H L L Read ICC Dout Read cycle L L H Write ICC Din Write cycle (1) L L L Write ICC Din Write cycle (2) Note: H: VIH, L: VIL, x: VIH or VIL Absolute Maximum Ratings Parameter Symbol Value Power supply voltage relative to VSS VCC -0.5 to +7.0 Unit V 1 2 Terminal voltage on any pin relative to VSS VT -0.5* to VCC + 0.3* Power dissipation PT 0.7 W Operating temperature Topr -20 to +70 C Storage temperature range Tstg -65 to +150 C Storage temperature range under bias Tbias -20 to +85 C V Notes: 1. VT min: -3.0 V for pulse half-width 30 ns. 2. Maximum voltage is +7.0 V. DC Operating Conditions (Ta = -20 to +70C) Parameter Symbol Min Typ Max Unit Supply voltage VCC 4.5 5.0 5.5 V VSS 0 0 0 V VIH 2.2 VCC + 0.3 V 0.8 V Input high voltage Input low voltage Note: VIL -0.3* 1. VIL min: -3.0 V for pulse half-width 30 ns. Rev.2.00, May.26.2004, page 5 of 12 1 R1LP0408C-C Series DC Characteristics Parameter Symbol Min Typ Input leakage current |ILI| 1 A Vin = VSS to VCC Output leakage current |ILO| 1 A CS# = VIH or OE# = VIH or WE# = VIL or VI/O = VSS to VCC Operating current ICC 1.5*1 3 mA CS# = VIL, Others = VIH/ VIL, II/O = 0 mA Average operating current ICC1 8*1 25 mA Min. cycle, duty = 100%, CS# = VIL, Others = VIH/VIL II/O = 0 mA ICC2 2*1 5 mA Cycle time = 1 s, duty = 100%, II/O = 0 mA, CS# 0.2 V, VIH VCC - 0.2 V, VIL 0.2 V ISB 0.1*1 0.5 mA CS# = VIH ISB1 Vin 0 V, CS# VCC - 0.2 V Standby current Standby current -5SC to +70C to +40C ISB1 Max Unit Test conditions 8 A 2 3 A 1 1.0* to +25C ISB1 0.8* 3 A to +70C ISB1 16 A to +40C ISB1 1.0*2 10 A ISB1 1 0.8* 10 A Output low voltage VOL 0.4 V IOL = 2.1 mA Output high voltage VOH 2.4 V IOH = -1.0 mA VOH2 2.6 V IOH = -0.1 mA -7LC to +25C Notes: 1. Typical values are at VCC = 5.0 V, Ta = +25C and specified loading, and not guaranteed. 2. Typical values are at VCC = 5.0 V, Ta = +40C and specified loading, and not guaranteed. Capacitance (Ta = +25C, f = 1.0 MHz) Parameter Symbol Min Typ Max Unit Test conditions Note Input capacitance Cin 8 pF Vin = 0 V 1 Input/output capacitance CI/O 10 pF VI/O = 0 V 1 Note: 1. This parameter is sampled and not 100% tested. Rev.2.00, May.26.2004, page 6 of 12 R1LP0408C-C Series AC Characteristics (Ta = -20 to +70C, VCC = 5 V 10%, unless otherwise noted.) Test Conditions * * * * Input pulse levels: VIL = 0.4 V, VIH = 2.4 V Input rise and fall time: 5 ns Input and output timing reference levels: 1.5 V Output load: 1 TTL Gate + CL (50 pF) (R1LP0408C-5SC) 1 TTL Gate + CL (100 pF) (R1LP0408C-7LC) (Including scope and jig) Read Cycle R1LP0408C-C -5SC -7LC Parameter Symbol Min Max Min Max Unit Read cycle time tRC 55 70 ns Address access time tAA 55 70 ns Chip select access time tCO 55 70 ns Output enable to output valid tOE 25 35 ns Chip select to output in low-Z tLZ 10 10 ns 2 Output enable to output in low-Z tOLZ 5 5 ns 2 Chip deselect to output in high-Z tHZ 0 20 0 25 ns 1, 2 Output disable to output in high-Z tOHZ 0 20 0 25 ns 1, 2 Output hold from address change tOH 10 10 ns Rev.2.00, May.26.2004, page 7 of 12 Notes R1LP0408C-C Series Write Cycle R1LP0408C-C -5SC -7LC Parameter Symbol Min Max Min Max Unit Notes Write cycle time tWC 55 70 ns Chip selection to end of write tCW 50 60 ns 4 Address setup time tAS 0 0 ns 5 Address valid to end of write tAW 50 60 ns Write pulse width tWP 40 50 ns 3, 12 Write recovery time tWR 0 0 ns 6 Write to output in high-Z tWHZ 0 20 0 25 ns 1, 2, 7 Data to write time overlap tDW 25 30 ns Data hold from write time tDH 0 0 ns Output active from end of write tOW 5 5 ns 2 Output disable to output in high-Z tOHZ 0 20 0 25 ns 1, 2, 7 Notes: 1. tHZ, tOHZ and tWHZ are defined as the time at which the outputs achieve the open circuit conditions and are not referred to output voltage levels. 2. This parameter is sampled and not 100% tested. 3. A write occurs during the overlap (tWP) of a low CS# and a low WE#. A write begins at the later transition of CS# going low or WE# going low. A write ends at the earlier transition of CS# going high or WE# going high. tWP is measured from the beginning of write to the end of write. 4. tCW is measured from CS# going low to the end of write. 5. tAS is measured from the address valid to the beginning of write. 6. tWR is measured from the earlier of WE# or CS# going high to the end of write cycle. 7. During this period, I/O pins are in the output state so that the input signals of the opposite phase to the outputs must not be applied. 8. If the CS# low transition occurs simultaneously with the WE# low transition or after the WE# transition, the output remain in a high impedance state. 9. Dout is the same phase of the write data of this write cycle. 10. Dout is the read data of next address. 11. If CS# is low during this period, I/O pins are in the output state. Therefore, the input signals of the opposite phase to the outputs must not be applied to them. 12. In the write cycle with OE# low fixed, tWP must satisfy the following equation to avoid a problem of data bus contention. tWP tDW min + tWHZ max Rev.2.00, May.26.2004, page 8 of 12 R1LP0408C-C Series Timing Waveform Read Timing Waveform (WE# = VIH) tRC Address Valid address tAA tCO CS# tLZ tHZ tOE tOLZ OE# tOHZ Dout High impedance Valid data tOH Rev.2.00, May.26.2004, page 9 of 12 R1LP0408C-C Series Write Timing Waveform (1) (OE# Clock) tWC Address Valid address tAW tWR OE# tCW CS# *8 tWP tAS WE# tOHZ Dout High impedance tDW Din Rev.2.00, May.26.2004, page 10 of 12 Valid data tDH R1LP0408C-C Series Write Timing Waveform (2) (OE# Low Fixed) tWC Address Valid address tCW tWR CS# *8 tAW tWP WE# tOH tAS tOW tWHZ *9 Dout High impedance tDW tDH *11 Din Rev.2.00, May.26.2004, page 11 of 12 Valid data *10 R1LP0408C-C Series Low VCC Data Retention Characteristics (Ta = -20 to +70C) Parameter Symbol Min Typ VCC for data retention VDR 2 ICCDR Data retention current -5SC to +70C to +40C -7LC ICCDR VCC = 3.0 V, Vin 0 V 1.0* 3 A CS# VCC - 0.2 V 1 3 A 16 A 10 A 0.8* to +70C ICCDR to +25C Chip deselect to data retention time Operation recovery time CS# VCC - 0.2 V, Vin 0 V A V 8 ICCDR ICCDR 2 to +25C to +40C Max Unit Test conditions*3 1.0* 2 1 ICCDR 0.8* 10 A tCDR 0 ns tRC* ns tR 4 See retention waveform Notes: 1. Typical values are at VCC = 3.0 V, Ta = +25C and specified loading, and not guaranteed. 2. Typical values are at VCC = 3.0 V, Ta = +40C and specified loading, and not guaranteed. 3. CS# controls address buffer, WE# buffer, OE# buffer, and Din buffer. In data retention mode, Vin levels (address, WE#, OE#, I/O) can be in the high impedance state. 4. tRC = read cycle time. Low VCC Data Retention Timing Waveform (CS# Controlled) tCDR Data retention mode VCC 4.5 V 2.2 V VDR CS# 0V Rev.2.00, May.26.2004, page 12 of 12 CS# VCC - 0.2 V tR Revision History Rev. Date R1LP0408C-C Series Data Sheet Contents of Modification Page Description 1.00 Aug.01.2003 Initial issue 2.00 May.26.2004 6 DC characteristics -5SC and -7LC items' description are divided. 12 Low VCC Data Retention Characteristics -5SC and -7LC items' description are divided. 12 Low VCC Data Retention Timing Waveform 2.4 V to 2.2 V Sales Strategic Planning Div. Nippon Bldg., 2-6-2, Ohte-machi, Chiyoda-ku, Tokyo 100-0004, Japan Keep safety first in your circuit designs! 1. Renesas Technology Corp. puts the maximum effort into making semiconductor products better and more reliable, but there is always the possibility that trouble may occur with them. Trouble with semiconductors may lead to personal injury, fire or property damage. Remember to give due consideration to safety when making your circuit designs, with appropriate measures such as (i) placement of substitutive, auxiliary circuits, (ii) use of nonflammable material or (iii) prevention against any malfunction or mishap. Notes regarding these materials 1. These materials are intended as a reference to assist our customers in the selection of the Renesas Technology Corp. product best suited to the customer's application; they do not convey any license under any intellectual property rights, or any other rights, belonging to Renesas Technology Corp. or a third party. 2. Renesas Technology Corp. assumes no responsibility for any damage, or infringement of any third-party's rights, originating in the use of any product data, diagrams, charts, programs, algorithms, or circuit application examples contained in these materials. 3. All information contained in these materials, including product data, diagrams, charts, programs and algorithms represents information on products at the time of publication of these materials, and are subject to change by Renesas Technology Corp. without notice due to product improvements or other reasons. It is therefore recommended that customers contact Renesas Technology Corp. or an authorized Renesas Technology Corp. product distributor for the latest product information before purchasing a product listed herein. The information described here may contain technical inaccuracies or typographical errors. Renesas Technology Corp. assumes no responsibility for any damage, liability, or other loss rising from these inaccuracies or errors. Please also pay attention to information published by Renesas Technology Corp. by various means, including the Renesas Technology Corp. Semiconductor home page (http://www.renesas.com). 4. When using any or all of the information contained in these materials, including product data, diagrams, charts, programs, and algorithms, please be sure to evaluate all information as a total system before making a final decision on the applicability of the information and products. Renesas Technology Corp. assumes no responsibility for any damage, liability or other loss resulting from the information contained herein. 5. Renesas Technology Corp. semiconductors are not designed or manufactured for use in a device or system that is used under circumstances in which human life is potentially at stake. Please contact Renesas Technology Corp. or an authorized Renesas Technology Corp. product distributor when considering the use of a product contained herein for any specific purposes, such as apparatus or systems for transportation, vehicular, medical, aerospace, nuclear, or undersea repeater use. 6. The prior written approval of Renesas Technology Corp. is necessary to reprint or reproduce in whole or in part these materials. 7. If these products or technologies are subject to the Japanese export control restrictions, they must be exported under a license from the Japanese government and cannot be imported into a country other than the approved destination. Any diversion or reexport contrary to the export control laws and regulations of Japan and/or the country of destination is prohibited. 8. Please contact Renesas Technology Corp. for further details on these materials or the products contained therein. http://www.renesas.com RENESAS SALES OFFICES Renesas Technology America, Inc. 450 Holger Way, San Jose, CA 95134-1368, U.S.A Tel: <1> (408) 382-7500 Fax: <1> (408) 382-7501 Renesas Technology Europe Limited. Dukes Meadow, Millboard Road, Bourne End, Buckinghamshire, SL8 5FH, United Kingdom Tel: <44> (1628) 585 100, Fax: <44> (1628) 585 900 Renesas Technology Europe GmbH Dornacher Str. 3, D-85622 Feldkirchen, Germany Tel: <49> (89) 380 70 0, Fax: <49> (89) 929 30 11 Renesas Technology Hong Kong Ltd. 7/F., North Tower, World Finance Centre, Harbour City, Canton Road, Hong Kong Tel: <852> 2265-6688, Fax: <852> 2375-6836 Renesas Technology Taiwan Co., Ltd. FL 10, #99, Fu-Hsing N. Rd., Taipei, Taiwan Tel: <886> (2) 2715-2888, Fax: <886> (2) 2713-2999 Renesas Technology (Shanghai) Co., Ltd. 26/F., Ruijin Building, No.205 Maoming Road (S), Shanghai 200020, China Tel: <86> (21) 6472-1001, Fax: <86> (21) 6415-2952 Renesas Technology Singapore Pte. Ltd. 1, Harbour Front Avenue, #06-10, Keppel Bay Tower, Singapore 098632 Tel: <65> 6213-0200, Fax: <65> 6278-8001 (c) 2004. Renesas Technology Corp., All rights reserved. Printed in Japan. Colophon .1.0