IKP03N120H2, IKW03N120H2 IKB03N120H2 HighSpeed 2-Technology with soft, fast recovery anti-parallel EmCon HE diode * * Designed for: - SMPS - Lamp Ballast - ZVS-Converter C G 2nd generation HighSpeed-Technology for 1200V applications offers: - loss reduction in resonant circuits - temperature stable behavior - parallel switching capability - tight parameter distribution - Eoff optimized for IC =3A P-TO-220-3-1 (TO-220AB) E P-TO-263-3-2 (D-PAK) (TO-263AB) P-TO-247-3-1 (TO-247AC) * Complete product spectrum and PSpice Models : http://www.infineon.com/igbt/ Type VCE IC Eoff Tj Package Ordering Code IKW03N120H2 1200V 3A 0.15mJ 150C P-TO-247 Q67040-S4595 IKP03N120H2 1200V 3A 0.15mJ 150C P-TO-220-3-1 Q67040-S4594 150C 2 Q67040-S4597 IKB03N120H2 1200V 3A 0.15mJ P-TO-263 (D PAK) Maximum Ratings Parameter Symbol Value Unit Collector-emitter voltage VCE 1200 V Triangular collector current IC A TC = 25C, f = 140kHz 9.6 TC = 100C, f = 140kHz 3.9 Pulsed collector current, tp limited by Tjmax ICpuls 9.9 Turn off safe operating area - 9.9 VCE 1200V, Tj 150C Diode forward current IF TC = 25C 9.6 TC = 100C 3.9 Gate-emitter voltage VGE 20 V Power dissipation Ptot 62.5 W -40...+150 C TC = 25C Operating junction and storage temperature Tj , Tstg Soldering temperature, 1.6mm (0.063 in.) from case for 10s - 260 225 (for SMD) Power Semiconductors 1 Rev. 2, Mar-04 IKP03N120H2, IKW03N120H2 IKB03N120H2 Thermal Resistance Parameter Symbol Conditions Max. Value Unit RthJC 2.0 K/W RthJCD 3.2 Characteristic IGBT thermal resistance, junction - case Diode thermal resistance, junction - case Thermal resistance, RthJA P-TO-220-3-1 P-TO-247-3-1 62 RthJA P-TO-263 (D2PAK) 40 junction - ambient SMD version, device on PCB1) Electrical Characteristic, at Tj = 25 C, unless otherwise specified Parameter Symbol Conditions Value min. Typ. max. 1200 - - T j = 25 C - 2.2 2.8 T j = 15 0 C - 2.5 - V G E = 10V, I C = 3A , T j = 25 C - 2.4 - T j = 25 C - 2.0 2.5 T j = 15 0 C - 1.75 - 2.1 3 3.9 T j = 25 C - - 20 T j = 15 0 C - - 80 Unit Static Characteristic Collector-emitter breakdown voltage V ( B R ) C E S V G E = 0V, I C = 30 0A Collector-emitter saturation voltage VCE(sat) Diode forward voltage VF V V G E = 15V, I C = 3A V G E = 0, I F = 2A Gate-emitter threshold voltage VGE(th) I C = 90A ,V C E =V G E Zero gate voltage collector current ICES V C E = 1200V, V G E = 0V A Gate-emitter leakage current IGES V C E = 0V ,V G E = 2 0V - - 100 nA Transconductance gfs V C E = 20V, I C = 3A - 2 - S Input capacitance Ciss V C E = 25V, - 205 - pF Output capacitance Coss V G E = 0V, - 24 - Reverse transfer capacitance Crss f= 1 M Hz - 7 - Gate charge QGate V C C = 9 60V, I C = 3A - 22 - nC - 7 - nH Dynamic Characteristic V G E = 1 5V Internal emitter inductance measured 5mm (0.197 in.) from case LE P -T O - 2 20- 3- 1 P-TO-247-3-1 13 1) Device on 50mm*50mm*1.5mm epoxy PCB FR4 with 6cm2 (one layer, 70m thick) copper area for collector connection. PCB is vertical without blown air. Power Semiconductors 2 Rev. 2, Mar-04 IKP03N120H2, IKW03N120H2 IKB03N120H2 Switching Characteristic, Inductive Load, at Tj=25 C Parameter Symbol Conditions Value Unit min. typ. max. - 9.2 - - 5.2 - - 281 - - 29 - - 0.14 - - 0.15 - - 0.29 - 42 - ns IGBT Characteristic Turn-on delay time td(on) Rise time tr Turn-off delay time td(off) Fall time tf Turn-on energy Eon Turn-off energy Eoff Total switching energy Ets T j = 25 C, V C C = 8 00V, I C = 3A , V G E = 1 5V/ 0 V, R G = 8 2 , L 2 ) = 180nH, C 2 ) = 4 0 pF Energy losses include "tail" and diode 3) reverse recovery. ns mJ Anti-Parallel Diode Characteristic Diode reverse recovery time trr T j = 25 C, - Diode reverse recovery charge Qrr V R = 8 00V, I F = 3A, - 0.23 - C Diode peak reverse recovery current Irrm R G = 8 2 - 10.3 - A Diode current slope di F / dt - 993 - A/s Diode peak rate of fall of reverse recovery current during t b di r r / d t - 1180 - Switching Characteristic, Inductive Load, at Tj=150 C Parameter Symbol Conditions Value min. typ. max. - 9.4 - - 6.7 - - 340 - Unit IGBT Characteristic Turn-on delay time td(on) Rise time tr Turn-off delay time td(off) Fall time tf Turn-on energy Eon Turn-off energy Eoff Total switching energy Ets T j = 15 0 C V C C = 8 00V, I C = 3A , V G E = 1 5V/ 0 V, R G = 8 2 , L 2 ) = 180nH, C 2 ) = 4 0 pF Energy losses include "tail" and diode 3) reverse recovery. - 63 - - 0.22 - - 0.26 - - 0.48 - ns mJ Anti-Parallel Diode Characteristic Diode reverse recovery time trr T j = 15 0 C - 125 - ns Diode reverse recovery charge Qrr V R = 8 00V, I F = 3A, - 0.51 - C Diode peak reverse recovery current Irrm R G = 8 2 - 12 - A A/s Diode current slope di F / dt - 829 - Diode peak rate of fall of reverse recovery current during t b di r r / d t - 540 - 2) 3) Leakage inductance L and stray capacity C due to dynamic test circuit in figure E Commutation diode from device IKP03N120H2 Power Semiconductors 3 Rev. 2, Mar-04 IKP03N120H2, IKW03N120H2 IKB03N120H2 Switching Energy ZVT, Inductive Load Parameter Symbol Conditions Value min. typ. max. Unit IGBT Characteristic Turn-off energy Eoff mJ V C C = 8 00V, I C = 3A , V G E = 1 5V/ 0 V, R G = 8 2 , C r 2 ) = 4 nF Power Semiconductors T j = 25 C - 0.05 - T j = 15 0 C - 0.09 - 4 Rev. 2, Mar-04 IKP03N120H2, IKW03N120H2 IKB03N120H2 Ic 12A t p =1 s 10A 5 s IC, COLLECTOR CURRENT IC, COLLECTOR CURRENT 10A 8A TC=80C 6A TC=110C 4A 2A 0A 10Hz Ic 100Hz 10 s 1A 50 s 100 s 0,1A 500 s DC 1kHz 10kHz 100kHz 0,01A 1V 10V 100V 1000V VCE, COLLECTOR-EMITTER VOLTAGE Figure 2. Safe operating area (D = 0, TC = 25C, Tj 150C) f, SWITCHING FREQUENCY Figure 1. Collector current as a function of switching frequency (Tj 150C, D = 0.5, VCE = 800V, VGE = +15V/0V, RG = 82) 12A 60W 10A IC, COLLECTOR CURRENT Ptot, POWER DISSIPATION 50W 40W 30W 20W 10W 0W 25C 50C 75C 100C 6A 4A 2A 0A 25C 125C TC, CASE TEMPERATURE Figure 3. Power dissipation as a function of case temperature (Tj 150C) Power Semiconductors 8A 50C 75C 100C 125C 150C TC, CASE TEMPERATURE Figure 4. Collector current as a function of case temperature (VGE 15V, Tj 150C) 5 Rev. 2, Mar-04 IKP03N120H2, IKW03N120H2 10A IKB03N120H2 10A 9A 8A IC, COLLECTOR CURRENT IC, COLLECTOR CURRENT 8A VGE=15V 6A 12V 10V 8V 6V 4A 2A 7A 6A 5A VGE=15V 12V 10V 8V 6V 4A 3A 2A 1A 0A 0V 1V 2V 3V 4V 0A 0V 5V 12A IC, COLLECTOR CURRENT 10A 8A 6A Tj=+150C Tj=+25C 4A 2A 0A 3V 5V 7V 9V VGE, GATE-EMITTER VOLTAGE Figure 7. Typical transfer characteristics (VCE = 20V) Power Semiconductors 2V 3V 4V 5V VCE, COLLECTOR-EMITTER VOLTAGE Figure 6. Typical output characteristics (Tj = 150C) VCE(sat), COLLECTOR-EMITTER SATURATION VOLTAGE VCE, COLLECTOR-EMITTER VOLTAGE Figure 5. Typical output characteristics (Tj = 25C) 1V 3V IC=6A IC=3A 2V IC=1.5A 1V 0V -50C 0C 50C 100C 150C Tj, JUNCTION TEMPERATURE Figure 8. Typical collector-emitter saturation voltage as a function of junction temperature (VGE = 15V) 6 Rev. 2, Mar-04 IKP03N120H2, IKW03N120H2 1000ns IKB03N120H2 1000ns td(off) 100ns t, SWITCHING TIMES t, SWITCHING TIMES td(off) tf td(on) 10ns 100ns tf td(on) 10ns tr tr 1ns 0A 2A 1ns 4A IC, COLLECTOR CURRENT Figure 9. Typical switching times as a function of collector current (inductive load, Tj = 150C, VCE = 800V, VGE = +15V/0V, RG = 82, dynamic test circuit in Fig.E) 100ns tf td(on) tr 50C 75C 100C 125C 150C VGE(th), GATE-EMITTER THRESHOLD VOLTAGE t, SWITCHING TIMES 100 150 5V td(off) 1ns 25C 50 RG, GATE RESISTOR Figure 10. Typical switching times as a function of gate resistor (inductive load, Tj = 150C, VCE = 800V, VGE = +15V/0V, IC = 3A, dynamic test circuit in Fig.E) 1000ns 10ns 0 Tj, JUNCTION TEMPERATURE Figure 11. Typical switching times as a function of junction temperature (inductive load, VCE = 800V, VGE = +15V/0V, IC = 3A, RG = 82, dynamic test circuit in Fig.E) Power Semiconductors 4V max. 3V typ. 2V min. 1V 0V -50C 0C 50C 100C 150C Tj, JUNCTION TEMPERATURE Figure 12. Gate-emitter threshold voltage as a function of junction temperature (IC = 0.09mA) 7 Rev. 2, Mar-04 IKP03N120H2, IKW03N120H2 1.0mJ 1 1 Ets 0.7mJ 1 E, SWITCHING ENERGY LOSSES E, SWITCHING ENERGY LOSSES ) Eon and Ets include losses due to diode recovery. Eoff 0.5mJ 1 Eon 0.0mJ 0A 2A 1 E, SWITCHING ENERGY LOSSES Ets 1 0.4mJ 0.3mJ Eoff 1 Eon 0.2mJ 0.1mJ 25C 80C 125C 150C 0.4mJ 0.3mJ Eoff 1 Eon 50 100 150 200 250 IC=3A, TJ=150C 0.16mJ 0.12mJ IC=3A, TJ=25C 0.08mJ IC=1A, TJ=150C 0.04mJ IC=1A, TJ=25C 0.00mJ 0V/us 1000V/us 2000V/us 3000V/us dv/dt, VOLTAGE SLOPE Tj, JUNCTION TEMPERATURE Figure 15. Typical switching energy losses as a function of junction temperature (inductive load, VCE = 800V, VGE = +15V/0V, IC = 3A, RG = 82, dynamic test circuit in Fig.E ) Power Semiconductors 1 RG, GATE RESISTOR Figure 14. Typical switching energy losses as a function of gate resistor (inductive load, Tj = 150C, VCE = 800V, VGE = +15V/0V, IC = 3A, dynamic test circuit in Fig.E ) Eoff, TURN OFF SWITCHING ENERGY LOSS IC, COLLECTOR CURRENT Figure 13. Typical switching energy losses as a function of collector current (inductive load, Tj = 150C, VCE = 800V, VGE = +15V/0V, RG = 82, dynamic test circuit in Fig.E ) Ets 0.5mJ 0 4A ) Eon and Ets include losses due to diode recovery. ) Eon and Ets include losses due to diode recovery. 0.6mJ 0.2mJ 0.5mJ IKB03N120H2 Figure 16. Typical turn off switching energy loss for soft switching (dynamic test circuit in Fig. E) 8 Rev. 2, Mar-04 IKP03N120H2, IKW03N120H2 IKB03N120H2 20V D=0.5 0 VGE, GATE-EMITTER VOLTAGE VGE, GATE-EMITTER VOLTAGE 10 K/W 0.2 0.1 0.05 -1 10 K/W R,(K/W) 1.082517 0.328671 0.588811 0.02 0.01 , (s) 0.000795 0.000179 0.004631 R1 R2 -2 10 K/W single pulse 1s 10s C 1 = 1 /R 1 C 2 = 2 /R 2 100s 1ms 10ms 15V UCE=240V 10V UCE=960V 5V 0V 0nC 100ms QGE, GATE CHARGE Figure 17. Typical gate charge (IC = 3A) 10nC 20nC 30nC QGE, GATE CHARGE Figure 17. Typical gate charge (IC = 3A) 1000V 1nF 100pF Coss 10pF Crss 800V 2A 600V 400V 1A 200V 0A 0V 0V 10V 20V 0.0 30V VCE, COLLECTOR-EMITTER VOLTAGE Figure 18. Typical capacitance as a function of collector-emitter voltage (VGE = 0V, f = 1MHz) Power Semiconductors ICE COLLECTOR CURRENT C, CAPACITANCE Ciss VCE, COLLECTOR-EMITTER VOLTAGE 3A 0.2 0.4 0.6 0.8 1.0 1.2 tp, PULSE WIDTH Figure 20. Typical turn off behavior, hard switching (VGE=15/0V, RG=82, Tj = 150C, Dynamic test circuit in Figure E) 9 Rev. 2, Mar-04 IKP03N120H2, IKW03N120H2 2A 400V 1A 200V 0A 0V 0.0 0.4 0.8 1.2 1.6 2.0 2.4 ZthJC, TRANSIENT THERMAL RESISTANCE VGE, GATE-EMITTER VOLTAGE 600V ICE COLLECTOR CURRENT 3A 800V 2.8 tp, PULSE WIDTH 0 10 K/W 0.2 0.1 0.05 0.02 -1 10 K/W 0.01 R,(K/W) 1.9222 0.5852 0.7168 , (s) 7.04E-04 2.02E-04 4.39E-03 single pulse R 1 R2 C 1 = 1 /R 1 C 2 = 2 /R 2 1ms 10ms -2 10 K/W 10s 100s 0.6uC 180ns Qrr, REVERSE RECOVERY CHARGE 160ns TJ=150C 140ns 120ns 100ns 80ns 60ns TJ=25C 40ns 0Ohm D=0.5 tP, PULSE WIDTH Figure 22. Diode transient thermal impedance as a function of pulse width (D=tP/T) Figure 21. Typical turn off behavior, soft switching (VGE=15/0V, RG=82, Tj = 150C, Dynamic test circuit in Figure E) trr, REVERSE RECOVERY TIME IKB03N120H2 100Ohm 200Ohm 0.5uC 0.4uC 0.3uC TJ=25C 0.2uC 0Ohm 300Ohm RG, GATE RESISTANCE Figure 23. Typical reverse recovery time as a function of diode current slope VR=800V, IF=3A, Dynamic test circuit in Figure E) Power Semiconductors TJ=150C 100Ohm 200Ohm 300Ohm RG, GATE RESISTANCE Figure 24. Typical reverse recovery charge as a function of diode current slope (VR=800V, IF=3A, Dynamic test circuit in Figure E) 10 Rev. 2, Mar-04 IKP03N120H2, IKW03N120H2 IKB03N120H2 16A dirr/dt, DIODE PEAK RATE OF FALL OF REVERSE RECOVERY CURRENT 14A 12A T J =150C 10A T J =25C Irr, REVERSE RECOVERY CURRENT -600A/us 8A 0O hm 100O hm 200O hm TJ=150C -800A/us -1000A/us -1200A/us TJ=25C -1400A/us -1600A/us -1800A/us 0Ohm 300O hm RG, GATE RESISTANCE Figure 25. Typical reverse recovery current as a function of diode current slope (VR=800V, IF=3A, Dynamic test circuit in Figure E) 100Ohm 200Ohm 300Ohm RG, GATE RESISTANCE Figure 26. Typical diode peak rate of fall of reverse recovery current as a function of diode current slope (VR=800V, IF=3A, Dynamic test circuit in Figure E) 3.0V IF=4A T J =150C 2.5V VF, FORWARD VOLTAGE IF, FORWARD CURRENT 4A 2A T J =25C 0A 0V IF=2A IF=1A 2.0V 1.5V 1.0V 1V 2V -50C 3V VF, FORWARD VOLTAGE Figure 27. Typical diode forward current as a function of forward voltage Power Semiconductors 0C 50C 100C 150C TJ, JUNCTION TEMPERATURE Figure 28. Typical diode forward voltage as a function of junction temperature 11 Rev. 2, Mar-04 IKP03N120H2, IKW03N120H2 TO-220AB IKB03N120H2 dimensions [mm] symbol [inch] min max min max A 9.70 10.30 0.3819 0.4055 B 14.88 15.95 0.5858 0.6280 C 0.65 0.86 0.0256 0.0339 D 3.55 3.89 0.1398 0.1531 E 2.60 3.00 0.1024 0.1181 0.2677 F 6.00 6.80 0.2362 G 13.00 14.00 0.5118 0.5512 H 4.35 4.75 0.1713 0.1870 K 0.38 0.65 0.0150 0.0256 L 0.95 1.32 0.0374 0.0520 M 2.54 typ. 4.30 4.50 0.1693 0.1772 P 1.17 1.40 0.0461 0.0551 T 2.30 2.72 0.0906 0.1071 TO-263AB (D2Pak) dimensions [mm] symbol A min max min max 9.80 10.20 0.3858 0.4016 B 0.70 1.30 0.0276 0.0512 1.00 1.60 0.0394 0.0630 D 1.03 1.07 0.0406 0.0421 F G 2.54 typ. 0.65 0.85 5.08 typ. 0.1 typ. 0.0256 0.0335 0.2 typ. H 4.30 4.50 0.1693 0.1772 K 1.17 1.37 0.0461 0.0539 L 9.05 9.45 0.3563 0.3720 M 2.30 2.50 0.0906 0.0984 N 15 typ. 0.5906 typ. P 0.00 0.20 0.0000 0.0079 Q 4.20 5.20 0.1654 0.2047 R 12 [inch] C E Power Semiconductors 0.1 typ. N 8 max 8 max S 2.40 3.00 0.0945 0.1181 T 0.40 0.60 0.0157 0.0236 U 10.80 0.4252 V 1.15 0.0453 W 6.23 0.2453 X 4.60 0.1811 Y 9.40 0.3701 Z 16.15 0.6358 Rev. 2, Mar-04 IKP03N120H2, IKW03N120H2 IKB03N120H2 TO-247AC dimensions [mm] symbol symbol min A min 4.78 A 4.78 B 2.29 B 2.29 B C 1.78 C 1.78 C D 1.09 D 1.09 E 1.73 F 2.67 F 2.67 F G 0.76 max G 0.76 max G H 20.80 H 20.80 H K 15.65 K 15.65 K L 5.21 L 5.21 L M 19.81 M 19.81 M N 3.560 N 3.560 N P 3.61 P 3.61 P Q 6.12 Q 6.12 Q symbol [mm] min 13 D E dimensi ons Power Semiconductors A dimensi ons symbol [mm] symbol min Rev. 2, Mar-04 IKP03N120H2, IKW03N120H2 IKB03N120H2 i,v tr r =tS +tF diF /dt Qr r =QS +QF tr r IF tS QS Ir r m tF QF 10% Ir r m dir r /dt 90% Ir r m t VR Figure C. Definition of diodes switching characteristics 1 2 r1 n r2 rn Tj (t) p(t) r2 r1 rn Figure A. Definition of switching times TC Figure D. Thermal equivalent circuit 1/2 L oo DUT (Diode) L C Cr VDC RG DUT (IGBT) 1/2 L Figure E. Dynamic test circuit Leakage inductance L = 180nH, Stray capacitor C = 40pF, Relief capacitor Cr = 4nF (only for ZVT switching) Figure B. Definition of switching losses Power Semiconductors 14 Rev. 2, Mar-04 IKP03N120H2, IKW03N120H2 IKB03N120H2 Published by Infineon Technologies AG i Gr., Bereich Kommunikation St.-Martin-Strasse 53, D-81541 Munchen (c) Infineon Technologies AG 1999 All Rights Reserved. Attention please! The information herein is given to describe certain components and shall not be considered as warranted characteristics. Terms of delivery and rights to technical change reserved. We hereby disclaim any and all warranties, including but not limited to warranties of non-infringement, regarding circuits, descriptions and charts stated herein. Infineon Technologies is an approved CECC manufacturer. Information For further information on technology, delivery terms and conditions and prices please contact your nearest Infineon Technologies Office in Germany or our Infineon Technologies Representatives worldwide (see address list). Warnings Due to technical requirements components may contain dangerous substances. For information on the types in question please contact your nearest Infineon Technologies Office. Infineon Technologies Components may only be used in life-support devices or systems with the express written approval of Infineon Technologies, if a failure of such components can reasonably be expected to cause the failure of that life-support device or system, or to affect the safety or effectiveness of that device or system. Life support devices or systems are intended to be implanted in the human body, or to support and/or maintain and sustain and/or protect human life. If they fail, it is reasonable to assume that the health of the user or other persons may be endangered. Power Semiconductors 15 Rev. 2, Mar-04