Noise Suppression Products/EMI Suppression Filters > EMIFILr (Capacitor type) > Single Circuit Type for Large Current Data Sheet 1 EMIFILr (Capacitor type) Single Circuit Type for Large Current NFM18PS Series (0603 Size) c Insertion Loss Characteristics (Main Items) 0.15+0.2 -0.1 c Dimensions (50 - 50) 0 20 0.15+0.2 -0.1 (1) 0.2 min. NFM18PS474R0J3 Insertion Loss (dB) 0.80.1 (2) (3) (2) 0.60.1 1.60.1 0.8+0.2 -0.1 NFM18PS105R0J3 40 60 80 0.40.1 100 0.1 : Electrode 1 (in mm) c Equivalent Circuit 10 100 Frequency (MHz) 1000 6000 c Packaging Input (Output) (1) Code Packaging Minimum Quantity D 180mm Paper Tape 4000 B Bulk(Bag) 500 Output (Input) (3) No polarity. GND (2) c Rated Value (p: packaging code) Capacitance Rated Current Rated Voltage Insulation Resistance (min.) Operating Temperature Range NFM18PS474R0J3p 0.47F 20% 2A 6.3Vdc 1000M ohm -55 to +125C NFM18PS105R0J3p 1.0F 20% 2A 6.3Vdc 500M ohm -55 to +105C Part Number Number of Circuit: 1 c !Caution/Notice !Caution (Rating) Do not use products beyond the rated current and rated voltage as this may create excessive heat and deteriorate the insulation resistance. Notice Solderability of Tin plating termination chip might be deteriorated when low temperature soldering profile where peak solder temperature is below the Tin melting point is used. Please confirm the solderability of Tin plating termination chip before use. oThis data sheet is applied for CHIP EMIFILr used for General Electronics equipment for your design. !Note: 1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it's specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering. 2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 2012.9.6 http://www.murata.com/ Noise Suppression Products/EMI Suppression Filters > EMIFILr (Capacitor type) > Single Circuit Type for Large Current Data Sheet 1 EMIFILr (Capacitor type) Single Circuit Type for Large Current NFM18PC Series (0603 Size) c Dimensions c Dimensions NFM18PC (0.1 to 0.47F, 2.2F - 6.3V) 0.250.1 0.40.1 NFM18PC (1F, 2.2F - 10V) 0.2 min. 0.2 min. 0.80.1 (1) 0.80.1 0.60.1 (2) (3) (2) 0.250.1 0.2 min. 1.60.1 0.250.1 0.80.1 0.40.1 1.60.1 (1) (3) 0.80.1 (2) : Electrode : Electrode (2) 0.20.1 (in mm) (in mm) c Insertion Loss Characteristics (Main Items) c Equivalent Circuit (50 - 50) 0 NFM18PC104R1C3 20 NFM18PC224R0J3 Insertion Loss (dB) NFM18PC474R0J3 40 Input (Output) (1) NFM18PC105R0J3 Output (Input) (3) 60 No polarity. NFM18PC225B1A3 (10V) GND (2) 80 NFM18PC225B0J3 (6.3V) 100 0.1 1 10 100 Frequency (MHz) 1000 6000 c Packaging Code Packaging Minimum Quantity D 180mm Paper Tape 4000 B Bulk(Bag) 500 c Rated Value (p: packaging code) Part Number Capacitance Rated Current Rated Voltage Insulation Resistance (min.) Operating Temperature Range NFM18PC104R1C3p 0.1F 20% 2A 16Vdc 1000M ohm -55 to +125C NFM18PC224R0J3p 0.22F 20% 2A 6.3Vdc 1000M ohm -55 to +125C NFM18PC474R0J3p 0.47F 20% 2A 6.3Vdc 1000M ohm -55 to +125C NFM18PC105R0J3p 1.0F 20% 4A 6.3Vdc 500M ohm -55 to +105C NFM18PC225B0J3p 2.2F 20% 2A 6.3Vdc 200M ohm -40 to +85C NFM18PC225B1A3p 2.2F 20% 4A 10Vdc 200M ohm -40 to +85C Number of Circuit: 1 Continued on the following page. oThis data sheet is applied for CHIP EMIFILr used for General Electronics equipment for your design. !Note: 1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it's specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering. 2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 2012.9.6 http://www.murata.com/ Noise Suppression Products/EMI Suppression Filters > EMIFILr (Capacitor type) > Single Circuit Type for Large Current Data Sheet 2 Continued from the preceding page. c !Caution/Notice !Caution (Rating) Do not use products beyond the rated current and rated voltage as this may create excessive heat and deteriorate the insulation resistance. Notice Solderability of Tin plating termination chip might be deteriorated when low temperature soldering profile where peak solder temperature is below the Tin melting point is used. Please confirm the solderability of Tin plating termination chip before use. oThis data sheet is applied for CHIP EMIFILr used for General Electronics equipment for your design. !Note: 1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it's specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering. 2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 2012.9.6 http://www.murata.com/ Noise Suppression Products/EMI Suppression Filters > EMIFILr (Inductor type) > Chip Ferrite Bead Data Sheet 1 EMIFILr (Inductor type) Chip Ferrite Bead BLM18P Series (0603 Size) c Dimensions c Equivalent Circuit 0.80.15 0.40.2 1.60.15 0.80.15 (Resistance element becomes dominant at high frequencies.) : Electrode (in mm) c Packaging Code Packaging D 180mm Paper Tape Minimum Quantity 4000 J 330mm Paper Tape 10000 B Bulk(Bag) 1000 c Rated Value (p: packaging code) Impedance (at 100MHz/20C) Impedance (at 1GHz/20C) Rated Current DC Resistance Operating Temperature Range 30ohm (Typ.) - 1000mA 0.05ohm max. -55 to +125C BLM18PG330SN1p 33ohm 25% - 3000mA 0.025ohm max. -55 to +125C BLM18PG600SN1p 60ohm (Typ.) - 500mA 0.10ohm max. -55 to +125C BLM18PG121SN1p 120ohm 25% - 2000mA 0.05ohm max. -55 to +125C BLM18PG181SN1p 180ohm 25% - 1500mA 0.09ohm max. -55 to +125C BLM18PG221SN1p 220ohm 25% - 1400mA 0.10ohm max. -55 to +125C BLM18PG331SN1p 330ohm 25% - 1200mA 0.15ohm max. -55 to +125C BLM18PG471SN1p 470ohm 25% - 1000mA 0.20ohm max. -55 to +125C Part Number BLM18PG300SN1p Number of Circuits: 1 Continued on the following page. oThis data sheet is applied for CHIP FERRITE BEAD used for General Electronics equipment for your design. !Note: 1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it's specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering. 2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 2012.1.10 http://www.murata.com/ Noise Suppression Products/EMI Suppression Filters > EMIFILr (Inductor type) > Chip Ferrite Bead Data Sheet 2 Continued from the preceding page. c Derating of Rated Current In operating temperature exceeding +85C, derating of current is necessary for BLM18PG series. Please apply the derating curve shown in chart according to the operating temperature. Rated Current (mA) Derating of Rated Current 3000 2000 1500 1400 1200 1000 500 0 0 85 125 Operating Temperature (C) c Impedance-Frequency Characteristics (Main Items) c Impedance-Frequency Characteristics BLM18PG300SN1 600 40 BLM18PG471SN1 BLM18PG331SN1 BLM18PG221SN1 BLM18PG181SN1 BLM18PG121SN1 BLM18PG600SN1 BLM18PG330SN1 BLM18PG300SN1 300 30 Impedance () Impedance () 450 Z R 20 X 10 150 0 1 10 0 1 10 100 Frequency (MHz) 1000 c Impedance-Frequency Characteristics 3000 c Impedance-Frequency Characteristics BLM18PG600SN1 50 100 40 75 Impedance () Impedance () 1000 3000 BLM18PG330SN1 Z 30 R 20 X Z R 50 25 10 0 100 Frequency (MHz) X 1 10 100 Frequency (MHz) 1000 0 3000 1 10 100 Frequency (MHz) 1000 3000 Continued on the following page. oThis data sheet is applied for CHIP FERRITE BEAD used for General Electronics equipment for your design. !Note: 1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it's specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering. 2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 2012.1.10 http://www.murata.com/ Noise Suppression Products/EMI Suppression Filters > EMIFILr (Inductor type) > Chip Ferrite Bead Data Sheet 3 Continued from the preceding page. c Impedance-Frequency Characteristics c Impedance-Frequency Characteristics BLM18PG121SN1 BLM18PG181SN1 200 300 Z Impedance () Impedance () 150 R 100 Z 200 R 100 50 X X 0 1 10 100 Frequency (MHz) 1000 0 3000 c Impedance-Frequency Characteristics 1 1000 3000 BLM18PG331SN1 450 Impedance () 300 200 Z R 100 300 Z 1 10 100 Frequency (MHz) R 150 X 0 100 Frequency (MHz) c Impedance-Frequency Characteristics BLM18PG221SN1 Impedance () 10 X 1000 0 3000 1 10 100 Frequency (MHz) 1000 3000 c Impedance-Frequency Characteristics BLM18PG471SN1 600 Impedance () 450 Z R 300 X 150 0 1 10 100 Frequency (MHz) 1000 3000 Continued on the following page. oThis data sheet is applied for CHIP FERRITE BEAD used for General Electronics equipment for your design. !Note: 1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it's specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering. 2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 2012.1.10 http://www.murata.com/ Noise Suppression Products/EMI Suppression Filters > EMIFILr (Inductor type) > Chip Ferrite Bead Data Sheet 4 Continued from the preceding page. c !Caution/Notice !Caution (Rating) Do not use products beyond the rated current as this may create excessive heat and deteriorate the insulation resistance. Notice Solderability of Tin plating termination chip might be deteriorated when low temperature soldering profile where peak solder temperature is below the Tin melting point is used. Please confirm the solderability of Tin plating termination chip before use. oThis data sheet is applied for CHIP FERRITE BEAD used for General Electronics equipment for your design. !Note: 1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it's specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering. 2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 2012.1.10 http://www.murata.com/ Noise Suppression Products/EMI Suppression Filters > EMIFILr (Inductor type) > Chip Ferrite Bead Data Sheet 1 EMIFILr (Inductor type) Chip Ferrite Bead BLM18K Series (0603 Size) c Dimensions c Equivalent Circuit 0.80.15 T 1.60.15 0.40.2 Part Number T BLM18KG_TN 0.60.15 BLM18KG_SN 0.80.15 (Resistance element becomes dominant at high frequencies.) : Electrode (in mm) c Packaging Code Packaging D 180mm Paper Tape Minimum Quantity 4000 J 330mm Paper Tape 10000 B Bulk(Bag) 1000 c Rated Value (p: packaging code) Part Number BLM18KG260TN1p Impedance (at 100MHz/20C) Impedance (at 1GHz/20C) Rated Current DC Resistance Operating Temperature Range 26ohm 25% - 6000mA 0.007ohm max. -55 to +125C BLM18KG300TN1p 30ohm 25% - 5000mA 0.010ohm max. -55 to +125C BLM18KG700TN1p 70ohm 25% - 3500mA 0.022ohm max. -55 to +125C BLM18KG101TN1p 100ohm 25% - 3000mA 0.030ohm max. -55 to +125C BLM18KG121TN1p 120ohm 25% - 3000mA 0.030ohm max. -55 to +125C BLM18KG221SN1p 220ohm 25% - 2200mA 0.050ohm max. -55 to +125C BLM18KG331SN1p 330ohm 25% - 1700mA 0.080ohm max. -55 to +125C BLM18KG471SN1p 470ohm 25% - 1500mA 0.130ohm max. -55 to +125C BLM18KG601SN1p 600ohm 25% - 1300mA 0.150ohm max. -55 to +125C Number of Circuits: 1 Continued on the following page. oThis data sheet is applied for CHIP FERRITE BEAD used for General Electronics equipment for your design. !Note: 1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it's specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering. 2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 2012.1.10 http://www.murata.com/ Noise Suppression Products/EMI Suppression Filters > EMIFILr (Inductor type) > Chip Ferrite Bead Data Sheet 2 Continued from the preceding page. c Derating of Rated Current In operating temperature exceeding +85C, derating of current is necessary for BLM18KG series. Please apply the derating curve shown in chart according to the operating temperature. Derating of Rated Current 6000 Rated Current (mA) 5000 3500 3000 2200 2000 1700 1500 1300 1000 0 0 85 125 Operating Temperature (C) c Impedance-Frequency Characteristics (Main Items) c Impedance-Frequency Characteristics BLM18KG260TN1 800 40 BLM18KG601SN1 BLM18KG471SN1 BLM18KG331SN1 BLM18KG221SN1 BLM18KG121TN1 BLM18KG101TN1 BLM18KG700TN1 BLM18KG300TN1 BLM18KG260TN1 400 30 Impedance () Impedance () 600 Z R 20 X 10 200 0 1 10 0 1 10 100 Frequency (MHz) 1000 100 Frequency (MHz) 1000 3000 3000 Continued on the following page. oThis data sheet is applied for CHIP FERRITE BEAD used for General Electronics equipment for your design. !Note: 1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it's specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering. 2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 2012.1.10 http://www.murata.com/ Noise Suppression Products/EMI Suppression Filters > EMIFILr (Inductor type) > Chip Ferrite Bead Data Sheet 3 Continued from the preceding page. c Impedance-Frequency Characteristics c Impedance-Frequency Characteristics BLM18KG300TN1 BLM18KG700TN1 40 100 Z 75 Impedance () Impedance () 30 R 20 X R 50 X 25 10 0 Z 1 10 100 Frequency (MHz) 1000 0 3000 c Impedance-Frequency Characteristics 1 100 Frequency (MHz) 1000 3000 c Impedance-Frequency Characteristics BLM18KG101TN1 BLM18KG121TN1 200 200 150 Impedance () 150 Impedance () 10 Z 100 R 50 Z R 100 X 50 X 0 1 10 100 Frequency (MHz) 1000 0 3000 c Impedance-Frequency Characteristics 1 1000 3000 BLM18KG331SN1 400 600 300 450 Impedance () Impedance () 100 Frequency (MHz) c Impedance-Frequency Characteristics BLM18KG221SN1 Z R 200 100 0 10 10 100 Frequency (MHz) R 300 150 X 1 Z X 1000 0 3000 1 10 100 Frequency (MHz) 1000 3000 Continued on the following page. oThis data sheet is applied for CHIP FERRITE BEAD used for General Electronics equipment for your design. !Note: 1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it's specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering. 2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 2012.1.10 http://www.murata.com/ Noise Suppression Products/EMI Suppression Filters > EMIFILr (Inductor type) > Chip Ferrite Bead Data Sheet 4 Continued from the preceding page. c Impedance-Frequency Characteristics c Impedance-Frequency Characteristics BLM18KG471SN1 BLM18KG601SN1 800 800 600 Z Impedance () Impedance () 600 R 400 200 Z 400 R 200 X 0 1 10 100 Frequency (MHz) X 1000 0 3000 1 10 100 Frequency (MHz) 1000 3000 c !Caution/Notice !Caution (Rating) Do not use products beyond the rated current as this may create excessive heat and deteriorate the insulation resistance. Notice Solderability of Tin plating termination chip might be deteriorated when low temperature soldering profile where peak solder temperature is below the Tin melting point is used. Please confirm the solderability of Tin plating termination chip before use. oThis data sheet is applied for CHIP FERRITE BEAD used for General Electronics equipment for your design. !Note: 1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it's specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering. 2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 2012.1.10 http://www.murata.com/ Noise Suppression Products/EMI Suppression Filters > EMIFILr (Inductor type) > Chip Ferrite Bead for GHz Noise Data Sheet 1 EMIFILr (Inductor type) Chip Ferrite Bead for GHz Noise BLM18E Series (0603 Size) c Dimensions c Equivalent Circuit 0.80.15 T 1.60.15 0.40.2 Part Number T BLM18EGpppTN1 0.50.15 BLM18EGpppSN1 0.80.15 (Resistance element becomes dominant at high frequencies.) : Electrode (in mm) c Packaging Code Packaging D 180mm Paper Tape Minimum Quantity 4000 J 330mm Paper Tape 10000 B Bulk(Bag) 1000 c Rated Value (p: packaging code) Impedance (at 100MHz/20C) Impedance (at 1GHz/20C) Rated Current DC Resistance Operating Temperature Range BLM18EG101TN1p 100ohm 25% 140ohm (Typ.) 2000mA 0.045ohm max. -55 to +125C BLM18EG121SN1p 120ohm 25% 145ohm (Typ.) 2000mA 0.04ohm max. -55 to +125C BLM18EG221SN1p 220ohm 25% 260ohm (Typ.) 2000mA 0.05ohm max. -55 to +125C BLM18EG221TN1p 220ohm 25% 300ohm (Typ.) 1000mA 0.15ohm max. -55 to +125C BLM18EG331TN1p 330ohm 25% 450ohm (Typ.) 500mA 0.21ohm max. -55 to +125C BLM18EG391TN1p 390ohm 25% 520ohm (Typ.) 500mA 0.3ohm max. -55 to +125C BLM18EG471SN1p 470ohm 25% 550ohm (Typ.) 500mA 0.21ohm max. -55 to +125C BLM18EG601SN1p 600ohm 25% 700ohm (Typ.) 500mA 0.35ohm max. -55 to +125C Part Number Number of Circuits: 1 Continued on the following page. oThis data sheet is applied for CHIP FERRITE BEAD used for General Electronics equipment for your design. !Note: 1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it's specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering. 2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 2012.1.10 http://www.murata.com/ Noise Suppression Products/EMI Suppression Filters > EMIFILr (Inductor type) > Chip Ferrite Bead for GHz Noise Data Sheet 2 Continued from the preceding page. c Derating of Rated Current In operating temperature exceeding +85C, derating of current is necessary for BLM18EG series. Please apply the derating curve shown in chart according to the operating temperature. Rated Current (mA) Derating of Rated Current 2000 1000 500 0 0 85 125 Operating Temperature (C) c Impedance-Frequency Characteristics (Main Items) c Impedance-Frequency Characteristics (Main Items) BLM18EG_TN1 Series BLM18EG_SN1 Series 1000 1000 800 800 BLM18EG391TN1 600 Impedance () Impedance () BLM18EG601SN1 BLM18EG331TN1 BLM18EG221TN1 400 BLM18EG471SN1 600 BLM18EG221SN1 BLM18EG121SN1 400 BLM18EG101TN1 200 200 0 0 1 10 100 Frequency (MHz) 1000 c Impedance-Frequency Characteristics 3000 1 10 100 Frequency (MHz) 1000 3000 c Impedance-Frequency Characteristics BLM18EG101TN1 BLM18EG121SN1 150 200 Z 125 160 Impedance () Impedance () Z 100 R 75 X 50 R 80 X 40 25 0 120 1 10 100 Frequency (MHz) 1000 0 3000 1 10 100 Frequency (MHz) 1000 3000 Continued on the following page. oThis data sheet is applied for CHIP FERRITE BEAD used for General Electronics equipment for your design. !Note: 1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it's specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering. 2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 2012.1.10 http://www.murata.com/ Noise Suppression Products/EMI Suppression Filters > EMIFILr (Inductor type) > Chip Ferrite Bead for GHz Noise Data Sheet 3 Continued from the preceding page. c Impedance-Frequency Characteristics c Impedance-Frequency Characteristics BLM18EG221SN1 BLM18EG221TN1 400 400 300 Impedance () Impedance () 300 Z R 200 X 100 0 1 10 100 Frequency (MHz) Z 200 R X 100 1000 0 3000 c Impedance-Frequency Characteristics 1 1000 750 Impedance () Impedance () 3000 Z 400 R 300 200 X 500 Z R 250 100 1 10 100 Frequency (MHz) 1000 0 3000 c Impedance-Frequency Characteristics X 1 10 100 Frequency (MHz) 1000 3000 c Impedance-Frequency Characteristics BLM18EG471SN1 BLM18EG601SN1 800 1000 800 Impedance () Z 600 Impedance () 1000 BLM18EG391TN1 500 R 400 X 200 0 100 Frequency (MHz) c Impedance-Frequency Characteristics BLM18EG331TN1 0 10 Z 600 R 400 X 200 1 10 100 Frequency (MHz) 1000 0 3000 1 10 100 Frequency (MHz) 1000 3000 Continued on the following page. oThis data sheet is applied for CHIP FERRITE BEAD used for General Electronics equipment for your design. !Note: 1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it's specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering. 2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 2012.1.10 http://www.murata.com/ Noise Suppression Products/EMI Suppression Filters > EMIFILr (Inductor type) > Chip Ferrite Bead for GHz Noise Data Sheet 4 Continued from the preceding page. c !Caution/Notice !Caution (Rating) Do not use products beyond the rated current as this may create excessive heat and deteriorate the insulation resistance. Notice Solderability of Tin plating termination chip might be deteriorated when low temperature soldering profile where peak solder temperature is below the Tin melting point is used. Please confirm the solderability of Tin plating termination chip before use. oThis data sheet is applied for CHIP FERRITE BEAD used for General Electronics equipment for your design. !Note: 1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it's specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering. 2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 2012.1.10 http://www.murata.com/