NGD8205N, NGD8205AN Ignition IGBT 20 Amp, 350 Volt, N-Channel DPAK This Logic Level Insulated Gate Bipolar Transistor (IGBT) features monolithic circuitry integrating ESD and Overvoltage clamped protection for use in inductive coil drivers applications. Primary uses include Ignition, Direct Fuel Injection, or wherever high voltage and high current switching is required. http://onsemi.com 20 A, 350 V VCE(on) = 1.3 V @ IC = 10 A, VGE . 4.5 V Features * * * * * * * * * * Ideal for Coil-on-Plug and Driver-on-Coil Applications DPAK Package Offers Smaller Footprint for Increased Board Space Gate-Emitter ESD Protection Temperature Compensated Gate-Collector Voltage Clamp Limits Stress Applied to Load Integrated ESD Diode Protection Low Threshold Voltage for Interfacing Power Loads to Logic or Microprocessor Devices Low Saturation Voltage High Pulsed Current Capability Optional Gate Resistor (RG) and Gate-Emitter Resistor (RGE) These are Pb-Free Devices C RG G RGE E 4 Applications 1 2 * Ignition Systems DPAK CASE 369C STYLE 7 MAXIMUM RATINGS (TJ = 25C unless otherwise noted) Symbol Value Unit Collector-Emitter Voltage Rating VCES 390 V Collector-Gate Voltage VCER 390 V Gate-Emitter Voltage VGE "15 V Collector Current-Continuous @ TC = 25C - Pulsed IC 20 50 ADC AAC Continuous Gate Current IG 1.0 mA Transient Gate Current (t2 ms, f100 Hz) IG 20 mA ESD (Charged-Device Model) ESD 2.0 kV ESD (Human Body Model) R = 1500 W, C = 100 pF ESD ESD (Machine Model) R = 0 W, C = 200 pF ESD 400 V PD 125 0.83 W W/C TJ, Tstg -55 to +175 C Total Power Dissipation @ TC = 25C Derate above 25C Operating & Storage Temperature Range kV 8.0 January, 2012 - Rev. 9 MARKING DIAGRAM 1 G C E Y WW NGD8205x x G YWW NGD 8205xG C = Year = Work Week = Device Code = N or A = Pb-Free Package ORDERING INFORMATION Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect device reliability. (c) Semiconductor Components Industries, LLC, 2012 3 1 Device Package Shipping NGD8205NT4G DPAK 2500 / Tape & Reel (Pb-Free) NGD8205ANT4G DPAK 2500 / Tape & Reel (Pb-Free) For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specification Brochure, BRD8011/D. Publication Order Number: NGD8205N/D NGD8205N, NGD8205AN UNCLAMPED COLLECTOR-TO-EMITTER AVALANCHE CHARACTERISTICS (-55 TJ 175C) Characteristic Symbol Single Pulse Collector-to-Emitter Avalanche Energy VCC = 50 V, VGE = 5.0 V, Pk IL = 16.7 A, RG = 1000 W, L = 1.8 mH, Starting TJ = 25C VCC = 50 V, VGE = 5.0 V, Pk IL = 14.9 A, RG = 1000 W, L = 1.8 mH, Starting TJ = 150C VCC = 50 V, VGE = 5.0 V, Pk IL = 14.1 A, RG = 1000 W, L = 1.8 mH, Starting TJ = 175C Reverse Avalanche Energy VCC = 100 V, VGE = 20 V, Pk IL = 25.8 A, L = 6.0 mH, Starting TJ = 25C EAS Value 250 200 180 EAS(R) 2000 Unit mJ mJ THERMAL CHARACTERISTICS Thermal Resistance, Junction-to-Case RqJC 1.2 C/W Thermal Resistance, Junction-to-Ambient (Note 1) RqJA 95 C/W TL 275 C Maximum Temperature for Soldering Purposes, 1/8 from case for 5 seconds (Note 2) 1. When surface mounted to an FR4 board using the minimum recommended pad size. 2. For further details, see Soldering and Mounting Techniques Reference Manual: SOLDERRM/D. ELECTRICAL CHARACTERISTICS Characteristic Symbol Test Conditions Temperature Min Typ Max Unit BVCES IC = 2.0 mA TJ = -40C to 175C 325 350 375 V IC = 10 mA TJ = -40C to 175C 340 365 390 VGE = 0 V, VCE = 15 V TJ = 25C 0.1 1.0 mA mA OFF CHARACTERISTICS Collector-Emitter Clamp Voltage Zero Gate Voltage Collector Current ICES VCE = 175 V, VGE = 0 V Reverse Collector-Emitter Clamp Voltage BVCES(R) IC = -75 mA Reverse Collector-Emitter Leakage Current ICES(R) VCE = -24 V - NGD8205 TJ = 25C 0.5 1.5 10 TJ = 175C 1.0 25 100* TJ = -40C 0.4 0.8 5.0 TJ = 25C 30 35 39 TJ = 175C 35 39 45* TJ = -40C 30 33 37 TJ = 25C 0.05 0.25 0.5 TJ = 175C 1.0 12.5 25 TJ = -40C 0.005 0.03 0.25 Gate-Emitter Leakage Current mA TJ = 25C 0.05 0.25 1.0 VCE = -24 V - NGD8205A TJ = 175C 1.0 12.5 25 0.03 0.25 BVGES IG = "5.0 mA TJ = -40C to 175C 12 12.5 14 V IGES VGE = "5.0 V TJ = -40C to 175C 200 300 350* mA TJ = -40C Gate-Emitter Clamp Voltage V Gate Resistor (Optional) RG TJ = -40C to 175C 70 Gate-Emitter Resistor RGE TJ = -40C to 175C 14.25 16 25 kW V W ON CHARACTERISTICS (Note 4) Gate Threshold Voltage VGE(th) IC = 1.0 mA, VGE = VCE Threshold Temperature Coefficient (Negative) *Maximum Value of Characteristic across Temperature Range. 3. Pulse Test: Pulse Width v 300 mS, Duty Cycle v 2%. http://onsemi.com 2 TJ = 25C 1.5 1.8 2.1 TJ = 175C 0.7 1.0 1.3 TJ = -40C 1.7 2.0 2.3* 3.8 4.6 6.0 mV/C NGD8205N, NGD8205AN ELECTRICAL CHARACTERISTICS Characteristic Symbol Test Conditions Temperature Min Typ Max Unit TJ = 25C 0.95 1.15 1.35 V TJ = 175C 0.7 0.95 1.15 TJ = -40C 1.0 1.3 1.40 TJ = 25C 0.95 1.25 1.45 TJ = 175C 0.8 1.05 1.25 TJ = -40C 1.1 1.4 1.5 TJ = 25C 0.85 1.15 1.4 TJ = 175C 0.7 0.95 1.2 TJ = -40C 1.0 1.3 1.6* TJ = 25C 1.0 1.3 1.6 TJ = 175C 0.8 1.05 1.4 TJ = -40C 1.1 1.4 1.7* TJ = 25C 1.15 1.45 1.7 TJ = 175C 1.0 1.3 1.55 TJ = -40C 1.25 1.55 1.8* 1.6 1.9 ON CHARACTERISTICS (Note 4) Collector-to-Emitter On-Voltage VCE(on) IC = 6.5 A, VGE = 3.7 V IC = 9.0 A, VGE = 3.9 V IC = 7.5 A, VGE = 4.5 V IC = 10 A, VGE = 4.5 V IC = 15 A, VGE = 4.5 V Forward Transconductance gfs TJ = 25C 1.3 IC = 20 A, VGE = 4.5 V TJ = 175C 1.2 1.5 1.8 TJ = -40C 1.4 1.75 2.0* IC = 6.0 A, VCE = 5.0 V TJ = 25C 10 18 25 Mhos 1100 1300 1500 pF 70 80 90 18 20 22 TJ = 25C 6.0 8.0 10 TJ = 175C 6.0 8.0 10 TJ = 25C 4.0 6.0 8.0 TJ = 175C 8.0 10.5 14 TJ = 25C 3.0 5.0 7.0 TJ = 175C 5.0 7.0 9.0 TJ = 25C 1.5 3.0 4.5 TJ = 175C 5.0 7.0 10 TJ = 25C 1.0 1.5 2.0 TJ = 175C 1.0 1.5 2.0 TJ = 25C 4.0 6.0 8.0 TJ = 175C 3.0 5.0 7.0 DYNAMIC CHARACTERISTICS Input Capacitance CISS Output Capacitance COSS Transfer Capacitance CRSS f = 10 kHz, VCE = 25 V TJ = 25C SWITCHING CHARACTERISTICS Turn-Off Delay Time (Resistive) Fall Time (Resistive) Turn-Off Delay Time (Inductive) td(off) tf td(off) Fall Time (Inductive) tf Turn-On Delay Time td(on) Rise Time VCC = 300 V, IC = 9.0 A RG = 1.0 kW, RL = 33 W, VGE = 5.0 V tr VCC = 300 V, IC = 9.0 A RG = 1.0 kW, L = 300 mH, VGE = 5.0 V VCC = 14 V, IC = 9.0 A RG = 1.0 kW, RL = 1.5 W, VGE = 5.0 V *Maximum Value of Characteristic across Temperature Range. 4. Pulse Test: Pulse Width v 300 mS, Duty Cycle v 2%. http://onsemi.com 3 mSec NGD8205N, NGD8205AN TYPICAL ELECTRICAL CHARACTERISTICS 400 30 TJ = 25C IA, AVALANCHE CURRENT (A) SCIS ENERGY (mJ) 350 300 250 TJ = 175C 200 150 100 VCC = 14 V VGE = 5.0 V RG = 1000 W 50 0 0 2 6 4 8 VCC = 14 V VGE = 5.0 V RG = 1000 W 25 L = 1.8 mH 20 L = 3.0 mH 15 10 L = 10 mH 5 0 -50 10 -25 INDUCTOR (mH) IC, COLLECTOR CURRENT (A) VCE, COLLECTOR TO EMITTER VOLTAGE (V) 60 IC = 25 A IC = 20 A IC = 15 A 1.25 IC = 10 A 1.0 IC = 7.5 A 0.75 0.5 0.25 VGE = 4.5 V 0.0 -50 -25 0 25 50 75 100 150 125 50 100 125 150 175 4V TJ = 175C 40 3.5 V 30 3V 20 2.5 V 10 0 175 4.5 V 5V 0 1 2 3 4 5 6 7 8 VCE, COLLECTOR TO EMITTER VOLTAGE (V) Figure 3. Collector-to-Emitter Voltage vs. Junction Temperature Figure 4. Collector Current vs. Collector-to-Emitter Voltage 60 60 VGE = 10 V 50 4.5 V 4V IC, COLLECTOR CURRENT (A) IC, COLLECTOR CURRENT (A) 75 VGE = 10 V TJ, JUNCTION TEMPERATURE (C) 5V 40 TJ = 25C 3.5 V 30 20 3V 10 0 50 Figure 2. Open Secondary Avalanche Current vs. Temperature 2.0 1.5 25 TJ, JUNCTION TEMPERATURE (C) Figure 1. Self Clamped Inductive Switching 1.75 0 2.5 V 0 1 2 3 4 5 6 7 VGE = 10 V 4V 50 5V 40 TJ = -40C 3.5 V 30 20 3V 10 0 8 4.5 V 2.5 V 0 VCE, COLLECTOR TO EMITTER VOLTAGE (V) 1 2 3 4 5 6 7 VCE, COLLECTOR TO EMITTER VOLTAGE (V) Figure 5. Collector Current vs. Collector-to-Emitter Voltage Figure 6. Collector Current vs. Collector-to-Emitter Voltage http://onsemi.com 4 8 NGD8205N, NGD8205AN TYPICAL ELECTRICAL CHARACTERISTICS 100000 VCE = 5 V 40 COLLECTOR TO EMITTER LEAKAGE CURRENT (mA) IC, COLLECTOR CURRENT (A) 45 10000 35 30 25 20 TJ = 25C 15 10 TJ = 175C 5 0 0 0.5 1 1.5 TJ = -40C 2 2.5 3 3.5 4 10 VCE = 175 V 1.0 0.1 -50 -25 0 25 50 75 100 125 150 175 TJ, JUNCTION TEMPERATURE (C) Figure 7. Transfer Characteristics Figure 8. Collector-to-Emitter Leakage Current vs. Temperature 10000 2.25 Mean 1.75 Mean - 4 s 1.50 Ciss 1000 C, CAPACITANCE (pF) Mean + 4 s 2.00 1.25 1.00 0.75 0.50 Coss 100 Crss 10 1.0 0.25 0 -50 -25 0 25 50 75 100 125 150 0.1 175 5 10 15 20 VCE, COLLECTOR TO EMITTER VOLTAGE (V) Figure 9. Gate Threshold Voltage vs. Temperature Figure 10. Capacitance vs. Collector-to-Emitter Voltage 12 12 10 10 tfall 8 tdelay 6 VCC = 300 V VGE = 5.0 V RG = 1000 W IC = 9.0 A RL = 33 W 4 2 0 25 0 TJ, JUNCTION TEMPERATURE (C) SWITCHING TIME (ms) GATE THRESHOLD VOLTAGE (V) 100 VGE, GATE TO EMITTER VOLTAGE (V) 2.50 SWITCHING TIME (ms) VCE = -24 V 1000 50 75 100 125 150 8 VCC = 300 V VGE = 5.0 V RG = 1000 W IC = 9.0 A L = 300 mH 25 tdelay 6 tfall 4 2 0 25 175 50 75 100 125 150 175 TJ, JUNCTION TEMPERATURE (C) TJ, JUNCTION TEMPERATURE (C) Figure 11. Resistive Switching Fall Time vs. Temperature Figure 12. Inductive Switching Fall Time vs. Temperature http://onsemi.com 5 R(t), TRANSIENT THERMAL RESISTANCE (C/Watt) NGD8205N, NGD8205AN 100 Duty Cycle = 0.5 0.2 10 0.1 0.05 0.02 1 0.01 D CURVES APPLY FOR POWER PULSE TRAIN SHOWN READ TIME AT t1 P(pk) t1 0.1 t2 Single Pulse 0.01 0.000001 DUTY CYCLE, D = t1/t2 0.00001 0.0001 0.001 0.01 0.1 TJ(pk) - TA = P(pk) RqJA(t) For D=1: RqJC X R(t) for t 0.1 s 1 10 100 1000 t,TIME (S) RqJC(t), TRANSIENT THERMAL RESISTANCE (C/Watt) Figure 13. Minimum Pad Transient Thermal Resistance (Non-normalized Junction-to-Ambient) 10 1 Duty Cycle = 0.5 0.2 0.1 0.05 t1 0.02 0.01 0.01 0.000001 D CURVES APPLY FOR POWER PULSE TRAIN SHOWN READ TIME AT t1 P(pk) 0.1 t2 DUTY CYCLE, D = t1/t2 Single Pulse 0.00001 TJ(pk) - TA = P(pk) RqJC(t) 0.0001 0.001 0.01 0.1 t,TIME (S) Figure 14. Best Case Transient Thermal Resistance (Non-normalized Junction-to-Case Mounted on Cold Plate) http://onsemi.com 6 1 10 NGD8205N, NGD8205AN PACKAGE DIMENSIONS DPAK (SINGLE GAUGE) CASE 369C ISSUE D A E b3 c2 B Z D 1 L4 A 4 L3 b2 e 2 NOTES: 1. DIMENSIONING AND TOLERANCING PER ASME Y14.5M, 1994. 2. CONTROLLING DIMENSION: INCHES. 3. THERMAL PAD CONTOUR OPTIONAL WITHIN DIMENSIONS b3, L3 and Z. 4. DIMENSIONS D AND E DO NOT INCLUDE MOLD FLASH, PROTRUSIONS, OR BURRS. MOLD FLASH, PROTRUSIONS, OR GATE BURRS SHALL NOT EXCEED 0.006 INCHES PER SIDE. 5. DIMENSIONS D AND E ARE DETERMINED AT THE OUTERMOST EXTREMES OF THE PLASTIC BODY. 6. DATUMS A AND B ARE DETERMINED AT DATUM PLANE H. C H DETAIL A 3 c b 0.005 (0.13) M H C L2 GAUGE PLANE C L SEATING PLANE A1 L1 DETAIL A ROTATED 905 CW 2.58 0.102 5.80 0.228 INCHES MIN MAX 0.086 0.094 0.000 0.005 0.025 0.035 0.030 0.045 0.180 0.215 0.018 0.024 0.018 0.024 0.235 0.245 0.250 0.265 0.090 BSC 0.370 0.410 0.055 0.070 0.108 REF 0.020 BSC 0.035 0.050 --- 0.040 0.155 --- MILLIMETERS MIN MAX 2.18 2.38 0.00 0.13 0.63 0.89 0.76 1.14 4.57 5.46 0.46 0.61 0.46 0.61 5.97 6.22 6.35 6.73 2.29 BSC 9.40 10.41 1.40 1.78 2.74 REF 0.51 BSC 0.89 1.27 --- 1.01 3.93 --- STYLE 7: PIN 1. GATE 2. COLLECTOR 3. EMITTER 4. COLLECTOR SOLDERING FOOTPRINT* 6.20 0.244 DIM A A1 b b2 b3 c c2 D E e H L L1 L2 L3 L4 Z 3.00 0.118 1.60 0.063 6.17 0.243 SCALE 3:1 mm inches *For additional information on our Pb-Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. "Typical" parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor P.O. Box 5163, Denver, Colorado 80217 USA Phone: 303-675-2175 or 800-344-3860 Toll Free USA/Canada Fax: 303-675-2176 or 800-344-3867 Toll Free USA/Canada Email: orderlit@onsemi.com N. American Technical Support: 800-282-9855 Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: 421 33 790 2910 Japan Customer Focus Center Phone: 81-3-5817-1050 http://onsemi.com 7 ON Semiconductor Website: www.onsemi.com Order Literature: http://www.onsemi.com/orderlit For additional information, please contact your local Sales Representative NGD8205N/D Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: ON Semiconductor: NGD8205ANT4G