100W Constant Current Mode LED Driver 110 M M IP65 IP67 Features Wide input range 180 ~ 528VAC Constant Current mode output Metal housing with Classdesign Built-in active PFC function IP67 / IP65 design for indoor or outdoor installations Function options: output adjustable via potentiometer; HVGC-100 series Bauar t gepruft Sicherheit egel ma ge od o s be wac g www.tuv.com ID 2000000000 Applications LED street lighting LED high-bay lighting Parking space lighting LED fishing lamp 3 in 1 dimming (dim-to-off) ; Timer dimming Typical lifetime>50000 hours 5 years warranty Description HVGC-100 series is a 100W LED AC/DC LED drive featuring the constant current mode and high voltage output. HVGC-100 operates from 180 ~ 528VAC and offers models with different rated current, 350mA and 700mA, respectively. Thanks to the high efficiency up to 91%, with the fanless design, the entire series is able to operate for -40 ~ +90 case temperature under free air convection. The design of metal housing and IP67/IP65 ingress protection level allows this series to fit both indoor and outdoor applications. HVGC-100 is equipped with various function options, such as dimming methodologies, so as to provide the optimal design flexibility for LED lighting system. Model Encoding HVGC - 100 - 700 A Function options Rated output current(350/700mA) Rated wattage Series name Type A B IP Level IP65 IP67 AB IP65 D IP67 Function Io adjustable through built-in potentiometer. 3 in 1 dimming function (0~10Vdc, 10V PWM signal and resistance) Io adjustable through built-in potentiometer & 3 in 1 dimming function (0~10Vdc, 10V PWM signal and resistance) Timer dimming function, contact MEAN WELL for details(safety pending). Note In Stock In Stock In Stock By request File Name:HVGC-100-SPEC 2018-09-30 HVGC-100 100W Constant Current Mode LED Driver series SPECIFICATION HVGC-100-350 HVGC-100-700 RATED CURRENT 350mA 700mA RATED POWER 99.75W 99.4W MODEL CONSTANT CURRENT REGION Note.2 29 ~ 285V OUTPUT CURRENT ADJ. RANGE 15 ~ 142V Adjustable for A/AB-Type only (via built-in potentiometer) 210 ~ 350mA 420 ~ 700mA CURRENT RIPPLE Note.5 5.0% max. @rated current CURRENT TOLERANCE 5.0% SET UP TIME Note.4 500ms, 80ms /230VAC, 347VAC, 480VAC VOLTAGE RANGE Note.3 FREQUENCY RANGE 47 ~ 63Hz POWER FACTOR (Typ.) PF0.98/230VAC, PF0.98/277VAC, PF0.97/347VAC, PF0.93/480VAC @full load (Please refer to "POWER FACTOR (PF) CHARACTERISTIC" section) TOTAL HARMONIC DISTORTION THD< 20%(@ load50%/230VAC, 277VAC, 347VAC; @ load75%/480VAC) (Please refer to "TOTAL HARMONIC DISTORTION (THD)" section) INPUT EFFICIENCY (Typ.) 91% AC CURRENT (Typ.) INRUSH CURRENT (Typ.) 0.38A / 347VAC COLD START 25A(twidth=900s measured at 50% Ipeak) at 480VAC; Per NEMA 410 5 units (circuit breaker of type B) / 8 units (circuit breaker of type C) at 480VAC LEAKAGE CURRENT <0.75mA / 480VAC PROTECTION OVER VOLTAGE Constant current limiting, recovers automatically after fault condition is removed 300 ~ 320V 150 ~ 160V Shut down o/p voltage with auto-recovery or re-power on to recovery OVER TEMPERATURE Shut down o/p voltage, recovers automatically after temperature goes down WORKING TEMP. MAX. CASE TEMP. Tcase=-40 ~ +90(Please refer to "OUTPUT LOAD vs TEMPERATURE" section) WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT Tcase=+90 20 ~ 95% RH non-condensing -40 ~ +80, 10 ~ 95% RH 0.03%/ (0 ~ 60) VIBRATION 10 ~ 500Hz, 5G 12min./1cycle, period for 72min. each along X, Y, Z axes SAFETY STANDARDS UL8750, CSA C22.2 No. 250.0-08, TUV EN61347-1, EN61347-2-13, EAC TP TC 004, IP65 or IP67 approved; design refer to UL60950-1, TUV EN60950-1 SAFETY & WITHSTAND VOLTAGE EMC ISOLATION RESISTANCE I/P-O/P:3.75KVAC I/P-FG:2KVAC O/P-FG:1.5KVAC EMC EMISSION I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25/ 70% RH Compliance to EN55015, EN61000-3-2 Class C (@ load50%) ; EN61000-3-3, FCC Part 15 Subpart, EAC TP TC 020 EMC IMMUNITY MTBF Compliance to EN61000-4-2,3,4,5,6,8,11, EN61547, light industry level (surge immunity Line-Earth 4KV, Line-Line 2KV), EAC TP TC 020 186.1K hrs min. MIL-HDBK-217F (25) DIMENSION 236*68*38.8mm (L*W*H) 1.18Kg; 12pcs/15.2Kg/0.74CUFT PACKING NOTE 91% 0.28A / 480VAC MAX. No. of PSUs on 16A CIRCUIT BREAKER SHORT CIRCUIT OTHERS 180 ~ 528VAC 254VDC ~ 747VDC (Please refer to "STATIC CHARACTERISTIC" section) 1. All parameters NOT specially mentioned are measured at 347VAC input, rated current and 25 of ambient temperature. 2. Please refer to "DRIVING METHODS OF LED MODULE". 3. De-rating may be needed under low input voltages. Please refer to STATIC CHARACTERISTIC sections for details. 4. Length of set up time is measured at first cold start. Turning ON/OFF the driver may lead to increase of the set up time. 5. It is measured 50% ~ 100% of maximum voltage under rated power delivery. 6. The driver is considered as a component that will be operated in combination with final equipment. Since EMC performance will be affected by the complete installation, the final equipment manufacturers must re-qualify EMC Directive on the complete installation again. 7. To fulfill requirements of the latest ErP regulation for lighting fixtures, this LED driver can only be used behind a switch without permanently connected to the mains. 8. This series meets the typical life expectancy of >50,000 hours of operation when Tcase, particularly tc point (or TMP, per DLC), is about 80 or less. 9. Please refer to the warranty statement on MEAN WELL's website at http://www.meanwell.com. 10. The ambient temperature derating of 3.5/1000m with fanless models and of 5/1000m with fan models for operating altitude higher than 2000m(6500ft). 11. For any application note and IP water proof function installation caution, please refer our user manual before using. https://www.meanwell.com/Upload/PDF/LED_EN.pdf File Name:HVGC-100-SPEC 2018-09-30 100W Constant Current Mode LED Driver HVGC-100 series Block Diagram fosc : 80KHz I/P EMI FILTER & RECTIFIERS POWER SWITCHING PFC CIRCUIT RECTIFIERS & FILTER O.L.P. FG O.L.P. PFC CONTROL PWM & PFC CONTROL +V -V DIM+ DIM(B Type) DETECTION CIRCUIT O.V.P. O.T.P. DRIVING METHODS OF LED MODULE This series works in constant current mode to directly drive the LEDs. In the constant current region, the highest voltage at the output of the driver depends on the configuration of the end systems. 100 Vo(%) Should there be any compatibility issues, please contact MEAN WELL. Constant Current region 50 100 Io (%) Typical output current normalized by rated current (%) File Name:HVGC-100-SPEC 2018-09-30 HVGC-100 100W Constant Current Mode LED Driver series DIMMING OPERATION FG (Green/Yellow) AC/L(Brown) AC/N(Blue) DIM+(Blue) DIM-(White) HVGC-100 -V(Black) +V(Red) 3 in 1 dimming function (for B/AB-Type) Output constant current level can be adjusted by applying one of the three methodologies between DIM+ and DIM-: 0 ~ 10VDC, or 10V PWM signal or resistance. Direct connecting to LEDs is suggested. It is not suitable to be used with additional drivers. Dimming source current from power supply: 1 0 0A (typ.) Applying additive 0 ~ 10VDC 100% 90% -V + + - - DIM+ + Output current (%) 80% +V 70% 60% 50% 40% 30% Additive Voltage - 20% DIM- 10% "DO NOT connect "DIM- to -V" 0% 0V 1V 2V 3V 4V 5V 6V 7V 8V 9V 10V Dimming input: Additive voltage Applying additive 10V PWM signal (frequency range 100Hz ~ 3KHz): 100% 90% -V + + - - DIM+ Output current (%) 80% +V 70% 60% 50% 40% 30% Additive PWM signal 20% DIM- 10% "DO NOT connect "DIM- to -V" 0% Applying additive resistance: 100% 0% 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% Duty cycle of additive 10V PWM signal dimming input 90% -V + 80% + - - DIM+ Additive Resistance Output current (%) +V 70% 60% 50% 40% 30% DIM"DO NOT connect "DIM- to -V" 20% 10% 0% Short 10K/N 20K/N 30K/N 40K/N 50K/N 60K/N 70K/N 80K/N 90K/N 100K/N (N=driver quantity for synchronized dimming operation ) Dimming input: Additive resistance Note : 1. Min. dimming level is about 8% and the output current is not defined when 0%< I out<8%. 2. The output current could drop down to 0% when dimming input is about 0k or 0Vdc, or 10V PWM signal with 0% duty cycle. File Name:HVGC-100-SPEC 2018-09-30 HVGC-100 100W Constant Current Mode LED Driver series 100 100 80 80 LOAD (%) LOAD (%) OUTPUT LOAD vs TEMPERATURE(Note.9) 60 40 20 60 40 20 -40 -25 -10 0 15 30 50 60 70 (HORIZONTAL) -40 -25 0 20 45 AMBIENT TEMPERATURE,Ta () 55 65 90 (HORIZONTAL) 75 Tcase () STATIC CHARACTERISTIC POWER FACTOR (PF) CHARACTERISTIC Tcase at 80 0 .9 8 90 0 .9 6 80 0 .9 2 480V 70 0 .9 0 347V 0 .8 8 277V 60 0 .8 6 230V 50 0 .8 4 40 0 .8 0 0 .9 4 PF LOAD (%) 1 .0 0 100 0 .8 2 50% 180 200 347 440 480 60% 70% 528 80% 90% 100% (100W) LOAD INPUT VOLTAGE (V) 60Hz De-rating is needed under low input voltage. TOTAL HARMONIC DISTORTION (THD) EFFICIENCY vs LOAD HVGC-100 series possess superior working efficiency that up to 91% can be reached in field applications. 700mA Model, Tcase at 80 700mA Model, Tcase at 80 20.00 0.94 18.00 0.90 16.00 THD(%) 12.00 347VAC 10.00 480VAC 8.00 277VAC 6.00 230VAC 4.00 EFFICIENCY(%) 0.86 14.00 0.82 0.58 80% LOAD 90% 100% 230V 0.66 0.00 70% 277V 0.70 0.62 60% 347V 0.74 2.00 50% 480V 0.78 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% LOAD File Name:HVGC-100-SPEC 2018-09-30 HVGC-100 100W Constant Current Mode LED Driver series LIFE TIME 120 100 LIFETIME(Kh) 80 60 40 20 0 20 30 40 50 60 70 80 90 Tcase ( ) File Name:HVGC-100-SPEC 2018-09-30 HVGC-100 100W Constant Current Mode LED Driver MECHANICAL SPECIFICATION Case No. 994 series Unit:mm A-Type 236 212 12 34.2 30020 T case tc Io ADJ. 30020 104.4 STW 18AWGx3C SJTW 18AWGx2C 34 9.4 FG (Green/Yellow) AC/L(Brown) AC/N(Blue) 68 9.4 9.6 -V(Black) +V(Red) 4.2x4PL : Max. Case Temperature 38.8 tc B-Type 236 212 12 9.6 tc UL2517 18AWGx2C 104.4 34 SJTW 18AWGx2C 4.2x4PL DIM+(Blue) DIM-(White) -V(Black) +V(Red) : Max. Case Temperature 38.8 34.2 68 9.4 30020 T case tc STW 18AWGx3C 9.4 FG (Green/Yellow) AC/L(Brown) AC/N(Blue) 30020 File Name:HVGC-100-SPEC 2018-09-30 HVGC-100 100W Constant Current Mode LED Driver series AB-Type 236 212 12 34.2 T case tc Io ADJ. SJTW 18AWGx2C 34 4.2x4PL DIM+(Blue) DIM-(White) -V(Black) +V(Red) : Max. Case Temperature 38.8 tc 30020 UL2517 18AWGx2C 104.4 STW 18AWGx3C 9.4 FG (Green/Yellow) AC/L(Brown) AC/N(Blue) 30020 68 9.4 9.6 D-Type 236 212 12 34.2 T case tc 34 STW 18AWGx3C 30020 104.4 SJTW 18AWGx2C -V(Black) +V(Red) 4.2x4PL tc : Max. Case Temperature 38.8 30020 9.4 FG (Green/Yellow) AC/L(Brown) AC/N(Blue) 68 9.4 9.6 File Name:HVGC-100-SPEC 2018-09-30 HVGC-100 100W Constant Current Mode LED Driver series WATERPROOF CONNECTION Waterproof connector Waterproof connector can be assembled on the output cable of HVGC-100 to operate in dry/wet/damp or outdoor environment. AC source HVGC-100 I/P Size O/P Size Pin Configuration (Female) M12 Order No. Suitable Current 4-PIN 5A/PIN M12-04 10A max. Pin Configuration (Female) M15 5-PIN 5A/PIN M12-05 10A max. 2-PIN 12A/PIN M15-02 12A max. Order No. Suitable Current LED Lamp Cable Joiner CJ04-1 suitable for 14AWG~16AWG CJ04-2 suitable for 18AWG~22AWG 20 25 66 26 Up to four wires can be connected through this cable joiner by soldering or clamping by tools. LED Lamp HVGC-100 O/P Wires CJ04 cable joiner can be purchased independently for user's own assembly. MEAN WELL order No. : CJ04-1, CJ04-2. Junction Box Option 212 10 76 374 8.5 STW 18AWGx3C -V(Black) +V(Red) 32 68 FG (Green/Yellow) AC/L(Brown) AC/N(Blue) 61 8.5 6 5 SVT 18AWGx2C 2-5 3- PF 1/2" 3- PF 1/2" 15020 35 38.8 15020 Junction box option is available for A - Type . Please contact MEAW WELL for details. 86 INSTALLATION MANUAL Please refer to : http://www.meanwell.com/manual.html File Name:HVGC-100-SPEC 2018-09-30