January 2015
DocID027225 Rev 1
1/5
For further information contact your local STMicroelectronics sales
office
www.st.com
SAMPLEKITM0-7
M0-7 Sample kit box
Data brief
Features
Channels
RDS(on)
Package
Single
4 mΩ
7 mΩ
Octapak
Single
10 mΩ
PowerSSO-16
Single
40 mΩ
SO-8
Double
12 mΩ
PowerSSO-36
Double
20 mΩ
PowerSSO-16
Quad (alternatively)
50 mΩ
PowerSSO-16
Immediate evaluation of M0-7 devices with
demonstration examples
The kit includes:
10 samples
Printed card providing overview of
product portfolio, key features, main
applications, package description.
Description
The SAMPLEKITM0-7 provides a selection of
M0-7 samples representative of the entire family
useful for evaluating and promoting M0-7
VIPower product family.
Table 1: Device summary
Order code
Reference
SAMPLEKITM0-7
M0-7 Sample kit box
SAMPLEKITM0-7
Overview
DocID027225 Rev 1
3/5
1 Overview
MO-7 high-side drivers are manufactured using ST proprietary VIPower® technology and
housed in PowerSSO-16, Octapak and PowerSSO-36 packages. They are intended to
drive 12 V automotive grounded loads through a 3 V and 5 V CMOS-compatible interface,
and to provide protection and diagnostics. The family integrates advanced protective
functions such as load current limitation, overload active management by power limitation
and overtemperature shutdown with configurable latch-off. A FaultRST pin unlatches the
output in case of fault or disables the latch-off functionality. A dedicated multifunction
multiplexed analog output pin delivers sophisticated diagnostic functions such as high
precision proportional load current sense, supply voltage feedback and chip temperature
sense, in addition to the detection of overload and short circuit to ground, short to VCC and
OFF-state open-load. A sense enable pin allows OFF-state diagnosis to be disabled during
the module low-power mode as well as external sense resistor sharing among similar
devices.
Revision history
SAMPLEKITM0-7
4/5
DocID027225 Rev 1
2 Revision history
Table 2: Revision history
Date
Revision
Changes
07-Jan-2015
1
Initial release.
SAMPLEKITM0-7
DocID027225 Rev 1
5/5
IMPORTANT NOTICE – PLEASE READ CAREFULLY
STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, enhancements, modifications , and
improvements to ST products and/or to this document at any time without notice. Purchasers should obtain the latest relevant information on ST
products before placing orders. ST products are sold pursuant to ST’s terms and conditions of sale in place at the time of order
acknowledgement.
Purchasers are solely responsible for the choice, selection, and use of ST products and ST assumes no liability for application assistance or the
design of Purchasers’ products.
No license, express or implied, to any intellectual property right is granted by ST herein.
Resale of ST products with provisions different from the information set forth herein shall void any warranty granted by ST for such product.
ST and the ST logo are trademarks of ST. All other product or service names are the property of their respective owners.
Information in this document supersedes and replaces information previously supplied in any prior versions of this document.
© 2015 STMicroelectronics – All rights reserved
