TIL300, TIL300A PRECISION LINEAR OPTOCOUPLER SOES019A - OCTOBER 1995 - REVISED JULY 1996 D D D D D D P PACKAGE (TOP VIEW) ac or dc Signal Coupling Wide Bandwidth . . . > 200 kHz High Transfer-Gain Stability . . . 0.05%/C 3500 V Peak Isolation UL Approval Pending Applications - Power-Supply Feedback - Medical-Sensor Isolation - Opto Direct-Access Arrangement (DAA) - Isolated Process-Control Transducers LEDK LEDA PDK1 PDA1 1 8 2 7 3 6 4 5 NC NC PDK2 PDA2 NC - No internal connection description The TIL300 precision linear optocoupler consists of an infrared LED irradiating an isolated feedback photodiode and an output photodiode in a bifurcated arrangement. The feedback photodiode captures a percentage of the flux of the LED and generates a control signal that can be used to regulate the LED drive current. This technique is used to compensate for the nonlinear time and temperature characteristics of the LED. The output-side photodiode produces an output signal that is linearly proportional to the servo-optical flux emitted from the LED. A typical application circuit (shown in Figure 1) uses an operational amplifier as the input to drive the LED. The feedback photodiode sources current through R1, which is connected to the inverting input of the input operational amplifier. The photocurrent IP1 assumes a magnitude that satisfies the relationship IP1 = VI/R1. The magnitude of the current is directly proportional to the LED current through the feedback transfer gain K1(VI/R1 = K1 x IF). The operational amplifier supplies LED current to produce sufficient photocurrent to keep the node voltage Vb equal to node voltage Va. TIL300 1 1VCC+ Va Vb + VI - P R3 + _ 2 IF 1VCC+ 1VCC- 3 6 4 5 2VCC+ 2VCC+ - R1 P K2 K1 IP2 IP1 + R2 VO = K3(R2 / R1) VI 2VCC- NOTES: A. K1 is servo current gain, the ratio of the feedback photodiode current (IP1) to the input LED current (IF), i.e. K1 = IP1/IF. B. K2 is forward gain, the ratio of the output photodiode current (IP2) to the input LED current (IF), i.e. K2 = IP2/IF. C. K3 is transfer gain, the ratio of the forward gain to the servo gain, i.e. K3 = K2/K1. Figure 1. Typical Application Circuit Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. Copyright 1996, Texas Instruments Incorporated PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters. POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 1 TIL300, TIL300A PRECISION LINEAR OPTOCOUPLER SOES019A - OCTOBER 1995 - REVISED JULY 1996 Terminal Functions TERMINAL NAME NO. I/O DESCRIPTION LEDK 1 LED cathode LEDA 2 LED anode PDK1 3 Photodiode 1 cathode PDA1 4 Photodiode 1 anode PDA2 5 Photodiode 2 anode PDK2 6 Photodiode 2 cathode NC 7 No internal connection NC 8 No internal connection absolute maximum ratings over operating free-air temperature range (unless otherwise noted) Emitter Continuous total power dissipation (see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 160 mW Input LED forward current, IF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60 mA Surge current with pulse width < 10 s . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 250 mA Reverse voltage, VR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 V Reverse current, IR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 A Detector Continuous power dissipation (see Note 2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50 mW Reverse voltage, VR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50 V Coupler Continuous total power dissipation (see Note 3) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 210 mW Storage temperature, Tstg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - 55C to 150C Operating temperature, TA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - 55C to 100C Input-to-output voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3535 Vpeak Lead temperature 1,6 mm (1/16 inch) from case for 10 seconds . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 260C Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. NOTES: 1. Derate linearly from 25C at a rate of 2.66 mW/C. 2. Derate linearly from 25C at a rate of 0.66 mW/C. 3. Derate linearly from 25C at a rate of 3.33 mW/C. 2 POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 TIL300, TIL300A PRECISION LINEAR OPTOCOUPLER SOES019A - OCTOBER 1995 - REVISED JULY 1996 electrical characteristics at TA = 25C Emitter PARAMETER VF CONDITIONS Forward voltage MIN IF = 10 mA Temperature coefficient of VF IR tr Reverse current tf Cj Fall time TYP MAX UNIT 1.25 1.50 V -2.2 VR = 5 V IF = 10 mA, Rise time IF = 2 mA IF = 2 mA IF = 10 mA, VF = 0, Junction capacitance mV/C 10 s 1 f = 1 MHz A 1 s 15 pF Detector PARAMETER IDK CONDITIONS Dark current VR = 15 V, IF = 10 mA Open circuit voltage IOS Cj Short circuit current limit TYP IF = 0 IF = 10 mA VF = 0, Junction capacitance MIN MAX 25 f = 1 MHz UNIT nA 0.5 V 80 A 12 pF Coupler MIN TYP MAX Servo current gain IF = 1 mA IF = 10 mA 0.3% 0.7% 1.5% 0.5% 1.25% 2% Forward current gain IF = 1 mA IF = 10 mA 0.3% 0.7% 1.5% 0.5% 1.25% 2% TIL300 IF = 1 mA IF = 10 mA 0.75 1 1.25 0.75 1 1.25 TIL300A IF = 1 mA IF = 10 mA 0.9 1 1.10 1 1.10 PARAMETER K1 K2 CONDITIONS Detector bias voltage = -15 V K3 Transfer gain Gain temperature coefficient K1/K2 K3 0.9 - 0.5 IF = 10 mA 0.005 K3# Transfer gain linearity IF = 1 to 10 mA IF = 1 to 10 mA, BW Bandwidth IF = 10 mA, IF(MODULATION) = 2 mA tr Rise time IF = 10 mA, IF(MODULATION) = 2 mA tf Fall time Viso Peak Isolation voltage UNIT %/C 0.25% 0.5% TA = 0 to 75C RL = 1 k, 200 kHz RL = 1 k, 1.75 s IF = 10 mA, IF(MODULATION) = 2 mA RL = 1 k, 1.75 s IIO = 10 A, time = 1 minute f = 60 Hz 3535 V This symbol is not currently listed within EIA or JEDEC standards for semiconductor symbology. Servo current gain (K1) is the ratio of the feedback photodiode current (IP1) to the input LED current (IF) current (IF), i.e. K1 = IP1/IF. Forward gain (K2 is the ratio of the output photodiode current (IP2) to the input LED current (IF), i.e. K2 = IP2/IF. Transfer gain (K3) is the ratio of the forward gain to the servo gain, i.e. K3 = K2/K1. # Transfer gain linearity (K3) is the percent deviation of the transfer gain K3 as a function of LED input current (IF) or the package temperature. POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 3 TIL300, TIL300A PRECISION LINEAR OPTOCOUPLER SOES019A - OCTOBER 1995 - REVISED JULY 1996 MECHANICAL DATA P (R-PDIP-T8) PLASTIC DUAL-IN-LINE PACKAGE 0.400 (10,60) 0.355 (9,02) 8 5 0.260 (6,60) 0.240 (6,10) 1 4 0.070 (1,78) MAX 0.310 (7,87) 0.290 (7,37) 0.020 (0,51) MIN 0.200 (5,08) MAX Seating Plane 0.125 (3,18) MIN 0.100 (2,54) 0.021 (0,53) 0.015 (0,38) 0- 15 0.010 (0,25) M 0.010 (0,25) NOM 4040082 / B 03/95 NOTES: A. All linear dimensions are in inches (millimeters). B. This drawing is subject to change without notice. C. Falls within JEDEC MS-001 4 POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 PACKAGE OPTION ADDENDUM www.ti.com 8-Apr-2005 PACKAGING INFORMATION Orderable Device Status (1) Package Type Package Drawing Pins Package Eco Plan (2) Qty Lead/Ball Finish MSL Peak Temp (3) TIL300 OBSOLETE PDIP N 8 TBD Call TI Call TI TIL300A OBSOLETE PDIP N 8 TBD Call TI Call TI TIL300ADCS OBSOLETE OPTO DCS 8 TBD Call TI Call TI TIL300DCS OBSOLETE OPTO DCS 8 TBD Call TI Call TI (1) The marketing status values are defined as follows: ACTIVE: Product device recommended for new designs. LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect. NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design. PREVIEW: Device has been announced but is not in production. Samples may or may not be available. OBSOLETE: TI has discontinued the production of the device. (2) Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS) or Green (RoHS & no Sb/Br) - please check http://www.ti.com/productcontent for the latest availability information and additional product content details. TBD: The Pb-Free/Green conversion plan has not been defined. Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes. Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame retardants (Br or Sb do not exceed 0.1% by weight in homogeneous material) (3) MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature. Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis. Addendum-Page 1 IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications, enhancements, improvements, and other changes to its products and services at any time and to discontinue any product or service without notice. Customers should obtain the latest relevant information before placing orders and should verify that such information is current and complete. All products are sold subject to TI's terms and conditions of sale supplied at the time of order acknowledgment. TI warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with TI's standard warranty. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where mandated by government requirements, testing of all parameters of each product is not necessarily performed. TI assumes no liability for applications assistance or customer product design. Customers are responsible for their products and applications using TI components. To minimize the risks associated with customer products and applications, customers should provide adequate design and operating safeguards. TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right, copyright, mask work right, or other TI intellectual property right relating to any combination, machine, or process in which TI products or services are used. Information published by TI regarding third-party products or services does not constitute a license from TI to use such products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from TI under the patents or other intellectual property of TI. Reproduction of information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. Reproduction of this information with alteration is an unfair and deceptive business practice. TI is not responsible or liable for such altered documentation. Resale of TI products or services with statements different from or beyond the parameters stated by TI for that product or service voids all express and any implied warranties for the associated TI product or service and is an unfair and deceptive business practice. TI is not responsible or liable for any such statements. Following are URLs where you can obtain information on other Texas Instruments products and application solutions: Products Applications Amplifiers amplifier.ti.com Audio www.ti.com/audio Data Converters dataconverter.ti.com Automotive www.ti.com/automotive DSP dsp.ti.com Broadband www.ti.com/broadband Interface interface.ti.com Digital Control www.ti.com/digitalcontrol Logic logic.ti.com Military www.ti.com/military Power Mgmt power.ti.com Optical Networking www.ti.com/opticalnetwork Microcontrollers microcontroller.ti.com Security www.ti.com/security Telephony www.ti.com/telephony Video & Imaging www.ti.com/video Wireless www.ti.com/wireless Mailing Address: Texas Instruments Post Office Box 655303 Dallas, Texas 75265 Copyright 2005, Texas Instruments Incorporated