TDC106K035WSF - CORNELL DUBILIER ELECTRONICS

Type TDC Solid Tantalum Capacitors

CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830 • www.cde.com

Specications

Highlights

♦ Tough plastic case

♦ Low DCL

♦ Low ESR and impedance

♦ Low cost

♦ Temperature stable

♦ UL94VO ammability rating

♦ Resistant to shock and vibration

Capacitance Range:

Voltage Range:

Tolerance:

Operating Temperature Range:

DC Leakage:

Capacitance Change Maximum:

Reverse Voltage (Non-continuous):

Reel Packaging:

0.10 µF to 330 µF

6 WVdc to 50 WVdc at 85 ºC

±10%, ±20%

–55 ºC to +125 ºC (with proper derating)

+25 ºC - See ratings limit

+85 ºC - 10 x ratings limit

+125 ºC - 12.5 x ratings limit

–10% @ –55 ºC

+10% @ +85 ºC

+12% @ +125 ºC

15% of rated voltage @ 25 ºC

5% of rated voltage @ 85 ºC

1% of rated voltage @ 125 ºC

As a low cost alternative to molded solid tantalum ca-

pacitors, the Type TDC, constructed in a tough, radial

dipped ame retardant plastic case, assures the user

that it is a top performer with such attributes as low

DCL, low ESR, low impedance and a great value with

low in-place cost. The Type TDC is high shock and

vibration resistant and is available in bulk or on radial

Case Quantity

Code per Reel

E 1,000

F 1,000

G 1,000

Dipped, Radial Leaded, Solid Tantalum Capacitors

Complies with the EU Directive 2002/95/EC

requirement restricting the use of Lead (Pb), Mercury

(Hg), Cadmium (Cd), Hexavalent chromium (Cr(VI)),

PolyBrominated Biphenyls (PBB) and PolyBrominated

Diphenyl Ethers (PBDE).

CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830 • www.cde.com

Type TDC Solid Tantalum Capacitors

Capacitor Outline Drawing

Ratings

* Indicates capacitance tolerance: K = ±10%, M = ±20%, (J = ±5%, Special Order)

CDE reserves the right to substitute a tighter tolerance, higher voltage capacitor within the same case size.

Dimensions - Inches (Millimeters)

Case Leads

Code D (Max.) H (Max.) S Code

E .175 (4.45) .350 (8.89) .125 (3.17) (Standard) N

.250 (6.35) (Special) W

F .250 (6.35) .500 (12.7) .125 (3.17) (Standard) N

.250 (6.35) (Special) W

G .350 (8.89) .650 (16.51) .250 (6.35) (Special) W

.250 ±.025

(6.35 ±.64

Max

.187 ±.032

(4.75 ±.81)

.187 ±.032

(4.75 ±.81)

S S

.020

(.51)

106

107

.020

(.51)

E and F Case Codes:

Lead Spacing = .125 ±.025

(3.17 ±.64)

G Case Code:

Lead Spacing = .250 ±.025

(6.34 ±.64)

Max. Max. DF Max. Max. DF

Catalog Case Lead DCL @ +25 ºC Catalog Case Lead DCL @ +25 ºC

Cap Part Number Code Spacing @ +25 ºC 120 Hz Cap Part Number Code Spacing @ +25 ºC 120 Hz

(µF) (S) (µA) (%) (µF) (S) (µA) (%)

6 WVdc; 8 Vdc Surge @ 85 ºC 10 WVdc; 13 Vdc Surge @ 85 ºC

4 WVdc; 5 Vdc Surge @ 125 ºC 7 WVdc; 9 Vdc Surge @ 125 ºC

3.3 TDC335*006NSE-F E 0.125 0.5 5 2.2 TDC225*010NSE-F E 0.125 0.5 5

3.9 TDC395*006NSE-F E 0.125 0.5 5 2.7 TDC275*010NSE-F E 0.125 0.5 5

4.7 TDC475*006NSE-F E 0.125 0.5 5 3.3 TDC335*010NSE-F E 0.125 0.5 5

5.6 TDC565*006NSE-F E 0.125 0.5 5 3.9 TDC395*010NSE-F E 0.125 0.5 5

6.8 TDC685*006NSE-F E 0.125 0.5 5 4.7 TDC475*010NSE-F E 0.125 0.5 5

8.2 TDC825*006NSE-F E 0.125 0.5 6 5.6 TDC565*010NSE-F E 0.125 0.5 5

10 TDC106*006NSE-F E 0.125 0.5 6 6.8 TDC685*010NSE-F E 0.125 0.5 5

12 TDC126*006NSE-F E 0.125 0.6 6 8.2 TDC825*010NSE-F E 0.125 0.7 6

15 TDC156*006NSF-F F 0.125 0.7 6 10 TDC106*010NSF-F F 0.125 0.8 6

18 TDC186*006NSF-F F 0.125 0.9 6 12 TDC126*010NSF-F F 0.125 1.0 6

22 TDC226*006NSF-F F 0.125 1.1 6 15 TDC156*010NSF-F F 0.125 1.2 6

27 TDC276*006NSF-F F 0.125 1.3 6 18 TDC186*010NSF-F F 0.125 1.4 6

33 TDC336*006NSF-F F 0.125 1.6 6 22 TDC226*010NSF-F F 0.125 1.8 6

39 TDC396*006NSF-F F 0.125 1.9 6 27 TDC276*010NSF-F F 0.125 2.2 6

47 TDC476*006NSF-F F 0.125 2.3 6 33 TDC336*010NSF-F F 0.125 2.6 6

56 TDC566*006NSF-F F 0.125 2.7 6 39 TDC396*010NSF-F F 0.125 3.1 6

68 TDC686*006NSF-F F 0.125 3.3 6 47 TDC476*010NSF-F F 0.125 3.8 6

82 TDC826*006NSF-F F 0.125 3.9 8 56 TDC566*010NSF-F F 0.125 4.5 6

100 TDC107*006NSF-F F 0.125 4.8 8 68 TDC686*010NSF-F F 0.125 5.4 6

120 TDC127*006WSG-F G 0.25 5.8 8 82 TDC826*010WSG-F G 0.25 6.6 8

150 TDC157*006WSG-F G 0.25 7.2 8 100 TDC107*010WSG-F G 0.25 8.0 8

180 TDC187*006WSG-F G 0.25 8.6 8 120 TDC127*010WSG-F G 0.25 9.6 8

220 TDC227*006WSG-F G 0.25 10 8 150 TDC157*010WSG-F G 0.25 10.0 8

270 TDC277*006WSG-F G 0.25 10 8 180 TDC187*010WSG-F G 0.25 10.0 8

330 TDC337*006WSG-F G 0.25 10 8 220 TDC227*010WSG-F G 0.25 10.0 8

Type TDC Solid Tantalum Capacitors

CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830 • www.cde.com

* Indicates capacitance tolerance: K = ±10%, M = ±20%, (J = ±5%, Special Order)

CDE reserves the right to substitute a tighter tolerance, higher voltage capacitor within the same case size.

Dimensions - Inches (Millimeters)

Case Leads

Code D (Max.) H (Max.) S Code

E .175 (4.45) .350 (8.89) .125 (3.17) (Standard) N

.250 (6.35) (Special) W

F .250 (6.35) .500 (12.7) .125 (3.17) (Standard) N

.250 (6.35) (Special) W

G .350 (8.89) .650 (16.51) .250 (6.35) (Special) W

Max. Max. DF Max. Max. DF

Catalog Case Lead DCL @ +25 ºC Catalog Case Lead DCL @ +25 ºC

Cap Part Number Code Spacing @ +25 ºC 120 Hz Cap Part Number Code Spacing @ +25 ºC 120 Hz

(µF) (S) (µA) (%) (µF) (S) (µA) (%)

16 WVdc; 20 Vdc Surge @ 85 ºC 20 WVdc; 26 Vdc Surge @ 85 ºC

10 WVdc; 12 Vdc Surge @ 125 ºC 13 WVdc; 16 Vdc Surge @ 125 ºC

1.5 TDC155*016NSE-F E 0.125 0.5 5 8.2 TDC825*020NSF-F F 0.125 1.3 6

1.8 TDC185*016NSE-F E 0.125 0.5 5 10 TDC106*020NSF-F F 0.125 1.6 6

2.2 TDC225*016NSE-F E 0.125 0.5 5 12 TDC126*020NSF-F F 0.125 1.9 6

2.7 TDC275*016NSE-F E 0.125 0.5 5 15 TDC156*020NSF-F F 0.125 2.4 6

3.3 TDC335*016NSE-F E 0.125 0.5 5 18 TDC186*020NSF-F F 0.125 2.9 6

3.9 TDC395*016NSE-F E 0.125 0.5 5 22 TDC226*020NSF-F F 0.125 3.5 6

4.7 TDC475*016NSE-F E 0.125 0.6 5 33 TDC336*020WSG-F G 0.25 5.3 6

5.6 TDC565*016NSE-F E 0.125 0.7 5 39 TDC396*020WSG-F G 0.25 6.2 6

6.8 TDC685*016NSE-F E 0.125 0.9 5 47 TDC476*020WSG-F G 0.25 7.5 6

8.2 TDC825*016NSE-F E 0.125 1.0 6 56 TDC566*020WSG-F G 0.25 9.0 6

10 TDC106*016NSF-F F 0.125 1.3 6 68 TDC686*020WSG-F G 0.25 10.0 6

12 TDC126*016NSF-F F 0.125 1.5 6 82 TDC826*020WSG-F G 0.25 10.0 8

15 TDC156*016NSF-F F 0.125 1.8 6 100 TDC107*020WSG-F G 0.25 10.0 8

18 TDC186*016NSF-F F 0.125 2.2 6 25 WVdc; 32 Vdc Surge @ 85 ºC

22 TDC226*016NSF-F F 0.125 2.6 6 17 WVdc; 22 Vdc Surge @ 125 ºC

27 TDC276*016NSF-F F 0.125 3.2 6 1.0 TDC105*025NSE-F E 0.125 0.50 3

33 TDC336*016NSF-F F 0.125 4.0 6 1.2 TDC125*025NSE-F E 0.125 0.50 5

39 TDC396*016WSG-F G 0.25 4.7 6 1.5 TDC155*025NSE-F E 0.125 0.50 5

47 TDC476*016WSG-F G 0.25 5.6 6 1.8 TDC185*025NSE-F E 0.125 0.50 5

56 TDC566*016WSG-F G 0.25 6.8 6 2.2 TDC225*025NSE-F E 0.125 0.50 5

68 TDC686*016WSG-F G 0.25 8.2 6 2.7 TDC275*025NSE-F E 0.125 0.50 5

82 TDC826*016WSG-F G 0.25 9.8 8 3.3 TDC335*025NSE-F E 0.125 0.70 5

100 TDC107*016WSG-F G 0.25 10.0 8 3.9 TDC395*025NSE-F E 0.125 0.80 5

120 TDC127*016WSG-F G 0.25 10.0 8 4.7 TDC475*025NSF-F F 0.125 0.90 5

150 TDC157*016WSG-F G 0.25 10.0 8 5.6 TDC565*025NSF-F F 0.125 1.10 5

20 WVdc; 26 Vdc Surge @ 85 ºC 6.8 TDC685*025NSF-F F 0.125 1.40 5

13 WVdc; 16 Vdc Surge @ 125 ºC 8.2 TDC825*025NSF-F F 0.125 1.60 6

1.0 TDC105*020NSE-F E 0.125 0.5 3 10 TDC106*025NSF--F F 0.125 2.0 6

1.2 TDC125*020NSE-F E 0.125 0.5 5 12 TDC126*025NSF-F F 0.125 2.4 6

1.5 TDC155*020NSE-F E 0.125 0.5 5 15 TDC156*025NSF-F F 0.125 3.0 6

1.8 TDC185*020NSE-F E 0.125 0.5 5 18 TDC186*025NSF-F F 0.125 3.6 6

2.2 TDC225*020NSE-F E 0.125 0.5 5 22 TDC226*025NSF-F F 0.125 4.4 6

2.7 TDC275*020NSE-F E 0.125 0.5 5 27 TDC276*025WSG-F G 0.250 5.4 6

3.3 TDC335*020NSE-F E 0.125 0.5 5 33 TDC336*025WSG-F G 0.250 6.6 6

3.9 TDC395*020NSE-F E 0.125 0.6 5 39 TDC396*025WSG-F G 0.250 7.8 6

4.7 TDC475*020NSE-F E 0.125 0.8 5 47 TDC476*025WSG-F G 0.250 9.4 6

5.6 TDC565*020NSF-F F 0.125 0.9 5 56 TDC566*025WSG-F G 0.250 10.0 6

6.8 TDC685*020NSF-F F 0.125 1.1 5 68 TDC686*025WSG-F G 0.250 10.0 6

Ratings

CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830 • www.cde.com

Type TDC Solid Tantalum Capacitors

* Indicates capacitance tolerance: K = ±10%, M = ±20%, (J = ±5%, Special Order)

CDE reserves the right to substitute a tighter tolerance, higher voltage capacitor within the same case size.

Ratings

Max. Max. DF Max. Max. DF

Catalog Case Lead DCL @ +25 ºC Catalog Case Lead DCL @ +25 ºC

Cap Part Number Code Spacing @ +25 ºC 120 Hz Cap Part Number Code Spacing @ +25 ºC 120 Hz

(µF) (S) (µA) (%) (µF) (S) (µA) (%)

35 WVdc; 46 Vdc Surge @ 85 ºC 50 WVdc; 65 Vdc Surge @ 85 ºC

23 WVdc; 28 Vdc Surge @ 125 ºC 33 WVdc; 40 Vdc Surge @ 125 ºC

0.10 TDC104*035NSE-F E 0.125 0.5 3 .10 TDC104*050NSE-F E 0.125 0.5 3

0.12 TDC124*035NSE-F E 0.125 0.5 3 .12 TDC124*050NSE-F E 0.125 0.5 3

0.15 TDC154*035NSE-F E 0.125 0.5 3 .15 TDC154*050NSE-F E 0.125 0.5 3

0.18 TDC184*035NSE-F E 0.125 0.5 3 .18 TDC184*050NSE-F E 0.125 0.5 3

0.22 TDC224*035NSE-F E 0.125 0.5 3 .22 TDC224*050NSE-F E 0.125 0.5 3

0.27 TDC274*035NSE-F E 0.125 0.5 3 .27 TDC274*050NSE-F E 0.125 0.5 3

0.33 TDC334*035NSE-F E 0.125 0.5 3 .33 TDC334*050NSE-F E 0.125 0.5 3

0.39 TDC394*035NSE-F E 0.125 0.5 3 .39 TDC394*050NSE-F E 0.125 0.5 3

0.47 TDC474*035NSE-F E 0.125 0.5 3 .47 TDC474*050NSE-F E 0.125 0.5 3

0.56 TDC564*035NSE-F E 0.125 0.5 3 .56 TDC564*050NSE-F E 0.125 0.5 3

0.68 TDC684*035NSE-F E 0.125 0.5 3 .68 TDC684*050NSE-F E 0.125 0.5 3

0.82 TDC824*035NSE-F E 0.125 0.5 3 .82 TDC824*050NSE-F E 0.125 0.5 3

1.0 TDC105*035NSE-F E 0.125 0.5 3 1.0 TDC105*050NSE-F E 0.125 0.5 3

1.2 TDC125*035NSE-F E 0.125 0.5 5 1.2 TDC125*050NSE-F E 0.125 0.5 5

1.5 TDC155*035NSE-F E 0.125 0.5 5 1.5 TDC155*050NSE-F E 0.125 0.6 5

1.8 TDC185*035NSE--F E 0.125 0.5 5 1.8 TDC185*050NSF-F F 0.125 0.7 5

2.2 TDC225*035NSE-F E 0.125 0.6 5 2.2 TDC225*050NSF-F F 0.125 0.9 5

2.7 TDC275*035NSF-F F 0.125 0.7 5 2.7 TDC275*050NSF-F F 0.125 1.1 5

3.3 TDC335*035NSF-F F 0.125 0.9 5 3.3 TDC335*050NSF-F F 0.125 1.3 5

3.9 TDC339*035NSF-F F 0.125 1.0 5 3.9 TDC395*050NSF-F F 0.125 1.6 5

4.7 TDC475*035NSF-F F 0.125 1.3 5 4.7 TDC475*050NSF-F F 0.125 1.9 5

5.6 TDC565*035NSF-F F 0.125 1.6 5 5.6 TDC565*050NSF-F F 0.125 2.2 5

6.8 TDC685*035NSF-F F 0.125 1.9 5 6.8 TDC685*050WSG-F G 0.25 2.7 5

8.2 TDC825*035NSF-F F 0.125 2.3 6 8.2 TDC825*050WSG-F G 0.25 3.3 6

10 TDC106*035NSF-F F 0.125 2.8 6 10 TDC106*050WSG-F G 0.25 4.0 6

12 TDC126*035WSG-F G 0.25 3.4 6 12 TDC126*050WSG-F G 0.25 4.8 6

15 TDC156*035WSG-F G 0.25 4.2 6 15 TDC156*050WSG-F G 0.25 6.0 6

18 TDC186*035WSG-F G 0.25 5.0 6 18 TDC186*050WSG-F G 0.25 7.2 6

22 TDC226*035WSG-F G 0.25 6.2 6 22 TDC226*050WSG-F G 0.25 8.8 6

27 TDC276*035WSG-F G 0.25 7.6 6

33 TDC336*035WSG-F G 0.25 9.2 6

39 TDC396*035WSG-F G 0.25 10 6

47 TDC476*035WSG-F G 0.25 10 6

Type TDC Solid Tantalum Capacitors

CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830 • www.cde.com

Part Numbering System

TDC 107 K 016 W S G –F

Lead Lead Case RoHS

Series Capacitance Tolerance Voltage Spacing Length Code Compliant

TDC 394 = 0.39 µF J = ±5% 006 = 6 Vdc N = .125 S = .187 E –F = Compliant

105 = 1.0 µF K = ±10% 010 = 10 Vdc W = .250 T = Tape

& Reel

F Blank = Not

225 = 2.2 µF M = ±20% 016 = 16 Vdc GCompliant

186 = 18 µF 020 = 20 Vdc

107 = 100 µF 025 = 25 Vdc

035 = 35 Vdc

050 = 50 Vdc

Notice and Disclaimer: All product drawings, descriptions, specications, statements, information and data

(collectively, the “Information”) in this datasheet or other publication are subject to change. The customer

is responsible for checking, conrming and verifying the extent to which the Information contained in this

datasheet or other publication is applicable to an order at the time the order is placed. All Information given

herein is believed to be accurate and reliable, but it is presented without any guarantee, warranty, representation

or responsibility of any kind, expressed or implied. Statements of suitability for certain applications are based

on the knowledge that the Cornell Dubilier company providing such statements (“Cornell Dubilier”) has

of operating conditions that such Cornell Dubilier company regards as typical for such applications, but

are not intended to constitute any guarantee, warranty or representation regarding any such matter – and

Cornell Dubilier specically and expressly disclaims any guarantee, warranty or representation concerning

the suitability for a specic customer application, use, storage, transportation, or operating environment.

The Information is intended for use only by customers who have the requisite experience and capability to

determine the correct products for their application. Any technical advice inferred from this Information or

otherwise provided by Cornell Dubilier with reference to the use of any Cornell Dubilier products is given

gratis (unless otherwise specied by Cornell Dubilier), and Cornell Dubilier assumes no obligation or liability

for the advice given or results obtained. Although Cornell Dubilier strives to apply the most stringent quality

and safety standards regarding the design and manufacturing of its products, in light of the current state

of the art, isolated component failures may still occur. Accordingly, customer applications which require a

high degree of reliability or safety should employ suitable designs or other safeguards (such as installation

of protective circuitry or redundancies or other appropriate protective measures) in order to ensure that the

failure of an electrical component does not result in a risk of personal injury or property damage. Although

all product-related warnings, cautions and notes must be observed, the customer should not assume that all

safety measures are indicated in such warnings, cautions and notes, or that other safety measures may not be

required.