SA36A - EIC Semiconductor - searchdatasheet.com

SA5.0 - SA170A

TRANSIENT VOLTAGE

SUPPRESSOR

Stand-off Zener Voltage Range 5.0 - 170 Volts

: 500 Watts

FEATURES :

* 500W surge capability at 1ms

* Excellent clamping capability

* Low zener impedance

* Fast response time : typically less

then 1.0 ps from 0 volt to VBR(min.)

* Typical I

less then 1

A above 10V

MECHANICAL DATA

* Case : DO-41 Molded plastic

* Epoxy : UL94V-O rate flame retardant

* Lead : Axial lead solderable per MIL-STD-202,

method 208 guaranteed

* Polarity : Color band denotes cathode end except Bipolar.

* Mounting position : Any

* Weight : 0.339 gram

DEVICES FOR BIPOLAR APPLICATIONS

For bi-directional use C or CA Suffix

Electrical characteristics apply in both directions

MAXIMUM RATINGS

Rating at 25 °C ambient temperature unless otherwise specified.

Rating Symbol Value Unit

Peak Power Dissipation at Ta = 25 °C, Tp=1ms (Note1) PPK Minimum 500 W

Steady State Power Dissipation at TL = 75 °C

Lead Lengths 0.375", (9.5mm) (Note 2) PD3.0 W

Peak Forward Surge Current, 8.3ms Single Half

Sine-Wave Superimposed on Rated Load

(JEDEC Method) (Note 3) IFSM 70 A

Operating and Storage Temperature Range TJ, TSTG - 65 to + 175 °C

Notes :

(1) Non-repetitive Current pulse, per Fig. 5 and derated above Ta = 25

C per Fig. 1

(2) Mounted on Copper Leaf area of 1.57 in2 (40mm2).

(3) 8.3 ms single half sine-wave, duty cycle = 4 pulses per minutes maximum.

Page 1 of 4 Rev. 03 : March 25, 2005

DO - 41

Dimensions in inches and (millimeters)

0.205 (5.20)

0.160 (4.10)

1.00 (25.4)

MIN.

0.107 (2.74)

0.080 (2.03)

0.034 (0.86)

0.028 (0.71)

1.00 (25.4)

MIN.

* Pb / RoHS Free

ELECTRICAL CHARACTERISTICS

(Rating at 25°C ambient temperature unless otherwise specified)

Breakdown Voltage @ ItWorking PeakMaximumMaximumMaximumMaximum

( Note 1 )ReverseReverse LeakageReverseClampingVoltage

TYPE

Voltage @ VRWM CurrentVoltage @ IRSM Temperature

VBR (V)ItVRWM IRIRSM VRSM Variation of VBR

Min.Max.(mA)(V) (µA) (A)(V) (mV /

SA5.0 6.407.3105.060052.09.65.0

(4) 6.407.0105.060054.39.25.0

SA6.0 6.678.15106.060043.911.45.0

SA6.0A 6.677.37106.060048.510.35.0

SA6.5 7.228.82106.540040.712.35.0

SA6.5A 7.227.98106.540044.711.25.0

SA7.0 7.789.51107.015037.813.36.0

SA7.0A 7.788.60107.015041.712.06.0

SA7.5 8.3310.21.07.55035.014.37.0

SA7.5A 8.339.211.07.55038.812.97.0

SA8.0 8.8910.91.08.02533.315.07.0

SA8.0A 8.899.831.08.02536.713.67.0

SA8.5 9.4411.51.08.55.031.415.98.0

SA8.5A 9.4410.41.08.55.034.714.48.0

SA9.0 10.012.21.09.01.029.516.99.0

SA9.0A 10.011.11.09.01.032.515.49.0

SA10 11.113.61.010.01.026.618.810.0

SA10A 11.112.31.010.01.029.417.010.0

SA11 12.214.91.011.01.024.920.111.0

SA11A 12.213.51.011.01.027.418.211.0

SA12 13.316.31.012.01.022.722.012.0

SA12A 13.314.71.012.01.025.119.912.0

SA13 14.417.61.013.01.021.023.813.0

SA13A 14.415.91.013.01.023.221.513.0

SA14 15.619.11.014.01.019.425.814.0

SA14A 15.617.21.014.01.021.523.214.0

SA15 16.720.41.015.01.018.826.916.0

SA15A 16.718.51.015.01.020.624.416.0

SA16 17.821.81.016.01.017.628.819.0

SA16A 17.819.71.016.01.019.226.017.0

SA17 18.923.11.017.01.016.430.520.0

SA17A 18.920.91.017.01.018.127.619.0

SA18 20.024.41.018.01.015.532.221.0

SA18A 20.022.11.018.01.017.229.220.0

SA20 22.227.11.020.01.013.935.825.0

SA20A 22.224.51.020.01.015.432.423.0

SA22 24.429.81.022.01.012.739.428.0

SA22A 24.426.91.022.01.014.135.525.0

SA24 26.732.61.024.01.011.643.031.0

SA24A 26.729.51.024.01.012.838.928.0

SA26 28.935.31.026.01.010.746.631.0

SA26A 28.931.91.026.01.011.942.130.0

SA28 31.138.01.028.01.09.950.035.0

SA28A 31.134.41.028.01.011.045.431.0

SA30 33.340.71.030.01.09.353.539.0

SA30A 33.336.81.030.01.010.348.436.0

SA33 36.744.91.033.01.08.559.042.0

SA33A 36.740.61.033.01.09.453.339.0

SA36 40.048.91.036.01.07.864.346.0

SA36A 40.044.21.036.01.08.658.141.0

Page 2 of 4Rev. 02 : October 14, 2004

ELECTRICAL CHARACTERISTICS

(Rating at 25°C ambient temperature unless otherwise specified)

Breakdown Voltage @ ItWorking PeakMaximumMaximumMaximumMaximum

( Note 1 )ReverseReverse LeakageReverseClampingVoltage

TYPE

Voltage @ VRWM CurrentVoltage @ IRSM Temperature

VBR (V)ItVRWM IRIRSM VRSM Variation of VBR

Min.Max.(mA)(V) (µA) (A)(V) (mV /

SA40 44.454.31.040.01.07.071.451.0

SA40A 44.449.11.040.01.07.864.546.0

SA43 47.858.41.043.01.06.576.755.0

SA43A 47.852.81.043.01.07.269.450.0

SA45 50.061.11.045.01.06.280.358.0

SA45A 50.055.31.045.01.06.972.752.0

SA48 53.365.11.048.01.05.885.563.0

SA48A 53.358.91.048.01.06.577.456.0

SA51 56.769.31.051.01.05.591.166.0

SA51A 56.762.71.051.01.06.182.461.0

SA54 60.073.31.054.01.05.296.371.0

SA54A 60.066.31.054.01.05.787.165.0

SA58 64.478.71.058.01.04.910378.0

SA58A 64.471.21.058.01.05.393.670.0

SA60 66.781.51.060.01.04.710780.0

SA60A 66.773.71.060.01.05.296.871.0

SA64 71.186.91.064.01.04.411486.0

SA64A 71.178.61.064.01.04.910376.0

SA70 77.895.11.070.01.04.012594.0

SA70A 77.886.01.070.01.04.411385.0

SA75 83.31021.075.01.03.7134101

SA75A 83.392.11.075.01.04.112191.0

SA78 86.71061.078.01.03.6139105

SA78A 86.795.81.078.01.04.012695.0

SA85 94.41151.085.01.03.3151114

SA85A 94.41041.085.01.03.6137103

SA90 1001221.090.01.03.1160121

SA90A 1001111.090.01.03.4146110

SA100 1111361.01001.02.8179135

SA100A 1111231.01001.03.1162123

SA110 1221491.01101.02.6196148

SA110A 1221351.01101.02.8177133

SA120 1331631.01201.02.3214162

SA120A 1331471.01201.02193146

SA130 1441761.01301.02.2231175

SA130A 1441591.01301.02.4209158

SA150 1672041.01501.01.9268203

SA150A 1671851.01501.02.1243184

SA160 1782181.01601.01.7287217

SA160A 1781971.01601.01.9259196

SA170 1892311.01701.01.6304230

SA170A 1892091.01701.01.8275208

Notes:

(1) VBR measured after It applied for 300 µs., It = square wave pulse or equivalent.

(2) VF = 3.5 Vmax., IF = 35 Amps. ( 6.8 Volts thru 91 Volts )

VF = 5.0 Vmax., IF = 35 Amps. ( 150 Volts thru 200 Volts ) per 1/2 square or equivalent sine wave.

PW = 8.3 ms, duty cycle = 4 pulses per minute maximum.

(3) For bidirectional types with VWM of 10 Volts and less, the IR limit is doubled

(4) For the bidirectional SA5.0CA, the maximum VBR is 7.25V

Page 3 of 4Rev. 03 : March 25, 2005

RATING AND CHARACTERISTIC CURVES ( SA5.0 - SA170A )

FIG.1 - PULSE DERATING CURVE FIG.2 - MAXIMUM NON-REPETITIVE

SURGE CURRENT

025 50 75 100 125 150 175

Ta, AMBIENT TEMPERATURE, ( °C) NUMBER OF CYCLES AT 60Hz

FIG.3 - STEADY STATE POWER DERATING FIG.4 - PULSE RATING CURVE

FIG.5 - PULSE WAVEFORM

0 1.0 2.0 3.0 4.0

Page 4 of 4 Rev. 03 : March 25, 2005

120

4.0

100

120

1.0

3.0

0.1

2.0

1.0

tp, PULSE WIDTH

PEAK FORWARD SURGE

CURRENT, AMPERES

PEAK PULSE DERATING IN % OF

PEAK POWER OR CURRENT

Pp,PEAK POWER (kW)

100 100

100

125

175

150

0.1µs1.0µs10µs100µs10ms

1.0ms

200

TL, LEAD TEMPERATURE (°C)

8.3 ms SINGLE HALF SINE WAVE

JEDEC METHOD

PD, STEADY STATE POWER DISSIPATION

(WATTS)

100

Tr = 10µs

Peak Value

IRMS

Half Value - IRMS

TJ=25 °C

Pulse Width (tp) is defined

as that point where the peak

current decays to 50%

of IRSM

10X1000 Waveform

as defined by R.E.A.

T, TIME(ms)

PEAK PULSE CURRENT - % IRMS

Single Phase Half Wave

60 Hz Resistive or Inductive load