TSM102,, TSM102A DUAL OPERATIONAL AMPLIFIER, DUAL COMPARATOR, AND VOLTAGE REFERENCE www.ti.com SLVS602 - MARCH 2006 FEATURES APPLICATIONS * * * * * * * OPERATIONAL AMPLIFIERS - Low Supply Current...200 A/A - Medium Speed...2.1 MHz - Low-Level Output Voltage Close to VCC-...0.1 V Typ (RL = 10 k) - Input Common-Mode Voltage Range Includes Ground COMPARATORS - Low Supply Current...200 A/A (VCC = 5 V) - Input Common-Mode Voltage Range Includes Ground - Low Output Saturation Voltage... Typically 250 mV (Isink = 4 mA) VOLTAGE REFERENCE - Adjustable Output Voltage...VREF to 36 V - Sink Current Capability...1 mA to 100 mA - 0.4% (A Grade) and 1% (Standard Grade) Precision - Latch-Up Immunity * * Switch-Mode Power Supplies Battery Chargers Voltage and Current Sensing Power-Good, Overvoltage, Undervoltage, Overcurrent Detection Window Comparators Alarms, Detectors, and Sensors D (SOIC) OR PW (TSSOP) PACKAGE (TOP VIEW) 1OUT 1 COMP COMP 1IN- 2 16 4OUT 15 4IN- - + + - 1IN+ 3 14 4IN+ VCC+ 4 13 VCC- 12 3IN+ 2IN+ 5 - 2IN- 6 2OUT 7 AMP + + - AMP 11 3IN- 10 3OUT VREF 8 9 CATHODE DESCRIPTION/ORDERING INFORMATION The TSM102 and TMS102A combine the building blocks of a dual operational amplifier, a dual comparator, and a precision voltage reference, all of which often are used to implement a wide variety of power-management functions, including overcurrent detection, undervoltage/overvoltage detection, power-good detection, window comparators, error amplifiers, etc. Additional applications include alarm and detector/sensor applications. The TSM102A offers a tight VREF tolerance of 0.4% at 25C. The TSM102 and TSM102A are characterized for operation from -40C to 85C. ORDERING INFORMATION TA MAX VREF TOLERANCE (25C) PACKAGE (1) SOIC - D A grade: 0.4% precision TSSOP - PW -40C to 85C SOIC - D Standard grade: 1% precision TSSOP - PW (1) ORDERABLE PART NUMBER Tube of 75 TSM102AID Reel of 2500 TSM102AIDR Tube of 90 TSM102AIPW Reel of 2000 TSM102AIPWR Tube of 75 TSM102ID Reel of 2500 TSM102IDR Tube of 90 TSM102IPW Reel of 2000 TSM102IPWR TOP-SIDE MARKING TSM102AI SN102AI TSM102I SN102I Package drawings, standard packing quantities, thermal data, symbolization, and PCB design guidelines are available at www.ti.com/sc/package. Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of the Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters. Copyright (c) 2006, Texas Instruments Incorporated TSM102,, TSM102A DUAL OPERATIONAL AMPLIFIER, DUAL COMPARATOR, AND VOLTAGE REFERENCE www.ti.com SLVS602 - MARCH 2006 Absolute Maximum Ratings (1) over free-air temperature range (unless otherwise noted) MIN MAX UNIT VCC Supply voltage 36 V VID Input differential voltage 36 V VI Input voltage range IKA Voltage reference cathode current JA Package thermal impedance (2) (3) TJ Maximum junction temperature Tstg Storage temperature range (1) (2) (3) -0.3 D package 36 V 100 mA 73 PW package C/W 108 -65 150 C 150 C Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under Recommended Operating Conditions is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. Maximum power dissipation is a function of TJ(max), JA, and TA. The maximum allowable power dissipation at any allowable ambient temperature is PD = (TJ(max) - TA)/JA. Selecting the maximum of 150C can affect reliability. The package thermal impedance is calculated in accordance with JESD 51-7. Recommended Operating Conditions MIN MAX 3 UNIT VCC+ - VCC- Supply voltage VID Comparator differential input voltage 30 V VCC+ - VCC- VKA Cathode-to-anode voltage VREF 36 V V IK Reference cathode current 1 100 mA TA Operating free-air temperature -40 85 C Total Device Electrical Characteristics PARAMETER ICC 2 Total supply current, excluding reference cathode current TEST CONDITIONS VCC+ = 5 V, VCC- = 0 V, No load Submit Documentation Feedback TA 25C Full range MIN TYP MAX 0.8 1.5 2 UNIT mA www.ti.com TSM102,, TSM102A DUAL OPERATIONAL AMPLIFIER, DUAL COMPARATOR, AND VOLTAGE REFERENCE SLVS602 - MARCH 2006 Operational Amplifier Electrical Characteristics VCC+ = 5 V, VCC- = GND, R1 connected to VCC/2 (unless otherwise noted) PARAMETER VIO Input offset voltage VIO Input offset voltage drift TEST CONDITIONS TA MIN 25C TYP MAX 1 4.5 Full range IIO Input offset current IIB Input bias current AVD Large-signal voltage gain VCC+ = 30 V, R1 = 10 k, VO = 5 V to 25 V kSVR Supply-voltage rejection ratio VCC+ = 5 V to 30 V 6.5 25C 10 25C 5 Full range 25C 20 100 200 25C 50 Full range 25 mV V/C 20 40 Full range UNIT 100 nA nA V/mV 25C 80 25C VCC- 100 VCC+ - 1.8 dB Full range VCC- VCC+ - 2.2 VICM Input common-mode voltage CMRR Common-mode rejection ratio VCC+ = 30 V, VICM = 0 V to VCC+ - 1.8 V ISC Short-circuit current VID = 1 V, VO = 2.5 V VOH High-level output voltage VCC+ = 30 V, RL = 10 k VOL Low-level output voltage RL = 10 k SR Slew rate VCC = 15 V, CL = 100 pF, VI = 10 V, RL = 10 k 25C 1.3 2 V/s GBW Gain bandwidth product RL = 10 k, CL = 100 pF, f = 100 kHz 25C 1.4 2.1 MHz m Phase margin RL = 10 k, CL = 100 pF 25C 45 THD Total harmonic distortion 25C 0.01 % Vn Equivalent input noise voltage 25C 19 25C Source Sink f = 1 kHz Submit Documentation Feedback 70 90 3 6 3 6 25C 27 28 Full range 26 25C 25C 130 Full range V dB mA V 170 200 mV nV/Hz 3 TSM102,, TSM102A DUAL OPERATIONAL AMPLIFIER, DUAL COMPARATOR, AND VOLTAGE REFERENCE www.ti.com SLVS602 - MARCH 2006 Comparator Electrical Characteristics VCC+ = 5 V, VCC- = GND (unless otherwise noted) PARAMETER VIO Input offset voltage VID Comparator differential input voltage IIO Input offset current IIB Input bias current IOH High-level output current TEST CONDITIONS TA MIN TYP 5 Full range 9 Full range VID = 1 V, VCC = VO = 30 V MAX 25C VCC+ 25C 50 Full range 150 25C 250 Full range 400 25C 0.1 Full range 250 mV V nA nA nA 1 25C UNIT 400 A VOL Low-level output voltage VID = -1 V, Isink = 4 mA AVD Large-signal voltage gain VCC+ = 15 V, R1 = 15 k, VO = 1 V to 11 V 25C Isink Output sink current VO = 1.5 V, VID = -1 V 25C 6 VICM Input common-mode voltage range 25C 0 VCC+ - 1.5 Full range 0 VCC+ - 2 tRESP Response time (1) R1 = 5.1 k to VCC+, VREF = 1.4 V 25C 1.3 s Large-signal response time R1 = 5.1 k to VCC+, VREF = 1.4 V, VI = TTL 25C 300 ns tRESP,large (1) 4 Full range 700 mV 200 V/mV 16 mA V The response-time specification is for 100-mV input step with 5-mV overdrive. For larger overdrive signals, 300 ns can be obtained. Submit Documentation Feedback TSM102,, TSM102A DUAL OPERATIONAL AMPLIFIER, DUAL COMPARATOR, AND VOLTAGE REFERENCE www.ti.com SLVS602 - MARCH 2006 Voltage-Reference Electrical Characteristics PARAMETER TEST CONDITIONS TSM102 TA VKA = VREF, IK = 10 mA, See Figure 1 MIN TYP MAX 25C 2.475 2.5 2.525 25C 2.49 2.5 2.51 VREF Reference voltage (1) VREF Reference input voltage deviation over temperature range (1) VKA = VREF, IK = 10 mA, See Figure 1 Full range 7 30 DVREF DT Average temperature coefficient of reference input voltage (2) VKA = VREF, IK = 10 mA Full range 22 100 DVREF DVKA Ratio of change in reference voltage to change in cathode voltage VKA = 3 V to 36 V, IK = 10 mA, See Figure 2 25C -1.1 -2 IREF Reference input current IK = 10 mA, R1 = 10 k, R2 = , See Figure 2 25C 1.5 2.5 IREF Reference input current deviation over temperature range IK = 10 mA, R1 = 10 k, R2 = , See Figure 2 Imin Minimum cathode current for regulation IK,OFF Off-state cathode current (1) (2) TSM102A Full range UNIT V mV ppm/C 3 mV/V A Full range 0.5 1 A VKA = VREF, See Figure 1 25C 0.5 1 mA See Figure 3 25C 180 500 nA VREF is defined as the difference between the maximum and minimum values obtained over the full temperature range. VREF = VREF(MAX) - VREF(MIN) The temperature coefficient is defined as the slopes (positive and negative) of the voltage vs temperature limits within which the reference voltage is specified. -n VREF(MAX) pp m/ C pm/ +n p C MAX 2.5 V MIN VREF(MIN) T1 T2 Temperature Temperature 25C Submit Documentation Feedback 5 TSM102,, TSM102A DUAL OPERATIONAL AMPLIFIER, DUAL COMPARATOR, AND VOLTAGE REFERENCE www.ti.com SLVS602 - MARCH 2006 PARAMETER MEASUREMENT INFORMATION Input VKA IK VREF Figure 1. Test Circuit for VKA = VREF VKA Input VKA = VREF (1 + (R1/R2)) + (IREF x R1) IK R1 IREF R2 VREF Figure 2. Test Circuit for VKA > VREF VKA Input IOFF Figure 3. Test Circuit for IOFF 6 Submit Documentation Feedback TSM102,, TSM102A DUAL OPERATIONAL AMPLIFIER, DUAL COMPARATOR, AND VOLTAGE REFERENCE www.ti.com SLVS602 - MARCH 2006 TYPICAL CHARACTERISTICS AMPLIFIER TOTAL HARMONIC DISTORTION vs FREQUENCY AMPLIFIER NOISE VOLTAGE vs FREQUENCY 400 350 0.1 nV/OHz Voltage Noise - nV/rtHz THD - Total Harmonic Distortion - % 1 0.01 0.001 300 250 200 150 100 50 0.0001 100 100 0 10k 10000 1k 1000 100k 100000 10 100 f - Frequency - Hz Figure 4. Figure 5. GAIN AND PHASE vs FREQUENCY VREF STABILITY vs CAPACITANCE 180 50 140 40 Phase 30 100 60 10 -20 0 -60 -10 -100 -20 -140 25 Current - mA 20 Gain 100000 100k 35 Phase - deg Gain - dB 30 10000 10k f - Frequency - Hz 60 20 1000 1k 20 15 10 -30 1k 1.E+03 10k 1.E+04 100k 1.E+05 1M 1.E+06 f - Frequency - Hz -180 10M 1.E+07 5 0 1 10 100 1000 10000 Capacitance - pF Figure 6. Figure 7. Submit Documentation Feedback 7 TSM102,, TSM102A DUAL OPERATIONAL AMPLIFIER, DUAL COMPARATOR, AND VOLTAGE REFERENCE www.ti.com SLVS602 - MARCH 2006 TYPICAL CHARACTERISTICS (continued) VREF vs TEMPERATURE 2.515 IO = 100 mA 2.510 2.505 VREF - V 2.500 IO = 10 mA 2.495 2.490 IO = 1 mA 2.485 2.480 -40 -25 -10 5 20 35 50 65 80 Temperature - C Figure 8. 8 Submit Documentation Feedback 95 110 125 PACKAGE OPTION ADDENDUM www.ti.com 24-May-2007 PACKAGING INFORMATION Orderable Device Status (1) Package Type Package Drawing Pins Package Eco Plan (2) Qty TSM102AID ACTIVE SOIC D 16 40 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TSM102AIDG4 ACTIVE SOIC D 16 40 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TSM102AIDR ACTIVE SOIC D 16 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TSM102AIDRG4 ACTIVE SOIC D 16 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TSM102AIPW ACTIVE TSSOP PW 16 90 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TSM102AIPWG4 ACTIVE TSSOP PW 16 90 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TSM102AIPWR ACTIVE TSSOP PW 16 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TSM102AIPWRG4 ACTIVE TSSOP PW 16 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TSM102ID ACTIVE SOIC D 16 40 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TSM102IDG4 ACTIVE SOIC D 16 40 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TSM102IDR ACTIVE SOIC D 16 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TSM102IDRG4 ACTIVE SOIC D 16 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TSM102IPW ACTIVE TSSOP PW 16 90 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TSM102IPWG4 ACTIVE TSSOP PW 16 90 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TSM102IPWR ACTIVE TSSOP PW 16 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TSM102IPWRG4 ACTIVE TSSOP PW 16 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Lead/Ball Finish MSL Peak Temp (3) (1) The marketing status values are defined as follows: ACTIVE: Product device recommended for new designs. LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect. NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design. PREVIEW: Device has been announced but is not in production. Samples may or may not be available. OBSOLETE: TI has discontinued the production of the device. (2) Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check http://www.ti.com/productcontent for the latest availability information and additional product content details. TBD: The Pb-Free/Green conversion plan has not been defined. Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes. Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and package, or 2) lead-based die adhesive used between the die and leadframe. The component is otherwise considered Pb-Free (RoHS compatible) as defined above. Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame retardants (Br or Sb do not exceed 0.1% by weight in homogeneous material) Addendum-Page 1 PACKAGE OPTION ADDENDUM www.ti.com 24-May-2007 (3) MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature. Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis. Addendum-Page 2 PACKAGE MATERIALS INFORMATION www.ti.com 14-Jul-2012 TAPE AND REEL INFORMATION *All dimensions are nominal Device Package Package Pins Type Drawing SPQ Reel Reel A0 Diameter Width (mm) (mm) W1 (mm) B0 (mm) K0 (mm) P1 (mm) W Pin1 (mm) Quadrant 10.3 2.1 8.0 16.0 Q1 TSM102AIDR SOIC D 16 2500 330.0 16.4 6.5 TSM102AIPWR TSSOP PW 16 2000 330.0 12.4 6.9 5.6 1.6 8.0 12.0 Q1 TSM102IDR SOIC D 16 2500 330.0 16.4 6.5 10.3 2.1 8.0 16.0 Q1 TSM102IPWR TSSOP PW 16 2000 330.0 12.4 6.9 5.6 1.6 8.0 12.0 Q1 Pack Materials-Page 1 PACKAGE MATERIALS INFORMATION www.ti.com 14-Jul-2012 *All dimensions are nominal Device Package Type Package Drawing Pins SPQ Length (mm) Width (mm) Height (mm) TSM102AIDR SOIC D 16 2500 367.0 367.0 38.0 TSM102AIPWR TSSOP PW 16 2000 367.0 367.0 35.0 TSM102IDR SOIC D 16 2500 367.0 367.0 38.0 TSM102IPWR TSSOP PW 16 2000 367.0 367.0 35.0 Pack Materials-Page 2 IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, enhancements, improvements and other changes to its semiconductor products and services per JESD46C and to discontinue any product or service per JESD48B. Buyers should obtain the latest relevant information before placing orders and should verify that such information is current and complete. All semiconductor products (also referred to herein as "components") are sold subject to TI's terms and conditions of sale supplied at the time of order acknowledgment. TI warrants performance of its components to the specifications applicable at the time of sale, in accordance with the warranty in TI's terms and conditions of sale of semiconductor products. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where mandated by applicable law, testing of all parameters of each component is not necessarily performed. TI assumes no liability for applications assistance or the design of Buyers' products. Buyers are responsible for their products and applications using TI components. To minimize the risks associated with Buyers' products and applications, Buyers should provide adequate design and operating safeguards. TI does not warrant or represent that any license, either express or implied, is granted under any patent right, copyright, mask work right, or other intellectual property right relating to any combination, machine, or process in which TI components or services are used. Information published by TI regarding third-party products or services does not constitute a license to use such products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from TI under the patents or other intellectual property of TI. Reproduction of significant portions of TI information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. TI is not responsible or liable for such altered documentation. Information of third parties may be subject to additional restrictions. Resale of TI components or services with statements different from or beyond the parameters stated by TI for that component or service voids all express and any implied warranties for the associated TI component or service and is an unfair and deceptive business practice. TI is not responsible or liable for any such statements. Buyer acknowledges and agrees that it is solely responsible for compliance with all legal, regulatory and safety-related requirements concerning its products, and any use of TI components in its applications, notwithstanding any applications-related information or support that may be provided by TI. Buyer represents and agrees that it has all the necessary expertise to create and implement safeguards which anticipate dangerous consequences of failures, monitor failures and their consequences, lessen the likelihood of failures that might cause harm and take appropriate remedial actions. Buyer will fully indemnify TI and its representatives against any damages arising out of the use of any TI components in safety-critical applications. In some cases, TI components may be promoted specifically to facilitate safety-related applications. With such components, TI's goal is to help enable customers to design and create their own end-product solutions that meet applicable functional safety standards and requirements. Nonetheless, such components are subject to these terms. No TI components are authorized for use in FDA Class III (or similar life-critical medical equipment) unless authorized officers of the parties have executed a special agreement specifically governing such use. Only those TI components which TI has specifically designated as military grade or "enhanced plastic" are designed and intended for use in military/aerospace applications or environments. Buyer acknowledges and agrees that any military or aerospace use of TI components which have not been so designated is solely at the Buyer's risk, and that Buyer is solely responsible for compliance with all legal and regulatory requirements in connection with such use. TI has specifically designated certain components which meet ISO/TS16949 requirements, mainly for automotive use. Components which have not been so designated are neither designed nor intended for automotive use; and TI will not be responsible for any failure of such components to meet such requirements. Products Applications Audio www.ti.com/audio Automotive and Transportation www.ti.com/automotive Amplifiers amplifier.ti.com Communications and Telecom www.ti.com/communications Data Converters dataconverter.ti.com Computers and Peripherals www.ti.com/computers DLP(R) Products www.dlp.com Consumer Electronics www.ti.com/consumer-apps DSP dsp.ti.com Energy and Lighting www.ti.com/energy Clocks and Timers www.ti.com/clocks Industrial www.ti.com/industrial Interface interface.ti.com Medical www.ti.com/medical Logic logic.ti.com Security www.ti.com/security Power Mgmt power.ti.com Space, Avionics and Defense www.ti.com/space-avionics-defense Microcontrollers microcontroller.ti.com Video and Imaging www.ti.com/video RFID www.ti-rfid.com OMAP Mobile Processors www.ti.com/omap TI E2E Community e2e.ti.com Wireless Connectivity www.ti.com/wirelessconnectivity Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265 Copyright (c) 2012, Texas Instruments Incorporated