Data brief
For further information contact your local STMicroelectronics sales office.
August 2010 Doc ID 17770 Rev 1 1/3
3
STM8/128-EVAL
STM8/128-EVAL evaluation board
Features
Two 5 V power supply options: power jack or
daughterboard
Audio play and record
1 Gbyte or more micro SD Card™
Both A and B type smartcard support
64 Kbit I2C EEPROM
2 channels of RS-232 communication
IrDA transceiver
2 channels of LIN communication
CAN2.0A/B compliant connection
Inductor motor control connector
SWIM and STice debug support
122x32 dot-matrix serial interface LCD module
Joystick with 4-direction control and selector
Reset, Wakeup, Tamper and User button
4LEDs
Extension connector for daughterboard or
wrapping board
Description
The STM8S2xx evaluation board STM8/128-
EVAL is designed as a complete development
platform for the STM8 core-based STM8S2xx
microcontroller with CAN2.0A/B compliant
interface, I2C, SPI, two UART channels with
smartcard, IrDA and LIN support, internal 2 Kbyte
data Flash and 128 Kbyte Flash program
memory, SWIM debugging support.
The full range of hardware features helps you to
evaluate all peripherals (including motor control,
CAN, micro SD Card, smartcard, UART, LIN,
IrDA) and develop your own applications.
Extension headers make it possible to easily
connect a daughterboard or wrapping board for
your specific application.
www.st.com
Ordering information STM8/128-EVAL
2/3 Doc ID 17770 Rev 1
1 Ordering information
2 Revision history
Table 1. Device summary
Order code Reference
STM8/128-EVAL STM8/128-EVAL evaluation board
Table 2. Document revision history
Date Revision Changes
09-Aug-2010 1 Initial release.
STM8/128-EVAL
Doc ID 17770 Rev 1 3/3
Please Read Carefully:
Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the
right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any
time, without notice.
All ST products are sold pursuant to ST’s terms and conditions of sale.
Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no
liability whatsoever relating to the choice, selection or use of the ST products and services described herein.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this
document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products
or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such
third party products or services or any intellectual property contained therein.
UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED
WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED
WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS
OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT.
UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT
RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING
APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY,
DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE
GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK.
Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void
any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any
liability of ST.
ST and the ST logo are trademarks or registered trademarks of ST in various countries.
Information in this document supersedes and replaces all information previously supplied.
The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners.
© 2010 STMicroelectronics - All rights reserved
STMicroelectronics group of companies
Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan -
Malaysia - Malta - Morocco - Philippines - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America
www.st.com
Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
STMicroelectronics:
STM8/128-EVAL