STD3NK90ZT4, STP3NK90Z, STP3NK90ZFP Datasheet N-channel 900 V, 3.6 typ., 3 A SuperMESHTM Power MOSFETs in DPAK, TO-220 and TO-220FP packages Features TAB DPAK Order code 2 3 1 VDS RDS(on) max. ID STD3NK90ZT4 Package DPAK TAB STP3NK90Z TO-220 1 2 3 TO-220FP 1 2 STP3NK90ZFP 3 D(2, TAB) G(1) 900 V * * * * * 4.8 3A TO-220 TO-220FP Extremely high dv/dt capability 100% avalanche tested Gate charge minimized Very low intrinsic capacitance Zener-protected Applications * S(3) Switching applications AM01475V1 Description Product status link These high-voltage devices are Zener-protected N-channel Power MOSFETs developed using the SuperMESHTM technology by STMicroelectronics, an optimization of the well-established PowerMESHTM. In addition to a significant reduction in on-resistance, these devices are designed to ensure a high level of dv/dt capability for the most demanding applications. STD3NK90ZT4 STP3NK90Z STP3NK90ZFP DS2980 - Rev 3 - August 2018 For further information contact your local STMicroelectronics sales office. www.st.com STD3NK90ZT4, STP3NK90Z, STP3NK90ZFP Electrical ratings 1 Electrical ratings Table 1. Absolute maximum ratings Symbol Value Parameter DPAK, TO-220 TO-220FP Unit VDS Drain-source voltage 900 V VGS Gate-source voltage 30 V ID Drain current (continuous) at TC = 25 C ID Drain current (continuous) at TC = 100 C IDM (2) 1.89 Drain current (pulsed) 12 PTOT Total dissipation at TC = 25 C 90 ESD Gate-source human body model (R = 1,5 k, C = 100 pF) dv/dt (3) VISO Tj 3 (1) 3 (1) Peak diode recovery voltage slope W 4 kV 4.5 V/ns Insulation withstand voltage (RMS) from all three 2.5 leads to external heat sink (t = 1 s; Tc = 25 C) kV -55 to 150 Storage temperature range A A 25 Operating junction temperature range Tstg 1.89 12 A (1) C 1. Limited by maximum junction temperature. 2. Pulse width limited by safe operating area. 3. ISD 3 A, di/dt 200 A/s, VDS(peak) V(BR)DSS, VDD = 80% V(BR)DSS. Table 2. Thermal data Symbol Value Parameter DPAK Rthj-case Thermal resistance junction-case Rthj-amb Thermal resistance junction-ambient Rthj-pcb (1) TO-220 TO-220FP 1.38 Thermal resistance junction-pcb Unit 5 62.5 C/W 50 1. When mounted on 1inch FR-4, 2 Oz copper board. Table 3. Avalanche characteristics Symbol IAR (1) EAS (2) Parameter Avalanche current, repetitive or not-repetitive Single pulse avalanche energy Value Unit 3 A 180 mJ 1. Pulse width limited by Tjmax. 2. Starting Tj = 25C, ID = IAR, VDD = 50 V. DS2980 - Rev 3 page 2/24 STD3NK90ZT4, STP3NK90Z, STP3NK90ZFP Electrical characteristics 2 Electrical characteristics (TCASE = 25 C unless otherwise specified) Table 4. On/off states Symbol V(BR)DSS Parameter Drain-source breakdown voltage Test conditions Min. ID = 1 mA, VGS = 0 V Typ. 900 Zero gate voltage drain current IGSS Gate body leakage current VDS = 0 V, VGS = 20 V VGS(th) Gate threshold voltage VDS = VGS, ID = 50 A RDS(on) Static drain-source on resistance VGS = 10 V, ID = 1.5 A VGS = 0 V, VDS = 900 V, TC = 125 C 1 A 50 A 10 A 3.75 4.5 V 3.6 4.8 Typ. Max. Unit - pF - pF - nC (1) 3 Unit V VGS = 0 V, VDS = 900 V IDSS Max. 1. Defined by design, not subject to production test. Table 5. Dynamic Symbol Parameter Ciss Input capacitance Coss Output capacitance Crss Reverse transfer capacitance Coss eq. (1) Equivalent output capacitance Qg Total gate charge Qgs Gate-source charge Qgd Gate-drain charge Test conditions Min. 590 VDS = 25 V, f = 1 MHz, VGS = 0 V - 63 13 VDS = 0 to 720 V, VGS = 0 V VDD = 720 V, ID = 3 A, VGS = 0 to 10 V (see Figure 16. Test circuit for gate charge behavior) - 35 22.7 - 4.2 12 1. Coss eq. is defined as a constant equivalent capacitance giving the same charging time as Coss when VDS increases from 0 to 80% VDSS. Table 6. Switching times Symbol td(on) tr td(off) tf DS2980 - Rev 3 Parameter Test conditions Turn-on delay time VDD = 450 V, ID = 1.5 A, Rise time RG = 4.7 , VGS = 10 V Turn-off delay time (see Figure 15. Test circuit for resistive load switching times and Figure 20. Switching time waveform) Fall time Min. Typ. Max. Unit - ns 18 - 7 45 18 page 3/24 STD3NK90ZT4, STP3NK90Z, STP3NK90ZFP Electrical characteristics Table 7. Source drain diode Symbol Parameter Test conditions ISD Source-drain current ISDM (1) Source-drain current (pulsed) VSD (2) Forward on voltage ISD = 3 A, VGS = 0 V trr Reverse recovery time ISD = 3 A, di/dt = 100 A/s Qrr Reverse recovery charge VDD = 40 V, TJ = 150 C Reverse recovery current (see Figure 17. Test circuit for inductive load switching and diode recovery times) IRRM Min. Typ. Max. Unit 3 - 12 - - 1.6 A V 510 ns 2.2 C 8.7 A 1. Pulse width limited by safe operating area. 2. Pulsed: pulse duration = 300 s, duty cycle 1.5%. Table 8. Gate-source Zener diode Symbol V(BR)GSO Parameter Gate-source breakdown voltage Test conditions IGS = 1 mA, ID = 0 A Min. Typ. Max. Unit 30 - - V The built-in back-to-back Zener diodes are specifically designed to enhance the ESD performance of the device. The Zener voltage facilitates efficient and cost-effective device integrity protection, thus eliminating the need for additional external componentry. DS2980 - Rev 3 page 4/24 STD3NK90ZT4, STP3NK90Z, STP3NK90ZFP Electrical characteristics curves 2.1 Electrical characteristics curves Figure 1. Safe operating area for DPAK, TO-220 Figure 2. Thermal impedance for DPAK, TO-220 Figure 3. Safe operating area for TO-220FP Figure 4. Thermal impedance for TO-220FP K GC20940_ZTH =0.5 0.1 =0.2 0.05 0.02 10 -1 0.01 Single pulse 10 -2 10 Figure 5. Output characterisics DS2980 - Rev 3 -3 10-4 10-3 10 -2 10 -1 10 0 tp(s) Figure 6. Transfer characteristics page 5/24 STD3NK90ZT4, STP3NK90Z, STP3NK90ZFP Electrical characteristics curves Figure 7. Static drain-source on resistance Figure 8. Gate charge vs gate-source voltage Figure 9. Capacitance variations Figure 10. Normalized gate threshold voltage vs temperature Figure 11. Normalized on resistance vs temperature Figure 12. Source-drain diode forward characteristics DS2980 - Rev 3 page 6/24 STD3NK90ZT4, STP3NK90Z, STP3NK90ZFP Electrical characteristics curves Figure 13. Maximum avalanche energy vs temperature DS2980 - Rev 3 Figure 14. Normalized V(BR)DSS vs temperature page 7/24 STD3NK90ZT4, STP3NK90Z, STP3NK90ZFP Test circuits 3 Test circuits Figure 15. Test circuit for resistive load switching times Figure 16. Test circuit for gate charge behavior VDD 12 V 2200 + F 3.3 F VDD VD VGS 1 k 100 nF RL IG= CONST VGS RG 47 k + pulse width D.U.T. 2.7 k 2200 F pulse width D.U.T. 100 VG 47 k 1 k AM01469v1 AM01468v1 Figure 17. Test circuit for inductive load switching and diode recovery times D G A D.U.T. S 25 A L A B B 3.3 F D G + VD 100 H fast diode B Figure 18. Unclamped inductive load test circuit RG 1000 + F 2200 + F VDD 3.3 F VDD ID D.U.T. S D.U.T. Vi _ pulse width AM01471v1 AM01470v1 Figure 20. Switching time waveform Figure 19. Unclamped inductive waveform ton V(BR)DSS td(on) VD toff td(off) tr tf 90% 90% IDM VDD 10% 0 ID VDD AM01472v1 VGS 0 VDS 10% 90% 10% AM01473v1 DS2980 - Rev 3 page 8/24 STD3NK90ZT4, STP3NK90Z, STP3NK90ZFP Package information 4 Package information In order to meet environmental requirements, ST offers these devices in different grades of ECOPACK(R) packages, depending on their level of environmental compliance. ECOPACK(R) specifications, grade definitions and product status are available at: www.st.com. ECOPACK(R) is an ST trademark. DS2980 - Rev 3 page 9/24 STD3NK90ZT4, STP3NK90Z, STP3NK90ZFP DPAK (TO-252) type A2 package information 4.1 DPAK (TO-252) type A2 package information Figure 21. DPAK (TO-252) type A2 package outline 0068772_type-A2_rev25 DS2980 - Rev 3 page 10/24 STD3NK90ZT4, STP3NK90Z, STP3NK90ZFP DPAK (TO-252) type A2 package information Table 9. DPAK (TO-252) type A2 mechanical data Dim. mm Min. Max. A 2.20 2.40 A1 0.90 1.10 A2 0.03 0.23 b 0.64 0.90 b4 5.20 5.40 c 0.45 0.60 c2 0.48 0.60 D 6.00 6.20 D1 4.95 E 6.40 E1 5.10 5.20 5.30 e 2.159 2.286 2.413 e1 4.445 4.572 4.699 H 9.35 10.10 L 1.00 1.50 L1 2.60 2.80 3.00 L2 0.65 0.80 0.95 L4 0.60 R V2 DS2980 - Rev 3 Typ. 5.10 5.25 6.60 1.00 0.20 0 8 page 11/24 STD3NK90ZT4, STP3NK90Z, STP3NK90ZFP DPAK (TO-252) type C2 package information 4.2 DPAK (TO-252) type C2 package information Figure 22. DPAK (TO-252) type C2 package outline 0068772_C2_25 DS2980 - Rev 3 page 12/24 STD3NK90ZT4, STP3NK90Z, STP3NK90ZFP DPAK (TO-252) type C2 package information Table 10. DPAK (TO-252) type C2 mechanical data Dim. mm Min. Typ. Max. A 2.20 2.30 2.38 A1 0.90 1.01 1.10 A2 0.00 0.10 b 0.72 0.85 b4 5.13 c 0.47 0.60 c2 0.47 0.60 D 6.00 D1 5.10 E 6.50 E1 5.20 e 2.186 2.286 2.386 H 9.80 10.10 10.40 L 1.40 1.50 1.70 L1 L2 6.20 5.60 6.60 6.70 5.50 0.90 1.25 0.51 BSC 0.60 L6 DS2980 - Rev 3 6.10 5.46 2.90 REF L3 L4 5.33 0.80 1.00 1.80 BSC 1 5 7 9 2 5 7 9 V2 0 8 page 13/24 STD3NK90ZT4, STP3NK90Z, STP3NK90ZFP DPAK (TO-252) type C2 package information Figure 23. DPAK (TO-252) recommended footprint (dimensions are in mm) FP_0068772_25 DS2980 - Rev 3 page 14/24 STD3NK90ZT4, STP3NK90Z, STP3NK90ZFP DPAK (TO-252) packing information 4.3 DPAK (TO-252) packing information Figure 24. DPAK (TO-252) tape outline 10 pitches cumulative tolerance on tape +/- 0.2 mm T P0 Top cover tape P2 D E F B1 K0 For machine ref. only including draft and radii concentric around B0 W B0 A0 P1 D1 User direction of feed R Bending radius User direction of feed AM08852v1 DS2980 - Rev 3 page 15/24 STD3NK90ZT4, STP3NK90Z, STP3NK90ZFP DPAK (TO-252) packing information Figure 25. DPAK (TO-252) reel outline T 40mm min. access hole at slot location B D C N A G measured at hub Tape slot in core for tape start 2.5mm min.width Full radius AM06038v1 Table 11. DPAK (TO-252) tape and reel mechanical data Tape Dim. mm mm Dim. Min. Max. A0 6.8 7 A B0 10.4 10.6 B 1.5 12.1 C 12.8 1.6 D 20.2 G 16.4 50 B1 DS2980 - Rev 3 Reel Min. Max. 330 13.2 D 1.5 D1 1.5 E 1.65 1.85 N F 7.4 7.6 T K0 2.55 2.75 P0 3.9 4.1 Base qty. 2500 P1 7.9 8.1 Bulk qty. 2500 P2 1.9 2.1 R 40 T 0.25 0.35 W 15.7 16.3 18.4 22.4 page 16/24 STD3NK90ZT4, STP3NK90Z, STP3NK90ZFP TO-220 type A package information 4.4 TO-220 type A package information Figure 26. TO-220 type A package outline 0015988_typeA_Rev_21 DS2980 - Rev 3 page 17/24 STD3NK90ZT4, STP3NK90Z, STP3NK90ZFP TO-220 type A package information Table 12. TO-220 type A package mechanical data Dim. mm Min. Max. A 4.40 4.60 b 0.61 0.88 b1 1.14 1.55 c 0.48 0.70 D 15.25 15.75 D1 DS2980 - Rev 3 Typ. 1.27 E 10.00 10.40 e 2.40 2.70 e1 4.95 5.15 F 1.23 1.32 H1 6.20 6.60 J1 2.40 2.72 L 13.00 14.00 L1 3.50 3.93 L20 16.40 L30 28.90 oP 3.75 3.85 Q 2.65 2.95 page 18/24 STD3NK90ZT4, STP3NK90Z, STP3NK90ZFP TO-220FP package information 4.5 TO-220FP package information Figure 27. TO-220FP package outline 7012510_Rev_12_B DS2980 - Rev 3 page 19/24 STD3NK90ZT4, STP3NK90Z, STP3NK90ZFP TO-220FP package information Table 13. TO-220FP package mechanical data Dim. mm Min. Max. A 4.4 4.6 B 2.5 2.7 D 2.5 2.75 E 0.45 0.7 F 0.75 1 F1 1.15 1.70 F2 1.15 1.70 G 4.95 5.2 G1 2.4 2.7 H 10 10.4 L2 DS2980 - Rev 3 Typ. 16 L3 28.6 30.6 L4 9.8 10.6 L5 2.9 3.6 L6 15.9 16.4 L7 9 9.3 Dia 3 3.2 page 20/24 STD3NK90ZT4, STP3NK90Z, STP3NK90ZFP Ordering information 5 Ordering information Table 14. Order codes DS2980 - Rev 3 Order code Marking Package Packing STD3NK90ZT4 D3NK90Z DPAK Tape and reel STP3NK90Z P3NK90Z TO-220 STP3NK90ZFP P3NK90ZFP TO-220FP Tube page 21/24 STD3NK90ZT4, STP3NK90Z, STP3NK90ZFP Revision history Table 15. Document revision history Date Version 24-Oct-2006 1 Changes First release. - The part number STD3NK90Z-1 has been moved to a separate datasheet 29-Jan-2013 2 - Minor text changes - Updated: Section 4: Package mechanical data Removed maturity status indication from cover page. The document status is production data. 20-Aug-2018 3 Updated title in cover page, Section 1 Electrical ratings, Section 2 Electrical characteristics and Section 4 Package information. Minor text changes. DS2980 - Rev 3 page 22/24 STD3NK90ZT4, STP3NK90Z, STP3NK90ZFP Contents Contents 1 Electrical ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 2 Electrical characteristics. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 2.1 Electrical characteristics curves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 3 Test circuits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8 4 Package information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 5 4.1 DPAK (TO-252) type A2 package information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 4.2 DPAK (TO-252) type C2 package information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 4.3 DPAK (TO-252) packing information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 4.4 TO-220 type A package information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 4.5 TO-220FP package information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 Ordering information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21 Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22 DS2980 - Rev 3 page 23/24 STD3NK90ZT4, STP3NK90Z, STP3NK90ZFP IMPORTANT NOTICE - PLEASE READ CAREFULLY STMicroelectronics NV and its subsidiaries ("ST") reserve the right to make changes, corrections, enhancements, modifications, and improvements to ST products and/or to this document at any time without notice. Purchasers should obtain the latest relevant information on ST products before placing orders. ST products are sold pursuant to ST's terms and conditions of sale in place at the time of order acknowledgement. Purchasers are solely responsible for the choice, selection, and use of ST products and ST assumes no liability for application assistance or the design of Purchasers' products. No license, express or implied, to any intellectual property right is granted by ST herein. Resale of ST products with provisions different from the information set forth herein shall void any warranty granted by ST for such product. ST and the ST logo are trademarks of ST. All other product or service names are the property of their respective owners. Information in this document supersedes and replaces information previously supplied in any prior versions of this document. (c) 2018 STMicroelectronics - All rights reserved DS2980 - Rev 3 page 24/24