TECHNICAL DATA SHEET
Gort Road Business Park, Ennis, Co. Clare, Ireland. 6 Lake Street, Lawrence, MA 01841
Tel: +353 (0) 65 6840044, Fax: +353 (0) 65 6822298 Tel: 1-800-446-1158 / (978) 794-1666, Fax: (978) 6890803
Website: http://www.microsemi.com
RF01011 Rev B, August 2010 High Reliability Product Group Page 1 of 4
DEVICES M15KP22A thru M15KP280CA, e3
LEVELS
M, MA, MX, MXL
FEATURES
High reliability controlled devices with wafer fabrication and assembly lot traceability
100 % surge tested devices
Suppresses transients up to 15 kW @ 10/1000 µs and 100 kW @ 8/20 µs (see Figure 1)
Optional upscreening available by replacing M prefix with MA, MX or MXL prefixes. These prefixes specify
various screening and conformance inspection options based on MIL-PRF-19500. Refer to MicroNote 129
for more details on the screening options
Moisture classification is Level 1 with no dry pack required per IPC/JEDEC J-STD-020B
RoHS Compliant devices available by adding “e3” suffix
3σ lot norm screening performed on Standby Current ID
APPLICATIONS / BENEFITS
Protection from switching transients and induced RF
Fast response
Protection from ESD, and EFT per IEC 61000-4-2 and IEC 61000-4-4
Secondary lightning protection per IEC 61000-4-5 with 42 Ohms source impedance:
o Class 1,2,3,4: M15KP22A to M15KP280CA
o Class 5: M15KP22A to M15KP280CA (short distance)
o Class 5: M15KP22A to M15KP110CA (long distance)
Secondary lightning protection per IEC 61000-4-5 with 12 Ohms source impedance:
o Class 1 & 2: M15KP22A to M15KP280CA
o Class 3: M15KP22A to M15KP240CA
o Class 4: M15KP22A to M15KP120CA
Secondary lightning protection per IEC 61000-4-5 with 2 Ohms source impedance:
o Class 2: M15KP22A to M15KP220CA
o Class 3: M15KP22A to M15KP110CA
o Class 4: M15KP22A to M15KP54CA
MAXIMUM RATINGS
Peak Pulse Power dissipation at 25 ºC: 15,000 watts at 10/1000 μs (also see Figures 1 and 2) with impulse
repetition rate (duty factor) of 0.05 % or less
tclamping (0 V to VBR min.): < 100 ps theoretical for unidirectional and < 5 ns for bidirectional
Operating and Storage temperature: -65 ºC to +150 ºC
Thermal resistance: 20 ºC/W junction to lead, or 80ºC/W junction to ambient when mounted on FR4 PC
board with 4 mm2 copper pads (1oz) and track width 1 mm, length 25 mm
Steady-State Power dissipation: 6 watts at TL = 30oC, or 1.56 watts at TA = 25ºC when mounted on FR4 PC
board described for thermal resistance
Forward Surge: 200 Amps 8.3 ms half-sine wave for unidirectional devices only
Solder temperatures: 260 ºC for 10 s (maximum)
15,000W Transient Voltage Suppressor
- High Reliability controlled devices
- Unidirectional (A) and Bidirectional (CA) construction
- Plastic encapsulated TVS series for Thru Hole mounting
- Selections for 22.0 to 280 V standoff voltages (VWM)
CASE 5A
(DO-204AR)
TECHNICAL DATA SHEET
Gort Road Business Park, Ennis, Co. Clare, Ireland. 6 Lake Street, Lawrence, MA 01841
Tel: +353 (0) 65 6840044, Fax: +353 (0) 65 6822298 Tel: 1-800-446-1158 / (978) 794-1666, Fax: (978) 6890803
Website: http://www.microsemi.com
___________________________________________________________________________________________________________________________________
RF01011 Rev B, August 2010 High Reliability Product Group Page 2 of 4
MECHANICAL AND PACKAGING
Void-free transfer molded thermosetting epoxy body meeting UL94V-0 requirements
Tin-Lead (90 % Sn, 10 % Pb) or RoHS (100% Sn) Compliant annealed matte-Tin plating readily solderable per MIL-
STD-750, method 2026
Body marked with part number
Band denotes cathode. Bidirectional not marked.
Available in Bulk or custom tape-and-reel packaging
TAPE-AND-REEL standard per EIA-296 for axial package (add “TR” suffix to part number)
Weight: 1.4 grams (approximate)
PACKAGE DIMENSIONS
CASE 5A
Dimensions in inches
Symbol
Definition
Symbol
Definition
VWM
Working Peak (Standoff) Voltage
IPP
Peak Pulse Current
PPP
Peak Pulse Power
VC
Clamping Voltage
VBR
Breakdown Voltage
IBR
Breakdown Current for VBR
ID
Standby Current
TECHNICAL DATA SHEET
Gort Road Business Park, Ennis, Co. Clare, Ireland. 6 Lake Street, Lawrence, MA 01841
Tel: +353 (0) 65 6840044, Fax: +353 (0) 65 6822298 Tel: 1-800-446-1158 / (978) 794-1666, Fax: (978) 6890803
Website: http://www.microsemi.com
___________________________________________________________________________________________________________________________________
RF01011 Rev B, August 2010 High Reliability Product Group Page 3 of 4
ELECTRICAL CHARACTERISTICS @ 25oC
MICROSEMI
PART
NUMBER
(Note 2)
REVERSE
STAND-OFF
VOLTAGE
VWM (Note 1)
V
MINIMUM
BREAKDOWN
VOLTAGE
VBR @ IBR
V mA
MAXIMUM
CLAMPING
VOLTAGE
VC @ IPP
V
MAXIMUM
STANDBY
CURRENT
ID @ VWM
A
MAXIMUM
PEAK
PULSE
CURRENT
IPP (FIG. 2)
A
MAXIMUM
VOLTAGE
TEMPERATURE
VARIATION
αV(BR)
mV/ ºC
M15KP22A
22
24.4
10
37.1
500
404
24
M15KP24A
M15KP26A
24
26
26.7
28.9
5
5
40.7
44.0
150
50
369
341
27
29
M15KP28A
M15KP30A
28
30
31.1
33.3
5
5
47.5
50.7
25
15
316
296
31
34
M15KP33A
M15KP36A
33
36
36.7
40.0
5
5
54.8
59.7
10
10
274
251
38
41
M15KP40A
M15KP43A
40
43
44.4
47.8
5
5
65.8
69.7
10
10
228
215
46
50
M15KP45A
M15KP48A
45
48
50.0
53.3
5
5
73.0
77.7
10
10
205
193
52
56
M15KP51A
M15KP54A
51
54
56.7
60.0
5
5
82.8
87.5
10
10
181
171
60
63
M15KP58A
M15KP60A
58
60
64.4
66.7
5
5
94.0
97.3
10
10
160
154
68
71
M15KP64A
M15KP70A
64
70
71.1
77.8
5
5
104
114
10
10
144
132
76
83
M15KP75A
M15KP78A
75
78
83.3
86.7
5
5
122
126
10
10
123
119
89
93
M15KP85A
M15KP90A
85
90
94.4
100
5
5
137
146
10
10
109
103
102
109
M15KP100A
M15KP110A
100
110
111
122
5
5
162
178
10
10
93
84
121
133
M15KP120A
M15KP130A
120
130
133
144
5
5
193
209
10
10
78
72
145
157
M15KP150A
M15KP160A
150
160
167
178
5
5
243
259
10
10
62
58
183
195
M15KP170A
M15KP180A
170
180
189
200
5
5
275
291
10
10
55
52
207
219
M15KP200A
M15KP220A
200
220
222
245
5
5
322
356
10
10
47
42
243
269
M15KP240A
M15KP260A
240
260
267
289
5
5
388
419
10
10
39
36
293
317
M15KP280A
280
311
5
452
10
33
342
NOTE 1:
Transient Voltage Suppressors are normally selected with reverse “Standoff Voltage” VWM which should
be equal to or greater than the dc or continuous peak operating voltage level.
NOTE 2:
For bidirectional construction, indicate a CA suffix after the part number.
** Consult factory for availability of the 17 and 18 Volt devices on a special order basis.
S
TECHNICAL DATA SHEET
Gort Road Business Park, Ennis, Co. Clare, Ireland. 6 Lake Street, Lawrence, MA 01841
Tel: +353 (0) 65 6840044, Fax: +353 (0) 65 6822298 Tel: 1-800-446-1158 / (978) 794-1666, Fax: (978) 6890803
Website: http://www.microsemi.com
___________________________________________________________________________________________________________________________________
RF01011 Rev B, August 2010 High Reliability Product Group Page 4 of 4
GRAPHS
PPP Peak Pulse Power - kW
C CAPACITANCE-PICOFARADS
Waveform Non-Repetitive
Peak Pulse Power (PPP) or continuous
Power in Percent of 25oC Rating
tp Pulse Time sec
FIGURE 1
Peak Pulse Power vs. Pulse Time to 50% of FIGURE 2
Exponentially Decaying Pulse
Test waveform parameters:
tr=10 s, tp=1000 s
FIGURE 2
FIGURE 2 : Pulse Waveform
Pulse WaveforPulse Waveform
TL Lead Temperature oC
FIGURE 4 Derating
V(BR) - BREAKDOWN VOLTAGE-VOLTS
FIGURE 3 Typical Capacitance vs. Breakdown Voltage
NOTE: For Bidirectional Construction, indicate a C or CA
suffix after part number. Capacitance will be one-half that
shown in Figure 3.