a FEATURES Single Supply Operation: 2.7 V to 5.5 V Low Supply Current: 45 A/Amplifier Wide Bandwidth: 1 MHz No Phase Reversal Low Input Currents: 4 pA Unity Gain Stable Rail-to-Rail Input and Output General-Purpose CMOS Rail-to-Rail Amplifiers AD8541/AD8542/AD8544 PIN CONFIGURATIONS 5-Lead SC70 and SOT-23 (KS and RT Suffixes) OUT A 1 AD8541 V 2 4 IN A +IN A 3 APPLICATIONS ASIC Input or Output Amplifier Sensor Interface Piezo Electric Transducer Amplifier Medical Instrumentation Mobile Communication Audio Output Portable Systems 8-Lead SOIC (R Suffix) NC 1 8 NC -IN A 2 7 V+ +IN A 3 6 OUT A 4 5 NC V- GENERAL DESCRIPTION The AD8541/AD8542/AD8544 are single, dual and quad railto-rail input and output single supply amplifiers featuring very low supply current and 1 MHz bandwidth. All are guaranteed to operate from a 2.7 V single supply as well as a 5 V supply. These parts provide 1 MHz bandwidth at low current consumption of 45 A per amplifier. Very low input bias currents enable the AD8541/AD8542/AD8544 to be used for integrators, photodiode amplifiers, piezo electric sensors and other applications with high source impedance. Supply current is only 45 A per amplifier, ideal for battery operation. Rail-to-rail inputs and outputs are useful to designers buffering ASICs in single supply systems. The AD8541/AD8542/AD8544 are optimized to maintain high gains at lower supply voltages, making them useful for active filters and gain stages. The AD8541/AD8542/AD8544 are specified over the extended industrial (-40C to +125C) temperature range. The AD8541 is available in 8-lead SOIC, 5-lead SC70, and 5-lead SOT-23 packages. The AD8542 is available in 8-lead SOIC, 8-lead MSOP, and 8-lead TSSOP surface-mount packages. The AD8544 is available in 14-lead narrow SOIC, and 14-lead TSSOP surface mount packages. All TSSOP, MSOP, SC70, and SOT versions are available in tape and reel only. 5 V+ AD8541 NC = NO CONNECT 8-Lead SOIC, MSOP, and TSSOP (R, RM, and RU Suffixes) OUT A 1 -IN A AD8542 8 V+ 2 7 OUT B +IN A 3 6 -IN B V- 4 5 +IN B 14-Lead SOIC and TSSOP (R and RU Suffixes) OUT A 1 14 OUT D -IN A 2 13 -IN D +IN A 3 12 +IN D AD8544 V+ 4 11 V- +IN B 5 -IN B 6 9 -IN C OUT B 7 8 OUT C 10 +IN C REV. B Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A. Tel: 781/329-4700 World Wide Web Site: http://www.analog.com Fax: 781/326-8703 (c) Analog Devices, Inc., 2000 AD8541/AD8542/AD8544-SPECIFICATIONS ELECTRICAL CHARACTERISTICS (V = 2.7 V, V S Parameter Symbol INPUT CHARACTERISTICS Offset Voltage VOS Input Bias Current Input Offset Current IB IOS Input Voltage Range Common-Mode Rejection Ratio CMRR Large Signal Voltage Gain AVO Offset Voltage Drift Bias Current Drift VOS /T IB /T Offset Current Drift IOS /T OUTPUT CHARACTERISTICS Output Voltage High VOH Output Voltage Low VOL Output Current IOUT ISC ZOUT Closed Loop Output Impedance POWER SUPPLY Power Supply Rejection Ratio Supply Current/Amplifier DYNAMIC PERFORMANCE Slew Rate Settling Time Gain Bandwidth Product Phase Margin NOISE PERFORMANCE Voltage Noise Density Current Noise Density CM = 1.35 V, TA = 25C unless otherwise noted) Conditions Min Unit 1 6 7 60 100 1,000 30 50 500 2.7 mV mV pA pA pA pA pA pA V dB dB V/mV V/mV V/mV V/C fA/C fA/C fA/C 4 -40C TA +85C -40C TA +125C 0.1 -40C TA +85C -40C TA +125C VCM = 0 V to 2.7 V -40C TA +125C RL = 100 k , VO = 0.5 V to 2.2 V -40C TA +85C -40C TA +125C -40C TA +125C -40C TA +85C -40C TA +125C -40C TA +125C IL = 1 mA -40C TA +125C IL = 1 mA -40C TA +125C VOUT = VS - 1 V 0 40 38 100 50 2 45 500 4 100 2,000 25 2.575 2.550 2.65 35 100 125 15 20 50 f = 200 kHz, AV = 1 65 60 SR tS GBP o RL = 100 k To 0.1% (1 V Step) 0.4 en en in f = 1 kHz f = 10 kHz ISY Max -40C TA +125C VS = 2.5 V to 6 V -40C TA +125C VO = 0 V -40C TA +125C PSRR Typ 76 38 55 75 V V mV mV mA mA dB dB A A 0.75 5 980 63 V/s s kHz Degrees 40 38 <0.1 nV/Hz nV/Hz pA/Hz Specifications subject to change without notice. -2- REV. B AD8541/AD8542/AD8544 ELECTRICAL CHARACTERISTICS (V = 3.0 V, V S Parameter Symbol INPUT CHARACTERISTICS Offset Voltage VOS Input Bias Current Input Offset Current IB IOS Input Voltage Range Common-Mode Rejection Ratio CMRR Large Signal Voltage Gain AVO Offset Voltage Drift Bias Current Drift VOS /T IB /T Offset Current Drift IOS /T OUTPUT CHARACTERISTICS Output Voltage High VOH Output Voltage Low VOL Output Current IOUT ISC ZOUT Closed Loop Output Impedance POWER SUPPLY Power Supply Rejection Ratio Supply Current/Amplifier DYNAMIC PERFORMANCE Slew Rate Settling Time Gain Bandwidth Product Phase Margin NOISE PERFORMANCE Voltage Noise Density Current Noise Density PSRR CM = 1.5 V, TA = 25C unless otherwise noted) Conditions Max Unit 1 6 7 60 100 1,000 30 50 500 3 mV mV pA pA pA pA pA pA V dB dB V/mV V/mV V/mV V/C fA/C fA/C fA/C 4 -40C TA +85C -40C TA +125C 0.1 -40C TA +85C -40C TA +125C VCM = 0 V to 3 V -40C TA +125C RL = 100 k , VO = 0.5 V to 2.2 V -40C TA +85C -40C TA +125C -40C TA +125C -40C TA +85C -40C TA +125C -40C TA +125C IL = 1 mA -40C TA +125C IL = 1 mA -40C TA +125C VOUT = VS - 1 V 0 40 38 100 50 2 2.875 2.850 500 2.955 32 100 125 18 25 50 f = 200 kHz, AV = 1 65 60 SR tS GBP o RL = 100 k To 0.01% (1 V Step) 0.4 en en in f = 1 kHz f = 10 kHz -3- 45 4 100 2,000 25 VS = 2.5 V to 6 V -40C TA +125C VO = 0 V -40C TA +125C ISY Typ -40C TA +125C Specifications subject to change without notice. REV. B Min 76 40 60 75 V V mV mV mA mA dB dB A A 0.8 5 980 64 V/s s kHz Degrees 42 38 <0.1 nV/Hz nV/Hz pA/Hz AD8541/AD8542/AD8544-SPECIFICATIONS ELECTRICAL CHARACTERISTICS (V = 5.0 V, V S Parameter Symbol INPUT CHARACTERISTICS Offset Voltage VOS Input Bias Current Input Offset Current IB IOS Input Voltage Range Common-Mode Rejection Ratio CMRR Large Signal Voltage Gain AVO Offset Voltage Drift Bias Current Drift VOS /T IB /T Offset Current Drift IOS /T OUTPUT CHARACTERISTICS Output Voltage High VOH Output Voltage Low VOL Output Current IOUT ISC ZOUT Closed Loop Output Impedance POWER SUPPLY Power Supply Rejection Ratio Supply Current/Amplifier DYNAMIC PERFORMANCE Slew Rate Full-Power Bandwidth Settling Time Gain Bandwidth Product Phase Margin NOISE PERFORMANCE Voltage Noise Density Current Noise Density PSRR CM = 2.5 V, TA = 25C unless otherwise noted) Conditions Min Max Unit 1 6 7 60 100 1,000 30 50 500 5 mV mV pA pA pA pA pA pA V dB dB V/mV V/mV V/mV V/C fA/C fA/C fA/C -40C TA +125C 4 -40C TA +85C -40C TA +125C 0.1 -40C TA +85C -40C TA +125C VCM = 0 V to 5 V -40C TA +125C RL = 100 k , VO = 0.5 V to 2.2 V -40C TA +85C -40C TA +125C -40C TA +125C -40C TA +85C -40C TA +125C -40C TA +125C IL = 1 mA -40C TA +125C IL = 1 mA -40C TA +125C VOUT = VS - 1 V 0 40 38 20 10 2 48 40 4 100 2,000 25 4.9 4.875 4.965 25 100 125 30 60 45 f = 200 kHz, AV = 1 VS = 2.5 V to 6 V -40C TA +125C VO = 0 V -40C TA +125C 65 60 SR BWP tS GBP o RL = 100 k, CL = 200 pF 1% Distortion To 0.1% (1 V Step) 0.45 en en in f = 1 kHz f = 10 kHz ISY Typ 76 45 65 85 V V mV mV mA mA dB dB A A 0.92 70 6 1,000 67 V/s kHz s kHz Degrees 42 38 <0.1 nV/Hz nV/Hz pA/Hz Specifications subject to change without notice. -4- REV. B AD8541/AD8542/AD8544 ABSOLUTE MAXIMUM RATINGS 1 PACKAGE INFORMATION Supply Voltage (VS) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 V Input Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . GND to VS Differential Input Voltage2 . . . . . . . . . . . . . . . . . . . . . . . 6 V Storage Temperature Range . . . . . . . . . . . . -65C to +150C Operating Temperature Range . . . . . . . . . . -40C to +125C Junction Temperature Range . . . . . . . . . . . . -65C to +150C Lead Temperature Range (Soldering, 60 sec) . . . . . . . 300C NOTES 1 Stresses above those listed under Absolute Maximum Ratings may cause permanent damage to the device. This is a stress rating only; functional operation of the device at these or any other conditions above those listed in the operational sections of this specification is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. 2 For supplies less than 6 V, the differential input voltage is equal to VS. Package Type JA* JC Unit 5-Lead SC70 (KS) 5-Lead SOT-23 (RT) 8-Lead SOIC (R) 8-Lead MSOP (RM) 8-Lead TSSOP (RU) 14-Lead SOIC (R) 14-Lead TSSOP (RU) 376 230 158 210 240 120 240 126 146 43 45 43 36 43 C/W C/W C/W C/W C/W C/W C/W *JA is specified for worst-case conditions, i.e., qJA is specified for device soldered onto a circuit board for surface mount packages. ORDERING GUIDE Model Temperature Range Package Description Package Option Branding Information AD8541AKS* AD8541AR AD8541ART* AD8542AR AD8542ARM* AD8542ARU* AD8544AR AD8544ARU* -40C to +125C -40C to +125C -40C to +125C -40C to +125C -40C to +125C -40C to +125C -40C to +125C -40C to +125C 5-Lead SC70 8-Lead SOIC 5-Lead SOT-23 8-Lead SOIC 8-Lead MSOP 8-Lead TSSOP 14-Lead SOIC 14-Lead TSSOP KS-5 SO-8 RT-5 SO-8 RM-8 RU-8 SO-14 RU-14 A4B A4A AVA *Available in reels only. CAUTION ESD (electrostatic discharge) sensitive device. Electrostatic charges as high as 4000 V readily accumulate on the human body and test equipment and can discharge without detection. Although the AD8541/AD8542/AD8544 features proprietary ESD protection circuitry, permanent damage may occur on devices subjected to high-energy electrostatic discharges. Therefore, proper ESD precautions are recommended to avoid performance degradation or loss of functionality. REV. B -5- WARNING! ESD SENSITIVE DEVICE AD8541/AD8542/AD8544 -Typical Performance Characteristics 120 100 80 60 40 20 0 4.5 3.5 2.5 1.5 0.5 0.5 1.5 2.5 3.5 4.5 INPUT OFFSET VOLTAGE - mV 0.0 1.0 1.5 2.0 2.5 3.0 3.5 300 250 200 150 100 0 40 20 0 5 4 3 2 1 Figure 4. Input Bias Current vs. Temperature Figure 5. Input Offset Current vs. Temperature VS = 2.7V TA = 25C OUTPUT SWING - Vp-p 100 SOURCE 10 SINK 1 0.01 0.001 2.0 1.5 1.0 0.5 0.1 0.01 0.1 1 10 LOAD CURRENT - mA 100 Figure 7. Output Voltage to Supply Rail vs. Load Current 0 1k 0.5 1.5 2.5 3.5 4.5 COMMON-MODE VOLTAGE - V 5.5 140 VS = 2.7V TA = 25C 120 100 80 PSRR 60 40 +PSRR 20 0 1k 10k 100k FREQUENCY - Hz 1M 10M Figure 6. Power Supply Rejection Ratio vs. Frequency 60 VS = 2.7V VIN = 2.5Vp-p RL = 2k TA = 25C 2.5 1k 2 40 100 3.0 10k 3 20 1 55 35 15 5 25 45 65 85 105 125 145 TEMPERATURE - C 20 40 60 80 100 120 140 TEMPERATURE - C 4 160 VS = 2.7V AND 5V VCM = VS /2 0 50 OUTPUT VOLTAGE - mV 6 5 Figure 3. Input Bias Current vs. Common-Mode Voltage POWER SUPPLY REJECTION - dB 7 6 0 0.5 Figure 2. Input Offset Voltage vs. Temperature VS = 2.7V AND 5V VCM = VS /2 7 1 4.0 55 35 15 5 25 45 65 85 105 125 145 TEMPERATURE - C INPUT OFFSET CURRENT - pA INPUT BIAS CURRENT - pA 350 VS = 2.7V AND 5V 8 VCM = VS /2 0.5 Figure 1. Input Offset Voltage Distribution 400 9 VS = 2.7V AND 5V 0.5 VCM = VS /2 10k 100k 1M FREQUENCY - Hz 10M Figure 8. Closed-Loop Output Voltage Swing vs. Frequency -6- SMALL SIGNAL OVERSHOOT - % NUMBER OF AMPLIFIERS 140 1.0 INPUT BIAS CURRENT - pA VS = 5V VCM = 2.5V TA = 25C 160 INPUT OFFSET VOLTAGE - mV 180 50 VS = 2.7V RL = TA = 25C 40 +OS 30 OS 20 10 0 10 1k 100 CAPACITANCE - pF 10k Figure 9. Small Signal Overshoot vs. Load Capacitance REV. B AD8541/AD8542/AD8544 60 50 40 +OS OS 30 20 10 0 10 1k 100 CAPACITANCE - pF 50 40 +OS 30 1.35V OS 20 10 1k 100 CAPACITANCE - pF 10k Figure 11. Small Signal Overshoot vs. Load Capacitance Figure 12. Small Signal Transient Response VS = 2.7V RL = 2k AV = 1 TA = 25C 500mV 80 45 60 90 40 135 20 180 0 10s 1k Figure 13. Large Signal Transient Response 10M 160 140 100 80 60 50 40 30 20 10 +PSRR 40 20 0 20 40 100 10k 100k FREQUENCY - Hz 1M 10M 5.0 VS = 5V VIN = 4.9V p-p RL = NO LOAD TA = 25C 4.5 4.0 100 SOURCE 10 SINK 1 0.1 3.5 3.0 2.5 2.0 1.5 1.0 0.5 10k 100k 1M FREQUENCY - Hz 10M Figure 16. Common-Mode Rejection Ratio vs. Frequency REV. B 1k Figure 15. Power Supply Rejection Ratio vs. Frequency VS = 5V TA = 25C 0 10 1k PSRR 60 OUTPUT SWING - V p-p 1k 70 VS = 5V TA = 25C 120 10k VS = 5V TA = 25C OUTPUT VOLTAGE - mV COMMON-MODE REJECTION - dB 100k 1M FREQUENCY - Hz Figure 14. Open-Loop Gain and Phase vs. Frequency 90 80 10k PHASE SHIFT - Degrees GAIN - dB VS = 2.7V RL = NO LOAD TA = 25C 1.35V 10s 50mV 0 10 10k Figure 10. Small Signal Overshoot vs. Load Capacitance VS = 2.7V RL = 100k CL = 300pF AV = 1 TA = 25C VS = 2.7V RL = 2k TA = 25C POWER SUPPLY REJECTION RATIO - dB VS = 2.7V RL = 10k TA = 25C SMALL SIGNAL OVERSHOOT - % SMALL SIGNAL OVERSHOOT - % 60 0.01 0.001 0.01 0.1 1 10 LOAD CURRENT - mA 100 Figure 17. Output Voltage to Supply Rail vs. Frequency -7- 0 1k 10k 100k 1M FREQUENCY - Hz Figure 18. Closed Loop Output Voltage Swing vs. Frequency 10M AD8541/AD8542/AD8544 60 OUTPUT SWING - V p-p 4.0 3.5 SMALL SIGNAL OVERSHOOT - % VS = 5V VIN = 4.9V p-p RL = 2k TA = 25C 4.5 3.0 2.5 2.0 1.5 1.0 60 VS = 5V RL = 10k TA = 25C 50 SMALL SIGNAL OVERSHOOT - % 5.0 40 +OS 30 OS 20 10 50 VS = 5V RL = 2k TA = 25C 40 +OS 30 OS 20 10 0.5 0 1k 10k 100k 1M FREQUENCY - Hz 0 10 10M Figure 19. Closed-Loop Output Voltage Swing vs. Frequency 1k 100 CAPACITANCE - pF 0 10 10k Figure 20. Small Signal Overshoot vs. Load Capacitance 100 1k CAPACITANCE - pF 10k Figure 21. Small Signal Overshoot vs. Load Capacitance VS = 5V RL = 100k CL = 300pF AV = 1 TA = 25C VS = 5V RL = TA = 25C 50 40 +OS 30 2.5V VS = 5V RL = 2k AV = 1 TA = 25C 20 10 0 10 10s 50mV 100 1k CAPACITANCE - pF Figure 23. Small Signal Transient Response VS = 5V RL = NO LOAD TA = 25C VS = 5V RL = 10k AV = 1 TA = 25C 45 60 90 40 135 20 180 0 PHASE SHIFT - Degrees VIN 80 VOUT 2.5V 20s 1V 1k 10k 100k 1M FREQUENCY - Hz 10s 1V 10k Figure 22. Small Signal Overshoot vs. Load Capacitance GAIN - dB 2.5V OS 10M Figure 25. Open-Loop Gain & Phase vs. Frequency Figure 26. No Phase Reversal -8- Figure 24. Large Signal Transient Response 60 SUPPLY CURRENT/AMPLIFIER - A SMALL SIGNAL OVERSHOOT - % 60 TA = 25C 50 40 30 20 10 0 0 1 2 3 4 SUPPLY VOLTAGE - V 6 5 Figure 27. Supply Current per Amplifier vs. Supply Voltage REV. B AD8541/AD8542/AD8544 1,000 VS = 2.7V AND 5V AV = 1 800 TA = 25C VS = 5V AV = 1 MARKER SET @ 10kHz MARKER READING: 37.6V/ Hz TA = 25C 900 50 VS = 5V 45 40 VS = 2.7V 35 30 200mV/DIVISION 700 IMPEDANCE - SUPPLY CURRENT/AMPLIFIER - A 55 600 500 400 300 200 25 100 20 55 3515 5 25 45 65 85 105 125 145 TEMPERATURE - C Figure 28. Supply Current per Amplifier vs. Temperature 0 1k 10k 100k 1M FREQUENCY - Hz 10M Figure 29. Closed-Loop Output Impedance vs. Frequency 5 10 15 FREQUENCY - kHz 20 Figure 30. Voltage Noise the circuit to no longer attenuate at the ideal notch frequency. To achieve desired performance, 1% or better component tolerances or special component screens are usually required. One method to desensitize the circuit-to-component mismatch is to increase R2 with respect to R1, which lowers Q. A lower Q increases attenuation over a wider frequency range, but reduces attenuation at the peak notch frequency. NOTES ON THE AD854x AMPLIFIERS The AD8541/AD8542/AD8544 amplifiers are improved performance general-purpose operational amplifiers. Performance has been improved over previous amplifiers in several ways. Lower Supply Current for 1 MHz Gain Bandwidth The AD854x series typically uses 45 microamps of current per amplifier. This is much less than the 200 A to 700 A used in earlier generation parts with similar performance. This makes the AD854x series a good choice for upgrading portable designs for longer battery life. Alternatively, additional functions and performance can be added at the same current drain. 5.0V R 100k R 100k At 5 V single supply, the short circuit current is typically 60 A. Even 1 V from the supply rail, the AD854x amplifiers can provide 30 mA, sourcing or sinking. 8 3 1/2 AD8542 U1 2 C2 53.6F Higher Output Current V OUT 1 4 R/2 50k 2.5VREF Sourcing and sinking is strong at lower voltages, with 15 mA available at 2.7 V, and 18 mA at 3.0 V. For even higher output currents, please see the Analog Devices AD8531/AD8532/AD8534 parts, with output currents to 250 mA. Information on these parts is available from your Analog Devices representative, and data sheets are available at the Analog Devices website at www.analog.com. C 26.7nF C 26.7nF f0 = f0 = R2 2.5k 1/2 AD8542 7 5 U2 6 R1 97.5k 1 2RC [ 1 R1 4 1 R1+R2 2.5VREF ] Figure 31. 60 Hz Twin-T Notch Filter, Q = 10 Better Performance at Lower Voltages The AD854x family parts have been designed to provide better ac performance, at 3.0 V and 2.7 V, than previously available parts. Typical gain-bandwidth product is close to 1 MHz at 2.7 V. Voltage gain at 2.7 V and 3.0 V is typically 500,000. Phase margin is typically over 60C, making the part easy to use. 5.0V R R 3 7 AD8541 2 6 V OUT R/2 2.5VREF The AD8542 has very high open loop gain (especially with supply voltage below 4 V), which makes it useful for active filters of all types. For example, Figure 31 illustrates the AD8542 in the classic Twin-T Notch Filter design. The Twin-T Notch is desired for simplicity, low output impedance and minimal use of op amps. In fact, this notch filter may be designed with only one op amp if Q adjustment is not required. Simply remove U2 as illustrated in Figure 32. However, a major drawback to this circuit topology is ensuring that all the Rs and Cs closely match. The components must closely match or notch frequency offset and drift will cause 4 2C VIN APPLICATIONS Notch Filter REV. B 0 100M C C Figure 32. 60 Hz Twin-T Notch Filter, Q = (Ideal) Figure 33 diagrams another example of the AD8542 in a notch filter circuit. The FNDR notch filter has several unique features as compared to the Twin-T Notch including: less critical matching requirements; Q is directly proportional to a single resistor R1. While matching component values is still important, it is also much easier and/or less expensive to -9- 25 AD8541/AD8542/AD8544 accomplish in the FNDR circuit. For example, the Twin-T Notch uses three capacitors with two unique values, whereas the FNDR circuit uses only two capacitors, which may be of the same value. U3 is simply a buffer that is added to lower the output impedance of the circuit. R1 Q ADJUST 200 9 The AD854x family has very high impedance with input bias current typically around 4 pA. This characteristic allows the AD854x op amps to be used in photodiode applications and other applications that require high input impedance. Note that the AD854x has significant voltage offset, which can be removed by capacitive coupling or software calibration. 1/4 AD8544 8 U3 10 Photodiode Application Figure 35, illustrates a photodiode or current measurement application. The feedback resistor is limited to 10 M to avoid excessive output offset. Also note that a resistor is not needed on the noninverting input to cancel bias current offset, because the bias current related output offset is not significant when compared to the voltage offset contribution. For the best performance follow the standard high impedance layout techniques including: shield circuit, clean circuit board, put a trace connected to the noninverting input around the inverting input, and use separate analog and digital power supplies. V OUT C1 1F R 2.61k 2.5VREF 1/4 AD8544 7 U2 6 3 C2 1F 2 U1 1 11 R 2.61k 5 1/4 AD8544 4 R 2.61k f= R 2.61k 1 2 LC1 2.5VREF L = R2C2 C 100pF 13 12 1/4 AD8544 U4 14 R 10M NC SPARE V+ OR 2.5VREF 2 7 6 3 Figure 33. FNDR 60 Hz Notch Filter with Output Buffer 4 D Comparator Function A comparator function is a common application for a spare op amp in a quad package. Figure 34 illustrates 1/4 of the AD8544 as a comparator in a standard overload detection application. Unlike so many op amps, the AD854x family can double as comparator because this op amp family has rail-to-rail differential input range, rail-to-rail output, and a great speed vs. power ratio. R2 is used to introduce hysteresis. The AD854x when used as comparators have 5 s propagation delay @ 5 V and 5 s overload recovery time. 2.5VREF V OUT AD8541 2.5VREF Figure 35. High Input Impedance Application-Photodiode Amplifier R2 1M R1 1k V OUT VIN 2.5VDC 1/4 AD8544 2.5VREF Figure 34. The AD854x Comparator Application-Overload Detector -10- REV. B AD8541/AD8542/AD8544 * AD8542 SPICE Macro-model Typical Values * 6/98, Ver. 1 * TAM / ADSC * * Copyright 1998 by Analog Devices * * Refer to "README.DOC" file for License Statement. Use of this * model indicates your acceptance of the terms and provisions in * the License Statement. * * Node Assignments * noninverting input * | inverting input * | | positive supply * | | | negative supply * | | | | output * | | | | | * | | | | | .SUBCKT AD8542 1 2 99 50 45 * * INPUT STAGE * M1 4 1 8 8 PIX L=0.6E-6 W=16E-6 M2 6 7 8 8 PIX L=0.6E-6 W=16E-6 M3 11 1 10 10 NIX L=0.6E-6 W=16E-6 M4 12 7 10 10 NIX L=0.6E-6 W=16E-6 RC1 4 50 20E3 RC2 6 50 20E3 RC3 99 11 20E3 RC4 99 12 20E3 C1 4 6 1.5E-12 C2 11 12 1.5E-12 I1 99 8 1E-5 I2 10 50 1E-5 V1 99 9 0.2 V2 13 50 0.2 D1 8 9 DX D2 13 10 DX EOS 7 2 POLY(3) (22,98) (73,98) (81,0) 1E-3 1 1 1 IOS 1 2 2.5E-12 * * CMRR 64dB, ZERO AT 20kHz * ECM1 21 98 POLY(2) (1,98) (2,98) 0 .5 .5 RCM1 21 22 79.6E3 CCM1 21 22 100E-12 RCM2 22 98 50 * * PSRR=90dB, ZERO AT 200Hz * RPS1 70 0 1E6 RPS2 71 0 1E6 CPS1 99 70 1E-5 CPS2 50 71 1E-5 EPSY 98 72 POLY(2) (70,0) (0,71) 0 1 1 RPS3 72 73 1.59E6 CPS3 72 73 500E-12 RPS4 73 98 25 * REV. B * VOLTAGE NOISE REFERENCE OF 35nV/rt(Hz) * VN1 80 0 0 RN1 80 0 16.45E-3 HN 81 0 VN1 35 RN2 81 0 1 * * INTERNAL VOLTAGE REFERENCE * VFIX 90 98 DC 1 S1 90 91 (50,99) VSY_SWITCH VSN1 91 92 DC 0 RSY 92 98 1E3 EREF 98 0 POLY(2) (99,0) (50,0) 0 .5 .5 GSY 99 50 POLY(1) (99,50) 0 3.7E-6 * * ADAPTIVE GAIN STAGE * AT Vsy>+4.2, AVol=45 V/mv * AT Vsy<+3.8, AVol=450 V/mv * G1 98 30 POLY(2) (4,6) (11,12) 0 2.5E-5 2.5E-5 VR1 30 31 DC 0 H1 31 98 POLY(2) VR1 VSN1 0 5.45E6 0 0 49.05E9 CF 45 30 10E-12 D3 30 99 DX D4 50 30 DX * * OUTPUT STAGE * M5 45 46 99 99 POX L=0.6E-6 W=375E-6 M6 45 47 50 50 NOX L=0.6E-6 W=500E-6 EG1 99 46 POLY(1) (98,30) 1.05 1 EG2 47 50 POLY(1) (30,98) 1.04 1 * * MODELS * .MODEL POX PMOS (LEVEL=2,KP=20E-6,VTO=+1,LAMBDA=0.067) .MODEL NOX NMOS (LEVEL=2,KP=20E+6,VTO=1,LAMBDA=0.067) .MODEL PIX PMOS (LEVEL=2,KP=20E-6,VTO=+0.7,LAMBDA=0.01,KF=1E-31) .MODEL NIX NMOS (LEVEL=2,KP=20E+6,VTO=0.7,LAMBDA=0.01,KF=1E-31) .MODEL DX D(IS=1E-14) .MODEL VSY_SWITCH VSWITCH(ROFF=100E3,RON=1,VOFF=+4.2,VON=-3.5) .ENDS AD8542 -11- AD8541/AD8542/AD8544 OUTLINE DIMENSIONS Dimensions shown in inches and (mm). 8-Lead TSSOP (RU-08) 14-Lead TSSOP (RU-14) 0.122 (3.10) 0.114 (2.90) 8 4 1 7 C00935-0-8/00 (rev. B) 1 14 0.177 (4.50) 0.169 (4.30) 0.256 (6.50) 0.246 (6.25) 0.177 (4.50) 0.169 (4.30) 5 0.256 (6.50) 0.246 (6.25) 8 0.201 (5.10) 0.193 (4.90) PIN 1 0.0256 (0.65) BSC 0.006 (0.15) 0.002 (0.05) 0.0433 (1.10) MAX 0.0118 (0.30) SEATING PLANE 0.0075 (0.19) 0.0079 (0.20) 0.0035 (0.090) 8 0 0.028 (0.70) 0.020 (0.50) SEATING PLANE PIN 1 0.0433 (1.10) MAX 0.0256 (0.65) BSC 0.0118 (0.30) 0.0075 (0.19) 0.3444 (8.75) 0.3367 (8.55) 0.1968 (5.00) 0.1890 (4.80) 8 5 1 0.1574 (4.00) 0.1497 (3.80) 0.2440 (6.20) 0.2284 (5.80) 4 14 8 1 7 0.0688 (1.75) 0.0532 (1.35) 0.0500 0.0192 (0.49) SEATING (1.27) PLANE BSC 0.0138 (0.35) 0.0196 (0.50) x 45 0.0099 (0.25) 0.0098 (0.25) 0.0075 (0.19) 8 0 0.0098 (0.25) 0.0040 (0.10) 0.0500 SEATING (1.27) PLANE BSC 0.0500 (1.27) 0.0160 (0.41) 0.0192 (0.49) 0.0138 (0.35) 8-Lead MSOP (RM-8) 0.1220 (3.100) 0.1063 (2.700) 8 0 0.0500 (1.27) 0.0160 (0.41) PIN 1 5 0.193 (4.90) BSC 0.122 (3.10) 0.114 (2.90) 1 0.0709 (1.800) 0.0590 (1.500) 4 PIN 1 0.0256 (0.65) BSC 0.006 (0.15) 0.002 (0.05) 0.0099 (0.25) 0.0075 (0.19) 0.0196 (0.50) x 45 0.0099 (0.25) 5-Lead SOT-23 (RT Suffix) 0.122 (3.10) 0.114 (2.90) 8 0.2440 (6.20) 0.2284 (5.80) 0.0688 (1.75) 0.0532 (1.35) PIN 1 PIN 1 0.0098 (0.25) 0.0040 (0.10) 0.028 (0.70) 0.020 (0.50) 8 0 14-Lead SOIC (SO-14) 8-Lead SOIC (SO-8) 0.1574 (4.00) 0.1497 (3.80) 0.0079 (0.20) 0.0035 (0.090) 3 2 4 5 0.037 (0.95) 0.030 (0.75) 0.043 (1.10) MAX 6 0.016 (0.40) SEATING 0 0.009 (0.23) 0.010 (0.25) PLANE 0.005 (0.13) 1 0.1181 (3.000) 0.0984 (2.500) 0.0374 (0.950) BSC 0.0748 (1.900) REF 0.028 (0.70) 0.016 (0.40) 0.0512 (1.300) 0.0354 (0.900) 0.0590 (0.150) 0.0000 (0.000) 5-Lead SC70 (KS-5) 0.0079 (0.200) 0.0035 (0.090) 0.0571 (1.450) 0.0354 (0.900) 0.0197 (0.500) 0.0118 (0.300) SEATING PLANE 10 0 0.0236 (0.600) 0.0039 (0.100) NOTE: PACKAGE OUTLINE INCLUSIVE AS SOLDER PLATING. 0.026 (0.65) BSC PIN 1 0.053 (1.35) 0.045 (1.15) 3 4 2 1 5 0.094 (2.40) 0.071 (1.80) 0.016 (0.40) 0.004 (0.10) 0.087 (2.20) 0.071 (1.80) 0.039 (1.00) 0.031 (0.80) 0.004 (0.10) 0.000 (0.00) 0.043 (1.10) 0.031 (0.80) 0.012 (0.30) SEATING 0.006 (0.15) PLANE 0.007 (0.18) 0.004 (0.10) 0.012 (0.30) 0.004 (0.10) -12- REV. B PRINTED IN U.S.A. 0.006 (0.15) 0.002 (0.05)