The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. 1.27mm Pitch Two-Piece Connector HIF6 Series Connector in combination with the HIF6 series connection type HIF3B Series (MIL-C-83503) HIF2 Series (Board direct mount type) 1 2 HIF5 Series (Card edge type) Features 1. Product Variation The connection method is available with the board to board type and insulation displacement type. 2. Broad applications HIF2E, HIF3B and HIF5 can be combined one other, because the 1.27mm pitch flat cable is used. RC Series (Micro ribbon connector) FD Series (D sub-ribbon connector) 3. Applicable Cables The applicable cable is a (UL2651) AWG #28 flat cable (7cores: 0.127mm, outer jacket diameter: 0.8 to1.0mm) 4. Mis-insertion Preventive Structure The mis-insertion preventive guide prevents misinsertion. Photo1 (For further information, refer to catalog page B86.) Applications Computers, peripheral and terminal equipment, PPC, various kinds of electronic equipment, Office Automation machines Product Specifications Rating Current rating: 0.5A Operating Temperature Range: -55 to +85 c (Note 1) Storage Temperature Range: -10 to +60c (Note 2) Voltage rating: 125V AC Operating Humidity Range: 40 to 80% Item Operating Humidity Range: 40 to 70% Specification (Note 2) Condition 1.Insulation Resistance 1000M ohms min. 250V DC 2.Withstanding Voltage No flashover or insulation breakdown. 300V AC/1 minute. 3.Contact Resistance 30m ohms max. 0.1A 4.Vibration No electrical discontinuity of 1s or more Frequency: 10 to 55 Hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions. 5.Humidity (Steady state) Insulation resistance: 1000M ohms min. 96 hours at temperature of 40c and humidity of 90% to 95% 6.Temperature Cycle (-65c: 30 minutes15 to 35c: 5 minutes max. 125c: 30 minutes15 to 35c: 5 minutes max.) 5 cycles No damage, cracks, or parts looseness. 7.Durability (Mating/un-mating) Contact resistance: 30m ohms max. 8.Resistance to Soldering heat No deformation of components affecting performance. 500 cycles Solder bath: 260c for 10 seconds Manual soldering: 360c for 5 seconds Note 1: Includes temperature rise caused by current flow. Note 2: The term "storage" refers to products stored for long period of time prior to mounting and use. Operating Temperature Range and Humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation. Note 3: Information contained in this catalog represents general requirements for this Series. Contact us for the drawings and specifications for a specific part number shown. Note 4: Please note that there is a risk of deforming the lock when an excessive load is applied to the inside. B69 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. HIF6 Series1.27mm Pitch Two-Piece Connector Material Parts Material Finish Remarks Insulator PBT Black UL94V-0 Socket Contact Copper alloy Pin header Contact Brass Selective gold plating -------- Ordering Information Socket and Receptacle HIF6 A - * D A - 1.27 DSA L q w e r t y u i q Series Name : HIF6 w Blank : Ribbon cable insulation displacement type A : Without board mounting hole B : With board mounting hole e Number of contacts : 20, 26, 32, 34, 40, 50, 52, 60, 68, 80, 100 r D : Socket or receptacle t A : Selective gold plated y Contact pitch : 1.27mm u Contact type : DS : Right angle type DSA : Straight type R : Ribbon cable ID type i L : Board pre-fixed lock pin Pin Header HIF6 A - * P A - 1.27 DSA L q w e r t y u i q Series Name : HIF6 w Blank : With lock A : Without board mounting hole B : With board mounting hole e Number of contacts : 20, 26, 32, 34, 40, 50, 52, 60, 68, 80, 100 r P : Pin header t A : Selective gold plated y Contact pitch : 1.27mm u Contact style : DS DSA : Right angle type : Straight type i L : Board pre-fixed lock pin B70 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. HIF6 Series1.27mm Pitch Two-Piece Connector BFunction Chart Pin Header Socket or Receptacle Side Right Angle Two pieces of 1.27mm Type with lock pitch cable used a2.54 pitch connector (MIL-C-83503) HIF2B series HIF3B series HIF5 series Straight Type with lock Ribbon cable FD (D sub) connector Ribbon cable RC30 (Micro ribbon) connector Right Angle Type with Right Angle mounting hole Type with mounting hole Straight Type with mounting hole Straight Type with mounting hole Right Angle Type without mounting hole Right Angle Type without mounting hole Straight Type without mounting hole Straight Type without mounting hole B71 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. HIF6 Series1.27mm Pitch Two-Piece Connector Cable ID Connector Unit: mm Unit: mm B72 Part Number CL No. Number of Contacts A B C D HIF6-020D-1.27R 630-0001-4 20 18.55 11.43 13.95 16.35 HIF6-026D-1.27R 630-0002-7 26 22.36 15.24 17.76 20.16 HIF6-032D-1.27R 630-0003-0 32 26.17 19.05 21.57 23.97 HIF6-034D-1.27R 630-0004-2 34 27.44 20.32 22.84 25.24 HIF6-040D-1.27R 630-0005-5 40 31.25 24.13 26.65 29.05 HIF6-050D-1.27R 630-0006-8 50 37.60 30.48 33.00 35.40 HIF6-052D-1.27R 630-0007-0 52 38.87 31.75 34.27 36.67 HIF6-060D-1.27R 630-0008-3 60 43.95 36.83 39.35 41.75 HIF6-068D-1.27R 630-0009-6 68 49.03 41.91 44.43 46.83 HIF6-080D-1.27R 630-0010-5 80 56.65 49.53 52.05 54.45 HIF6-100D-1.27R 630-0011-8 100 69.35 62.23 64.75 67.15 RoHS YES The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. HIF6 Series1.27mm Pitch Two-Piece Connector Pin Header Right Angle Type with lock Unit: mm n= Number of Contacts 2 Note : Size F indicates the state where the lock is open. BPCB mounting pattern Indicate mark position. Mating Side Mating Side Unit: mm Part Number CL No. Number of Contacts A B C D E F HIF6-020PA-1.27DS 630-0051-2 20 30.95 11.43 24.55 18.75 21.59 43.55 HIF6-026PA-1.27DS 630-0052-5 26 34.76 15.24 28.36 22.56 25.40 47.36 HIF6-032PA-1.27DS 630-0053-8 32 38.57 19.05 32.17 26.37 29.21 51.17 HIF6-034PA-1.27DS 630-0054-0 34 39.84 20.32 33.44 27.64 30.48 52.44 HIF6-040PA-1.27DS 630-0055-3 40 43.65 24.13 37.25 31.45 34.29 56.25 HIF6-050PA-1.27DS 630-0056-6 50 50.00 30.48 43.60 37.80 40.64 62.60 HIF6-052PA-1.27DS 630-0057-9 52 51.27 31.75 44.87 39.07 41.91 63.87 HIF6-060PA-1.27DS 630-0058-1 60 56.35 36.83 49.95 44.15 46.99 68.95 HIF6-068PA-1.27DS 630-0059-4 68 61.43 41.91 55.03 49.23 52.07 74.03 HIF6-080PA-1.27DS 630-0060-3 80 69.05 49.53 62.65 56.85 59.69 81.65 HIF6-100PA-1.27DS 630-0061-6 100 81.75 62.23 75.35 69.55 72.39 94.35 RoHS YES B73 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. HIF6 Series1.27mm Pitch Two-Piece Connector Pin Header Straight Type with lock Unit: mm n= Number of Contacts 2 BPCB mounting pattern Guide Key Side (20, 32, 40, 52, 60, 68, 80, 100 contacts) (20, 32, 40, 52, 60, 68, 80, 100 contacts) Guide Key Side Indicate mark position. (26, 34, 50 contacts) Note : Size G indicates a state where the lock is open. (26, 34, 50 contacts) Unit: mm Number of Contacts A B C D E F G HIF6-020PA-1.27DSA(71) 630-0101-9-71 20 30.95 11.43 24.55 18.75 14.95 21.59 43.55 HIF6-026PA-1.27DSA(71) 630-0102-1-71 26 34.76 15.24 28.36 22.56 18.76 25.40 47.36 HIF6-032PA-1.27DSA(71) 630-0103-4-71 32 38.57 19.05 32.17 26.37 22.57 29.21 51.17 HIF6-034PA-1.27DSA(71) 630-0104-7-71 34 39.84 20.32 33.44 27.64 23.84 30.48 52.44 HIF6-040PA-1.27DSA(71) 630-0105-0-71 40 43.65 24.13 37.25 31.45 27.65 34.29 56.25 HIF6-050PA-1.27DSA(71) 630-0106-2-71 50 50.00 30.48 43.60 37.80 34.00 40.64 62.60 HIF6-052PA-1.27DSA(71) 630-0107-5-71 52 51.27 31.75 44.87 39.07 35.27 41.91 63.87 HIF6-060PA-1.27DSA(71) 630-0108-8-71 60 56.35 36.83 49.95 44.15 40.35 46.99 68.95 HIF6-068PA-1.27DSA(71) 630-0109-0-71 68 61.43 41.91 55.03 49.23 45.43 52.07 74.03 HIF6-080PA-1.27DSA(71) 630-0110-0-71 80 69.05 49.53 62.65 56.85 53.05 59.69 81.65 HIF6-100PA-1.27DSA(71) 630-0111-2-71 100 81.75 62.23 75.35 69.55 65.75 72.39 94.35 Part Number B74 CL No. RoHS YES The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. HIF6 Series1.27mm Pitch Two-Piece Connector Receptacle Right Angle Type with Mounting hole Unit: mm n= Number of Contacts 2 BPCB mounting pattern Mating Side BApplication Pattern (20, 32, 40, 52, 60, 68, 80 contacts) Mating Side Mounting hole center line (26, 34, 50 contacts) Unit: mm Number of Contacts A B C D E HIF6B-20DA-1.27DS(71) 631-0051-9-71 20 30.95 20.95 11.43 26.67 18.55 HIF6B-26DA-1.27DS(71) 631-0052-1-71 26 34.76 24.76 15.24 30.48 22.36 HIF6B-32DA-1.27DS(71) 631-0053-4-71 32 38.57 28.57 19.05 34.29 26.17 HIF6B-34DA-1.27DS(71) 631-0054-7-71 34 39.84 29.84 20.32 35.56 27.44 HIF6B-40DA-1.27DS(71) 631-0055-0-71 40 43.65 33.65 24.13 39.37 31.25 HIF6B-50DA-1.27DS(71) 631-0056-2-71 50 50.00 40.00 30.48 45.72 37.60 HIF6B-52DA-1.27DS(71) 631-0057-5-71 52 51.27 41.27 31.75 46.99 38.87 HIF6B-60DA-1.27DS(71) 631-0058-8-71 60 56.35 46.35 36.83 52.07 43.95 HIF6B-68DA-1.27DS(71) 631-0059-0-71 68 61.43 51.43 41.91 57.15 49.03 HIF6B-80DA-1.27DS(71) 631-0060-0-71 80 69.05 59.05 49.53 64.77 56.65 Part Number *Lock pin type is also available. CL No. RoHS YES B75 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. HIF6 Series1.27mm Pitch Two-Piece Connector Receptacle Right Angle Type Without Mounting hole Unit: mm n= Number of Contacts BPCB mounting pattern Mating Side BApplication Pattern (20, 32, 40, 52, 60, 68, 80 contacts) Mating Side (26, 34, 50 contacts) Unit: mm B76 Part Number CL No. Number of Contacts A B C HIF6A-20DA-1.27DS(71) 631-0001-0-71 20 20.95 11.43 18.55 HIF6A-26DA-1.27DS(71) 631-0002-3-71 26 24.76 15.24 22.36 HIF6A-32DA-1.27DS(71) 631-0003-6-71 32 28.57 19.05 26.17 HIF6A-34DA-1.27DS(71) 631-0004-9-71 34 29.84 20.32 27.44 HIF6A-40DA-1.27DS(71) 631-0005-1-71 40 33.65 24.13 31.25 HIF6A-50DA-1.27DS(71) 631-0006-4-71 50 40.00 30.48 37.60 HIF6A-52DA-1.27DS(71) 631-0007-7-71 52 41.27 31.75 38.87 HIF6A-60DA-1.27DS(71) 631-0008-0-71 60 46.35 36.83 43.95 HIF6A-68DA-1.27DS(71) 631-0009-2-71 68 51.43 41.91 49.03 HIF6A-80DA-1.27DS(71) 631-0010-1-71 80 59.05 49.53 56.65 RoHS YES 2 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. HIF6 Series1.27mm Pitch Two-Piece Connector Receptacle Straight Type with Mounting hole Unit: mm n= BPCB mounting pattern Number of Contacts 2 (20, 32, 40, 52, 60, 68, 80, 100 contacts) Guide Key Side (26, 34, 50 contacts) BApplication Pattern (20, 32, 40, 52, 60, 68, 80, 100 contacts) Guide Key Side (26, 34, 50 contacts) Mounting hole center line Unit: mm Number of Contacts A B C D HIF6B-020DA-1.27DSA(71) 631-0151-3-71 20 30.95 26.67 11.43 18.55 HIF6B-026DA-1.27DSA(71) 631-0152-6-71 26 34.76 30.48 15.24 22.36 HIF6B-032DA-1.27DSA(71) 631-0153-9-71 32 38.57 34.29 19.05 26.17 HIF6B-034DA-1.27DSA(71) 631-0154-1-71 34 39.84 35.56 20.32 27.44 HIF6B-040DA-1.27DSA(71) 631-0155-4-71 40 43.65 39.37 24.13 31.25 HIF6B-050DA-1.27DSA(71) 631-0156-7-71 50 50.00 45.72 30.48 37.60 HIF6B-052DA-1.27DSA(71) 631-0157-0-71 52 51.27 46.99 31.75 38.87 HIF6B-060DA-1.27DSA(71) 631-0158-2-71 60 56.35 52.07 36.83 43.95 HIF6B-068DA-1.27DSA(71) 631-0159-5-71 68 61.43 57.15 41.91 49.03 HIF6B-080DA-1.27DSA(71) 631-0160-4-71 80 69.05 64.77 49.53 56.65 HIF6B-100DA-1.27DSA(71) 631-0161-7-71 100 81.75 77.47 62.23 69.35 Part Number *Lock pin type is also available. CL No. RoHS YES B77 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. HIF6 Series1.27mm Pitch Two-Piece Connector Receptacle Straight Type without Mounting hole Unit: mm n= Number of Contacts (20, 32, 40, 52, 60, 68, 80, 100 contacts) BPCB mounting pattern Guide Key Side (26, 34, 50 contacts) BApplication Pattern (20, 32, 40, 52, 60, 68, 80, 100 contacts) Guide Key Side (26, 34, 50 contacts) Unit: mm Part Number B78 Number of Contacts A B C HIF6A-020DA-1.27DSA(71) 631-0101-5-71 CL No. 20 20.95 11.43 18.55 HIF6A-026DA-1.27DSA(71) 631-0102-8-71 26 24.76 15.24 22.36 HIF6A-032DA-1.27DSA(71) 631-0103-0-71 32 28.57 19.05 26.17 HIF6A-034DA-1.27DSA(71) 631-0104-3-71 34 29.84 20.32 27.44 HIF6A-040DA-1.27DSA(71) 631-0105-6-71 40 33.65 24.13 31.25 HIF6A-050DA-1.27DSA(71) 631-0106-9-71 50 40.00 30.48 37.60 HIF6A-052DA-1.27DSA(71) 631-0107-1-71 52 41.27 31.75 38.87 HIF6A-060DA-1.27DSA(71) 631-0108-4-71 60 46.35 36.83 43.95 HIF6A-068DA-1.27DSA(71) 631-0109-7-71 68 51.43 41.91 49.03 HIF6A-080DA-1.27DSA(71) 631-0110-6-71 80 59.05 49.53 56.65 HIF6A-100DA-1.27DSA(71) 631-0111-9-71 100 71.75 62.23 69.35 RoHS YES 2 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. HIF6 Series1.27mm Pitch Two-Piece Connector Pin Header Right Angle Type with Mounting hole Unit: mm n= Number of Contacts 2 BPCB mounting pattern Mating Side BApplication Pattern (20, 32, 40, 52, 60, 68, 80, 100 contacts) Mating Side Mounting hole center line (26, 34, 50 contacts) Unit: mm Number of Contacts A B C D E HIF6B-020PA-1.27DS(71) 631-0251-8-71 20 30.95 20.95 18.75 11.43 26.67 HIF6B-026PA-1.27DS(71) 631-0252-0-71 26 34.76 24.76 22.56 15.24 30.48 HIF6B-032PA-1.27DS(71) 631-0253-3-71 32 38.57 28.57 26.37 19.05 34.29 HIF6B-034PA-1.27DS(71) 631-0254-6-71 34 39.84 29.84 27.64 20.32 35.56 HIF6B-040PA-1.27DS(71) 631-0255-9-71 40 43.65 33.65 31.45 24.13 39.37 HIF6B-050PA-1.27DS(71) 631-0256-1-71 50 50.00 40.00 37.80 30.48 45.72 HIF6B-052PA-1.27DS(71) 631-0257-4-71 52 51.27 41.27 39.07 31.75 46.99 HIF6B-060PA-1.27DS(71) 631-0258-7-71 60 56.35 46.35 44.15 36.83 52.07 HIF6B-068PA-1.27DS(71) 631-0259-0-71 68 61.43 51.43 49.23 41.91 57.15 HIF6B-080PA-1.27DS(71) 631-0260-9-71 80 69.05 59.05 56.85 49.53 64.77 HIF6B-100PA-1.27DS(71) 631-0261-1-71 100 81.75 71.75 69.55 62.23 77.47 Part Number Lock pin type is also available. CL No. RoHS YES B79 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. HIF6 Series1.27mm Pitch Two-Piece Connector Pin Header Right Angle Type Without Mounting hole Unit: mm n= Number of Contacts BPCB mounting pattern Mating Side BApplication Pattern (20, 32, 40, 52, 60, 68, 80, 100 contacts) Mating Side (26, 34, 50 contacts) Unit: mm Part Number B80 Number of Contacts A B C HIF6A-020PA-1.27DS(71) 631-0201-0-71 CL No. 20 20.95 18.75 11.43 HIF6A-026PA-1.27DS(71) 631-0202-2-71 26 24.76 22.56 15.24 HIF6A-032PA-1.27DS(71) 631-0203-5-71 32 28.57 26.37 19.05 HIF6A-034PA-1.27DS(71) 631-0204-8-71 34 29.84 27.64 20.32 HIF6A-040PA-1.27DS(71) 631-0205-0-71 40 33.65 31.45 24.13 HIF6A-050PA-1.27DS(71) 631-0206-3-71 50 40.00 37.80 30.48 HIF6A-052PA-1.27DS(71) 631-0207-6-71 52 41.27 39.07 31.75 HIF6A-060PA-1.27DS(71) 631-0208-9-71 60 46.35 44.15 36.83 HIF6A-068PA-1.27DS(71) 631-0209-1-71 68 51.43 49.23 41.91 HIF6A-080PA-1.27DS(71) 631-0210-0-71 80 59.05 56.85 49.53 HIF6A-100PA-1.27DS(71) 631-0211-3-71 100 71.75 69.55 62.23 RoHS YES 2 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. HIF6 Series1.27mm Pitch Two-Piece Connector Pin Header Straight Type with Mounting hole Unit: mm n= BPCB mounting pattern Number of Contacts 2 (20, 32, 40, 52, 60, 68, 80, 100 contacts) Guide Key Side (26, 34, 50 contacts) BApplication Pattern (20, 32, 40, 52, 60, 68, 80, 100 contacts) Guide Key Side Mounting hole center line (26, 34, 50 contacts) Unit: mm Number of Contacts A B C D E HIF6B-020PA-1.27DSA(71) 631-0351-2-71 20 30.95 26.67 20.95 11.43 18.75 HIF6B-026PA-1.27DSA(71) 631-0352-5-71 26 34.76 30.48 24.76 15.24 22.56 HIF6B-032PA-1.27DSA(71) 631-0353-8-71 32 38.57 34.29 28.57 19.05 26.37 HIF6B-034PA-1.27DSA(71) 631-0354-0-71 34 39.84 35.56 29.84 20.32 27.64 HIF6B-040PA-1.27DSA(71) 631-0355-3-71 40 43.65 39.37 33.65 24.13 31.45 HIF6B-050PA-1.27DSA(71) 631-0356-6-71 50 50.00 45.72 40.00 30.48 37.80 HIF6B-052PA-1.27DSA(71) 631-0357-9-71 52 51.27 46.99 41.27 31.75 39.07 HIF6B-060PA-1.27DSA(71) 631-0358-1-71 60 56.35 52.07 46.35 36.83 44.15 HIF6B-068PA-1.27DSA(71) 631-0359-4-71 68 61.43 57.15 51.43 41.91 49.23 HIF6B-080PA-1.27DSA(71) 631-0360-3-71 80 69.05 64.77 59.05 49.53 56.85 HIF6B-100PA-1.27DSA(71) 631-0361-6-71 100 81.75 77.47 71.75 62.23 69.55 Part Number *Lock pin type is also available. CL No. RoHS YES B81 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. HIF6 Series1.27mm Pitch Two-Piece Connector Pin Header Straight Type Without Mounting hole Unit: mm n= BPCB mounting pattern Number of Contacts (20, 32, 40, 52, 60, 68, 80, 100 contacts) Guide Key Side (26, 34, 50 contacts) BApplication Pattern (20, 32, 40, 52, 60, 68, 80, 100 contacts) Guide Key Side (26, 34, 50 contacts) Unit: mm Part Number B82 Number of Contacts A B C HIF6A-020PA-1.27DSA(71) 631-0301-4-71 CL No. 20 20.95 11.43 18.75 HIF6A-026PA-1.27DSA(71) 631-0302-7-71 26 24.76 15.24 22.56 HIF6A-032PA-1.27DSA(71) 631-0303-0-71 32 28.57 19.05 26.37 HIF6A-034PA-1.27DSA(71) 631-0304-2-71 34 29.84 20.32 27.64 HIF6A-040PA-1.27DSA(71) 631-0305-5-71 40 33.65 24.13 31.45 HIF6A-050PA-1.27DSA(71) 631-0306-8-71 50 40.00 30.48 37.80 HIF6A-052PA-1.27DSA(71) 631-0307-0-71 52 41.27 31.75 39.07 HIF6A-060PA-1.27DSA(71) 631-0308-3-71 60 46.35 36.83 44.15 HIF6A-068PA-1.27DSA(71) 631-0309-6-71 68 51.43 41.91 49.23 HIF6A-080PA-1.27DSA(71) 631-0310-5-71 80 59.05 49.53 56.85 HIF6A-100PA-1.27DSA(71) 631-0311-8-71 100 71.75 62.23 69.55 RoHS YES 2 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. HIF6 Series1.27mm Pitch Two-Piece Connector BConnection Circuit (20, 32, 40, 52, 60, 68, 80, 100 contacts) n= Type A, B Connection of Cable 1 A1 1 B2 bn bn 1 ****** B1 ****** an ****** an 2 Connection of Cable 2 ****** A2 Number of Contacts An a1 Bn b1 Type A, A A1 b1 B1 a1 A2 b2 B2 a2 ****** ****** ****** Connection of Cable 2 ****** Connection of Cable 1 An bn Bn an B83 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. HIF6 Series1.27mm Pitch Two-Piece Connector BConnection Circuit (26, 40, 50 contacts) n= Type A, B Connection of Cable 1 A1 B2 bn 1 ****** 1 bn ****** B1 ****** an an ****** A2 Connection of Cable 2 An a1 Bn b1 Type A, A Connection of Cable 1 B84 Connection of Cable 2 A2 b2 B2 a2 ****** a1 ****** B1 ****** b1 ****** A1 An bn Bn an Number of Contacts 2 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. HIF6 Series1.27mm Pitch Two-Piece Connector BConnection Jig Guide Plate Hi-Flex Connection Press Hi-Flex Connection Press HHP502 CL550 - 0082 - 2 HIF 6 - GPA CL550 - 0165 - 8 *Pressing Block Part Number CL No. Pressing Block A-01 550-0133-1 Cable Cutter Instruction Manual for HIF6 Connection Service Method HIF6 Cable Cutter-FC601 14 Pages CL550 - 0166 - 0 B85 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. HIF6 Series1.27mm Pitch Two-Piece Connector HIF6 Series: Connection Type Coupled Connector HIF3B Series (MIL-C-83503) Compliant with the MIL standard The VA idea is reflected on both pin header and socket. Products with pull-out tab are available. Countermeasures are taken against noises in combination with the applicable cover case. The type aligned in single-row, low profile type, is available for pin header locking system, in addition to standard products. Number of contacts: 6, 10, 14, 16, 20, 26, 30, 34, 40, 50, 60, 64 HIF2 Series (Board direct mount type) 12-row parallel type (HIF2E) Number of contacts: 10, 14, 16, 20, 26, 30, 34, 40, 50, 60 2.54mm grid alignment facilitates to the design pattern. 24-row staggered type (HIF2C) Number of contacts: 10, 14, 16, 20, 26, 30, 34, 40, 50, 60 Mounting height is 4.9mm low profile type. 1 HIF5 Series (Card edge ribbon type) Three types of full hole, semi-hole and no mount area are provided for the unit mount area. Connectors are connected in the bus line system. Cables can be returned within the connector mold width. Number of contacts: 20, 26, 34, 40, 50, 60 RC Series (Micro ribbon connector) Since the cable insulation displacement area is standard pitch 1.27mm, the standard ribbon cable can be easily utilized. Countermeasures are taken against noises in combination with the cover case. Cover case is light weight and compact. Straight and right angle types are installed on the dip side. Number of contacts: 14, 24, 36, 50 FD Series (D sub-ribbon connector) The standard pitch 1.27mm ribbon cable can be insulated and displaced by replacing a jig, in addition to the same pitch 1.38mm as for the D sub connector. The space saving type allows to reduce the thickness on the connection side according to set miniaturization. Connectors can be installed from both front and rear sides of the chassis or panel. Number of contacts: 9, 15, 25, 37 B86 2 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Hirose Electric: HIF6-34D-1.27R HIF6-34D-1.27R(05) HIF6-40D-1.27R HIF6-60D-1.27R HIF6-68D-1.27R(05) HIF6-100D-1.27R HIF6-60PA-1.27DS(75) HIF6-80PA-1.27DS(75) HIF6-GPA HIF6-80PA-1.27DSA (71)