60
Capacitor Array
Capacitor Array (IPC)
AVX capacitor arrays offer designers the opportunity to
lower placement costs, increase assembly line output
through lower component count per board and to reduce
real estate requirements.
Reduced Costs
Placement costs are greatly reduced by effectively placing
one device instead of four or two. This results in increased
throughput and translates into savings on machine time.
Inventory levels are lowered and further savings are made
on solder materials, etc.
Space Saving
Space savings can be quite dramatic when compared to
the use of discrete chip capacitors. As an example, the
0508 4-element array offers a space reduction of >40% vs.
4 x 0402 discrete capacitors and of >70% vs. 4 x 0603
discrete capacitors. (This calculation is dependent on the
spacing of the discrete components.)
Increased Throughput
Assuming that there are 220 passive components placed in a
mobile phone:
A reduction in the passive count to 200 (by replacing
discrete components with arrays) results in an increase in
throughput of approximately 9%.
A reduction of 40 placements increases throughput by 18%.
For high volume users of cap arrays using the very latest
placement equipment capable of placing 10 components per
second, the increase in throughput can be very significant and
can have the overall effect of reducing the number of place-
ment machines required to mount components:
If 120 million 2-element arrays or 40 million 4-element arrays
were placed in a year, the requirement for placement
equipment would be reduced by one machine.
During a 20Hr operational day a machine places 720K
components. Over a working year of 167 days the machine
can place approximately 120 million. If 2-element arrays are
mounted instead of discrete components, then the number
of placements is reduced by a factor of two and in the
scenario where 120 million 2-element arrays are placed there
is a saving of one pick and place machine.
Smaller volume users can also benefit from replacing
discrete components with arrays. The total number of place-
ments is reduced thus creating spare capacity on placement
machines. This in turn generates the opportunity to increase
overall production output without further investment in new
equipment.
W2A (0508) Capacitor Arrays
The 0508 4-element capacitor array gives a PCB space saving of over 40%
vs four 0402 discretes and over 70% vs four 0603 discrete capacitors.
W3A (0612) Capacitor Arrays
The 0612 4-element capacitor array gives a PCB space saving of over 50%
vs four 0603 discretes and over 70% vs four 0805 discrete capacitors.
AREA = 7.0mm2 (0.276 in2) AREA = 3.95mm2 (0.156 in2)
5.0 (0.197)
1.4
(0.055)
1.0
(0.039)
2.1 (0.083)
1.88
(0.074)
4 pcs 0402 Capacitors = 1 pc 0508 Array
AREA = 13.8mm2 (0.543 in2) AREA = 6.4mm2 (0.252 in2)
6.0 (0.236)
2.3
(0.091) 1.5
(0.059)
3.2 (0.126)
2.0
(0.079)
4 pcs 0603 Capacitors = 1 pc 0612 Array
BENEFITS OF USING CAPACITOR
ARRAYS
61
Capacitor Array
Capacitor Array (IPC)
GENERAL DESCRIPTION
AVX is the market leader in the development and manufacture of
capacitor arrays. The smallest array option available from AVX, the
0405 2-element device, has been an enormous success in the
Telecommunications market. The array family of products also
includes the 0612 4-element device as well as 0508 2-element and
4-element series, all of which have received widespread acceptance
in the marketplace.
AVX capacitor arrays are available in X5R, X7R and NP0 (C0G)
ceramic dielectrics to cover a broad range of capacitance values.
Voltage ratings from 6.3 Volts up to 100 Volts are offered. AVX
also now offers a range of automotive capacitor arrays qualified to
AEC-Q200 (see separate table).
Key markets for capacitor arrays are Mobile and Cordless Phones,
Digital Set Top Boxes, Computer Motherboards and Peripherals
as well as Automotive applications, RF Modems, Networking
Products, etc.
HOW TO ORDER
W
Style
W = RoHS
L = SnPb
2
Case
Size
1 = 0405
2 = 0508
3 = 0612
5 = 0306
A
Array
4
Number
of Caps
3
Voltage
6 = 6V
Z = 10V
Y = 16V
3 = 25V
5 = 50V
1 = 100V
C
Dielectric
A = NP0
C = X7R
D = X5R
103
Capacitance
Code
2 Sig Digits +
Number of
Zeros
M
Capacitance
Tolerance
J = ±5%
K = ±10%
M = ±20%
2A
Packaging &
Quantity
Code
2A = 7" Reel
(4000)
4A = 13" Reel
(10000)
2F = 7" Reel
(1000)
A
Failure
Rate
A = Commercial
4 = Automotive
T
Termination
Code
T = Plated Ni
and Sn**
Z = FLEXITERM®**
B = 5% min lead
X = FLEXITERM®with
5% min lead
0405 - 2 Element
0508 - 2 Element
0508 - 4 Element
0612 - 4 Element
AVX Capacitor Array - W2A41A***K
S21 Magnitude
-40
-35
-30
-25
-20
-15
-10
-5
0
0.01 0.1 1 10
Frequency (GHz)
S21 mag. (dB)
5pF 10pF
15pF 22pF
33pF 39pF
68pF
NOTE: Contact factory for availability of Termination and Tolerance Options for Specific Part Numbers.
**RoHS compliant
Not RoHS Compliant
LEAD-FREE COMPATIBLE
COMPONENT
For RoHS compliant products,
please select correct termination style
62
SIZE 0405 0508 0508 0612
# Elements 2 2 4 4
Soldering Reflow Only Reflow/Wave Reflow/Wave Reflow/Wave
Packaging All Paper All Paper Paper/Embossed Paper/Embossed
Length mm 1.00 ± 0.15 1.30 ± 0.15 1.30 ± 0.15 1.60 ± 0.150
(in.) (0.039 ± 0.006) (0.051 ± 0.006) (0.051 ± 0.006) (0.063 ± 0.006)
Width mm 1.37 ± 0.15 2.10 ± 0.15 2.10 ± 0.15 3.20 ± 0.20
(in.) (0.054 ± 0.006) (0.083 ± 0.006) (0.083 ± 0.006) (0.126 ± 0.008)
Max. mm 0.66 0.94 0.94 1.35
Thickness (in.) (0.026) (0.037) (0.037) (0.053)
WVDC
16 25 50 16 25 50 100 16 25 50 100 16 25 50 100
1R0 Cap 1.0
1R2 (pF) 1.2
1R5 1.5
1R8 1.8
2R2 2.2
2R7 2.7
3R3 3.3
3R9 3.9
4R7 4.7
5R6 5.6
6R8 6.8
8R2 8.2
100 10
120 12
150 15
180 18
220 22
270 27
330 33
390 39
470 47
560 56
680 68
820 82
101 100
121 120
151 150
181 180
221 220
271 270
331 330
391 390
471 470
561 560
681 680
821 820
102 1000
122 1200
152 1500
182 1800
222 2200
272 2700
332 3300
392 3900
472 4700
562 5600
682 6800
822 8200
Capacitor Array
Capacitance Range – NP0/C0G
63
SIZE 0306 0405 0508 0508 0612
# Elements 4 2 2 4 4
Soldering Reflow Only Reflow Only Reflow/Wave Reflow/Wave Reflow/Wave
Packaging All Paper All Paper All Paper Paper/Embossed Paper/Embossed
Length mm 1.60 ± 0.15 1.00 ± 0.15 1.30 ± 0.15 1.30 ± 0.15 1.60 ± 0.150
(in.) (0.063 ± 0.006) (0.039 ± 0.006) (0.051 ± 0.006) (0.051 ± 0.006) (0.063 ± 0.006)
Width mm 0.81 ± 0.15 1.37 ± 0.15 2.10 ± 0.15 2.10 ± 0.15 3.20 ± 0.20
(in.) (0.032 ± 0.006) (0.054 ± 0.006) (0.083 ± 0.006) (0.083 ± 0.006) (0.126 ± 0.008)
Max. mm 0.50 0.66 0.94 0.94 1.35
Thickness (in.) (0.020) (0.026) (0.037) (0.037) (0.053)
WVDC 6 10 16 25 6 10
16 25 50 6 10 16 25 50 100 6 10 16 25 50 100 6 10 16 25 50 100
101 Cap 100
121 (pF) 120
151 150
181 180
221 220
271 270
331 330
391 390
471 470
561 560
681 680
821 820
102 1000
122 1200
152 1500
182 1800
222 2200
272 2700
332 3300
392 3900
472 4700
562 5600
682 6800
822 8200
103 Cap 0.010
123 (μF) 0.012
153 0.015
183 0.018
223 0.022
273 0.027
333 0.033
393 0.039
473 0.047
563 0.056
683 0.068
823 0.082
104 0.10
124 0.12
154 0.15
184 0.18
224 0.22
274 0.27
334 0.33
474 0.47
564 0.56
684 0.68
824 0.82
105 1.0
125 1.2
155 1.5
185 1.8
225 2.2
335 3.3
475 4.7
106 10
226 22
476 47
107 100
Capacitor Array
Capacitance Range – X7R/X5R
= Currently available X7R
= Currently available X5R
= Under development X7R, contact factory for advance samples
= Under development X5R, contact factory for advance samples
64
Automotive Capacitor Array (IPC)
0508 - 4 Element
0612 - 4 Element
As the market leader in the development and manufacture of capacitor
arrays AVX is pleased to offer a range of AEC-Q200 qualified arrays to
compliment our product offering to the Automotive industry. Both the
AVX 0612 and 0508 4-element capacitor array styles are qualified to the
AEC-Q200 automotive specifications.
AEC-Q200 is the Automotive Industry qualification standard and a
detailed qualification package is available on request.
All AVX automotive capacitor array production facilities are certified to
ISO/TS 16949:2002.
*Contact factory for availability by part number for K = ±10% and J = ±5% tolerance.
HOW TO ORDER
W
Style
W = RoHS
L = SnPb
3
Case
Size
1 = 0405
2 = 0508
3 = 0612
A
Array
4
Number
of Caps
Y
Voltage
Z = 10V
Y = 16V
3 = 25V
5 = 50V
1 = 100V
C
Dielectric
A = NP0
C = X7R
F = X8R
104
Capacitance
Code (In pF)
Significant
Digits +
Number of
Zeros
e.g. 10μF=106
K
Capacitance
Tolerance
*J = ±5%
*K = ±10%
M = ±20%
4
Failure Rate
4 = Automotive
2A
Packaging
& Quantity
Code
2A = 7" Reel
(4000)
4A = 13" Reel
(10000)
2F =
7" Reel
(1000)
T
Terminations
T = Plated Ni and Sn**
Z = FLEXITERM®**
B = 5% min lead
X = FLEXITERM®with
5% min lead
SIZE 0508 0508 0612 0405
No. of Elements
24 42
WVDC
16 25 50 100 16 25 50 100 10 16 25 50 100 16
101 Cap 100
121 (pF) 120
151 150
181 180
221 220
271 270
331 330
391 390
471 470
561 560
681 680
821 820
102 1000
122 1200
152 1500
182 1800
222 2200
272 2700
332 3300
392 3900
472 4700
562 5600
682 6800
822 8200
103 Cap 0.010
123 (μF) 0.012
153 0.015
183 0.018
223 0.022
273 0.027
333 0.033
393 0.039
473 0.047
563 0.056
683 0.068
823 0.082
104 0.10
124 0.12
154 0.15
224 0.22
SIZE 0405 0508 0508 0612
No. of Elements 2
24 4
WVDC 50
50 16 25 50 100 16 25 50 100
1R0 Cap 1.0
1R2 (pF) 1.2
1R5 1.5
1R8 1.8
2R2 2.2
2R7 2.7
3R3 3.3
3R9 3.9
4R7 4.7
5R6 5.6
6R8 6.8
8R2 8.2
100 10
120 12
150 15
180 18
220 22
270 27
330 33
390 39
470 47
560 56
680 68
820 82
101 100
121 120
151 150
181 180
221 220
271 270
331 330
391 390
471 470
561 560
681 680
821 820
102 1000
122 1200
152 1500
182 1800
222 2200
272 2700
332 3300
392 3900
472 4700
562 5600
682 6800
822 8200
X7R X8RNP0/C0G
= X7R
= Under development
= X8R
= Under development
= NPO/COG
**RoHS compliant
Not RoHS Compliant
LEAD-FREE COMPATIBLE
COMPONENT
For RoHS compliant products,
please select correct termination style.
65
Capacitor Array
PAD LAYOUT DIMENSIONS
LWTBWBLPS
1.00 ± 0.15 1.37 ± 0.15 0.66 MAX 0.36 ± 0.10 0.20 ± 0.10 0.64 REF 0.32 ± 0.10
(0.039 ± 0.006) (0.054 ± 0.006) (0.026 MAX) (0.014 ± 0.004) (0.008 ± 0.004
)
(0.025 REF) (0.013 ± 0.004)
ABCDE
0.46 0.74 1.20 0.30 0.64
(0.018) (0.029) (0.047) (0.012) (0.025)
0405 - 2 Element
LWTBWBLPS
1.30 ± 0.15 2.10 ± 0.15 0.94 MAX 0.43 ± 0.10 0.33 ± 0.08 1.00 REF 0.50 ± 0.10
(0.051 ± 0.006) (0.083 ± 0.006) (0.037 MAX) (0.017 ± 0.004) (0.013 ± 0.003
)
(0.039 REF) (0.020 ± 0.004)
ABCDE
0.68 1.32 2.00 0.46 1.00
(0.027) (0.052) (0.079) (0.018) (0.039)
0508 - 2 Element
LWTBWBLPXS
1.30 ± 0.15 2.10 ± 0.15 0.94 MAX 0.25 ± 0.06 0.20 ± 0.08 0.50 REF 0.75 ± 0.10 0.25 ± 0.10
(0.051 ± 0.006) (0.083 ± 0.006) (0.037 MAX) (0.010 ± 0.003) (0.008 ± 0.003
)
(0.020 REF) (0.030 ± 0.004) (0.010 ± 0.004)
ABCDE
0.56 1.32 1.88 0.30 0.50
(0.022) (0.052) (0.074) (0.012) (0.020)
0508 - 4 Element
LWTBWBLPXS
1.60 ± 0.20 3.20 ± 0.20 1.35 MAX 0.41 ± 0.10 0.18 0.76 REF 1.14 ± 0.10 0.38 ± 0.10
(0.063 ± 0.008) (0.126 ± 0.008) (0.053 MAX) (0.016 ± 0.004) (0.007
)
(0.030 REF) (0.045 ± 0.004) (0.015 ± 0.004)
ABCDE
0.89 1.65 2.54 0.46 0.76
(0.035) (0.065) (0.100) (0.018) (0.030)
0612 - 4 Element
0405 - 2 Element
0508 - 2 Element
0508 - 4 Element
0612 - 4 Element
PART DIMENSIONS
A
B
C
D
E
L
BL
BW C/L
OF CHIP
C
L
T
W
P
SS
0405 - 2 Element PAD LAYOUT
A
B
C
D
E
L
BL
BW C/L
OF CHIP
C
L
T
W
P
SS
0508 - 2 Element PAD LAYOUT 0508 - 4 Element PAD LAYOUT
A
B
C
D
E
L
BL
BW C/L OF CHIP
C
L
T
W
XX
PSS
0612 - 4 Element PAD LAYOUT
A
B
C
D
E
PART & PAD LAYOUT DIMENSIONS millimeters (inches)
+0.25
-0.08
+0.010
-0.003