TECHNICAL DATA SHEET Gort Road Business Park, Ennis, Co. Clare, Ireland. Tel: +353 (0) 65 6840044, Fax: +353 (0) 65 6822298 6 Lake Street, Lawrence, MA 01841 Tel: 1-800-446-1158 / (978) 794-1666, Fax: (978) 6890803 Website: http://www.microsemi.com SURFACE MOUNT 1500 Watt Transient Voltage Suppressor DEVICES - High Reliability controlled devices - Unidirectional (A) and Bidirectional (CA) construction - Available in both J-bend and Gull-wing terminations - Selections for 5.0 to 170 V standoff voltages (VWM) MSMCJ5.0A thru MSMCJ170CA, e3 and MSMCG5.0A thru MSMCG170CA, e3 LEVELS M, MA, MX, MXL FEATURES High reliability controlled devices with fabrication and assembly lot traceability 100 % surge tested devices Optional upscreening available by replacing the M prefix with MA, MX or MXL prefixes. These prefixes specify various screening and conformance inspection options based on MIL-PRF-19500. Refer to MicroNote 129 for more details on the screening options. Axial-lead equivalent packages for thru-hole mounting available as 1.5KE6.8A to 1.5KE200CA or 1N6267 thru 1N6303A and 1N5908 (consult factory for other surface mount options). Moisture classification is Level 1 with no dry pack required per IPC/JEDEC J-STD-020B RoHS compliant devices available by adding an "e3" suffix 3 lot norm screening performed on Standby Current ID Refer to table below for dimensions APPLICATIONS / BENEFITS Protection from switching transients and induced RF Protection from ESD and EFT per IEC 61000-4-2 and IEC 61000-4-4 Secondary lightening protection per IEC 61000-4-5 with 42 Ohms source impedance: o Class 1: MSMC5.0A to MSMC170CA o Class 2: MSMC5.0A to MSMC150CA o Class 3: MSMC5.0A to MSMC75CA o Class 4: MSMC5.0A to MSMC36CA Secondary lightening protection per IEC 61000-4-5 with 12 Ohms source impedance: o Class 1: MSMC5.0A to MSMC90CA o Class 2: MSMC5.0A to MSMC45CA o Class 3: MSMC5.0A to MSMC24CA o Class 4: MSMC5.0A to MSMC11CA Secondary lightening protection per IEC 61000-4-5 with 2 Ohms source impedance: o Class 2: MSMC5.0A to MSMC22CA o Class 3: MSMC5.0A to MSMC10CA MAXIMUM RATINGS Peak Pulse Power dissipation at 25 C: 1500 watts at 10/1000 s (also see Figures 1,2, and 3) with impulse repetition rate (duty factor) of 0.01 % or less tclamping (0 volts to VBR min.): < 100 ps theoretical for unidirectional and <5 ns for bidirectional Operating and Storage temperature: -65 C to +150 C Thermal resistance: 20 C/W junction to lead, or 80 C/W junction to ambient when mounted on FR4 PC board (1oz Cu) with recommended footprint (see page 2) Steady-State Power dissipation: 6 watts at TL = 30 C, or 1.56 watts at TA = 25 C when mounted on FR4 PC board with recommended footprint (see page 2) Forward Surge: 200 Amps peak impulse of 8.3 ms half-sine wave at 25 C (unidirectional only) Solder temperatures: 260 C for 10 s (maximum) RF01001 Rev B, Sept 2011 High Reliability Product Group Page 1 of 4 TECHNICAL DATA SHEET Gort Road Business Park, Ennis, Co. Clare, Ireland. Tel: +353 (0) 65 6840044, Fax: +353 (0) 65 6822298 6 Lake Street, Lawrence, MA 01841 Tel: 1-800-446-1158 / (978) 794-1666, Fax: (978) 6890803 Website: http://www.microsemi.com ___________________________________________________________________________________________________________________________________ MECHANICAL AND PACKAGING Void-free transfer molded thermosetting epoxy body meeting UL94V-0 Gull-wing or J-bend tin-lead (90 % Sn, 10 % Pb) or RoHS (100 % Sn) compliant annealed matte-tin plating solderable per MIL-STD-750, method 2026 Cathode indicated by band. No cathode band on bi-directional devices. Part number marked on package Available in bulk or custom tape-and-reel packaging TAPE-AND-REEL option available with up to 750 devices on 7 inch reel or up to 2500 devices on 13 inch reel per EIA-481-1-A with 12 mm tape. Add "TR" suffix to part number. Weight: 0.25 grams (approximately) PACKAGE DIMENSIONS SMCJ (DO-214AB) SMCG (DO-215AB) MIN MAX A .115 .121 MIN MAX 2.92 3.07 DIMENSIONS IN INCHES B C D E F .260 .220 .305 .077 .380 .280 .245 .320 .110 .400 DIMENSIONS IN MILLIMETERS 6.60 5.59 7.75 1.95 9.65 7.11 6.22 8.13 2.80 10.16 K .025 .040 L .030 .060 0.635 1.016 .760 1.520 Typical Standoff Height: 0.004" - 0.008" (0.1mm - 0.2mm) PAD LAYOUT SMCJ (DO-214AB) A B C INCHES 0.390 0.110 0.150 mm 9.90 2.79 3.81 SMCG (DO-215AB) A B C INCHES 0.510 0.110 0.150 mm 12.95 2.79 3.81 SYMBOLS & DEFINITIONS Symbol VWM PPP VBR ID Definition Symbol Working Peak (Standoff) Voltage Peak Pulse Power Breakdown Voltage Standby Current RF01001 Rev B, Sept 2011 IPP VC IBR High Reliability Product Group Definition Peak Pulse Current Clamping Voltage Breakdown Current for VBR Page 2 of 4 TECHNICAL DATA SHEET Gort Road Business Park, Ennis, Co. Clare, Ireland. Tel: +353 (0) 65 6840044, Fax: +353 (0) 65 6822298 6 Lake Street, Lawrence, MA 01841 Tel: 1-800-446-1158 / (978) 794-1666, Fax: (978) 6890803 Website: http://www.microsemi.com ___________________________________________________________________________________________________________________________________ ELECTRICAL CHARACTERISTICS @ 25oC MICROSEMI PART NUMBER GULL-WING MSMCG5.0A MSMCG6.0A MSMCG6.5A MSMCG7.0A MSMCG7.5A MSMCG8.0A MSMCG8.5A MSMCG9.0A MSMCG10A MSMCG11A MSMCG12A MSMCG13A MSMCG14A MSMCG15A MSMCG16A MSMCG17A MSMCG18A MSMCG20A MSMCG22A MSMCG24A MSMCG26A MSMCG28A MSMCG30A MSMCG33A MSMCG36A MSMCG40A MSMCG43A MSMCG45A MSMCG48A MSMCG51A MSMCG54A MSMCG58A MSMCG60A MSMCG64A MSMCG70A MSMCG75A MSMCG78A MSMCG85A MSMCG90A MSMCG100A MSMCG110A MSMCG120A MSMCG130A MSMCG150A MSMCG160A MSMCG170A J- BEND MSMCJ5.0A MSMCJ6.0A MSMCJ6.5A MSMCJ7.0A MSMCJ7.5A MSMCJ8.0A MSMCJ8.5A MSMCJ9.0A MSMCJ10A MSMCJ11A MSMCJ12A MSMCJ13A MSMCJ14A MSMCJ15A MSMCJ16A MSMCJ17A MSMCJ18A MSMCJ20A MSMCJ22A MSMCJ24A MSMCJ26A MSMCJ28A MSMCJ30A MSMCJ33A MSMCJ36A MSMCJ40A MSMCJ43A MSMCJ45A MSMCJ48A MSMCJ51A MSMCJ54A MSMCJ58A MSMCJ60A MSMCJ64A MSMCJ70A MSMCJ75A MSMCJ78A MSMCJ85A MSMCJ90A MSMCJ100A MSMCJ110A MSMCJ120A MSMCJ130A MSMCJ150A MSMCJ160A MSMCJ170A REVERSE STAND-OFF VOLTAGE VWM V 5.0 6.0 6.5 7.0 7.5 8.0 8.5 9.0 10 11 12 13 14 15 16 17 18 20 22 24 26 28 30 33 36 40 43 45 48 51 54 58 60 64 70 75 78 85 90 100 110 120 130 150 160 170 BREAKDOWN VOLTAGE VBR @ IBR V 6.40 - 7.00 6.67 - 7.37 7.22 - 7.98 7.78 - 8.60 8.33 - 9.21 8.89 - 9.83 9.44 - 10.4 10.0 - 11.1 11.1 - 12.3 12.2 - 13.5 13.3 - 14.7 14.4 - 15.9 15.6 - 17.2 16.7 - 18.5 17.8 - 19.7 18.9 - 20.9 20.0 - 22.1 22.2 - 24.5 24.4 - 26.9 26.7 - 29.5 28.9 - 31.9 31.1 - 34.4 33.3 - 36.8 36.7 - 40.6 40.0 - 44.2 44.4 - 49.1 47.8 - 52.8 50.0 - 55.3 53.3 - 58.9 56.7 - 62.7 60.0 - 66.3 64.4 - 71.2 66.7 - 73.7 71.1 - 78.6 77.8 - 86.0 83.3 - 92.1 86.7 - 95.8 94.4 - 104.0 100 - 111 111 - 123 122 - 135 133 - 147 144 - 159 167 - 185 178 - 197 189 - 209 mA 10 10 10 10 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 MAXIMUM CLAMPING VOLTAGE VC @ IPP PEAK PULSE CURRENT (see Fig. 2) IPP MAXIMUM STANDBY CURRENT ID @ VWM V 9.2 10.3 11.2 12.0 12.9 13.6 14.4 15.4 17.0 18.2 19.9 21.5 23.2 24.4 26.0 27.6 29.2 32.4 35.5 38.9 42.1 45.4 48.4 53.3 58.1 64.5 69.4 72.7 77.4 82.4 87.1 93.6 96.8 103.0 113 121 126 137 146 162 177 193 209 243 259 275 A 163.0 145.6 133.9 125.0 116.3 110.3 104.2 97.4 88.2 82.4 75.3 69.7 64.7 61.5 57.7 53.3 51.4 46.3 42.2 38.6 35.6 33.0 31.0 28.1 25.8 23.2 21.6 20.6 19.4 18.2 17.2 16.0 15.5 14.6 13.3 12.4 11.4 10.4 10.3 9.3 8.4 7.8 7.2 6.2 5.8 5.5 A 1000 1000 500 200 100 50 20 10 5 5 5 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 NOTE 1: For Bidirectional device types indicate CA suffix after the part number. (i.e. MSMCJ170CA). Bidirectional capacitance is half that shown in Figure 4 at zero volts. NOTE 2: Microsemi Corp's MSMC series (1500 W) surface mountable packages are designed specifically for transient voltage suppression. The wide leads assure a large surface contact for good heat dissipation, and a low resistance path for surge current flow to ground. These high speed transient voltage suppressors can be used to effectively protect sensitive components such as integrated circuits and MOS device. RF01001 Rev B, Sept 2011 High Reliability Product Group Page 3 of 4 TECHNICAL DATA SHEET Gort Road Business Park, Ennis, Co. Clare, Ireland. Tel: +353 (0) 65 6840044, Fax: +353 (0) 65 6822298 6 Lake Street, Lawrence, MA 01841 Tel: 1-800-446-1158 / (978) 794-1666, Fax: (978) 6890803 Website: http://www.microsemi.com ___________________________________________________________________________________________________________________________________ GRAPHS (Waveform - See Figure 2) Non-repetitive 10 1.0 0 1s 10s 100s 1ms 10 ms tp - Pulse Time - sec Test waveform parameters tr = 10s, tp = 1000s FIGURE 2 - Pulse Waveform FIGURE 1 - Peak Pulse Power vs. Pulse Time Capacitance in pF Peak Pulse Power (PPP) or continuous o Power in Percent of 25 C Rating (PPP) - Peak Pulse Power - kW 100 o Breakdown Voltage in Volts TL Lead Temperature C FIGURE 3 - Derating Curve RF01001 Rev B, Sept 2011 FIGURE 4 - Typical Capacitance vs. Breakdown High Reliability Product Group Page 4 of 4