1996 Nov 15 1
Philips Components
Chip resistors Packaging
PACKAGING
Tape and reel specifications
All tape and reel specifications are in accordance with the
second edition of
“IEC 286-3”
. Basic dimensions are given
in Figs 1, 2 and 4, and Tables 1, 2 and 4.
Peel-off force
Peel-off forces of both cardboard and blister tapes are in
accordance with
“IEC 286-3”
; that is, 0.1 N to 0.7 N at a
peel-off speed of 120 mm/minute and 0.2 N to 1.0 N at a
peel-off speed of 300 mm/minute. For both speeds, the
peel-off angle should be between 165° and 180°.
Cardboard tape
Table 1 Dimensions of cardboard tape for relevant chip size; see Fig.1
SYMBOL
PRODUCT SIZE CODE
UNIT0402 0603 0805 1206
SIZE TOL. SIZE TOL. SIZE TOL. SIZE TOL.
A00.70 ±0.05 1.0 +0.2/−0 1.5 +0.2/−0 1.85 +0.2/−0mm
B
01.20 ±0.05 1.8 +0.2/−0 2.25 +0.2/−0 3.45 +0.2/−0mm
W8±0.2 8 ±0.3 8 ±0.3 8 ±0.3 mm
E 1.75 ±0.1 1.75 ±0.1 1.75 ±0.1 1.75 ±0.1 mm
F 3.5 ±0.05 3.5 ±0.05 3.5 ±0.05 3.5 ±0.05 mm
D01.5 +0.1/−0 1.5 +0.1/−0 1.5 +0.1/−0 1.5 +0.1/−0mm
P
04±0.1 4 ±0.1 4 ±0.1 4 ±0.1 mm
P12±0.1 4 ±0.1 4 ±0.1 4 ±0.1 mm
P22 or 0 ±0.05 2 ±0.05 2 ±0.05 2 ±0.05 mm
handbook, full pagewidth
FW
P0
P2
D0
B0
A0P1
E
MBD123
Fig.1 Cardboard tape.
Cumulative tolerance over 10 holes: ±0.2 mm.
Bottom fixing tape thickness: 50 ±10 µm.
Top fixing tape thickness: 50 ±10 µm.
For dimensions see Table 1.
Carrier tape thickness:
0.6 ±0.05 mm (0402, 0603)
0.75 ±0.05 mm (1206; 0805).
1996 Nov 15 2
Philips Components
Chip resistors Packaging
Embossed carrier tape
ENVIRONMENTAL CONSIDERATIONS
•Cover tape, carrier tape and reel do not contain
environmentally-harmful PVC materials.
•Tape and reel are antistatic.
•Because the carrier tape is made of polycarbonate, a
homogeneous material (mono-plastic), it is ideally suited
for recycling.
•Compared to other PVC-free materials polycarbonate
shows excellent stiffness and very little deformation with
temperature.
Table 2 Dimensions of embossed carrier tape for relevant chip size; see Fig.2
Notes
1. Possible product displacement in pocket.
2. P0 pitch tolerance over any 10 pitches is ±0.2 mm.
SYMBOL PRODUCT SIZE CODE TOLERANCE UNIT
0805 1206 1218
A0 nominal clearance; note 1 0.30 −mm
B0 nominal clearance; note 1 0.20 −mm
K0 minimum clearance; note 1 0.10 −mm
W 8.1 8.1 12 ±0.2 mm
E 1.75 1.75 1.75 ±0.1 mm
F 3.5 3.5 5.5 ±0.05 mm
D01.5 1.5 1.5 +0.1/−0.0 mm
D1≥1≥1≥1.5 +0.1/−0.0 mm
P0; note 2 4 4 4 ±0.1 mm
P1448±0.1 mm
P2222±0.05 mm
handbook, full pagewidth
MBG516
E
FW
P2
P0
D0
B0
A0D1
P1
direction of unreeling
K
T
0
cover tape
T1
T2
Cumulative pitch error: 0.2 mm over 10 pitches.
Cumulative tolerance over 10 holes: ±0.2 mm.
K0: chosen so that the orientation of the component cannot change.
For W = 8 mm: T2= 2.5 mm max.
For W = 12 mm: T2= 4.5 mm max.
For dimensions see Table 2. Fig.2 Embossed carrier tape.
1996 Nov 15 3
Philips Components
Chip resistors Packaging
Leader/trailer tape specification
Table 3 Leader/trailer tape data
DESCRIPTION VALUE
Minimum length of empty compartments at leader end ≥400 mm of which a minimum 240 mm of empty
compartments are covered with cover tape and 120 ±40 mm
cover tape only.
Minimum length of empty compartments at trailer end 208 mm or 260 mm; if the length is 260 mm an extra product
is placed at 208 mm to mark this position
Fig.3 Leader/trailer tape.
MEA529 - 2
empty compartments
with cover tape
cover tape only
120 40 mm
leader 400 mm
trailer (max. 260 mm)
trailer end
leader end
1996 Nov 15 4
Philips Components
Chip resistors Packaging
REEL SPECIFICATIONS
Table 4 Reel dimensions; see Fig.4
PRODUCT SIZE
CODE UNITS
PER REEL TAPE WIDTH
(mm) A
(mm) N
(mm) W1
(mm)
W2
MAX.
(mm)
0402 10000
8
180
62 ±1.5 8.4 +1.5/−0.0 14.4
1206; 0603; 0805 20000 330
10000 250
5000 180
1218 1000 12 180 12.4 +2/−0.0 18.4
5000 286
handbook, full pagewidth
12.75 0.15
0
20.5 NA
W
1
W
2
MSA284
Fig.4 Reel.
Dimensions in mm.
For reel dimensions see Table 4.
1996 Nov 15 5
Philips Components
Chip resistors Packaging
BULK CASE SPECIFICATION
Features and benefits:
•Reduced costs
– Storage
– Transport
– Machine handling
– Packaging.
Table 5 Bulk case dimensions; see Fig.5
Table 6 Product size versus packaged quantity
LENGTH
(mm) WIDTH
(mm) THICKNESS
(mm)
110 35 12
PRODUCT SIZE CODE UNITS PER CASE
0402 100000
0603 25000
0805 10000
Fig.5 Bulk case outline.
handbook, 4 columns
slider shutter
coupled
portion
MGB377
For dimensions see Table 5.
