T1/E1/CEPT/ISDN-PRI TRANSFORMERS
Quad Port T1/E1 with 8 Transformers, 1500Vrms
Models matched to leading quad and dual
T1/E1/CEPT/ISDN-PRI transceivers
Crosstalk: -65dB or better
UL1950 recognized (some parts pending approval)
RoHS compliant versions available upon request
Mechanical
Part Turns Ratio
A,B
OCL @ 25°C L
L
C
W/W
Package/
Number
G
(Pri:Sec ±2%) (mH MIN)
F
(µH MAX) (pF MAX) Schematic
E
Primary Pins
STD Temp. EXT Temp. Transmit Receive Transmit Receive Transmit Receive Transmit Receive Transmit Receive
T1063 T1103 1:1.36 1:1.36CT 1.2 1.2 .6 .6 35 35 TOU/1 1-2, 6-7, 11-12, 16-17 38-36, 33-31, 28-26, 23-21
T1064 T1104 1:1.14 1:1.14CT 1.2 1.2 .6 .6 35 35 TOU/1 1-2, 6-7, 11-12, 16-17 38-36, 33-31, 28-26, 23-21
T1065 T1105 1:2CT 1:2CT 1.2 1.2 .8 .8 35 35 TOU/3 4-5, 9-10, 14-15, 19-20 24-25, 29-30, 34-35, 39-40
T1066 T1106 1:2 1:2CT 1.2 1.2 .6 .6 35 35 TOU/4 1-2, 9-10, 11-12, 19-20 23-25, 26-28, 33-35, 36-38
T1067 T1107 1:1.36CT 1:2CT 1.2 1.2 .6 .6 35 35 TOU/3 24-25, 29-30, 34-35, 39-40 4-5, 9-10, 14-15, 19-20
T1068 T1108 1:2CT 1:1CT 1.2 1.2 .6 .6 35 35 TOU/2 1-2, 6-7, 11-12, 16-17 21-22, 26-27, 31-32, 36-37
T1069 T1109 1CT:1.41 1CT:1.41 1.2 1.2 .6 .6 35 35 TOU/3 1-3, 6-8, 11-13, 16-18 21-23, 26-28, 31-33, 36-38
T1070 T1110 1:1.15 1:2CT 1.2 1.2 .6 .6 35 35 TOU/1 1-2, 6-7, 11-12, 16-17 21-23, 26-28, 31-33, 36-38
T1071
D
T1111
D
1:1/1.26 1:2CT 1.2 1.2 .6 .6 35 35 TOU/2 1-2, 6-7, 11-12, 16-17 21-22, 26-27, 31-32, 36-37
T1072 T1112 1:1.15 1:1.15 1.2 1.2 .6 .6 35 35 TOU/5 1-3, 6-8, 11-13, 16-18 4-5, 9-10, 14-15, 19-20
T1073 T1113 1:2 1:2 1.2 1.2 .6 .6 35 35 TOU/5 1-3, 6-8, 11-13, 16-18 4-5, 9-10, 14-15, 19-20
T1078 — 1:1.08 1.08CT:1 1.2 1.2 .4 .5 35 35 TOU/1 1-2, 6-7, 11-12, 16-17 38-36, 33-31, 28-26, 23-21
T1124 T1114 1:2CT 1CT:2 1.2 1.2 .6 .6 35 35 TOU/3 4-5, 9-10, 14-15, 19-20 1-3, 6-8, 11-13, 16-18
T1125 — 1:1.70 1:1.36CT 1.2 1.2 .8 .6 35 35 TOU/1 1-2, 6-7, 11-12, 16-17 21-23, 26-28, 31-33, 36-38
T1129 — 1:1.36CT 1:1CT 1.2 1.2 .6 .6 35 35 TOU/3 24-25, 29-30, 34-35, 39-40 4-5, 9-10, 14-15, 19-20
T1142 T1231 1:2.4 1:1 1.0 1.0 .5 .5 35 35 TOU/6 1-2, 8-9, 11-12, 18-19 24-25, 27-28, 34-35, 37-38
— TX1268 1:2.8 1:1 1.0 1.0 .5 .5 35 35 TOU/6 1-2, 8-9, 11-12, 18-19 24-25, 27-28, 34-35, 37-38
— T1226 1:1.5 1.41:1 1.0 1.0 .5 .5 35 35 TOU/6 1-2, 8-9, 11-12, 18-19 24-25, 27-28, 34-35, 37-38
T1145
D
—1:2/2.4 1:0.79/1 1.0 1.0 1.0 1.0 35 35 TOU/7 1-2, 9-10, 11-12, 19-20 37-36, 35-34, 27-26, 25-24
T1180 — 1:2.42 1:2.42 1.2 1.2 .6 .6 35 35 TOU/5 1-3, 6-8, 11-13, 16-18 4-5, 9-10, 14-15, 19-20
T1181 — 1:2.1CT 1:2.1CT 1.2 .6 .6 .6 35 35 TOU/2 1-2, 6-7, 11-12, 16-17 21-22, 26-27, 31-32, 36-37
T1182 — 1:2.45CT 1:2.45CT 1.2 .6 .6 .6 35 35 TOU/2 1-2, 6-7, 11-12, 16-17 21-22, 26-27, 31-33, 36-37
— TX1262 1:2 1:2 1.2 1.2 .7 .7 35 35 TOU/6 1-2, 6-7, 11-12, 16-17 3-4, 8-9, 13-14, 18-19
— TX1264 1:2CT 1CT:1 1.2 1.2 .6 .6 35 35 TOU/3 4-5, 9-10, 14-15, 19-20 1-3, 6-8, 11-13, 16-18
— TX1266 1:2 1:1 1.2 1.2 .6 .6 35 35 TOU/5 1-3, 6-8, 11-13, 16-18 4-5, 9-10, 14-15, 19-20
— TX1292 1:1.36 1:1 1.2 1.2 .6 .6 40 40 TOU/5 1-3, 6-8, 11-13, 16-18 4-5, 9-10, 14-15, 19-20
— TX1294 1:1CT 1:1CT 1.2 1.2 .6 .6 35 35 TOU/3 4-5, 9-10, 1 4-15, 19-20 24-25, 29-30, 34-35, 39-40
— TX1295 1:1.26CT 1:1.26CT 1.2 1.2 .6 .6 35 35 TOU/3 4-5, 9-10, 1 4-15, 19-20 24-25, 29-30, 34-35, 39-40
— TX1298 1:1 1:1 1.2 1.2 .7 .7 35 35 TOU/5 1-3, 6-8, 11-13, 16-18 4-5, 9-10, 14-15, 19-20
Note:
RoHS-6 compliant parts can be ordered by adding an “NL” suffix to the part number (i.e. T1063 becomes T1063NL).
Electrical Specifications @ 25°C
T1XXX
DATE CODE
COUNTRY OF ORIGIN
1.125 MAX
28,58
.640 MAX
16,26
.950
24,13
40X .018
0,46 19X .050
1,27 SUGGESTED PAD LAYOUT
40X .090
2,29
40X .030
0,77
.480
12,19
.050
1,27
19X .050 = .950
1,27 24,13
.004/0,10
40 Surfaces .010
0,25
0° – 8°
.485
12,32
40X .045
1,14
.230 MAX
5,84
TOU
Weight . . . . . . . . . . . . . .4.0 grams
Tape & Reel . . . . . . . . . . . .250/reel
Tube . . . . . . . . . . . . . . . . . .15/tube
Dimensions: Inches
mm
Unless otherwise specified, all tolerances are ± .010
0,25
USA 858 674 8100
••
Germany 49 7032 7806
••
Singapore 65 6287 8998
••
Shanghai
86 21 54643211 / 2
••
China 86 769 85538070
••
Taiwan 886 3 4641811
www.pulseeng.com
1T622.H (6/06)
T1/E1/CEPT/ISDN-PRI TRANSFORMERS
Quad Port T1/E1 with 8 Transformers, 1500Vrms
Schematics
Transformer Selection Guide
IC Mfr. IC Part Number Comments Octal SMT
STD temp EXT temp
Mindspeed BT8510 T1/E1 T1071 T1111
(Conexant) BT8510 T1/E1 T1071 T1111
CN8380 T1124 T1114
BT8370/5/6 Better Rl T1067 T1107
BT8370/5/6 Low Power T1070 T1110
Cirrus Logic 61318 120 E1 T1068 T1108
(Crystal) 61577 T1 & E1 T1065 T1105
61304A/5A/535A/574A,/75 T1 T1070 T1110
61304A/5A/535A/574A,/75 75 E1 T1068 T1108
61304A/5A/535A/574A,/75 120 E1 T1071 T1111
61582, 61583 T1064 T1104
61310, 61581 T1068 T1108
61881 T1070 T1110
61584/84A IQ3 T1065 T1105
61584/82/83/A IQ5 T1064 T1104
Maxim DS2196 T1068 T1108
(Dallas) DS2151/2152/2153/2154 T1070 T1110
DS2151/2152/2153/2154 T1067 T1107
DS2148/Q48 3V T1068 T1108
DS2148/Q48 5V T1067 T1107
DS21352/Q352,DS21354/Q354 T1068 T1108
DS21552/Q552,DS21554/Q554 T1070 T1110
DS21552/Q552,DS21554/Q554 T1067 T1107
Exar T5683A, 59L91 T1065 T1105
T5894,T5897,T5997 T1065 T1105
T5791/93/94/95 T1071 T1111
81L27,82L24,82D20 T1067 T1107
83L30/34/38 T1065 T1105
T5684,T7288,82D20 T1067 T1107
Infineon PEB 2254/55 E1/T1 & J1 T1069 T1109
Technologies PEB 2254/55 E1/T1 & J1 T1069 T1109
(Siemens) PEB 22504 3.3V T1142 T1231
PEB 22504 5V T1226 T1226
PEB22554 3.3V T1142 T1231
PEB2256 3.3 V E1/T1/J1 T1142 T1231
Intel LXT 300/301 T1065 T1105
(Level One) LXT 304/305/307 T1,E1 T1065 T1105
LXT 304/305/307 T1 T1070 T1110
LXT 304/305/307 75E1,120E1 T1071 T1111
LXT 310/317/318 T1068 T1108
LXT 331 T1,E1 T1068 T1108
LXT 331, LXT 332 T1065 T1105
LXT 331, LXT 332 T1070 T1110
LXT 334, LXT 335 T1/E1 T1065 T1105
LXT 334, LXT 335 120/75 E1 T1067 T1107
LXT 334, LXT 335 75 E1 T1071 T1111
LXT 336 T1065 T1105
LXT 350, LXT 351, LXT 359 T1,E1 T1068 T1108
LXT 350, LXT 351 T1070 T1110
LXT 360/361/362/363 T1,E1 T1068 T1108
LXT 360/361/362/363 T1070 T1110
LXT 380/381/384/386/388 T1/E1 T1068 T1108
LXT 380/381/384/386/388 T1/E1 T1124 T1114
LXT 3104, LXT 3108 T1068 T1108
Lucent T7288, T290A CEPT T1067 T1107
Technologies T7289A DS1 T1070 T1110
T7688, T7690, T7698 CEPT T1063 T1103
T7689, T7690, T7698 DS1 T1064 T1104
T7693,T7697 CEPT T1180
TLIU04C1 DS1 T1064 T1104
TLIU04C1 CEPT T1063 T1103
Zarlink MT9071, MT9076 T1180
(Mitel) MT9076, MT9075 T1142 T1231
MT9074, MT9075 T1068 T1108
PMC-Sierra PM4341/6341/4314 T1067 T1107
PM4318 T1065 T1105
PM4351/4354 COMET T1180 TX1299
40
39
1
2
38
36
3
5
4
35
34
6
7
33
31
8
10
9
30
29
11
12
28
26
13
15
14
25
24
16
17
23
21
18
20
19
1
40
39
1
238
36
3
5
4
35
34
6
733
31
8
10
9
30
29
11
12 28
26
13
15
14
25
24
16
17
22
21
18
20
19
37
32
23
27
2
4
40
39
1
2
38
36
3
5
4
35
33
6
7
32
31
8
10
9
30
29
11
12
28
26
13
15
14
25
23
16
17
21
18
20
19 22
5
40
1
38
36
3
5
4
35
6
33
31
8
10
9
30
11
28
26
13
15
14
25
16
22
21
18
20
19
37
32
23
27
6
40
1
39
37
2
4
3
35
6
34
32
7
9
8
30
11
29
27
12
14
13
25
16
23
22
17
19
18
38
33
24
28
3
140
39
2
38
36
3
5
4
35
34
6
7
33
31
8
10
9
30
29
11
12
28
26
13
15
14
25
24
16
17
22
21
18
20
19
37
32
23
27
36
5
31
10
26
15
21
20
7
40
1
39
37
2
4
3
35
6
34
32
7
9
8
30
11
29
27
12
14
13
25
16
23
22
17
19
18
38
33
24
28
NOTES FROM TABLES
A. OCL (primary inductance) is measured at the primary winding.
Turns ratio is specified primary: secondary. (CT = Center Tap).
B. To make a 1CT:1 ratio from a 1CT:2CT ratio, use only one-half
of the secondary (2CT) winding.
C. It is possible to use the same transformer model for the three
impedance levels of T1 (100Ω) and CEPT (75Ω& 120Ω). For
specific connection information and resistor values, refer to IC
vendors' data book.
D. Dual Ratio Transformer (T1071, T1111 and T1145) — These
transformers have tapped secondary windings to provide two
turns ratios (T/R). Use the entire primary winding and connect
the secondary pins listed below to obtain desired turns ratio:
Part Turns Secondary Turns Secondary
Number Ratio 1 Pins Ratio 2 Pins
1:1 40-39 1:1.26 40-38
T1071 1:1 35-34 1:1.26 35-33
and 1:1 30-29 1:1.26 30-28
T1111 1:1 25-24 1:1.26 25-23
1:2 40-39 1:2.4 40-38
1:2 33-32 1:2.4 33-31
T1145 1:2 30-29 1:2.4 30-28
1:2 23-22 1:2.4 23-21
E. Standard packaging for the surface mount package is anti-static
tubes. Optional Tape & Reel packaging can be ordered by
adding a “T” suffix to the part number, (i.e. T1063T).
F. Extended Temperature Range Models — For extended
temperature range transformers (-40°C to +85°C operating
temperature range), OCL (Open Circuit Inductance for the
primary winding) is specified at both -40°C and +25°C. At -
40°C, OCL is 600 µH minimum. All other parameters are
specified at +25°C only. Standard temperature range is 0°C
to +70°C.
USA 858 674 8100
••
Germany 49 7032 7806
••
Singapore 65 6287 8998
••
Shanghai
86 21 54643211 / 2
••
China 86 769 85538070
••
Taiwan 886 3 4641811
www.pulseeng.com
2T622.H (6/06)
T1/E1/CEPT/ISDN-PRI TRANSFORMERS
Quad Port T1/E1 with 8 Transformers, 1500Vrms
1. ET Product — All coils have an ET product of 10V-µsec minimum.
2. Flammability — Materials used in the products are recognized
as UL94-VO approved. Products meet the requirements of
IEC 695-2-2 (Needle Flame Test).
3. Balance Characteristics — The transformers meet the
requirements for longitudinal balance of FCC part 68.
4. Common Mode Rejection Ratio — the CMRR for all transformers
is better than 50dB at 1MHz. A typical test circuit is shown below.
5. Crosstalk Attenuation — In the packages which contain transmit
and receive transformers side by side, sufficient crosstalk
attenuation is achieved by the inherent characteristics of the toroid
cores as well as by their proper positioning. The crosstalk
attenuation is typically 65dB or better. This result was established
with the test circuit shown below.
6. Return Loss — ITU-T G.703 and European national regulatory
documents specify minimum return loss levels. The transformers
will allow these limits to be complied within the situations where
they are applicable.
Frequency 50-100kHz 100kHz-2MHz 2-3MHz
Return Loss
XMIT 9dB 15dB 11dB
RCV 12dB 18dB 14dB
7. Surge Voltage Capability – All transformers and chokes
meet surge voltage tests according to the most stringent
regulatory documents, when used with the proper voltage and cur-
rent suppression devices:
Metallic Voltage: 800V peak, 10/560µsec
Longitudinal Voltage: 2,400V peak, 10/700µsec
8. Isolation Voltage — 100% of transformers are tested during
production to the specified isolation voltage level.
9. General Information — The transformers are specifically
designed for use in 1.544Mbps (T1), 2.048Mbps (CEPT) and ISDN
Primary rate (PRI) interface applications. They are matched to the
majority of the line interface transceiver ICs currently
available. Use of the proper transformer allows the interface
circuit to comply with ITU-T G.703 and other standards regarding
pulse waveform, return loss, and balance.
10. Common Mode Chokes — Additional high-frequency 4-line
common mode chokes may be used to provide an effective means
of complying with national and international regulations on EMI.
The common mode chokes are designed to be used in conjunction
with Pulse’s T1/CEPT transformers as shown in the typical
application below. Crosstalk is typically -65dB or better.
HP-8751A
P1 P2
50:100
BALUN 100:50
BALUN
XFMR
50:100
BALUN
100:50
BALUN
XFMR
HP-8751A
P1 P2
100
100
8-Transformer
Package
XMIT 1
RCV 1
RCV 2
XMIT 2
XMIT 3
RCV 3
RCV 4
XMIT 4
IC 8-Transformer
Package IC
RCV 1
XMIT 1
XMIT 2
RCV 2
RCV 3
XMIT 3
XMIT 4
RCV 4
T8008 T8008
Typical Application
USA 858 674 8100
••
Germany 49 7032 7806
••
Singapore 65 6287 8998
••
Shanghai
86 21 54643211 / 2
••
China 86 769 85538070
••
Taiwan 886 3 4641811
www.pulseeng.com
3T622.H (6/06)
PE-XXXXX
Date Code
Country ofOrigin
85
14
.100
2,54
.600 MAX
15,24
.475 MAX
12,07
.475 MAX
12,07
SUGGESTED PAD LAYOUT
.300
7,62
.640
16,26
.400
10,16
.120
3,05
.050 TYP
1,27
.100 TYP
2,54
.085
2,16
.340 MAX
8,64
.040 / .050
1,02 / 1,27
.010 / .020
0,25 / 0,51
.004/0,10
.030
0,76
T1/E1/CEPT/ISDN-PRI TRANSFORMERS
Quad Port T1/E1 with 8 Transformers, 1500Vrms
Electrical Specifications @ 25°C
HIGH FREQUENCY COMMON MODE CHOKES
Mechanicals
8765
1234
PE-XXXXX
Date Code
Country of Origin
.595 MAX
15,11
.480 MAX
12,19
.130 ± .010
3,30 ± 0,25
.300
7,62
C
L
C
L
.300
7,62
MAX
.100
2,54
SH LA IN
Weight . . . . .0.3 grams . . . . 2 grams . . 2.5 grams
Tape & Reel . .1500/reel . . . .250/reel . . . . . . .(N/A)
Tube . . . . . . . . .25/tube . . . . .30/tube . . . . .35/tube
Dimensions: Inches
mm
Unless otherwise specified all tolerances are ± .010
0,25
Pulse Number Turns Ratio OCL CW/WLLDCR Isolation Package/
Part Number of Lines (±5%) (µH MIN) (pF MAX) (µH MAX) (ΩMAX) (Vrms MIN) Schematic
T8008 16 (8 x 2 line) 1:1 (8 places) 47.0 25 .18 0.40 500 TOU/2 (Surface Mount)
PE-65554 4 1:1:1:1 24.0 15 .20 0.30 500 IN/1 (Through Hole)
PE-65555 4 1:1:1:1 8.0 10 .20 0.25 500 IN/1 (Through Hole)
PE-65854 41:1:1:1 47.0 16 .20 0.30 500 SH/1 (Surface Mount)
PE-65857 41:1:1:1 24.0 15 .23 0.30 500 LA/1 (Surface Mount)
LA
IN
NOTE: For additional Common Mode Chokes, refer to data sheets G002, T627, T661, T639 and T673.
0
-5
-10
-15
-20
-25
-30
-35
-40
-45
Attenuation (dB)
1 MHz 10 MHz 100 MHz
Frequency
PE-65555
PE-65854
PE-65554/65857
T8008
Typical common mode attenuation for high
frequency common mode chokes based
on a 100Ωsystem.
Schematics
1
8
2
7
3
6
4
5
.300
7,62
SUGGESTED PAD LAYOUT
.100
2,54
8
14
PE-XXXXX
Date Code
Country of Origin
.340
8,64MAX
.070
1,78
.050
1,27
8X.050
1,27
.004/0,10
.360
9,14MAX
5
.100
2,54
.270
6,86
.098
2,49
MAX
SH
140
239
3 38
536
6 35
734
8 33
31
30
29
28
26
25
24
23
21
10
11
12
13
15
16
17
18
20
1 2
For More Information:
Pulse Worldwide
Headquarters
12220 World Trade Dr.
San Diego, CA 92128
U.S.A.
www.pulseeng.com
TEL: 858 674 8100
FAX: 858 674 8262
Pulse South Asia
150 Kampong Ampat
#07-01/02
KA Centre
Singapore 368324
Tel: 65 6287 8998
Fax: 65 6280 0080
Pulse North Asia
No. 26
Kao Ching Rd.
Yang Mei Chen
Taoyuan Hsien
Taiwan, R. O. C.
Tel: 886 3 4641811
Fax: 886 3 4641911
Pulse China
Headquarters
No. 1
Industrial District
Changan, Dongguan
China
Tel: 86 769 85538070
Fax: 86 769 85538870
Pulse North China
Room 1503
XinYin Building
No. 888 YiShan Rd.
Shanghai 200233
China
Tel: 86 21 54643211/2
Fax: 86 21 54643210
Pulse
Europe
Einsteinstrasse 1
D-71083 Herrenberg
Germany
Tel: 49 7032 7806 116
Fax: 49 7032 7806 135
www.pulseeng.com
4 T622.H (6/06)
Performance warranty of products offered on this data sheet is limited to the parameters specified. Data is subject to change without notice. Other brand and product
names mentioned herein may be trademarks or registered trademarks of their respective owners.
© Copyright, 2006. Pulse Engineering, Inc. All rights reserved.