TLV1117CKTPR - Texas Instruments - searchdatasheet.com

INPUT

OUTPUT

ADJ/GND

OUTPUT

KTT(TO-263)PACKAGE

(TOP VIEW)

OUTPUT

INPUT

ADJ/GND

OUTPUT

KVU(TO-252)PACKAGE

(TOP VIEW)

INPUT

OUTPUT

ADJ/GND

OUTPUT

DCY (SOT-223)PACKAGE

(TOP VIEW)

VOUT(2)

ADJ/GND

VIN(1)

VOUT(2)

(1)VIN pins (2,3,4)mustbeconnectedtogether.

(2) V

OUT pins(5,6,7)mustbeconnectedtogether.

VOUT

DRJ(QFN)PACKAGE

(TOP VIEW)

OUTPUT

INPUT

ADJ/GND

OUTPUT

KCS(TO-220)PACKAGE

(TOP VIEW)

TLV1117

www.ti.com

SLVS561J –DECEMBER 2004–REVISED AUGUST 2010

ADJUSTABLE AND FIXED LOW-DROPOUT VOLTAGE REGULATOR

Check for Samples: TLV1117

1FEATURES

• 1.5-V, 1.8-V, 2.5-V, 3.3-V, 5-V, and • Specified Dropout Voltage at Multiple Current

Adjustable-Output Voltage Options Levels

• Output Current of 800 mA • 0.2% Line Regulation Maximum

• 0.4% Load Regulation Maximum

DESCRIPTION/ORDERING INFORMATION

The TLV1117 is a positive low-dropout voltage regulator designed to provide up to 800 mA of output current. The

device is available in 1.5-V, 1.8-V, 2.5-V, 3.3-V, 5-V, and adjustable-output voltage options. All internal circuitry is

designed to operate down to 1-V input-to-output differential. Dropout voltage is specified at a maximum of 1.3 V

at 800 mA, decreasing at lower load currents.

The TLV1117 is designed to be stable with tantalum and aluminum electrolytic output capacitors having an ESR

between 0.2 Ωand 10 Ω.

Unlike pnp-type regulators, in which up to 10% of the output current is wasted as quiescent current, the

quiescent current of the TLV1117 flows into the load, increasing efficiency.

The TLV1117C device is characterized for operation over the virtual junction temperature range of 0°C to 125°C,

and the TLV1117I device is characterized for operation over the virtual junction temperature range of –40°C to

125°C.

1Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas

Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.

Products conform to specifications per the terms of the Texas

Instruments standard warranty. Production processing does not

necessarily include testing of all parameters.

TLV1117

SLVS561J –DECEMBER 2004–REVISED AUGUST 2010

www.ti.com

These devices have limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam

during storage or handling to prevent electrostatic damage to the MOS gates.

TLV1117C ORDERING INFORMATION(1)

TAVOTYP PACKAGE(2) ORDERABLE PART NUMBER TOP-SIDE MARKING

QFN – DRJ Reel of 1000 TLV1117-15CDRJR ZYH

Tube of 80 TLV1117-15CDCY

1.5 V SOT-223 – DCY T2

Reel of 2500 TLV1117-15CDCYR

TO-252 – KVU Reel of 2500 TLV1117-15CKVUR ZE15

QFN – DRJ Reel of 1000 TLV1117-18CDRJR ZYK

Tube of 80 TLV1117-18CDCY

1.8 V SOT-223 – DCY T4

Reel of 2500 TLV1117-18CDCYR

TO-252 – KVU Reel of 2500 TLV1117-18CKVUR ZE18

QFN – DRJ Reel of 1000 TLV1117-25CDRJR ZYM

Tube of 80 TLV1117-25CDCY

2.5 V SOT-223 – DCY T6

Reel of 2500 TLV1117-25CDCYR

TO-252 – KVU Reel of 2500 TLV1117-25CKVUR ZE25

QFN – DRJ Reel of 1000 TLV1117-33CDRJR ZYP

0°C to 125°C Tube of 80 TLV1117-33CDCY

3.3 V SOT-223 – DCY V3

Reel of 2500 TLV1117-33CDCYR

TO-252 – KVU Reel of 2500 TLV1117-33CKVUR ZE33

QFN – DRJ Reel of 1000 TLV1117-50CDRJR ZE50

Tube of 80 TLV1117-50CDCY

5 V SOT-223 – DCY VT

Reel of 2500 TLV1117-50CDCYR

TO-252 – KVU Reel of 2500 TLV1117-50CKVUR ZE50

QFN – DRJ Reel of 1000 TLV1117CDRJR ZYS

Tube of 80 TLV1117CDCY

SOT-223 – DCY V4

Reel of 2500 TLV1117CDCYR

ADJ TO-220 – KCS Tube of 50 TLV1117CKCS TLV1117C

TO-252 – KVU Reel of 2500 TLV1117CKVUR TV1117

TO-263 – KTT Reel of 500 TLV1117CKTTR TLV1117C

(1) For the most current package and ordering information, see the Package Option Addendum at the end of this document, or see the TI

web site at www.ti.com.

(2) Package drawings, thermal data, and symbolization are available at www.ti.com/packaging.

Product Folder Link(s): TLV1117

TLV1117

www.ti.com

SLVS561J –DECEMBER 2004–REVISED AUGUST 2010

TLV1117I ORDERING INFORMATION(1)

TAVOTYP PACKAGE(2) ORDERABLE PART NUMBER TOP-SIDE MARKING

QFN – DRJ Reel of 1000 TLV1117-15IDRJR ZYJ

Tube of 80 TLV1117-15IDCY

1.5 V SOT-223 – DCY T3

Reel of 2500 TLV1117-15IDCYR

TO-252 – KVU Reel of 2500 TLV1117-15IKVUR ZF15

QFN – DRJ Reel of 1000 TLV1117-18IDRJR ZYL

Tube of 80 TLV1117-18IDCY

1.8 V SOT-223 – DCY T5

Reel of 2500 TLV1117-18IDCYR

TO-252 – KVU Reel of 2500 TLV1117-18IKVUR ZF18

QFN – DRJ Reel of 1000 TLV1117-25IDRJR ZYN

Tube of 80 TLV1117-25IDCY

2.5 V SOT-223 – DCY T8

Reel of 2500 TLV1117-25IDCYR

TO-252 – KVU Reel of 2500 TLV1117-25IKVUR ZF25

QFN – DRJ Reel of 1000 TLV1117-33IDRJR ZYR

–40°C to 125°C Tube of 80 TLV1117-33IDCY

3.3 V SOT-223 – DCY VS

Reel of 2500 TLV1117-33IDCYR

TO-252 – KVU Reel of 2500 TLV1117-33IKVUR ZF33

QFN – DRJ Reel of 1000 TLV1117-50IDRJR ZF50

Tube of 80 TLV1117-50IDCY

5 V SOT-223 – DCY VU

Reel of 2500 TLV1117-50IDCYR

TO-252 – KVU Reel of 2500 TLV1117-50IKVUR ZF50

QFN – DRJ Reel of 1000 TLV1117IDRJR ZYT

Tube of 80 TLV1117IDCY

SOT-223 – DCY V2

Reel of 2500 TLV1117IDCYR

ADJ TO-220 – KCS Tube of 50 TLV1117IKCS TLV1117I

TO-252 – KVU Reel of 2500 TLV1117IKVUR TY1117

TO-263 – KTT Reel of 500 TLV1117IKTTR TLV1117I

(1) For the most current package and ordering information, see the Package Option Addendum at the end of this document, or see the TI

web site at www.ti.com.

(2) Package drawings, thermal data, and symbolization are available at www.ti.com/packaging.

Product Folder Link(s): TLV1117

−

Thermal

Limit

Current

Limit

VOUT

VIN

GND/ADJ (Fixed-Voltage Version)

GND/ADJ (Adjustable Version)

−

TLV1117

SLVS561J –DECEMBER 2004–REVISED AUGUST 2010

www.ti.com

FUNCTIONAL BLOCK DIAGRAM

Product Folder Link(s): TLV1117

TLV1117

www.ti.com

SLVS561J –DECEMBER 2004–REVISED AUGUST 2010

ABSOLUTE MAXIMUM RATINGS(1)

over operating free-air temperature range (unless otherwise noted) MIN MAX UNIT

VIN Continuous input voltage 16 V

TJOperating virtual-junction temperature 150 °C

Tstg Storage temperature range –65 150 °C

(1) Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratings

only, and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating

conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.

THERMAL INFORMATION TLV1117

PowerFlex

THERMAL METRIC(1)(2)(3) UNITS

KTE KTP DRJ DCY KVU KCS KTT

(3 PINS) (3 PINS) (8 PINS) (4 PINS) (3 PINS) (3 PINS) (3 PINS)

qJA Junction-to-ambient thermal resistance 38.6 49.2 38.3 104.3 50.9 30.1 27.5

qJCtop Junction-to-case (top) thermal resistance 34.7 60.6 36.5 53.7 57.9 44.6 43.2

qJB Junction-to-board thermal resistance 3.2 3.1 60.5 5.7 34.8 1.2 17.3

yJT Junction-to-top characterization parameter 5.9 8.7 0.2 3.1 6 5 2.8 °C/W

Junction-to-board characterization

yJB 3.1 3 12 5.5 23.7 1.2 9.3

parameter

Junction-to-case (bottom) thermal

qJCbot 3 3 4.7 n/a 0.4 0.4 0.3

resistance

Thermal resistance between the die

qJP junction and the bottom of the exposed 2.7 1.4 1.78 n/a n/a 3 1.94

pad.

(1) For more information about traditional and new thermal metrics, see the IC Package Thermal Metrics application report, SPRA953.

(2) For thermal estimates of this device based on PCB copper area, see the TI PCB Thermal Calculator.

(3) Maximum power dissipation is a function of TJ(max), qJA, and TA. The maximum allowable power dissipation at any allowable ambient

temperature is PD= (TJ(max) – TA)/qJA. Operating at the absolute maximum TJof 150°C can affect reliability.

RECOMMENDED OPERATING CONDITIONS MIN(1) MAX UNIT

TLV1117 2.7 15

TLV1117-15 2.9 15

TLV1117-18 3.2 15

VIN Input voltage V

TLV1117-25 3.9 15

TLV1117-33 4.7 15

TLV1117-50 6.4 15

IOOutput current 0.8 A

TLV1117C 0 125

TJOperating virtual-junction temperature °C

TLV1117I –40 125

(1) The input-to-output differential across the regulator should provide for some margin against regulator operation at the maximum dropout

(for a particular current value). This margin is needed to account for tolerances in both the input voltage (lower limit) and the output

voltage (upper limit). The absolute minimum VIN for a desired maximum output current can be calculated by the following:

VIN(min) = VOUT(max) + VDO(max at rated current)

Product Folder Link(s): TLV1117

TLV1117

SLVS561J –DECEMBER 2004–REVISED AUGUST 2010

www.ti.com

TLV1117C ELECTRICAL CHARACTERISTICS

TJ= 0°C to 125°C, all typical values are at TJ= 25°C (unless otherwise noted)

PARAMETER TEST CONDITIONS(1) MIN TYP MAX UNIT

VIN – VOUT = 2 V, IOUT = 10 mA, TJ= 25°C 1.238 1.25 1.262

Reference voltage, VREF TLV1117

VIN – VOUT = 1.4 V to 10 V, IOUT = 10 mA to 800 mA 1.225 1.25 1.27

VIN = 3.5 V, IOUT = 10 mA, TJ= 25°C 1.485 1.5 1.515

TLV1117-15

VIN = 2.9 V to 10 V, IOUT = 0 to 800 mA 1.455 1.5 1.545

VIN = 3.8 V, IOUT = 10 mA, TJ= 25°C 1.782 1.8 1.818

TLV1117-18

VIN = 3.2 V to 10 V, IOUT = 0 to 800 mA 1.746 1.8 1.854 V

VIN = 4.5 V, IOUT = 10 mA, TJ= 25°C 2.475 2.5 2.525

Output voltage, VOUT TLV1117-25

VIN = 3.9 V to 10 V, IOUT = 0 to 800 mA 2.450 2.5 2.550

VIN = 5 V, IOUT = 10 mA, TJ= 25°C 3.267 3.3 3.333

TLV1117-33

VIN = 4.75 V to 10 V, IOUT = 0 to 800 mA 3.235 3.3 3.365

VIN = 7 V, IOUT = 10 mA, TJ= 25°C 4.950 5.0 5.050

TLV1117-50

VIN = 6.5 V to 12 V, IOUT = 0 to 800 mA 4.900 5.0 5.100

IOUT = 10 mA, VIN – VOUT = 1.5 V to 13.75 V TLV1117 0.035 0.2 %

IOUT = 0 mA, VIN = 2.9 V to 10 V TLV1117-15 1 6

IOUT = 0 mA, VIN = 3.2 V to 10 V TLV1117-18 1 6

Line regulation IOUT = 0 mA, VIN = 3.9 V to 10 V TLV1117-25 1 6 mV

IOUT = 0 mA, VIN = 4.75 V to 15 V TLV1117-33 1 6

IOUT = 0 mA, VIN = 6.5 V to 15 V TLV1117-50 1 10

IOUT = 10 mA to 800 mA, VIN – VOUT = 3 V TLV1117 0.2 0.4 %

IOUT = 0 to 800 mA, VIN = 2.9 V TLV1117-15 1 10

IOUT = 0 to 800 mA, VIN = 3.2 V TLV1117-18 1 10

Load regulation IOUT = 0 to 800 mA, VIN = 3.9 V TLV1117-25 1 10 mV

IOUT = 0 to 800 mA, VIN = 4.75 V TLV1117-33 1 10

IOUT = 0 to 800 mA, VIN = 6.5 V TLV1117-50 1 15

IOUT = 100 mA 1.1 1.2

Dropout voltage, VDO (2) IOUT = 500 mA 1.15 1.25 V

IOUT = 800 mA 1.2 1.3

Current limit VIN – VOUT = 5 V, TJ= 25°C(3) 0.8 1.2 1.6 A

Minimum load current VIN = 15 V TLV1117 1.7 5 mA

All fixed-voltage

Quiescent current VIN ≤15 V 5 10 mA

options

Thermal regulation 30-ms pulse, TA= 25°C 0.01 0.1 %/W

Ripple rejection VIN – VOUT = 3 V, Vripple = 1 Vpp, f = 120 Hz 60 75 dB

ADJ pin current 80 120 mA

Change in ADJ pin current VIN – VOUT = 1.4 V to 10 V, IOUT = 10 mA to 800 mA 0.2 5 mA

Temperature stability TJ= full range 0.5 %

Long-term stability 1000 hrs, No load, TA= 125°C 0.3 %

Output noise voltage f = 10 Hz to 100 kHz 0.003 %

(% of VOUT)

(1) All characteristics are measured with a 10-mF capacitor across the input and a 10-mF capacitor across the output. Pulse testing

techniques are used to maintain the junction temperature as close to the ambient temperature as possible.

(2) Dropout is defined as the VIN to VOUT differential at which VOUT drops 100 mV below the value of VOUT,

measured at VIN = VOUT(nom) + 1.5 V.

(3) Current limit test specified under recommended operating conditions

Product Folder Link(s): TLV1117

TLV1117

www.ti.com

SLVS561J –DECEMBER 2004–REVISED AUGUST 2010

TLV1117I ELECTRICAL CHARACTERISTICS

TJ= –40°C to 125°C, all typical values are at TJ= 25°C (unless otherwise noted)

PARAMETER TEST CONDITIONS(1) MIN TYP MAX UNIT

VIN – VOUT = 2 V, IOUT = 10 mA, TJ= 25°C 1.238 1.25 1.262

Reference voltage, VREF TLV1117

VIN – VOUT = 1.4 V to 10 V, IOUT = 10 mA to 800 mA 1.200 1.25 1.29

VIN = 3.5 V, IOUT = 10 mA, TJ= 25°C 1.485 1.5 1.515

TLV1117-15

VIN = 2.9 V to 10 V, IOUT = 0 to 800 mA 1.44 1.5 1.56

VIN = 3.8 V, IOUT = 10 mA, TJ= 25°C 1.782 1.8 1.818

TLV1117-18

VIN = 3.2 V to 10 V, IOUT = 0 to 800 mA 1.728 1.8 1.872 V

VIN = 4.5 V, IOUT = 10 mA, TJ= 25°C 2.475 2.5 2.525

Output voltage, VOUT TLV1117-25

VIN = 3.9 V to 10 V, IOUT = 0 to 800 mA 2.4 2.5 2.6

VIN = 5 V, IOUT = 10 mA, TJ= 25°C 3.267 3.3 3.333

TLV1117-33

VIN = 4.75 V to 10 V, IOUT = 0 to 800 mA 3.168 3.3 3.432

VIN = 7 V, IOUT = 10 mA, TJ= 25°C 4.95 5.0 5.05

TLV1117-50

VIN = 6.5 V to 12 V, IOUT = 0 to 800 mA 4.80 5.0 5.20

IOUT = 10 mA, VIN – VOUT = 1.5 V to 13.75 V TLV1117 0.035 0.3 %

IOUT = 0 mA, VIN = 2.9 V to 10 V TLV1117-15 1 10

IOUT = 0 mA, VIN = 3.2 V to 10 V TLV1117-18 1 10

Line regulation IOUT = 0 mA, VIN = 3.9 V to 10 V TLV1117-25 1 10 mV

IOUT = 0 mA, VIN = 4.75 V to 15 V TLV1117-33 1 10

IOUT = 0 mA, VIN = 6.5 V to 15 V TLV1117-50 1 15

IOUT = 10 mA to 800 mA, VIN – VOUT = 3 V TLV1117 0.2 0.5 %

IOUT = 0 to 800 mA, VIN = 2.9 V TLV1117-15 1 15

IOUT = 0 to 800 mA, VIN = 3.2 V TLV1117-18 1 15

Load regulation IOUT = 0 to 800 mA, VIN = 3.9 V TLV1117-25 1 15 mV

IOUT = 0 to 800 mA, VIN = 4.75 V TLV1117-33 1 15

IOUT = 0 to 800 mA, VIN = 6.5 V TLV1117-50 1 20

IOUT = 100 mA 1.1 1.3

Dropout voltage, VDO (2) IOUT = 500 mA 1.15 1.35 V

IOUT = 800 mA 1.2 1.4

Current limit VIN – VOUT = 5 V, TJ= 25°C(3) 0.8 1.2 1.6 A

Minimum load current VIN = 15 V TLV1117 1.7 5 mA

All fixed-voltage

Quiescent current VIN ≤15 V 5 15 mA

options

Thermal regulation 30-ms pulse, TA= 25°C 0.01 0.1 %/W

Ripple rejection VIN – VOUT = 3 V, Vripple = 1 Vpp, f = 120 Hz 60 75 dB

ADJ pin current 80 120 mA

Change in ADJ pin current VIN – VOUT = 1.4 V to 10 V, IOUT = 10 mA to 800 mA 0.2 10 mA

Temperature stability TJ= full range 0.5 %

Long-term stability 1000 hrs, No load, TA= 125°C 0.3 %

Output noise voltage f = 10 Hz to 100 kHz 0.003 %

(% of VOUT)

(1) All characteristics are measured with a 10-mF capacitor across the input and a 10-mF capacitor across the output. Pulse testing

techniques are used to maintain the junction temperature as close to the ambient temperature as possible.

(2) Dropout is defined as the VIN to VOUT differential at which VOUT drops 100 mV below the value of VOUT,

measured at VIN = VOUT(nom) + 1.5 V.

(3) Current limit test specified under recommended operating conditions

Product Folder Link(s): TLV1117

Input/Output Differential (V)

Short-Circuit Current (A)

0.2

0.4

0.6

0.8

1.2

1.4

1.6

1.8

TJ = 255C

TJ = 1255C

0 1512963

−0.35

−0.3

−0.25

−0.2

−0.15

−0.1

−0.05

Temperature (5C)

1251007550250−25−50

DVOUT (%)

DLoad = 800 mA

Frequency (Hz)

Ripple Rejection (dB)

100k10k1k10010

0 200 400 600 800

Load (mA)

Ripple Rejection (dB)

f = 120 Hz

TLV1117

SLVS561J –DECEMBER 2004–REVISED AUGUST 2010

www.ti.com

TYPICAL CHARACTERISTICS

SHORT-CIRCUIT CURRENT

(VIN – VOUT) LOAD REGULATION

RIPPLE REJECTION RIPPLE REJECTION

vs vs

FREQUENCY LOAD CURRENT

(ADJ VERSION) (ADJ VERSION)

Product Folder Link(s): TLV1117

−2

−1.5

−1

−0.5

0.5

1.5

Temperature (5C)

Output Voltage Variation (%)

1251007550250−25−50 150

100

110

120

130

140

150

Temperature (5C)

ADJ Pin Current (mA)

1251007550250−25−50 150

−0.5

−0.4

−0.3

−0.2

−0.1

0.1

0.2

Time (ms)

Output Voltage Deviation (V)

−0.2

0.2

0.4

0.6

0.8

1.2

1.4

1.6

1.8

2.2

2.4

2.6

Load Current (A)

−60 200−20−40

CIN = 10 mF

COUT = 10-mF Tantalum

VIN = 4.8 V

Preload = 0.1 A

Output-Voltage Deviation

Load Current

−20

−10

100

Time (ms)

Output Voltage Deviation (mV)

Input Voltage (V)

CIN = 0.1 mF

COUT = 10-mF Tantalum

IOUT = 0.1 A

−40 −20 0 20 40 60 80 100 120 140

Input Voltage

Output-Voltage Deviation

TLV1117

www.ti.com

SLVS561J –DECEMBER 2004–REVISED AUGUST 2010

TYPICAL CHARACTERISTICS (continued)

ADJ PIN CURRENT

TEMPERATURE STABILITY TEMPERATURE

TLV1117-33 LOAD TRANSIENT RESPONSE TLV1117-33 LINE TRANSIENT RESPONSE

Product Folder Link(s): TLV1117

0.2

0.4

0.6

0.8

1.2

1.4

Load Current (mA)

Dropout Voltage (V)

0 800700600500400300200100

TJ = 255C

TJ = 1255C

TLV1117

SLVS561J –DECEMBER 2004–REVISED AUGUST 2010

www.ti.com

TYPICAL CHARACTERISTICS (continued)

DROPOUT VOLTAGE

LOAD CURRENT

Product Folder Link(s): TLV1117

10 µF

(see Note C) 100 µF

(see Note A)

INPUT OUTPUT

ADJ/GND

TLV1117 − ADJ

CADJ

(see Note B)

1N4002 (See Note D)

IADJ VREF

Because IADJ typically is 55 µA, it is negligible in most applications.

VOUT +VREFǒ1)R2

R1Ǔ)(IADJ R2)

VOUT is calculated as:

TLV1117

www.ti.com

SLVS561J –DECEMBER 2004–REVISED AUGUST 2010

APPLICATION INFORMATION

A. Output capacitor selection is critical for regulator stability. Larger COUT values benefit the regulator by improving

transient response and loop stability.

B. CADJ can be used to improve ripple rejection. If CADJ is used, a COUT that is larger in value than CADJ must be used.

C. CIN is recommended if TLV1117 is not located near the power-supply filter.

D. An external diode is recommended to protect the regulator if the input instantaneously is shorted to GND.

E. This device is designed to be stable with tantalum and aluminum electrolytic output capacitors having an ESR

between 0.2 Ωand 10 Ω.

Figure 1. Basic Adjustable Regulator

Product Folder Link(s): TLV1117

PACKAGE OPTION ADDENDUM

www.ti.com 7-Jun-2010

Addendum-Page 1

PACKAGING INFORMATION

Orderable Device Status (1) Package Type Package

Drawing Pins Package Qty Eco Plan (2) Lead/

Ball Finish MSL Peak Temp (3) Samples

(Requires Login)

TLV1117-15CDCY ACTIVE SOT-223 DCY 4 80 Green (RoHS

& no Sb/Br) CU SN Level-2-260C-1 YEAR Purchase Samples

TLV1117-15CDCYG3 ACTIVE SOT-223 DCY 4 80 Green (RoHS

& no Sb/Br) CU SN Level-2-260C-1 YEAR Purchase Samples

TLV1117-15CDCYR ACTIVE SOT-223 DCY 4 2500 Green (RoHS

& no Sb/Br) CU SN Level-2-260C-1 YEAR Request Free Samples

TLV1117-15CDCYRG3 ACTIVE SOT-223 DCY 4 2500 Green (RoHS

& no Sb/Br) CU SN Level-2-260C-1 YEAR Request Free Samples

TLV1117-15CDRJR ACTIVE SON DRJ 8 1000 Green (RoHS

& no Sb/Br) CU NIPDAU Level-2-260C-1 YEAR Request Free Samples

TLV1117-15CDRJRG4 ACTIVE SON DRJ 8 1000 Green (RoHS

& no Sb/Br) CU NIPDAU Level-2-260C-1 YEAR Request Free Samples

TLV1117-15CKVURG3 ACTIVE PFM KVU 3 2500 Green (RoHS

& no Sb/Br) CU SN Level-3-260C-168 HR Purchase Samples

TLV1117-15IDCY ACTIVE SOT-223 DCY 4 80 Green (RoHS

& no Sb/Br) CU SN Level-2-260C-1 YEAR Purchase Samples

TLV1117-15IDCYG3 ACTIVE SOT-223 DCY 4 80 Green (RoHS

& no Sb/Br) CU SN Level-2-260C-1 YEAR Purchase Samples

TLV1117-15IDCYR ACTIVE SOT-223 DCY 4 2500 Green (RoHS

& no Sb/Br) CU SN Level-2-260C-1 YEAR Request Free Samples

TLV1117-15IDCYRG3 ACTIVE SOT-223 DCY 4 2500 Green (RoHS

& no Sb/Br) CU SN Level-2-260C-1 YEAR Request Free Samples

TLV1117-15IDRJR ACTIVE SON DRJ 8 1000 Green (RoHS

& no Sb/Br) CU NIPDAU Level-2-260C-1 YEAR Purchase Samples

TLV1117-15IDRJRG4 ACTIVE SON DRJ 8 1000 Green (RoHS

& no Sb/Br) CU NIPDAU Level-2-260C-1 YEAR Purchase Samples

TLV1117-15IKVURG3 ACTIVE PFM KVU 3 2500 Green (RoHS

& no Sb/Br) CU SN Level-3-260C-168 HR Request Free Samples

TLV1117-18CDCY ACTIVE SOT-223 DCY 4 80 Green (RoHS

& no Sb/Br) CU SN Level-2-260C-1 YEAR Purchase Samples

TLV1117-18CDCYG3 ACTIVE SOT-223 DCY 4 80 Green (RoHS

& no Sb/Br) CU SN Level-2-260C-1 YEAR Purchase Samples

TLV1117-18CDCYR ACTIVE SOT-223 DCY 4 2500 Green (RoHS

& no Sb/Br) CU SN Level-2-260C-1 YEAR Request Free Samples

PACKAGE OPTION ADDENDUM

www.ti.com 7-Jun-2010

Addendum-Page 2

Orderable Device Status (1) Package Type Package

Drawing Pins Package Qty Eco Plan (2) Lead/

Ball Finish MSL Peak Temp (3) Samples

(Requires Login)

TLV1117-18CDCYRG3 ACTIVE SOT-223 DCY 4 2500 Green (RoHS

& no Sb/Br) CU SN Level-2-260C-1 YEAR Request Free Samples

TLV1117-18CDRJR ACTIVE SON DRJ 8 1000 Green (RoHS

& no Sb/Br) CU NIPDAU Level-2-260C-1 YEAR Request Free Samples

TLV1117-18CDRJRG4 ACTIVE SON DRJ 8 1000 Green (RoHS

& no Sb/Br) CU NIPDAU Level-2-260C-1 YEAR Request Free Samples

TLV1117-18CKVURG3 ACTIVE PFM KVU 3 2500 Green (RoHS

& no Sb/Br) CU SN Level-3-260C-168 HR Request Free Samples

TLV1117-18IDCY ACTIVE SOT-223 DCY 4 80 Green (RoHS

& no Sb/Br) CU SN Level-2-260C-1 YEAR Purchase Samples

TLV1117-18IDCYG3 ACTIVE SOT-223 DCY 4 80 Green (RoHS

& no Sb/Br) CU SN Level-2-260C-1 YEAR Purchase Samples

TLV1117-18IDCYR ACTIVE SOT-223 DCY 4 2500 Green (RoHS

& no Sb/Br) CU SN Level-2-260C-1 YEAR Request Free Samples

TLV1117-18IDCYRG3 ACTIVE SOT-223 DCY 4 2500 Green (RoHS

& no Sb/Br) CU SN Level-2-260C-1 YEAR Request Free Samples

TLV1117-18IDRJR ACTIVE SON DRJ 8 1000 Green (RoHS

& no Sb/Br) CU NIPDAU Level-2-260C-1 YEAR Purchase Samples

TLV1117-18IDRJRG4 ACTIVE SON DRJ 8 1000 Green (RoHS

& no Sb/Br) CU NIPDAU Level-2-260C-1 YEAR Purchase Samples

TLV1117-18IKVURG3 ACTIVE PFM KVU 3 2500 Green (RoHS

& no Sb/Br) CU SN Level-3-260C-168 HR Request Free Samples

TLV1117-25CDCY ACTIVE SOT-223 DCY 4 80 Green (RoHS

& no Sb/Br) CU SN Level-2-260C-1 YEAR Purchase Samples

TLV1117-25CDCYG3 ACTIVE SOT-223 DCY 4 80 Green (RoHS

& no Sb/Br) CU SN Level-2-260C-1 YEAR Purchase Samples

TLV1117-25CDCYR ACTIVE SOT-223 DCY 4 2500 Green (RoHS

& no Sb/Br) CU SN Level-2-260C-1 YEAR Request Free Samples

TLV1117-25CDCYRG3 ACTIVE SOT-223 DCY 4 2500 Green (RoHS

& no Sb/Br) CU SN Level-2-260C-1 YEAR Request Free Samples

TLV1117-25CDRJR ACTIVE SON DRJ 8 1000 Green (RoHS

& no Sb/Br) CU NIPDAU Level-2-260C-1 YEAR Purchase Samples

TLV1117-25CDRJRG4 ACTIVE SON DRJ 8 1000 Green (RoHS

& no Sb/Br) CU NIPDAU Level-2-260C-1 YEAR Purchase Samples

TLV1117-25CKVURG3 ACTIVE PFM KVU 3 2500 Green (RoHS

& no Sb/Br) CU SN Level-3-260C-168 HR Purchase Samples

PACKAGE OPTION ADDENDUM

www.ti.com 7-Jun-2010

Addendum-Page 3

Orderable Device Status (1) Package Type Package

Drawing Pins Package Qty Eco Plan (2) Lead/

Ball Finish MSL Peak Temp (3) Samples

(Requires Login)

TLV1117-25IDCY ACTIVE SOT-223 DCY 4 80 Green (RoHS

& no Sb/Br) CU SN Level-2-260C-1 YEAR Purchase Samples

TLV1117-25IDCYG3 ACTIVE SOT-223 DCY 4 80 Green (RoHS

& no Sb/Br) CU SN Level-2-260C-1 YEAR Purchase Samples

TLV1117-25IDCYR ACTIVE SOT-223 DCY 4 2500 Green (RoHS

& no Sb/Br) CU SN Level-2-260C-1 YEAR Request Free Samples

TLV1117-25IDCYRG3 ACTIVE SOT-223 DCY 4 2500 Green (RoHS

& no Sb/Br) CU SN Level-2-260C-1 YEAR Request Free Samples

TLV1117-25IDRJR ACTIVE SON DRJ 8 1000 Green (RoHS

& no Sb/Br) CU NIPDAU Level-2-260C-1 YEAR Purchase Samples

TLV1117-25IDRJRG4 ACTIVE SON DRJ 8 1000 Green (RoHS

& no Sb/Br) CU NIPDAU Level-2-260C-1 YEAR Purchase Samples

TLV1117-25IKCS PREVIEW TO-220 KCS 3 50 TBD Call TI Call TI Samples Not Available

TLV1117-25IKVURG3 ACTIVE PFM KVU 3 2500 Green (RoHS

& no Sb/Br) CU SN Level-3-260C-168 HR Purchase Samples

TLV1117-33CDCY ACTIVE SOT-223 DCY 4 80 Green (RoHS

& no Sb/Br) CU SN Level-2-260C-1 YEAR Purchase Samples

TLV1117-33CDCYG3 ACTIVE SOT-223 DCY 4 80 Green (RoHS

& no Sb/Br) CU SN Level-2-260C-1 YEAR Purchase Samples

TLV1117-33CDCYR ACTIVE SOT-223 DCY 4 2500 Green (RoHS

& no Sb/Br) CU SN Level-2-260C-1 YEAR Request Free Samples

TLV1117-33CDCYRG3 ACTIVE SOT-223 DCY 4 2500 Green (RoHS

& no Sb/Br) CU SN Level-2-260C-1 YEAR Request Free Samples

TLV1117-33CDRJR ACTIVE SON DRJ 8 1000 Green (RoHS

& no Sb/Br) CU NIPDAU Level-2-260C-1 YEAR Request Free Samples

TLV1117-33CDRJRG4 ACTIVE SON DRJ 8 1000 Green (RoHS

& no Sb/Br) CU NIPDAU Level-2-260C-1 YEAR Request Free Samples

TLV1117-33CKVURG3 ACTIVE PFM KVU 3 2500 Green (RoHS

& no Sb/Br) CU SN Level-3-260C-168 HR Purchase Samples

TLV1117-33IDCY ACTIVE SOT-223 DCY 4 80 Green (RoHS

& no Sb/Br) CU SN Level-2-260C-1 YEAR Contact TI Distributor

or Sales Office

TLV1117-33IDCYG3 ACTIVE SOT-223 DCY 4 80 Green (RoHS

& no Sb/Br) CU SN Level-2-260C-1 YEAR Contact TI Distributor

or Sales Office

TLV1117-33IDCYR ACTIVE SOT-223 DCY 4 2500 Green (RoHS

& no Sb/Br) CU SN Level-2-260C-1 YEAR Request Free Samples

PACKAGE OPTION ADDENDUM

www.ti.com 7-Jun-2010

Addendum-Page 4

Orderable Device Status (1) Package Type Package

Drawing Pins Package Qty Eco Plan (2) Lead/

Ball Finish MSL Peak Temp (3) Samples

(Requires Login)

TLV1117-33IDCYRG3 ACTIVE SOT-223 DCY 4 2500 Green (RoHS

& no Sb/Br) CU SN Level-2-260C-1 YEAR Request Free Samples

TLV1117-33IDRJR ACTIVE SON DRJ 8 1000 Green (RoHS

& no Sb/Br) CU NIPDAU Level-2-260C-1 YEAR Purchase Samples

TLV1117-33IDRJRG4 ACTIVE SON DRJ 8 1000 Green (RoHS

& no Sb/Br) CU NIPDAU Level-2-260C-1 YEAR Purchase Samples

TLV1117-33IKVURG3 ACTIVE PFM KVU 3 2500 Green (RoHS

& no Sb/Br) CU SN Level-3-260C-168 HR Request Free Samples

TLV1117-50CDCY ACTIVE SOT-223 DCY 4 80 Green (RoHS

& no Sb/Br) CU SN Level-2-260C-1 YEAR Purchase Samples

TLV1117-50CDCYG3 ACTIVE SOT-223 DCY 4 80 Green (RoHS

& no Sb/Br) CU SN Level-2-260C-1 YEAR Purchase Samples

TLV1117-50CDCYR ACTIVE SOT-223 DCY 4 2500 Green (RoHS

& no Sb/Br) CU SN Level-2-260C-1 YEAR Request Free Samples

TLV1117-50CDCYRG3 ACTIVE SOT-223 DCY 4 2500 Green (RoHS

& no Sb/Br) CU SN Level-2-260C-1 YEAR Request Free Samples

TLV1117-50CDRJR ACTIVE SON DRJ 8 1000 Green (RoHS

& no Sb/Br) CU NIPDAU Level-2-260C-1 YEAR Request Free Samples

TLV1117-50CDRJRG4 ACTIVE SON DRJ 8 1000 Green (RoHS

& no Sb/Br) CU NIPDAU Level-2-260C-1 YEAR Request Free Samples

TLV1117-50CKVURG3 ACTIVE PFM KVU 3 2500 Green (RoHS

& no Sb/Br) CU SN Level-3-260C-168 HR Contact TI Distributor

or Sales Office

TLV1117-50IDCY ACTIVE SOT-223 DCY 4 80 Green (RoHS

& no Sb/Br) CU SN Level-2-260C-1 YEAR Contact TI Distributor

or Sales Office

TLV1117-50IDCYG3 ACTIVE SOT-223 DCY 4 80 Green (RoHS

& no Sb/Br) CU SN Level-2-260C-1 YEAR Contact TI Distributor

or Sales Office

TLV1117-50IDCYR ACTIVE SOT-223 DCY 4 2500 Green (RoHS

& no Sb/Br) CU SN Level-2-260C-1 YEAR Request Free Samples

TLV1117-50IDCYRG3 ACTIVE SOT-223 DCY 4 2500 Green (RoHS

& no Sb/Br) CU SN Level-2-260C-1 YEAR Request Free Samples

TLV1117-50IDRJR ACTIVE SON DRJ 8 1000 Green (RoHS

& no Sb/Br) CU NIPDAU Level-2-260C-1 YEAR Request Free Samples

TLV1117-50IDRJRG4 ACTIVE SON DRJ 8 1000 Green (RoHS

& no Sb/Br) CU NIPDAU Level-2-260C-1 YEAR Request Free Samples

TLV1117-50IKVURG3 ACTIVE PFM KVU 3 2500 Green (RoHS

& no Sb/Br) CU SN Level-3-260C-168 HR Request Free Samples

PACKAGE OPTION ADDENDUM

www.ti.com 7-Jun-2010

Addendum-Page 5

Orderable Device Status (1) Package Type Package

Drawing Pins Package Qty Eco Plan (2) Lead/

Ball Finish MSL Peak Temp (3) Samples

(Requires Login)

TLV1117CDCY ACTIVE SOT-223 DCY 4 80 Green (RoHS

& no Sb/Br) CU SN Level-2-260C-1 YEAR Purchase Samples

TLV1117CDCYG3 ACTIVE SOT-223 DCY 4 80 Green (RoHS

& no Sb/Br) CU SN Level-2-260C-1 YEAR Purchase Samples

TLV1117CDCYR ACTIVE SOT-223 DCY 4 2500 Green (RoHS

& no Sb/Br) CU SN Level-2-260C-1 YEAR Request Free Samples

TLV1117CDCYRG3 ACTIVE SOT-223 DCY 4 2500 Green (RoHS

& no Sb/Br) CU SN Level-2-260C-1 YEAR Request Free Samples

TLV1117CDRJR ACTIVE SON DRJ 8 1000 Green (RoHS

& no Sb/Br) CU NIPDAU Level-2-260C-1 YEAR Request Free Samples

TLV1117CDRJRG4 ACTIVE SON DRJ 8 1000 Green (RoHS

& no Sb/Br) CU NIPDAU Level-2-260C-1 YEAR Request Free Samples

TLV1117CKCS ACTIVE TO-220 KCS 3 50 Pb-Free (RoHS) CU SN N / A for Pkg Type Request Free Samples

TLV1117CKCSE3 ACTIVE TO-220 KCS 3 50 Pb-Free (RoHS) CU SN N / A for Pkg Type Request Free Samples

TLV1117CKTER OBSOLETE PFM KTE 3 TBD Call TI Call TI Samples Not Available

TLV1117CKTPR OBSOLETE PFM KTP 2 TBD Call TI Call TI Samples Not Available

TLV1117CKTPRG3 OBSOLETE PFM KTP 2 TBD Call TI Call TI Samples Not Available

TLV1117CKTTR ACTIVE DDPAK/

TO-263 KTT 3 500 Green (RoHS

& no Sb/Br) CU SN Level-3-245C-168 HR Request Free Samples

TLV1117CKTTRG3 ACTIVE DDPAK/

TO-263 KTT 3 500 Green (RoHS

& no Sb/Br) CU SN Level-3-245C-168 HR Request Free Samples

TLV1117CKVURG3 ACTIVE PFM KVU 3 2500 Green (RoHS

& no Sb/Br) CU SN Level-3-260C-168 HR Request Free Samples

TLV1117IDCY ACTIVE SOT-223 DCY 4 80 Green (RoHS

& no Sb/Br) CU SN Level-2-260C-1 YEAR Contact TI Distributor

or Sales Office

TLV1117IDCYG3 ACTIVE SOT-223 DCY 4 80 Green (RoHS

& no Sb/Br) CU SN Level-2-260C-1 YEAR Contact TI Distributor

or Sales Office

TLV1117IDCYR ACTIVE SOT-223 DCY 4 2500 Green (RoHS

& no Sb/Br) CU SN Level-2-260C-1 YEAR Request Free Samples

TLV1117IDCYRG3 ACTIVE SOT-223 DCY 4 2500 Green (RoHS

& no Sb/Br) CU SN Level-2-260C-1 YEAR Request Free Samples

TLV1117IDRJR ACTIVE SON DRJ 8 1000 Green (RoHS

& no Sb/Br) CU NIPDAU Level-2-260C-1 YEAR Request Free Samples

TLV1117IDRJRG4 ACTIVE SON DRJ 8 1000 Green (RoHS

& no Sb/Br) CU NIPDAU Level-2-260C-1 YEAR Request Free Samples

PACKAGE OPTION ADDENDUM

www.ti.com 7-Jun-2010

Addendum-Page 6

Orderable Device Status (1) Package Type Package

Drawing Pins Package Qty Eco Plan (2) Lead/

Ball Finish MSL Peak Temp (3) Samples

(Requires Login)

TLV1117IKCS ACTIVE TO-220 KCS 3 50 Pb-Free (RoHS) CU SN N / A for Pkg Type Request Free Samples

TLV1117IKCSE3 ACTIVE TO-220 KCS 3 50 Pb-Free (RoHS) CU SN N / A for Pkg Type Request Free Samples

TLV1117IKTER OBSOLETE PFM KTE 3 TBD Call TI Call TI Samples Not Available

TLV1117IKTPR OBSOLETE PFM KTP 2 TBD Call TI Call TI Samples Not Available

TLV1117IKTPRG3 OBSOLETE PFM KTP 2 TBD Call TI Call TI Samples Not Available

TLV1117IKTTR ACTIVE DDPAK/

TO-263 KTT 3 500 Green (RoHS

& no Sb/Br) CU SN Level-3-245C-168 HR Request Free Samples

TLV1117IKTTRG3 ACTIVE DDPAK/

TO-263 KTT 3 500 Green (RoHS

& no Sb/Br) CU SN Level-3-245C-168 HR Request Free Samples

TLV1117IKVURG3 ACTIVE PFM KVU 3 2500 Green (RoHS

& no Sb/Br) CU SN Level-3-260C-168 HR Request Free Samples

(1) The marketing status values are defined as follows:

ACTIVE: Product device recommended for new designs.

LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect.

NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design.

PREVIEW: Device has been announced but is not in production. Samples may or may not be available.

OBSOLETE: TI has discontinued the production of the device.

(2) Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check http://www.ti.com/productcontent for the latest availability

information and additional product content details.

TBD: The Pb-Free/Green conversion plan has not been defined.

Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that

lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes.

Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and package, or 2) lead-based die adhesive used between

the die and leadframe. The component is otherwise considered Pb-Free (RoHS compatible) as defined above.

Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame retardants (Br or Sb do not exceed 0.1% by weight

in homogeneous material)

(3) MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature.

Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information

provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and

continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals.

TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release.

In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis.

PACKAGE OPTION ADDENDUM

www.ti.com 7-Jun-2010

Addendum-Page 7

TAPE AND REEL INFORMATION

*All dimensions are nominal

Device Package

Type Package

Drawing Pins SPQ Reel

Diameter

(mm)

Reel

Width

W1 (mm)

(mm) B0

(mm) K0

(mm) P1

(mm) W

(mm) Pin1

Quadrant

TLV1117-15CDCYR SOT-223 DCY 4 2500 330.0 12.4 7.05 7.4 1.9 8.0 12.0 Q3

TLV1117-15CDRJR SON DRJ 8 1000 180.0 12.4 4.25 4.25 1.15 8.0 12.0 Q2

TLV1117-15CKVURG3 PFM KVU 3 2500 330.0 16.4 6.9 10.5 2.7 8.0 16.0 Q2

TLV1117-15IDCYR SOT-223 DCY 4 2500 330.0 12.4 7.05 7.4 1.9 8.0 12.0 Q3

TLV1117-15IDRJR SON DRJ 8 1000 180.0 12.4 4.25 4.25 1.15 8.0 12.0 Q2

TLV1117-15IKVURG3 PFM KVU 3 2500 330.0 16.4 6.9 10.5 2.7 8.0 16.0 Q2

TLV1117-18CDCYR SOT-223 DCY 4 2500 330.0 12.4 7.05 7.4 1.9 8.0 12.0 Q3

TLV1117-18CDRJR SON DRJ 8 1000 180.0 12.4 4.25 4.25 1.15 8.0 12.0 Q2

TLV1117-18CKVURG3 PFM KVU 3 2500 330.0 16.4 6.9 10.5 2.7 8.0 16.0 Q2

TLV1117-18IDCYR SOT-223 DCY 4 2500 330.0 12.4 7.05 7.4 1.9 8.0 12.0 Q3

TLV1117-18IDRJR SON DRJ 8 1000 180.0 12.4 4.25 4.25 1.15 8.0 12.0 Q2

TLV1117-18IKVURG3 PFM KVU 3 2500 330.0 16.4 6.9 10.5 2.7 8.0 16.0 Q2

TLV1117-25CDCYR SOT-223 DCY 4 2500 330.0 12.4 7.05 7.4 1.9 8.0 12.0 Q3

TLV1117-25CDRJR SON DRJ 8 1000 180.0 12.4 4.25 4.25 1.15 8.0 12.0 Q2

TLV1117-25CKVURG3 PFM KVU 3 2500 330.0 16.4 6.9 10.5 2.7 8.0 16.0 Q2

TLV1117-25IDCYR SOT-223 DCY 4 2500 330.0 12.4 7.05 7.4 1.9 8.0 12.0 Q3

TLV1117-25IDRJR SON DRJ 8 1000 180.0 12.4 4.25 4.25 1.15 8.0 12.0 Q2

TLV1117-25IKVURG3 PFM KVU 3 2500 330.0 16.4 6.9 10.5 2.7 8.0 16.0 Q2

PACKAGE MATERIALS INFORMATION

www.ti.com 1-Dec-2011

Pack Materials-Page 1

Device Package

Type Package

Drawing Pins SPQ Reel

Diameter

(mm)

Reel

Width

W1 (mm)

(mm) B0

(mm) K0

(mm) P1

(mm) W

(mm) Pin1

Quadrant

TLV1117-33CDCYR SOT-223 DCY 4 2500 330.0 12.4 7.05 7.4 1.9 8.0 12.0 Q3

TLV1117-33CDRJR SON DRJ 8 1000 180.0 12.4 4.25 4.25 1.15 8.0 12.0 Q2

TLV1117-33CKVURG3 PFM KVU 3 2500 330.0 16.4 6.9 10.5 2.7 8.0 16.0 Q2

TLV1117-33IDCYR SOT-223 DCY 4 2500 330.0 12.4 7.05 7.4 1.9 8.0 12.0 Q3

TLV1117-33IDRJR SON DRJ 8 1000 180.0 12.4 4.25 4.25 1.15 8.0 12.0 Q2

TLV1117-33IKVURG3 PFM KVU 3 2500 330.0 16.4 6.9 10.5 2.7 8.0 16.0 Q2

TLV1117-50CDCYR SOT-223 DCY 4 2500 330.0 12.4 7.05 7.4 1.9 8.0 12.0 Q3

TLV1117-50CDRJR SON DRJ 8 1000 180.0 12.4 4.25 4.25 1.15 8.0 12.0 Q2

TLV1117-50CKVURG3 PFM KVU 3 2500 330.0 16.4 6.9 10.5 2.7 8.0 16.0 Q2

TLV1117-50IDCYR SOT-223 DCY 4 2500 330.0 12.4 7.05 7.4 1.9 8.0 12.0 Q3

TLV1117-50IDRJR SON DRJ 8 1000 180.0 12.4 4.25 4.25 1.15 8.0 12.0 Q2

TLV1117-50IKVURG3 PFM KVU 3 2500 330.0 16.4 6.9 10.5 2.7 8.0 16.0 Q2

TLV1117CDCYR SOT-223 DCY 4 2500 330.0 12.4 7.05 7.4 1.9 8.0 12.0 Q3

TLV1117CDRJR SON DRJ 8 1000 180.0 12.4 4.25 4.25 1.15 8.0 12.0 Q2

TLV1117CKTTR DDPAK/

TO-263 KTT 3 500 330.0 24.4 10.6 15.8 4.9 16.0 24.0 Q2

TLV1117CKVURG3 PFM KVU 3 2500 330.0 16.4 6.9 10.5 2.7 8.0 16.0 Q2

TLV1117IDCYR SOT-223 DCY 4 2500 330.0 12.4 7.05 7.4 1.9 8.0 12.0 Q3

TLV1117IDRJR SON DRJ 8 1000 180.0 12.4 4.25 4.25 1.15 8.0 12.0 Q2

TLV1117IKTTR DDPAK/

TO-263 KTT 3 500 330.0 24.4 10.6 15.8 4.9 16.0 24.0 Q2

TLV1117IKVURG3 PFM KVU 3 2500 330.0 16.4 6.9 10.5 2.7 8.0 16.0 Q2

PACKAGE MATERIALS INFORMATION

www.ti.com 1-Dec-2011

Pack Materials-Page 2

*All dimensions are nominal

Device Package Type Package Drawing Pins SPQ Length (mm) Width (mm) Height (mm)

TLV1117-15CDCYR SOT-223 DCY 4 2500 340.0 340.0 38.0

TLV1117-15CDRJR SON DRJ 8 1000 210.0 185.0 35.0

TLV1117-15CKVURG3 PFM KVU 3 2500 340.0 340.0 38.0

TLV1117-15IDCYR SOT-223 DCY 4 2500 340.0 340.0 38.0

TLV1117-15IDRJR SON DRJ 8 1000 210.0 185.0 35.0

TLV1117-15IKVURG3 PFM KVU 3 2500 340.0 340.0 38.0

TLV1117-18CDCYR SOT-223 DCY 4 2500 340.0 340.0 38.0

TLV1117-18CDRJR SON DRJ 8 1000 210.0 185.0 35.0

TLV1117-18CKVURG3 PFM KVU 3 2500 340.0 340.0 38.0

TLV1117-18IDCYR SOT-223 DCY 4 2500 340.0 340.0 38.0

TLV1117-18IDRJR SON DRJ 8 1000 210.0 185.0 35.0

TLV1117-18IKVURG3 PFM KVU 3 2500 340.0 340.0 38.0

TLV1117-25CDCYR SOT-223 DCY 4 2500 340.0 340.0 38.0

TLV1117-25CDRJR SON DRJ 8 1000 210.0 185.0 35.0

TLV1117-25CKVURG3 PFM KVU 3 2500 340.0 340.0 38.0

TLV1117-25IDCYR SOT-223 DCY 4 2500 340.0 340.0 38.0

TLV1117-25IDRJR SON DRJ 8 1000 210.0 185.0 35.0

TLV1117-25IKVURG3 PFM KVU 3 2500 340.0 340.0 38.0

TLV1117-33CDCYR SOT-223 DCY 4 2500 340.0 340.0 38.0

TLV1117-33CDRJR SON DRJ 8 1000 210.0 185.0 35.0

PACKAGE MATERIALS INFORMATION

www.ti.com 1-Dec-2011

Pack Materials-Page 3

Device Package Type Package Drawing Pins SPQ Length (mm) Width (mm) Height (mm)

TLV1117-33CKVURG3 PFM KVU 3 2500 340.0 340.0 38.0

TLV1117-33IDCYR SOT-223 DCY 4 2500 340.0 340.0 38.0

TLV1117-33IDRJR SON DRJ 8 1000 210.0 185.0 35.0

TLV1117-33IKVURG3 PFM KVU 3 2500 340.0 340.0 38.0

TLV1117-50CDCYR SOT-223 DCY 4 2500 340.0 340.0 38.0

TLV1117-50CDRJR SON DRJ 8 1000 210.0 185.0 35.0

TLV1117-50CKVURG3 PFM KVU 3 2500 340.0 340.0 38.0

TLV1117-50IDCYR SOT-223 DCY 4 2500 340.0 340.0 38.0

TLV1117-50IDRJR SON DRJ 8 1000 210.0 185.0 35.0

TLV1117-50IKVURG3 PFM KVU 3 2500 340.0 340.0 38.0

TLV1117CDCYR SOT-223 DCY 4 2500 340.0 340.0 38.0

TLV1117CDRJR SON DRJ 8 1000 210.0 185.0 35.0

TLV1117CKTTR DDPAK/TO-263 KTT 3 500 340.0 340.0 38.0

TLV1117CKVURG3 PFM KVU 3 2500 340.0 340.0 38.0

TLV1117IDCYR SOT-223 DCY 4 2500 340.0 340.0 38.0

TLV1117IDRJR SON DRJ 8 1000 210.0 185.0 35.0

TLV1117IKTTR DDPAK/TO-263 KTT 3 500 340.0 340.0 38.0

TLV1117IKVURG3 PFM KVU 3 2500 340.0 340.0 38.0

PACKAGE MATERIALS INFORMATION

www.ti.com 1-Dec-2011

Pack Materials-Page 4

MECHANICAL DATA

MPDS094A – APRIL 2001 – REVISED JUNE 2002

POST OFFICE BOX 655303 • DALLAS, TEXAS 75265

DCY (R-PDSO-G4) PLASTIC SMALL-OUTLINE

4202506/B 06/2002

6,30 (0.248)

6,70 (0.264)

2,90 (0.114)

3,10 (0.122)

6,70 (0.264)

7,30 (0.287) 3,70 (0.146)

3,30 (0.130)

0,02 (0.0008)

0,10 (0.0040)

1,50 (0.059)

1,70 (0.067)

0,23 (0.009)

0,35 (0.014)

1 2 3

0,66 (0.026)

0,84 (0.033)

1,80 (0.071) MAX

Seating Plane

0°–10°

Gauge Plane

0,75 (0.030) MIN

0,25 (0.010)

0,08 (0.003)

0,10 (0.004) M

2,30 (0.091)

4,60 (0.181) M

0,10 (0.004)

NOTES: A. All linear dimensions are in millimeters (inches).

B. This drawing is subject to change without notice.

C. Body dimensions do not include mold flash or protrusion.

D. Falls within JEDEC T O-261 Variation AA.

MECHANICAL DATA

MPFM001E – OCTOBER 1994 – REVISED JANUARY 2001

POST OFFICE BOX 655303 • DALLAS, TEXAS 75265

KTE (R-PSFM-G3) PowerFLEX PLASTIC FLANGE-MOUNT

0.360 (9,14)

0.350 (8,89)

0.080 (2,03)

0.070 (1,78)

0.010 (0,25) NOM

0.040 (1,02)

Seating Plane

0.050 (1,27)

0.001 (0,03)

0.005 (0,13)

0.010 (0,25)

NOM

Gage Plane

0.010 (0,25)

0.031 (0,79)

0.041 (1,04)

4073375/F 12/00

NOM

0.350 (8,89)

0.220 (5,59)

0.360 (9,14)

0.295 (7,49)

NOM 0.320 (8,13)

0.310 (7,87)

0.025 (0,63)

0.031 (0,79)

Thermal Tab

(See Note C)

0.004 (0,10)

0.010 (0,25)

0.100 (2,54)

3°–6°

0.410 (10,41)

0.420 (10,67)

0.200 (5,08)

0.365 (9,27)

0.375 (9,52)

NOTES: A. All linear dimensions are in inches (millimeters).

B. This drawing is subject to change without notice.

C. The center lead is in electrical contact with the thermal tab.

D. Dimensions do not include mold protrusions, not to exceed 0.006 (0,15).

E. Falls within JEDEC MO-169

PowerFLEX is a trademark of Texas Instruments.

MECHANICAL DATA

MPSF001F – JANUARY 1996 – REVISED JANUARY 2002

POST OFFICE BOX 655303 • DALLAS, TEXAS 75265

KTP (R-PSFM-G2) PowerFLEX PLASTIC FLANGE-MOUNT PACKAGE

0.228 (5,79)

0.218 (5,54)

0.233 (5,91)

0.243 (6,17)

0.001 (0,02)

0.005 (0,13)

0.070 (1,78)

Seating Plane

0.080 (2,03)

0.010 (0,25) NOM

Gage Plane

0.010 (0,25)

4073388/M 01/02

0.037 (0,94)

0.047 (1,19)

0.247 (6,27)

0.237 (6,02)

NOM

0.215 (5,46)

0.371 (9,42)

0.381 (9,68)

0.090 (2,29)

0.100 (2,54)

0.287 (7,29)

0.031 (0,79)

0.032 (0,81) MAX

0.277 (7,03)

0.025 (0,63)

0.130 (3,30) NOM

0.090 (2,29)

0.180 (4,57) M

0.010 (0,25)

0.004 (0,10)

2°–ā6°

0.040 (1,02)

0.050 (1,27)

Thermal Tab

(See Note C)

0.010 (0,25) NOM

NOTES: A. All linear dimensions are in inches (millimeters).

B. This drawing is subject to change without notice.

C. The center lead is in electrical contact with the thermal tab.

D. Dimensions do not include mold protrusions, not to exceed 0.006 (0,15).

E. Falls within JEDEC T O-252 variation AC.

PowerFLEX is a trademark of Texas Instruments.

IMPORTANT NOTICE

Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, enhancements, improvements and other

changes to its semiconductor products and services per JESD46, latest issue, and to discontinue any product or service per JESD48, latest

issue. Buyers should obtain the latest relevant information before placing orders and should verify that such information is current and

complete. All semiconductor products (also referred to herein as “components”) are sold subject to TI’s terms and conditions of sale

supplied at the time of order acknowledgment.

TI warrants performance of its components to the specifications applicable at the time of sale, in accordance with the warranty in TI’s terms

and conditions of sale of semiconductor products. Testing and other quality control techniques are used to the extent TI deems necessary

to support this warranty. Except where mandated by applicable law, testing of all parameters of each component is not necessarily

performed.

TI assumes no liability for applications assistance or the design of Buyers’ products. Buyers are responsible for their products and

applications using TI components. To minimize the risks associated with Buyers’ products and applications, Buyers should provide

adequate design and operating safeguards.

TI does not warrant or represent that any license, either express or implied, is granted under any patent right, copyright, mask work right, or

other intellectual property right relating to any combination, machine, or process in which TI components or services are used. Information

published by TI regarding third-party products or services does not constitute a license to use such products or services or a warranty or

endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the

third party, or a license from TI under the patents or other intellectual property of TI.

Reproduction of significant portions of TI information in TI data books or data sheets is permissible only if reproduction is without alteration

and is accompanied by all associated warranties, conditions, limitations, and notices. TI is not responsible or liable for such altered

documentation. Information of third parties may be subject to additional restrictions.

Resale of TI components or services with statements different from or beyond the parameters stated by TI for that component or service

voids all express and any implied warranties for the associated TI component or service and is an unfair and deceptive business practice.

TI is not responsible or liable for any such statements.

Buyer acknowledges and agrees that it is solely responsible for compliance with all legal, regulatory and safety-related requirements

concerning its products, and any use of TI components in its applications, notwithstanding any applications-related information or support

that may be provided by TI. Buyer represents and agrees that it has all the necessary expertise to create and implement safeguards which

anticipate dangerous consequences of failures, monitor failures and their consequences, lessen the likelihood of failures that might cause

harm and take appropriate remedial actions. Buyer will fully indemnify TI and its representatives against any damages arising out of the use

of any TI components in safety-critical applications.

In some cases, TI components may be promoted specifically to facilitate safety-related applications. With such components, TI’s goal is to

help enable customers to design and create their own end-product solutions that meet applicable functional safety standards and

requirements. Nonetheless, such components are subject to these terms.

No TI components are authorized for use in FDA Class III (or similar life-critical medical equipment) unless authorized officers of the parties

have executed a special agreement specifically governing such use.

Only those TI components which TI has specifically designated as military grade or “enhanced plastic” are designed and intended for use in

military/aerospace applications or environments. Buyer acknowledges and agrees that any military or aerospace use of TI components

which have not been so designated is solely at the Buyer's risk, and that Buyer is solely responsible for compliance with all legal and

regulatory requirements in connection with such use.

TI has specifically designated certain components which meet ISO/TS16949 requirements, mainly for automotive use. Components which

have not been so designated are neither designed nor intended for automotive use; and TI will not be responsible for any failure of such

components to meet such requirements.

Products Applications

Audio www.ti.com/audio Automotive and Transportation www.ti.com/automotive

Amplifiers amplifier.ti.com Communications and Telecom www.ti.com/communications

Data Converters dataconverter.ti.com Computers and Peripherals www.ti.com/computers

DLP® Products www.dlp.com Consumer Electronics www.ti.com/consumer-apps

DSP dsp.ti.com Energy and Lighting www.ti.com/energy

Clocks and Timers www.ti.com/clocks Industrial www.ti.com/industrial

Interface interface.ti.com Medical www.ti.com/medical

Logic logic.ti.com Security www.ti.com/security

Power Mgmt power.ti.com Space, Avionics and Defense www.ti.com/space-avionics-defense

Microcontrollers microcontroller.ti.com Video and Imaging www.ti.com/video

RFID www.ti-rfid.com

OMAP Applications Processors www.ti.com/omap TI E2E Community e2e.ti.com

Wireless Connectivity www.ti.com/wirelessconnectivity

Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265