TCMT1100 Series, TCMT4100 Series www.vishay.com Vishay Semiconductors Optocoupler, Phototransistor Output, Single/Quad Channel, Half Pitch Mini-Flat Package FEATURES * Low profile package (half pitch) * AC isolation test voltage 3750 VRMS * Low coupling capacitance of typical 0.3 pF * Current transfer ratio (CTR) selected into groups * Low temperature coefficient of CTR 16467-6 * Wide ambient temperature range C * Compliant to RoHS Directive 2002/95/EC and in accordance to WEEE 2002/96/EC E 9 APPLICATIONS * Programmable logic controllers 1 2 A C 4 PIN * Modems 8 * Answering machines * General applications 16 PIN AGENCY APPROVALS * UL1577, file no. E76222 system code M, double protection DESCRIPTION The TCMT1100 series consist of a phototransistor optically coupled to a gallium arsenide infrared-emitting diode in a 4 pin (single channel) up to 16 pin (quad channel) package. * cUL CSA 22.2 bulletin 5A, double protection The elements are mounted on one leadframe providing a fixed distance between input and output for highest safety requirements. * FIMKO: FI EN 60950-1:2006 * DIN EN 60747-5-2 (VDE 0884) DIN EN 60747-5-5 (pending) * BSI: BS EN60065:2002 BS EN60950-1:2006 ORDERING INFORMATION SOP-# T C M T # 1 0 # PART NUMBER 7 mm CTR (%) AGENCY CERTIFIED/PACKAGE SINGLE CHANNEL DUAL CHANNEL 5 mA UL, cUL, FIMKO, BSI, VDE 50 to 600 SOP-4, single channel TCMT1100 SOP-16 TCMT4100 SOP-16, quad channel TCMT4100T0 (1) 10 mA 40 to 80 5 mA 63 to 125 100 to 200 160 to 320 50 to 150 100 to 300 80 to 160 130 to 260 200 to 400 TCMT1101 TCMT1102 TCMT1103 TCMT1104 TCMT1105 TCMT1106 TCMT1107 TCMT1108 TCMT1109 - - - - - TCMT4106 - - - - - - - - - - - - Notes * Available only on tape and reel. (1) Product is rotated 180 in tape and reel cavity. Rev. 2.7, 31-Jan-12 Document Number: 83510 1 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 TCMT1100 Series, TCMT4100 Series www.vishay.com Vishay Semiconductors ABSOLUTE MAXIMUM RATINGS (Tamb = 25 C, unless otherwise specified) PARAMETER TEST CONDITION SYMBOL VALUE UNIT INPUT Reverse voltage VR 6 V Forward current IF 60 mA Forward surge current tp 10 s IFSM 1.5 A Pdiss 100 mW Tj 125 C Collector emitter voltage VCEO 70 V Emitter collector voltage VECO 7 V mA Power dissipation Junction temperature OUTPUT Collector current Collector peak current tp/T = 0.5, tp 10 ms Power dissipation Junction temperature IC 50 ICM 100 mA Pdiss 150 mW Tj 125 C VISO 3750 VRMS COUPLER AC isolation test voltage (RMS) Related to standard climate 23/50 DIN 50014 Total power dissipation Ptot 250 mW Operating ambient temperature range Tamb - 40 to + 100 C Storage temperature range Tstg - 40 to + 125 C Soldering temperature (1) Tsld 260 C Notes * Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. Functional operation of the device is not implied at these or any other conditions in excess of those given in the operational sections of this document. Exposure to absolute maximum ratings for extended periods of the time can adversely affect reliability. (1) Wave soldering three cycles are allowed. Also refer to "Assembly Instructions" (www.vishay.com/doc?80054). ELECTRICAL CHARACTERISTICS (Tamb = 25 C, unless otherwise specified) PARAMETER TEST CONDITION SYMBOL IF = 50 mA VR = 0, f = 1 MHz MIN. TYP. MAX. VF 1.25 1.6 Cj 50 UNIT INPUT Forward voltage Junction capacitance V pF OUTPUT Collector emitter voltage IC = 100 A VCEO 70 Emitter collector voltage IE = 100 A VECO 7 VCE = 20 V, IF = 0 A ICEO 100 nA Collector emitter saturation voltage IF = 10 mA, IC = 1 mA VCEsat 0.3 V Cut-off frequency VCE = 5 V, IF = 10 mA, RL = 100 fc 100 kHz f = 1 MHz Ck 0.3 pF Collector dark current V V COUPLER Coupling capacitance Note * Minimum and maximum values are testing requirements. Typical values are characteristics of the device and are the result of engineering evaluation. Typical values are for information only and are not part of the testing requirements. Rev. 2.7, 31-Jan-12 Document Number: 83510 2 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 TCMT1100 Series, TCMT4100 Series www.vishay.com Vishay Semiconductors CURRENT TRANSFER RATIO (Tamb = 25 C, unless otherwise specified) PARAMETER TEST CONDITION PART SYMBOL MIN. VCE = 5 V, IF = 5 mA TCMT1100 CTR 50 TCMT1101 CTR TCMT1102 CTR TCMT1103 VCE = 5 V, IF = 10 mA IC/IF VCE = 5 V, IF = 5 mA TYP. MAX. UNIT 600 % 40 80 % 63 125 % CTR 100 200 % % TCMT1104 CTR 160 320 TCMT1105 CTR 50 150 % TCMT1106 CTR 100 300 % TCMT1107 CTR 80 160 % TCMT1108 CTR 130 260 % TCMT1109 CTR 200 400 % TCMT4100 CTR 50 600 % TCMT4106 CTR 100 300 % SWITCHING CHARACTERISTICS (Tamb = 25 C, unless otherwise specified) PARAMETER TEST CONDITION SYMBOL Delay time VS = 5 V, IC = 2 mA, RL = 100 , (see figure 1) td 3 s Rise time VS = 5 V, IC = 2 mA, RL = 100 , (see figure 1) tr 3 s Fall time VS = 5 V, IC = 2 mA, RL = 100 , (see figure 1) tf 4.7 s Storage time VS = 5 V, IC = 2 mA, RL = 100 , (see figure 1) ts 0.3 s Turn-on time VS = 5 V, IC = 2 mA, RL = 100 , (see figure 1) ton 6 s Turn-off time VS = 5 V, IC = 2 mA, RL = 100 , (see figure 1) toff 5 s Turn-on time VS = 5 V, IF = 10 mA, RL = 1 k, (see figure 2) ton 9 s Turn-off time VS = 5 V, IF = 10 mA, RL = 1 k, (see figure 2) toff 18 s IF +5V IF 0 MIN. IF I C = 2 mA; adjusted through input amplitude R G = 50 tp = 0.01 T TYP. MAX. UNIT +5V I F = 10 mA 0 IC R G = 50 tp = 0.01 T t p = 50 s t p = 50 s Channel I Channel II 50 Channel I Oscilloscope R L = 1 M C L = 20 pF Channel II 100 50 Oscilloscope R L 1 M C L 20 pF 1 k 95 10843 95 10804 Fig. 1 - Test Circuit, Non-Saturated Operation Rev. 2.7, 31-Jan-12 Fig. 2 - Test Circuit, Saturated Operation Document Number: 83510 3 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 TCMT1100 Series, TCMT4100 Series www.vishay.com Vishay Semiconductors IF 0 tp IC t 100 % 90 % 10 % 0 tr td tp td tr t on (= td + tr) Pulse duration Delay time Rise time Turn-on time t tf t off ts t on ts tf t off (= ts + tf) Storage time Fall time Turn-off time 96 11698 Fig. 3 - Switching Times SAFETY AND INSULATION RATINGS PARAMETER TEST CONDITION Climatic classification SYMBOL MIN. CTI 175 IEC 68 part 1 TYP. MAX. UNIT 40/110/21 Comparative tracking index 399 VIOTM 6000 V VIORM 707 V PSO 265 mW ISI 130 mA TSI 150 Creepage distance 5 Clearance distance Insulation thickness, reinforced rated per IEC60950 2.10.5.1 C mm 5 mm 0.4 mm Note * As per IEC 60747-5-2, 7.4.3.8.1, this optocoupler is suitable for "safe electrical insulation" only within the safety ratings. Compliance with the safety ratings shall be ensured by means of protective circuits. 300 1000 Coupled device IF - Forward Current (mA) Ptot - Total Power Dissipation (mW) TYPICAL CHARACTERISTICS (Tamb = 25 C, unless otherwise specified) 250 200 Phototransistor 150 IR-diode 100 50 0 10 1 0.1 0 96 11700 100 40 80 120 Tamb - Ambient Temperature (C) Fig. 4 - Total Power Dissipation vs. Ambient Temperature Rev. 2.7, 31-Jan-12 0 96 11862 0.4 0.8 1.2 1.6 2.0 VF - Forward Voltage (V) Fig. 5 - Forward Current vs. Forward Voltage Document Number: 83510 4 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 TCMT1100 Series, TCMT4100 Series Vishay Semiconductors 2.0 100 VCE = 5 V IF = 5 mA 1.5 1.0 0.5 0 - 25 25 50 5 mA 2 mA 1 1 mA 0.1 1 100 10 VCE - Collector Emitter Voltage (V) 95 10985 Fig. 9 - Collector Current vs. Collector Emitter Voltage 1.0 10 000 VCE = 20 V IF = 0 VCEsat - Collector Emitter Saturation Voltage (V) 1000 20 % used 100 10 0.8 CTR = 50 % used 0.6 0.4 0.2 10 % used 0 1 0 25 50 75 100 Tamb - Ambient Temperature (C) 95 11026 VCE = 5 V 10 1 0.1 95 11027 1 10 100 IF - Forward Current (mA) Fig. 8 - Collector Current vs. Forward Current Rev. 2.7, 31-Jan-12 100 10 IC - Collector Current (mA) Fig. 10 - Collector Emitter Saturation Voltage vs. Collector Current CTR - Current Transfer Ratio (%) 100 0.01 0.1 1 95 11028 Fig. 7 - Collector Dark Current vs. Ambient Temperature IC - Collector Current (mA) 10 mA 10 75 Fig. 6 - Relative Current Transfer Ratio vs. Ambient Temperature ICEO - Collector Dark Current, with Open Base (nA) 20 mA IF = 50 mA 0.1 0 Tamb - Ambient Temperature (C) 95 11025 IC - Collector Current (mA) CTRrel - Relative Current Transfer Ratio www.vishay.com 1000 VCE = 5 V 100 10 1 0.1 95 11029 1 10 100 IF - Forward Current (mA) Fig. 11 - Current Transfer Ratio vs. Forward Current Document Number: 83510 5 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 TCMT1100 Series, TCMT4100 Series Vishay Semiconductors 50 ton/toff- Turn-on /Turn-off Time (s) ton/toff - Turn-on/Turn-off Time (s) www.vishay.com Saturated operation VS = 5 V RL = 1 k 40 30 toff 20 10 ton 0 0 95 11031 5 10 20 15 10 8 Non-saturated operation VS = 5 V RL = 100 ton 6 toff 4 2 0 2 0 IF - Forward Current (mA) Fig. 12 - Turm-on/off Time vs. Forward Current 4 6 8 IC - Collector Current (mA) 95 11030 Fig. 13 - Turn-on/off Time vs. Collector Current PACKAGE DIMENSIONS in millimeters + 0.3 7 - 0.4 4.4 0.2 + 0.3 0.7 - 0.4 0.45 0.1 1.27 nom. 4 5 1.9 0.1 0.1 2.5 0.15 +- 0.10 0.0 2.1 max. 2.8 max. 3 1.27 0.9 Possible footprint 5 7.6 1 2 Pin no. 1 identification technical drawings according to DIN specifications 16283 Rev. 2.7, 31-Jan-12 Document Number: 83510 6 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 TCMT1100 Series, TCMT4100 Series Vishay Semiconductors 7 10.12 4.4 + 0.3 - 0.4 0.2 0.45 0.1 + 0.3 - 0.4 0.15 0.7 + 0.10 - 0.05 0.1 0.1 10.4 max. 1.9 2.1 max. www.vishay.com 1.27 nom. Possible footprint 7 x 1.27 = 8.89 15 14 13 12 11 10 9 1 2 3 4 5 6 7 8 1.27 0.9 8.89 16 5 Pin no. 1 identification 7.6 Drawing-No.: 6.544-5330.03-4 technical drawings according to DIN specifications Issue: 1; 04.04.00 15226 PACKAGE MARKING (example) MT1100 TCMT4100 V YWW M 68 V YWW M 68 21764-10 21764-11 Rev. 2.7, 31-Jan-12 Document Number: 83510 7 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000