J & K Series Thru Hole LEDs J Series, Blue Clear and Diffused, Water Clear LED, 2351 Series Small Flange T-1, 3mm Round The J series lamps are made with AlInGaP chips which can be used for standard brightness at low current (2mA) or super brightness at standard current (20mA). This package is compatible with our extensive line of T 1 indicators. The Blue LEDs are made with GaN/SiC (428nM) and InGaN/SiC (468nM) chips. Blue should only be used when this colors are necessary for the application and higher cost is acceptable. Anode 3.0.2 2.54 1.0.2 3.15 0.5 typ 1.0 min 26.4 min 4.5.3 2351 Series GENERAL INFORMATION Operating Temperature Range Storage Temperature Range Reflow Soldering Temperature -30 C to +85 C -55 C to +100 C 260 C for 5 sec max APPLICATION INFORMATION (ALL RATINGS AT 25 C AMBIENT) Peak Part No. Emitted Color Absolute Maximum Ratings Pd If (mA) Ir E/O Characteristics Iv (mcd) @If=20mA Vr Vf (V) @ If=20mA 21/2 (nM) (nM) (mW) dc 1/10 duty @ 1 khz @Vr=5V (A) (V) 2mA Min Typ Min Typ (Deg) JRC2351 Red 632 20 60 25 160 10 5 6 40 110 2.0 2.4 40 JGC2351 Green 575 20 60 25 160 10 5 3 40 50 2.0 2.4 40 JYC2351 Yellow 591 15 60 25 160 10 5 7 50 130 2.0 2.4 40 JOC2351 Orange 621 18 60 25 160 10 5 7 50 130 2.0 2.4 40 JEC2351 Red 639 20 60 25 160 10 5 5 40 80 2.0 2.4 40 JYOC2351 YelOrng 611 17 60 25 160 10 5 7 50 130 2.0 2.4 40 IUBC2351 Blue 428 65 140 25 70 50 5 - 63 100 3.8 4.5 40 IUBC2351-7 Blue 468 26 120 25 - 50 5 - 150 300 3.5 4.0 40 IUBD2351 BlueDiff 428 65 140 25 70 10 5 - 8 12 3.8 4.5 60 Specifications subject to change without notice. Dimensions are in mm0.3 unless stated otherwise. IDEA, Inc., 1300-B Pioneer St., Brea, CA 92821 Ph:562-697-4332, 800-LED-IDEA; Fax: 562-690-1352 J-20