Characteristics - Electrical
HBA HB1 HB3
Power Dissipation - Power @ 20°C (W): 0.8 2.0 4.0
@ 70°C: 0.4 1.0 2.0
Ohmic Value - Min (Ohms): 1K 10K 10K
Max: 120M 1G 1G
Resistance Tolerance (%) (Tighter By Request): 1%, 2%, 5% 1%, 2%, 5% 1%, 2%, 5%
Maximum Working Voltage - DC or ACrms (Volts): 1kV 7.5kV 15kV
Insulation Resistance - Epoxy Coated, @500V dc (Ohms): >106MΩ >106MΩ >106MΩ
Load Stability - 1000hr’s @ 70°C (%): ±0.5% ±0.5% ±0.5%
Temp. Rapid Change - -55°C to 125°C for 5 cycles (ΔR): ±0.1% ±0.1% ±0.1%
Endurance - 1000 Hours @ 200°C (ΔR): <=2% <=2% <=2%
Resistance to Soldering Heat - 350°C for 3.5seconds (ΔR): 0.05% 0.05% 0.05%
Temperature Coefficient (ppm/°C): ±100ppm/°C ±100ppm/°C ±100ppm/°C
(±20ppm/°C available to special order)
Voltage Coefficient:
Negligible up to 100K Negligible up to 200K
Increasing to 0.02ppm/Volt at 800K Increasing to
0.01ppm/Volt at 1M0
Increasing to 1.0ppm/Volt at 5M0 Increasing to
1.0ppm/Volt at 10M
Increasing to 2.0ppm/Volt at 50M Increasing to
2.0ppm/Volt at 100M
Increasing to 8.0ppm/Volt at 1000M Increasing to
8.0ppm/Volt at 1000M
Ambient Temperature Range (°C): -55 to 125 -55 to 125 -55 to 125
Long Term Damp Heat (%): 0.25% 0.25% 0.25%
(Steady state 56 Days 95% RH at 40°C)
Noise (Quantech) Dependent -20dB (0.1μ V/V) at lower values
on Resistor Type and Value: +10dB (3.3μ V/V) at higher values
Encapsulation: Epoxy coating (Optional)
Solvent Resistance: Print will withstand the action of all
commonly used industrial solvents.
Lead Material: Tinned copper wire
Lead Length: Minimum 20mm
Lead Diameter: Nominal 0.6 ± 0.05mm
High Value / High Voltage Resistors
Type HB Series
1773310 CIS BI 06/2011 Dimensions are in millimeters Dimensions are shown for For email, phone or live chat, go to: te.com/help
and inches unless otherwise reference purposes only.
specified. Values in brackets Specifications subject
are standard equivalents. to change.
Key Features
IUp to 15kV Element
Voltage
•Unique specification
for the most deman-
ding applications
IHigh Ratio of Size
to Power
•The solution to your
PCB population
problems
I1kW to 1GW
•Coupled with 1%
tolerance gives
ultimate design
flexibility
IEstablished Product
with Proven Reliability
ILow Inductance
•For the fastest
switching speeds
Applications
IHigh Voltage
IVoltage Divider
ISurge
IFilter
IBalancing
IInrush Limiting
TE Connectivity (TE) is a leading supplier of standard and custom designed high
value/high voltage resistors for high voltage, industrial, control, medical and
general-purpose use. The HB is a tough epoxy coated high voltage resistor, with axial or
radial leads, values up to 1G Ohm and an operational voltage to 20kV as standard and
30kV to order. The resistors are made from quality materials for optimum reliability and
stability. TE can test resistors to conform to relevant international, MIL or customer
specifications. TE is happy to advise on the use of resistors for high frequency
applications and to supply information for high voltage use.
0 20 40 60 80 100 120 140
4.5
4
3.5
3
2.5
2
1.5
1
0.5
0
Power (W)
Ambient Temperature (degC)
HB3
HB1
HBA
How to Order
HB 3 1K0 J Z R E
Common Part
HB- High Value /
High Voltage
Resistor
Power Rating
@ 70°C
A - 0.4W
1 - 1.0W
3 - 2.0W
Resistance Value
1Kohm
(1000Ω)
1K0
1Mohm
(1000000Ω)
1M0
Tolerance
F - 1%
G - 2%
J - 5%
Temp. Coefficient
of Resistance
Z - 100ppm
Lead Style
R - Radial Leads
A - Axial Leads
(HB1, HB3 only for
Axial Leads)
Coating Styles
E - Epoxy
Blue Coating
Surface Temperature Rise
Derating Curve
0 0.5 1 1.5 2 2.5 3 3.5 4
100
90
80
70
60
50
40
30
20
10
0
Surface Temp. Rise (°C)
Power Dissipation (Watts)
HB3
HB1
HBA
High Value / High Voltage Resistors
Type HB Series
TE Connectivity, TE connectivity (logo) and TE (logo) are trademarks.
Other logos, product and Company names mentioned herein may be trademarks of their respective owners.
While TE has made every reasonable effort to ensure the accuracy of the information in this datasheet, TE does not guarantee that it is error-free, nor does TE make any other
representation, warranty or guarantee that the information is accurate, correct, reliable or current. TE reserves the right to make any adjustments to the information contained herein
at any time without notice. TE expressly disclaims all implied warranties regarding the information contained herein, including, but not limited to, any implied warranties of merchantabili-
ty or fitness for a particular purpose. The dimensions in this datasheet are for reference purposes only and are subject to change without notice. Specifications are subject to change
without notice. Consult TE for the latest dimensions and design specifications.
Dimensions -
Type HBA, HB1 & HB3 (Radial) Type HB1 & HB3 (Axial)
Type A B C D E F G H I
HBA Uncoated 10.2 7 1.75 60.2 5.0 – – – –
Epoxy Coated 12.5 8 2.6 60.5 5.0 – – – –
HB1 Uncoated 8.4 26 1.5 33.8 22.9 26 66 1.5 8.4
Epoxy Coated 10.4 26.5 3.0 35.8 22.9 26.3 66 3 9.2
HB3 Uncoated 8.4 51.1 1.5 33.8 48.3 51.1 91.1 1.5 8.4
Epoxy Coated 10.4 52 3.0 35.8 48.3 53.5 91.1 3 9.6
F
G
H
D
B
E
C
A