7-3
400 TO 1500 WATT UNIPOLAR
FLIP-DIE SPECIFICATIONS
♦Exclusive Sussex Semiconductor Flip-Die T echnology
♦Each Die Fully Glass Passivated: Needs No
Encapsulation
♦Space Saving Substitute For SMA, SMB, and SMC
Packages
♦Electrical Equivalent to P4KE, P6KE, SA, and 1.5KE
Series Axial Leaded Devices
♦Unipolar
♦Each Device Individually Inspected
♦Available in Waffle Packs or Tape and Reel
♦Operating Temperature: -65 to 150ºC
♦Storage Temperature: -65 to 175ºC
♦Metallization: Ni-Ni-Au
♦Polarity:
GLASS PASSIVATED SURFACE MOUNT UNIPOLAR FLIP-DIE
400 TO 5000 WATT MAXIMUM POWER HANDLING
REVERSE VOLTAGES - 6.8 TO 440 VOLTS
CUSTOM ORDERING SPECIFIER
SZUFD - - -
DIE SPECIFICATIONS
UNIPOLAR TRANSIENT
SUPPRESSOR FLIP-DIE
CLAMPING VOLT AGE
REVERSE BREAKDOWN
VOLTAGE (VBR)
6.8 to 10 Breakdown Volts (VBR) 11 to 440 Breakdown Volts (VBR)
A-Cathode A-Anode
B-Anode B-Cathode
CONTACT F ACTORY FOR ELECTRICAL
SPECIFICATIONS ON CUST OM PARTS
HIGHER POWER
RATINGS A V AILABLE.
CONTACT FACT ORY FOR
DIE SPECIFICATIONS
AVAILABLE SIZES
CODE RATING
1.5 400 W ATTS PAGE 7-5,7-6
2 500 W ATTS PA GE 7-8,7-9
3 600 W ATTS PA GE 7-11,7-12
16 1500 W ATTS PA GE 7-14,7-15
STANDARD P ART
LISTING ON PAGE:
‘A’-SIDE METALLIZA TION
CODE MATERIAL
A ALUMINUM
E GOLD
BLANK NI-NI-AU
(STANDARD)
%TOLERANCE OF VBR
TOLERANCES
CODE TOLERANCE
5 ±5%
10 ±10%
20 ±20%
S IZE CO DE C D E F G
FD1.5 0.055 0.040 0.020 0.083 0.015
FD2 0.070 0.055 0.027 0.105 0.015
FD3 0.085 0.070 0.033 0.120 0.015
FD16 0.115 0.100 0.050 0.173 0.015
TABLE 3A - FLIP-DIE DIMENSION SPECIFICATIONS
♦ ALL TOLERAN CES ARE ± .005" ♦ ALL DIMENSIONS ARE IN INCHES
12251 TOWNE LAKE DRIVE, FORT MYERS, FLORIDA, 33913 TEL: (941) 768-6800 FAX: (941) 768-6868
SUSSEX
SEMICONDUCTOR, INC.
400 TO 1500 WATT UNIPOLAR
TRANSIENT SUPPRESSOR FLIP-
DIE
7-4
CUSTOM ORDERING SPECIFIER
SZZD - - -
DIE SPECIFICATIONS
GLASS PASSIVATED SURFACE MOUNT BIPOLAR DUAL-DIE
400 TO 5000 WATT MAXIMUM POWER HANDLING
REVERSE VOLTAGES - 6.8 TO 440 VOLTS
400 TO 1500 WA TT BIPOLAR
DUAL-DIE SPECIFICA TIONS
♦Exclusive Sussex Semiconductor Dual-Die
Technology
♦Each Die Fully Glass Passivated: Needs No
Encapsulation
♦Space Saving Substitute For SMA, SMB, and SMC
Packages
♦Electrical Equivalent to P4KE, P6KE, SA, and 1.5KE
Series Axial Leaded Devices
♦Bipolar
♦Each Device Individually Inspected
♦Available in Waffle Packs or Tape and Reel
♦Operating Temperature: -65 to 150ºC
CLAMPING VOLT AGE
%TOLERANCE OF VBR
♦Storage Temperature: -65 to 175ºC
♦Metallization: Ni-Ni-Au
♦Polarity:
6.8 to 10 Breakdown Volts (VBR) 11 to 440 Breakdown Volts (VBR)
A-Cathode A-Anode
B-Anode B-Cathode
REVERSE BREAKDOWN
VOLTAGE (VBR) (NOTE 1)
TOLERANCES
CODE
TOLERANCE
5 ±5%
10 ±10%
20 ±20%
BIPOLAR TRANSIENT
SUPPRESSOR
DUAL DIE
CONTACT F ACTOR Y FOR ELECTRICAL
SPECIFICATIONS ON CUSTOM PARTS
NOTE 1: ♦ DUAL DIE VBR IS MEASURED FROM A TO A.
VBR MEASURED FROM A T O B WILL RESULT IN A
LO WER VBR. CONTACT THE FACTORY FOR
SPECIFIC INFORMATION.
NOTES
HIGHER POWER
RATINGS A V AILABLE.
CONT A CT FACT ORY FOR
DIE SPECIFICATIONS
AVAILABLE SIZES
CODE RATING
1.5 400 W ATTS PAGE 7-5,7-6
2 500 W ATTS PA GE 7-8,7-9
3 600 W ATTS PA GE 7-11,7-12
16 1500 W ATTS PA GE 7-14,7-15
STANDARD P ART
LISTING ON PAGE:
‘A’-SIDE MET ALLIZATION
CODE MATERIAL
A ALUMINUM
E GOLD
BLANK NI-NI-AU
(STANDARD)
SI Z E CODE C D E F
D1.5 0.055 0.040 0.110 0.015
D2 0.070 0.055 0.140 0.015
D3 0.085 0.070 0.160 0.015
D16 0.115 0.100 0.230 0.015
T ABL E 4A - DUAL -DIE DI MENSI O N SPECIFICATIONS
♦ALL TOLERANCES ARE ± .005" ♦ALL DIMENSIONS ARE IN INC H ES
12251 TOWNE LAKE DRIVE, FORT MYERS, FLORIDA, 33913 TEL: (941) 768-6800 FAX: (941) 768-6868
SUSSEX
SEMICONDUCTOR, INC.
400 TO 1500 WATT BIPOLAR
TRANSIENT SUPPRESSOR
DUAL-DIE
NOTES
NOTE 1::
::
:♦ELECTRICAL CHARACTERISTICS ARE AT A JUNCTION TEMPERATURE (TJ) OF 25°C
NOTE 2: ♦INDUSTRY STANDARD PAR T NUMBERS REFER TO PACKA GED DEVICES. THE DIES
INDICATED BY THESE NUMBERS , IF PROPERLY PACKA GED , WILL OPERATE WITH THE
SAME PERFORMANCE
NOTE 3: ♦FOR BIPOLAR DEVICES WITH A VBR OF 10 VOLTS OR LESS, THE IR LIMIT IS
DOUBLED
NOTE 4: ♦DUAL DIE VBR IS MEASURED FROM TOP TO TOP OF DIE. VBR
MEASURED FROM T OP T O BO TT OM WILL RESUL T IN A LOWER VBR
NOTE 5: ♦SURGE CURRENT WAVEFORM SHO WN IN FIGURE 2A ON PAGE 7-7
♦PEAK PULSE PO WER DERATING SHOWN IN FIGURE 3A ON PAGE 7-7
THIS T ABLE CONTINUES
7-5
( N O T E 2 )
400 W A T T
P4KE
SERIES
SU SSEX
ORDER
CODE STANDOFF
VOLTAGE
(VSO)
Volts
MAX.
REVERSE
LEAKAGE
(IR)@VSO
( N OT E 3 )
µA MIN.
Volts MAX.
Volts
TEST
CURRENT
(IT)
mA VCL
Volts IP P
Amps
MAX. TEMP.
COEFFICIENT
OF VBR
(
%/°C
)
P4KE6.8 6.8-10.8-10 5.50 1000 6.12 7.48 10 10.8 38.0 0.057
P4KE6.8A 6.8-10.5-5 5.80 1000 6.45 7.14 10 10.5 40.0 0.057
P4KE7.5 7.5-11.7-10 6.05 500 6.75 8.25 10 11.7 35.0 0.061
P4KE7.5A 7.5-11.3-5 6.40 500 7.13 7.88 10 11.3 37.0 0.061
P4KE8.2 8.2-12.5-10 6.63 200 7.38 9.02 10 12.5 33.0 0.065
P4KE8.2A 8.2-12.1-5 7.02 200 7.79 8.61 10 12.1 34.0 0.065
P4KE9.1 9.1-13.8-10 7.37 50 8.19 10.00 1 13.8 30.0 0.068
P4KE9.1A 9.1-13.4-5 7.78 50 8.65 9.55 1 13.4 31.0 0.068
P4KE10 10-15.0-10 8.10 10 9.00 11.00 1 15.0 28.0 0.073
P4KE10A 10-14.5-5 8.55 10 9.50 10.50 1 14.5 29.0 0.073
P4KE11 11-16.2-10 8.92 5.0 9.90 12.10 1 16.2 26.0 0.075
P4KE11A 11-15.6-5 9.40 5.0 10.50 11.60 1 15.6 27.0 0.075
P4KE12 12-17.3-10 9.72 5.0 10.80 13.20 1 17.3 24.0 0.078
P4KE12A 12-16.7-5 10.20 5.0 11.40 12.60 1 16.7 25.0 0.078
P4KE13 13-19.0-10 10.50 5.0 11.70 14.30 1 19.0 22.0 0.061
P4KE13A 13-18.2-5 11.10 5.0 12.40 13.70 1 18.2 23.0 0.081
P4KE15 15-22.0-10 12.10 5.0 13.50 16.50 1 22.0 19.0 0.084
P4KE15A 15-21.2-5 12.80 5.0 14.30 15.80 1 21.2 20.0 0.084
P4KE16 16-23.5-10 12.90 5.0 14.40 17.60 1 23.5 17.8 0.086
P4KE16A 16-22.5-5 13.60 5.0 15.20 16.80 1 22.5 18.6 0.086
P4KE18 18-26.5-10 14.50 5.0 16.20 19.80 1 26.5 16.0 0.088
P4KE18A 18-25.2-5 15.30 5.0 17.10 18.90 1 25.2 16.5 0.088
P4KE20 20-29.1-10 16.20 5.0 18.00 22.00 1 29.1 14.0 0.090
P4KE20A 20-27.7-5 17.10 5.0 19.00 21.00 1 27.7 15.0 0.090
P4KE22 22-31.9-10 17.80 5.0 19.80 24.20 1 31.9 13.0 0.092
P4KE22A 22-30.6-5 18.80 5.0 20.90 23.10 1 30.6 13.7 0.092
P4KE24 24-34.7-10 19.40 5.0 21.60 26.40 1 34.7 12.0 0.091
P4KE24A 24-33.2-5 20.50 5.0 22.80 25.20 1 33.2 12.6 0.094
P4KE27 27-39.1-10 21.80 5.0 24.30 29.70 1 39.0 10.7 0.096
P4KE27A 27-37.5-5 23.10 5.0 25.70 28.40 1 37.5 11.0 0.096
P4KE30 30-43.5-10 24.30 5.0 27.00 33.00 1 43.5 9.6 0.097
P4KE30A 30-41.4-5 25.60 5.0 28.50 31.50 1 41.4 10.0 0.097
P4KE33 33-47.7-10 26.80 5.0 29.70 36.30 1 47.7 8.8 0.098
P4KE33A 33-45.7-5 28.20 5.0 31.40 34.70 1 45.7 9.0 0.098
P4KE36 36-52.0-10 29.10 5.0 32.40 39.60 1 52.0 8.0 0.099
P4KE36A 36-49.9-5 30.80 5.0 34.20 37.80 1 49.9 8.4 0.099
P4KE39 39-56.4-10 31.60 5.0 35.10 42.90 1 56.4 7.4 0.100
P4KE39A 39-53.9-5 33.30 5.0 37.10 41.00 1 53.9 7.7 0.100
P4KE43 43-61.9-10 34.80 5.0 38.70 47.30 1 61.9 6.7 0.101
P4KE43A 43-59.3-5 36.80 5.0 40.90 45.20 1 59.3 7.0 0.101
P4KE47 47-67.8-10 38.10 5.0 42.30 51.70 1 67.8 6.2 0.101
P4KE47A 47-64.8-5 40.20 5.0 44.70 49.40 1 64.8 6.4 0.101
P4KE51 51-70.1-10 41.30 5.0 45.90 56.10 1 73.5 5.7 0.102
TAB L E 5A - 400 W ATT TRAN SIE NT S U P P RE S S OR D IE E L EC TRICAL S P EC IF IC ATION S (NOT E 1)
LOOS E LIP S
SINK
SHIPS!
MAX . CLAMP ING
V O LTAG E (VCL) @
P E AK P ULSE CURRE NT
(IPP) (N OT E 5)
REVERSE
BREAKDOW N
VOLTAGE
(VBR) @ IT
(NOT E 4)
INDU S T R Y
STANDARD
PAR T
NUMBERS
REFER T O
PAGE7-7 FOR
OR DER
S PE CIF IE R
12251 TOWNE LAKE DRIVE, FORT MYERS, FLORIDA, 33913 TEL: (941) 768-6800 FAX: (941) 768-6868
SUSSEX
SEMICONDUCTOR, INC.
400 WATT TRANSIENT
SUPPRESSOR
DIE SPECIFICATIONS
7-6
NOTES
NOTE 1::
::
:♦ELECTRICAL CHARACTERISTICS ARE AT A JUNCTION TEMPERATURE (TJ) OF 25°C
NOTE 2: ♦INDUSTR Y STANDARD PAR T NUMBERS REFER TO PACKA GED DEVICES. THE DIES
INDICA TED BY THESE NUMBERS , IF PROPERLY P A CKA GED , WILL OPERATE WITH THE
SAME PERFORMANCE
NOTE 3: ♦FOR BIPOLAR DEVICES WITH A VBR OF 10 V OLTS OR LESS, THE IR LIMIT IS
DOUBLED
NOTE 4: ♦DUAL DIE VBR IS MEASURED FROM TOP TO TOP OF DIE VBR
MEASURED FROM TOP TO BOTTOM WILL RESULT IN A LOWER VBR
NOTE 5: ♦SURGE CURRENT WA VEFORM SHO WN IN FIGURE 1A ON PA GE 7-7
♦PEAK PULSE POWER DERATING SHOWN IN FIGURE 2A ON PAGE 7-7
( N O T E 2 )
400 W A T T
P4KE
SERIES
SU SSEX
ORDER
CODE STANDOFF
VOL TA GE
(VSO)
Volts
MAX.
REVERSE
LEAKAGE
(IR)@VSO
( N O T E 3 )
µA MIN.
Volts MAX.
Volts
TEST
CURRENT
(IT)
mA VCL
Volts IPP
Amps
MAX. TEMP.
COEFFICIENT
OF VBR
(
%/°C
)
P4KE51A 51-70.1-5 43.60 5.0 48.50 53.60 1 70.1 6.0 0.102
P4KE56 56-80.5-10 45.40 5.0 50.40 61.60 1 80.5 5.2 0.103
P4KE56A 56-77.0-5 47.80 5.0 53.20 58.80 1 77.0 5.4 0.103
P4KE62 62-89.0-10 50.20 5.0 55.80 68.80 1 89.0 4.7 0.104
P4KE62A 62-85.0-5 53.00 5.0 58.90 65.10 1 85.0 5.0 0.104
P4KE68 68-96.0-10 55.10 5.0 61.20 74.80 1 96.0 4.2 0.104
P4KE68A 68-92.0-5 58.10 5.0 64.60 71.40 1 92.0 4.5 0.104
P4KE75 75-108.0-10 60.70 5.0 67.50 82.50 1 108.0 3.8 0.105
P4KE75A 75-103.0-5 64.10 5.0 71.30 78.80 1 103.0 4.0 0.105
P4KE82 82-118.0-10 66.40 5.0 73.80 90.20 1 118.0 3.5 0.105
P4KE82A 82-113.0-5 70.10 5.0 77.90 86.10 1 113.0 3.7 0.105
P4KE91 91-131.0-10 73.70 5.0 81.90 100.00 1 131.0 3.2 0.106
P4KE91A 91-125.0-5 77.80 5.0 86.50 95.50 1 125.0 3.3 0.106
P4KE100 100-144.0-10 81.00 5.0 90.00 110.00 1 144.0 2.9 0.106
P4KE100A 100-137.0-5 85.50 5.0 95.00 105.00 1 137.0 3.0 0.106
P4KE110 110-158.0-10 89.20 5.0 99.00 121.00 1 158.0 2.6 0.107
P4KE110A 110-152.0-5 94.00 5.0 105.00 116.00 1 152.0 2.7 0.107
P4KE120 120-173.0-10 97.20 5.0 108.00 132.00 1 173.0 2.4 0.107
P4KE120A 120-165.0-5 102.00 5.0 114.00 126.00 1 165.0 2.5 0.107
P4KE130 130-187.0-10 105.00 5.0 117.00 143.00 1 187.0 2.2 0.107
P4KE130A 130-179.0-5 111.00 5.0 124.00 137.00 1 179.0 2.3 0.107
P4KE150 150-215.0-10 121.00 5.0 135.00 165.00 1 215.0 1.9 0.108
P4KE150A 150-207.0-5 128.00 5.0 143.00 158.00 1 207.0 2.0 0.108
P4KE160 160-230.0-10 130.00 5.0 144.00 176.00 1 230.0 1.8 0.108
P4KE160A 160-219.0-5 136.00 5.0 152.00 168.00 1 219.0 1.9 0.108
P4KE170 170-244.0-10 138.00 5.0 153.00 187.00 1 244.0 1.7 0.108
P4KE170A 170-234.0-5 145.00 5.0 162.00 179.00 1 234.0 1.8 0.108
P4KE180 180-256.0-10 146.00 5.0 162.00 198.00 1 256.0 1.6 0.108
P4KE180A 180-246.0-5 154.00 5.0 171.00 189.00 1 246.0 1.7 0.108
P4KE200 200-287.0-10 162.00 5.0 180.00 220.00 1 287.0 1.4 0.108
P4KE200A 200-274.0-5 171.00 5.0 190.00 210.00 1 274.0 1.51 0.108
P4KE220 220-344.0-10 175.00 5.0 198.00 242.00 1 344.0 1.2 0.108
P4KE220A 220-328.0-5 185.00 5.0 209.00 231.00 1 328.0 1.3 0.108
P4KE250 250-360.0-10 202.00 5.0 225.00 275.00 1 360.0 1.1 0.110
P4KE250A 250-344.0-5 214.00 5.0 237.00 267.00 1 344.0 1.2 0.110
P4KE300 300-430.0-10 243.00 5.0 270.00 330.00 1 430.0 0.97 0.110
P4KE300A 300-414.0-5 256.00 5.0 285.00 315.00 1 414.0 1.0 0.110
P4KE350 350-504.0-10 284.00 5.0 315.00 385.00 1 504.0 0.83 0.110
P4KE350A 350-482.0-5 300.00 5.0 332.00 368.00 1 482.0 0.87 0.110
P4KE400 400-574.0-10 324.00 5.0 360.00 440.00 1 571.0 0.73 0.110
P4KE400A 400-548.0-5 342.00 5.0 380.00 420.00 1 548.0 0.76 0.110
P4KE440 440-598.0-10 356.00 5.0 396.00 484.00 1 598.0 0.66 0.110
P4KE440A 440-590.0-5 376.00 5.0 418.00 462.00 1 590.0 0.69 0.110
T AB LE 5A - 400 WAT T T RANSIENT SU PPRESSO R DIE ELEC T RICAL SPEC IFIC AT IO N S (NOT E 1)
L OOS E L I PS
SINK
SHIPS!
MAX. CLAM PING
V O LTAGE (VCL) @
PEAK PULSE CURRENT
(IPP) (N O T E 5)
REVERSE
BREAKDOW N
VOLTAGE
(VBR) @ IT
(NOT E 4)
INDU S T R Y
STANDARD
PAR T
NUMBERS
REFER TO
PAGE 7 -7 FOR
OR DER
S PECIF IER
12251 TOWNE LAKE DRIVE, FORT MYERS, FLORIDA, 33913 TEL: (941) 768-6800 FAX: (941) 768-6868
SUSSEX
SEMICONDUCTOR, INC.
400 WATT TRANSIENT
SUPPRESSOR
DIE SPECIFICATIONS
12251 TOWNE LAKE DRIVE, FORT MYERS, FLORIDA, 33913 TEL: (941) 768-6800 FAX: (941) 768-6868
SUSSEX
SEMICONDUCTOR, INC.
7-7
ORDERING SPECIFIER
% PEAK PULSE CURRENT, IPP
TIME (ms)
FIGURE 3A - PULSE DERATING CURVE
0
25
50
75
100
0 25 50 75 100 125 150 175 200
NON-REPETITIVE
CURRENT PULSE
PER FIGU RE 2A
400
300
200
100
JUNCTION TEMPERA TURE, TJ (°C)
PEAK PULSE POWER (W ATTS)
FIGURE 2A - PULSE WAVEFORM
400 WATT DIE SPECIFICATIONS
CONTINUED
6.8 - 10.8 - 10
ORDER CODE FROM
PREVIOUS PA GES
BREAKDOWN VOLT AGE, VBR (V olts)
JUNCTION CAPACITANCE (pF)
FIGURE 1A - TYPICAL JUNCTION
CAPACITANCE
100
101
102
103
104
100101102103
Me asured @ 10 0mV
Meas ured @ Vs o
Tj=25 C
f= 1 kH z
THIS G RAPH DEMONSTRATES THE
PERFORMANCE OF A UNIPOLAR DIE.
BIPOLAR DIES W ILL HAVE A LOW ER
CAPACITANCE
CONTACT FACTORY FOR MORE
D E T A IL E D INFOR M A TIO N
0
50
100
150
0123
IPP
½ IPP
10:1000 WAVEFOR M
CODE DIE TYPE DIE
SPECIFIC ATION S
REFER TO:
SZU1.5 400 WAT T UNIPOLAR DIE PAGE 7- 1
SZ Z1 .5 4 00 WATT BIPOL AR DIE PAG E 7 -2
SZUF D1.5 400 WATT UNI POLAR FLIP-DI E PAGE 7-3
SZ ZD1.5 400 W ATT BIPO L AR DU AL -D IE PAGE 7 -4
TABLE 6A - AVAILABLE DIE SIZES
7-8
NOTES
NOTE 1::
::
:♦ELECTRICAL CHARACTERISTICS ARE AT A JUNCTION TEMPERATURE (TJ) OF 25°C
NOTE 2: ♦INDUSTRY STANDARD PAR T NUMBERS REFER TO PACKA GED DEVICES. THE DIES
INDICA TED BY THESE NUMBERS, IF PROPERLY P ACKAGED , WILL OPERA TE WITH THE
SAME PERFORMANCE
NOTE 3: ♦FOR BIPOLAR DEVICES WITH A VBR OF 10 V OLTS OR LESS, THE IR LIMIT IS
DOUBLED
NOTE 4: ♦DUAL DIE VBR IS MEASURED FROM TOP TO TOP OF DIE VBR MEASURED
FROM TOP TO BOTTOM WILL RESULT IN A LOWER VBR
NOTE 5: ♦SURGE CURRENT W AVEFORM SHOWN IN FIGURE 2A ON PAGE 7-10
♦PEAK PULSE POWER DERATING SHOWN IN FIGURE 3A ON PAGE 7-10
THIS T ABLE CONTINUES
( NO T E 2 )
500 W AT T
SA SER IES
SU SSEX
ORDER CODE STANDOFF
VOLTAGE
(VSO)
Volts
MAX.
REVERSE
LEAKAGE
(IR)@VSO
( NO T E 3 )
µA MIN.
Volts MAX.
Volts
TEST
CURRENT
(IT)
mA VCL
Volts IPP
Amps
MAX. TEMP.
COEFFICIENT
OF VBR
(mV/°C)
SA5.0 6.8-9.6-6.5 5 600 6.4 7.3 10 9.6 54.0 5.00
SA5.0A 6.7-9.2-4.4 5 600 6.4 7.0 10 9.2 57.0 5.00
SA6.0 6.4-11.4-9.9 6 600 6.7 8.2 10 11.4 46.0 5.00
SA6.0A 7.0-10.3-4.9 6 600 6.7 7.4 10 10.3 50.0 5.00
SA6.5 8.0-12.3-9.9 6.5 400 7.2 8.8 10 12.3 42.0 5.00
SA6.5A 7.6-11.2-5 6.5 400 7.2 8.0 10 11.2 46.0 5.00
SA7.0 8.6-13.3-10 7 150 7.8 9.5 10 13.3 39.0 6.00
SA7.0A 8.1-12-5 7 150 7.8 8.6 10 12.0 43.0 6.00
SA7.5 9.2-143-10 7.5 50 8.3 10.2 1 14.3 36.0 7.00
SA7.5A 8.7-12.9-5 7.5 50 8.3 9.2 1 12.9 40.0 7.00
SA8.0 9.8-15-10 8 25 8.9 10.9 1 15.0 35.0 7.00
SA8.0A 9.3-13.6-5 8 25 8.9 9.8 1 13.6 38.0 7.00
SA8.5 10.4-15.9-9.8 8.5 10 9.4 11.5 1 15.9 33.0 8.00
SA8.5A 9.9-14.4-4.8 8.5 10 9.4 10.4 1 14.4 36.0 8.00
SA9 11.1-169-9.9 9 5 10.0 12.2 1 16.9 31.0 9.00
SA9.0A 10.5-15.4-5.2 9 5 10.0 11.1 1 15.4 34.0 9.00
SA10 12.3-18.8-10 10 1 11.1 13.6 1 18.8 27.0 10.00
SA10A 11.7-17-5.1 10 1 11.1 12.3 1 17.0 30.0 10.00
SA11 13.5-20.1-9.9 11 1 12.2 14.9 1 20.1 26.0 11.00
SA11A 12.8-18.2-5 11 1 12.2 13.5 1 18.2 28.0 11.00
SA12 14.8-22-10 12 1 13.3 16.3 1 22.0 23.0 12.00
SA12A 14-19.9-5 12 1 13.3 14.7 1 19.9 26.3 12.00
SA13 16-23.8-10 13 1 14.4 17.6 1 23.8 22.0 13.00
SA13A 15.1-21.5-4.9 13 1 14.4 15.9 1 21.5 24.0 13.00
SA14 17.3-258-10 14 1 15.6 19.1 1 25.8 20.3 14.00
SA14A 16.4-23.2-4.8 14 1 15.6 17.2 1 23.2 22.6 14.00
SA15 18.5-26.9-9.9 15 1 16.7 20.4 1 26.9 19.5 16.00
SA15A 17.6-24.4-5.1 15 1 16.7 18.5 1 24.4 21.0 16.00
SA16 19.8-288-10.1 16 1 17.8 21.8 1 28.8 18.0 19.00
SA16A 18.7-26-5 16 1 17.8 19.7 1 26.0 20.0 17.00
SA17 21-30.5-10 17 1 18.9 23.1 1 30.5 17.0 20.00
SA17A 19.9-27.6-5 17 1 18.9 20.9 1 27.6 19.0 19.00
SA18 22.2-32.2-9.9 18 1 20.0 24.4 1 32.2 16.3 21.00
SA18A 21.0-29.2-4.9 18 1 20.0 22.1 1 29.2 17.9 20.00
SA20 24.6-35.8-9.9 20 1 22.2 27.1 1 35.8 14.0 25.00
SA20A 23.3-32.4-4.9 20 1 22.2 24.5 1 32.4 16.0 23.00
SA22 27.1-39.4-9.9 22 1 24.4 29.8 1 39.4 13.0 28.00
SA22A 25.6-35.5-4.8 22 1 24.4 26.9 1 35.5 14.7 25.00
SA24 29.6-43-9.9 24 1 26.7 32.6 1 43.0 12.0 31.00
SA24A 28.1-38.9-4.9 24 1 26.7 29.5 1 38.9 13.4 28.00
SA26 32.1-46.6-9.9 26 1 28.9 35.3 1 46.6 11.0 31.00
SA26A 30.4-42.1-4.9 26 1 28.9 31.9 1 42.1 12.4 30.00
SA28 34.5-50.1-9.9 28 1 31.1 38.0 1 50.1 10.0 35.00
SA28A 32.7-45.4-5 28 1 31.1 34.4 1 45.4 11.5 31.00
SA30 37-53.5-10 30 1 33.3 40.7 1 53.5 9.8 39.00
SA30A 35.0-48.4-4.9 30 1 33.3 36.8 1 48.4 10.8 36.00
TABLE 7A - 500 WATT T RANSIE NT S UPP RESSOR DIE ELECTRICAL SPECIFICATIONS (NOT E 1)
LOOS E LIPS
SINK
SHIPS!
MAX . CLAMP ING
VOLTAG E (VCL) @
PEAK PULSE
CURRE NT (IPP) (NOT E 5)
RE VERSE
BRE AKDO W N
VOLTAG E (VBR) @ IT
(NOT E 4)
INDUST R Y
STANDARD
PAR T
NUMBERS
REFER T O
PAGE 7-10 F OR
OR DER
S PE CIF IE R
12251 TOWNE LAKE DRIVE, FORT MYERS, FLORIDA, 33913 TEL: (941) 768-6800 FAX: (941) 768-6868
SUSSEX
SEMICONDUCTOR, INC.
500 WATT TRANSIENT
SUPPRESSOR
DIE SPECIFICATIONS
7-9
NOTES
NOTE 1::
::
:♦ELECTRICAL CHARACTERISTICS ARE AT A JUNCTION TEMPERATURE (TJ) OF 25°C
NOTE 2: ♦INDUSTR Y STANDARD PART NUMBERS REFER TO PA CKA GED DEVICES. THE DIES
INDICATED BY THESE NUMBERS, IF PROPERLY PACKA GED , WILL OPERATE WITH THE
SAME PERFORMANCE
NOTE 3: ♦FOR BIPOLAR DEVICES WITH A VBR OF 10 V OLTS OR LESS, THE IR LIMIT IS
DOUBLED
NOTE 4: ♦DUAL DIE VBR IS MEASURED FROM TOP TO TOP OF DIE VBR MEASURED
FROM TOP TO BOTTOM WILL RESULT IN A LOWER VBR
NOTE 5: ♦SURGE CURRENT W A VEFORM SHO WN IN FIGURE 2A ON PAGE 7-10
♦PEAK PULSE POWER DERATING SHOWN IN FIGURE 3A ON PAGE 7-10
( NO T E 2 )
500 W AT T
SA SER IES
SU SSEX
ORDER CODE STANDOFF
VOLTAGE
(VSO)
Volts
MAX.
REVERSE
LEAKAGE
(IR)@VSO
( NO T E 3 )
µ
A MIN.
Volts MAX.
Volts
TEST
CURRENT
(IT)
mA VCL
Volts IPP
Amps
MAX. TEMP.
COEFFICIENT
OF VBR
(
mV/°C
)
SA33 40.8-59-10 33 1 36.7 44.9 1 59.0 8.8 42.00
SA33A 38.6-53.3-5 33 1 36.7 40.6 1 53.3 9.8 39.00
SA36 44.4-64.3-10 36 1 40.0 48.9 1 64.3 8 1 46.00
SA36A 42.1-58.1-4.9 36 1 40.0 44.2 1 58.1 9.0 41.00
SA40 49.3-71.4-10 40 1 44.4 54.3 1 71.4 7.3 51.00
SA40A 46.7-64.5-5 40 1 44.4 49.1 1 64.5 8.1 46.00
SA43 53.1-76.7-9.9 43 1 47.8 58.4 1 76.7 6.8 55.00
SA43A 50.3-69.4-4.8 43 1 47.9 52.8 1 69.4 7.5 50.00
SA45 55.5-80.3-9.9 45 1 50.0 61.1 1 80.3 6.5 58.00
SA45A 52.6-72.7-5 45 1 50.0 55.3 1 72.7 7.2 52.00
SA48 59.2-85.5-10 48 1 53.3 65.2 1 85.5 6.1 63.00
SA48A 56.1-77.4-4.9 48 1 53.3 58.9 1 77.4 6.7 56.00
SA51 63-91.1-10 51 1 56.7 69.3 1 91.1 5.7 66.00
SA51A 59.7-82.4-5 51 1 56.7 62.7 1 82.4 6.3 61.00
SA54 66.6-96.3-9.9 54 1 60.0 73.3 1 96.3 5.4 71.00
SA54A 63.1-87.1-4.9 54 1 60.0 66.3 1 87.1 6.0 65.00
SA58 71.5-103-9.9 58 1 64.4 78.7 1 103.0 5.0 78.00
SA58A 67.8-93.6-5 58 1 64.4 71.2 1 93.6 5.6 70.00
SA60 74.1-107-9.9 60 1 66.7 81.5 1 107.0 4.9 80.00
SA60A 70.2-96.8-4.9 60 1 66.7 73.7 1 96.8 5.4 71.00
SA64 79-114-10 64 1 71.1 86.9 1 114 4.6 86.00
SA64A 74.8-103-5 64 1 71.1 78.6 1 103 5.0 76.00
SA70 86.4-125-10 70 1 77.8 95.1 1 125 4.2 94.00
SA70A 81.9-113-5 70 1 77.8 86 1 113 4.6 85.00
SA75 92.6-134-10 75 1 83.3 102 1 134 3.9 101.00
SA75A 87.7-121-5 75 1 83.3 92.1 1 121 4.3 91.00
SA78 96.3-139-10 78 1 86.7 106 1 139 3.7 105.00
SA78A 91.2-126-4.9 78 1 86.7 95.8 1 126 4.1 95.00
SA85 104.7-151-9.8 85 1 94.4 115 1 151 3.4 114.00
SA85A 99.2-137-4.8 85 1 94.4 104 1 137 3.8 103.00
SA90 66-160-9.9 90 1 100.0 122 1 160 3.2 121.00
SA90A 105.5-146-5.2 90 1 100.0 111 1 146 3.5 110.00
SA100 123.5-179-10.1 100 1 111.0 136 1 179 2.9 135.00
SA100A 117-162-5.1 100 1 111.0 123 1 162 3.2 123.00
SA110 135.5-196-9.9 110 1 122.0 149 1 196 2.6 148.00
SA110A 128.5-177-5 110 1 122.0 135 1 177 2.9 133.00
SA120 148-214-10.1 120 1 133.0 163 1 214 2.4 162.00
SA120A 140-193-5 120 1 133.0 147 1 193 2.7 146.00
SA130 160-230-10 130 1 144.0 176 1 230 2.2 175.00
SA130A 151.5-209-4.9 130 1 144.0 159 1 209 2.5 158.00
SA150 185.5-268-9.9 150 1 167.0 204 1 268 1.9 203.00
SA150A 176-243-5.1 150 1 167.0 185 1 243 2.1 184.00
SA160 198-257-10.1 160 1 178.0 218 1 257 2.0 217.00
SA160A 187.5-259-5 160 1 178.0 197 1 259 2.0 196.00
SA170 210-304-10 170 1 189.0 231 1 304 1.7 230.00
SA170A 199-275-5 170 1 189.0 209 1 275 1.9 208.00
TABLE 7A - 500 WATT T RANSIE NT S UP PRESSOR DIE ELECTRICAL SPECIFICATIONS (NOT E 1)
LOOS E LIPS
SINK
SHIPS!
MAX . CLAMP ING
VOLTAGE (VCL) @
PEAK PULSE
CURRE NT (IPP) (NOT E 5)
RE V E RSE
BRE AKDO W N
VOLTAGE (VBR) @ IT
(NOT E 4)
INDUST R Y
STANDARD
PAR T
NUMBERS
REFER T O
PAGE 7-10 F OR
OR DER
S PE CIF IE R
12251 TOWNE LAKE DRIVE, FORT MYERS, FLORIDA, 33913 TEL: (941) 768-6800 FAX: (941) 768-6868
SUSSEX
SEMICONDUCTOR, INC.
500 WATT TRANSIENT
SUPPRESSOR
DIE SPECIFICATIONS
7-10
0
50
100
150
0123
IPP
½ IPP
10:1000 WAVEFORM
% PEAK PULSE CURRENT, IPP
TIME (ms)
FIGURE 3A - PULSE DERATING CURVE
0
125
250
375
500
0 25 50 75 100 125 150 175 200
NON-REPETATIVE
CURRENT PULSE
PER FIGURE 2 A
NON-REPETITIVE
CURRENT PULSE
PE R FIGUR E 2A
JUNCTION TEMPERA TURE, TJ (°C)
PEAK PULSE POWER (W ATTS)
FIGURE 2A - PULSE WAVEFORM
ORDERING SPECIFIER
6.8 - 9.6 - 6.5
ORDER CODE FROM
PREVIOUS PA GES
BREAKDOWN VOLT AGE, VBR (V olts)
JUNCTION CAPACITANCE (pF)
FIGURE 1A - TYPICAL JUNCTION
CAPACITANCE
100
101
102
103
104
100101102103
Me asured @ 10 0mV
Meas ured @ Vs o
Tj=25 C
f= 1 kH z
THIS G RAPH DEMONSTRATES THE
PERFORMANCE OF A UNIPOLAR DIE.
BIPOLAR DIES W ILL HAVE A LOW ER
CAPACITANCE
CONTACT FACTORY FOR MORE
D E T A IL E D INFOR M A TIO N
CO DE DIE T YPE DIE
SPECIFICATIONS
REFER T O:
SZU 2 500 W ATT U N IPO LAR D IE PAG E 7-1
SZZ2 5 00 W ATT BIPOL AR DIE PAG E 7-2
SZU FD2 50 0 W ATT U NIPO LAR FL IP- D IE PAGE 7-3
SZZD2 5 00 W ATT BIPOL AR DU AL-D IE PAGE 7-4
TABL E 8A - AVAILABLE DIE SIZE S
12251 TOWNE LAKE DRIVE, FORT MYERS, FLORIDA, 33913 TEL: (941) 768-6800 FAX: (941) 768-6868
SUSSEX
SEMICONDUCTOR, INC.
500 WATT DIE
SPECIFICATIONS CONTINUED
7-11
NOTES
NOTE 1::
::
:♦ELECTRICAL CHARACTERISTICS ARE AT A JUNCTION TEMPERATURE (TJ) OF 25°C
NOTE 2: ♦INDUSTR Y STANDARD PART NUMBERS REFER TO PA CKA GED DEVICES. THE DIES
INDICATED BY THESE NUMBERS, IF PROPERLY PACKA GED , WILL OPERATE WITH THE
SAME PERFORMANCE
NOTE 3: ♦FOR BIPOLAR DEVICES WITH A VBR OF 10 V OLTS OR LESS, THE IR LIMIT IS
DOUBLED
NOTE 4: ♦DUAL DIE VBR IS MEASURED FROM TOP TO TOP OF DIE VBR MEASURED
FROM TOP TO BOTTOM WILL RESULT IN A LOWER VBR
NOTE 5: ♦SURGE CURRENT W A VEFORM SHOWN IN FIGURE 2A ON PAGE 7-13
♦PEAK PULSE POWER DERATING SHOWN IN FIGURE 3A ON PAGE 7-13
THIS T ABLE CONTINUES
600 WA T T
P6K E
SERIES
SU SSEX
ORDER
CODE STANDO FF
VOLTAGE
(VSO)
Volts
MAX.
REVERSE
LEAKAGE
(IR)@VSO
(N O T E 2)
µA MIN.
Volts MAX.
Volts
TEST
CURRENT
(IT)
mA VCL
Volts IPP
Amps
MAX. TEMP.
COEFFICIENT
OF VBR
(
%/°C
)
P6KE6.8 6.8-10.8-10 5.50 1000 6.12 7.48 10 10.8 58.0 0.057
P6KE6.8A 6.8-10.5-5 5.80 1000 6.45 7.14 10 10.5 60.0 0.057
P6KE7.5 7.5-11.7-10 6.05 500 6.75 8.25 10 11.7 53.0 0.061
P6KE7.5A 7.5-11.3-5 6.40 500 7.13 7.88 10 11.3 55.0 0.061
P6KE8.2 8.2-12.5-10 6.63 200 7.38 9.02 10 12.5 50.0 0.065
P6KE8.2A 8.2-12.1-5 7.02 200 7.79 8.61 10 12.1 52.0 0.065
P6KE9.1 9.1-13.8-10 7.37 50 8.19 10.00 1 13.8 45.0 0.068
P6KE9.1A 9.1-13.4-5 7.78 50 8.65 9.55 1 13.4 47.0 0.068
P6KE10 10-15.0-10 8.10 10 9.00 11.00 1 15.0 42.0 0.073
P6KE10A 10-14.5-5 8.55 10 9.50 10.50 1 14.5 43.0 0.073
P6KE11 11-16.2-10 8.92 5.0 9.90 12.10 1 16.2 38.0 0.075
P6KE11A 11-15.6-5 9.40 5.0 10.50 11.60 1 15.6 40.0 0.075
P6KE12 12-17.3-10 9.72 5.0 10.80 13.20 1 17.3 36.0 0.078
P6KE12A 12-16.7-5 10.20 5.0 11.40 12.60 1 16.7 37.0 0.078
P6KE13 13-19.0-10 10.50 5.0 11.70 14.30 1 19.0 33.0 0.061
P6KE13A 13-18.2-5 11.10 5.0 12.40 13.70 1 18.2 34.0 0.081
P6KE15 15-22.0-10 12.10 5.0 13.50 16.50 1 22.0 28.0 0.084
P6KE15A 15-21.2-5 12.80 5.0 14.30 15.80 1 21.2 29.0 0.084
P6KE16 16-23.5-10 12.90 5.0 14.40 17.60 1 23.5 26.0 0.086
P6KE16A 16-22.5-5 13.60 5.0 15.20 16.80 1 22.5 28.0 0.086
P6KE18 18-26.5-10 14.50 5.0 16.20 19.80 1 26.5 23.0 0.088
P6KE18A 18-25.2-5 15.30 5.0 17.10 18.90 1 25.2 25.0 0.088
P6KE20 20-29.1-10 16.20 5.0 18.00 22.00 1 29.1 21.0 0.090
P6KE20A 20-27.7-5 17.10 5.0 19.00 21.00 1 27.7 22.0 0.090
P6KE22 22-31.9-10 17.80 5.0 19.80 24.20 1 31.9 19.0 0.092
P6KE22A 22-30.6-5 18.80 5.0 20.90 23.10 1 30.6 20.0 0.092
P6KE24 24-34.7-10 19.40 5.0 21.60 26.40 1 34.7 18.0 0.091
P6KE24A 24-33.2-5 20.50 5.0 22.80 25.20 1 33.2 19.0 0.094
P6KE27 27-39.1-10 21.80 5.0 24.30 29.70 1 39.0 16.0 0.096
P6KE27A 27-37.5-5 23.10 5.0 25.70 28.40 1 37.5 16.8 0.096
P6KE30 30-43.5-10 24.30 5.0 27.00 33.00 1 43.5 14.0 0.097
P6KE30A 30-41.4-5 25.60 5.0 28.50 31.50 1 41.4 15.0 0.097
P6KE33 33-47.7-10 26.80 5.0 29.70 36.30 1 47.7 13.0 0.098
P6KE33A 33-45.7-5 28.20 5.0 31.40 34.70 1 45.7 13.8 0.098
P6KE36 36-52.0-10 29.10 5.0 32.40 39.60 1 52.0 12.0 0.099
P6KE36A 36-49.9-5 30.80 5.0 34.20 37.80 1 49.9 12.6 0.099
P6KE39 39-56.4-10 31.60 5.0 35.10 42.90 1 56.4 11.1 0.100
P6KE39A 39-53.9-5 33.30 5.0 37.10 41.00 1 53.9 11.6 0.100
P6KE43 43-61.9-10 34.80 5.0 38.70 47.30 1 61.9 10.0 0.101
P6KE43A 43-59.3-5 36.80 5.0 40.90 45.20 1 59.3 10.6 0.101
P6KE47 47-67.8-10 38.10 5.0 42.30 51.70 1 67.8 9.2 0.101
P6KE47A 47-64.8-5 40.20 5.0 44.70 49.40 1 64.8 9.7 0.101
P6KE51 51-70.1-10 41.30 5.0 45.90 56.10 1 73.5 8.5 0.102
TABLE 9A - 600 W ATT TRANSIENT SUPPRESSOR DIE ELECTRICAL SPECIFICATIOS
(
NOTE 1
)
LOOSE LIPS
SINK
SHIPS!
MAX . CLAMPING
VOLTAGE (VCL) @
P E AK P ULS E CURRENT
(IPP) (N OTE 4)
REVERSE
BRE AKDOWN
VOLTAGE
(VBR) @ IT
(N OT E 3)
INDU ST R Y
STANDARD
PAR T
NUMBERS
REFER TO
PAGE 7-13
FOR ORDER
SPECIFIER
12251 TOWNE LAKE DRIVE, FORT MYERS, FLORIDA, 33913 TEL: (941) 768-6800 FAX: (941) 768-6868
SUSSEX
SEMICONDUCTOR, INC.
600 WATT TRANSIENT
SUPPRESSOR
DIE SPECIFICATIONS
7-12
NOTES
NOTE 1::
::
:♦ELECTRICAL CHARACTERISTICS ARE AT A JUNCTION TEMPERATURE (TJ) OF 25°C
NOTE 2: ♦INDUSTRY STANDARD PAR T NUMBERS REFER TO PACKA GED DEVICES. THE DIES
INDICA TED BY THESE NUMBERS, IF PROPERLY P ACKAGED , WILL OPERA TE WITH THE
SAME PERFORMANCE
NOTE 3: ♦FOR BIPOLAR DEVICES WITH A VBR OF 10 V OLTS OR LESS, THE IR LIMIT IS
DOUBLED
NOTE 4: ♦DUAL DIE VBR IS MEASURED FROM TOP TO TOP OF DIE VBR MEASURED
FROM TOP T O BOTTOM WILL RESULT IN A LO WER VBR
NOTE 5: ♦SURGE CURRENT W AVEFORM SHOWN IN FIGURE 2A ON PAGE 7-13
♦PEAK PULSE POWER DERATING SHOWN IN FIGURE 3A ON PAGE 7-13
600 WA T T
P6K E
SERIES
SU SSEX
ORDER
CODE STANDO FF
VOLTAGE
(VSO)
Volts
MAX.
REVERSE
LEAKAGE
(IR)@VSO
(N O T E 2)
µA MIN.
Volts MAX.
Volts
TEST
CURRENT
(IT)
mA VCL
Volts IP P
Amps
MAX. TEMP.
COEFFICIENT
OF VBR
(
%/°C
)
P6KE51A 51-70.1-5 43.60 5.0 48.50 53.60 1 70.1 8.9 0.102
P6KE56 56-80.5-10 45.40 5.0 50.40 61.60 1 80.5 7.8 0.103
P6KE56A 56-77.0-5 47.80 5.0 53.20 58.80 1 77.0 8.1 0.103
P6KE62 62-89.0-10 50.20 5.0 55.80 68.20 1 89.0 7.0 0.104
P6KE62A 62-85.0-5 53.00 5.0 58.90 65.10 1 85.0 7.4 0.104
P6KE68 68-96.0-10 55.10 5.0 61.20 74.80 1 96.0 6.4 0.104
P6KE68A 68-92.0-5 58.10 5.0 64.60 71.40 1 92.0 6.8 0.104
P6KE75 75-108.0-10 60.70 5.0 67.50 82.50 1 108.0 5.8 0.105
P6KE75A 75-103.0-5 64.10 5.0 71.30 78.80 1 103.0 6.1 0.105
P6KE82 82-118.0-10 66.40 5.0 73.80 90.20 1 118.0 5.3 0.105
P6KE82A 82-113.0-5 70.10 5.0 77.90 86.10 1 113.0 5.5 0.105
P6KE91 91-131.0-10 73.70 5.0 81.90 100.00 1 131.0 4.8 0.106
P6KE91A 91-125.0-5 77.80 5.0 86.50 95.50 1 125.0 5.0 0.106
P6KE100 100-144.0-10 81.00 5.0 90.00 110.00 1 144.0 4.3 0.106
P6KE100A 100-137.0-5 85.50 5.0 95.00 105.00 1 137.0 4.5 0.106
P6KE110 110-158.0-10 89.20 5.0 99.00 121.00 1 158.0 3.9 0.107
P6KE110A 110-152.0-5 94.00 5.0 105.00 116.00 1 152.0 4.1 0.107
P6KE120 120-173.0-10 97.20 5.0 108.00 132.00 1 173.0 3.6 0.107
P6KE120A 120-165.0-5 102.00 5.0 114.00 126.00 1 165.0 3.8 0.107
P6KE130 130-187.0-10 105.00 5.0 117.00 143.00 1 187.0 3.3 0.107
P6KE130A 130-179.0-5 111.00 5.0 124.00 137.00 1 179.0 3.5 0.107
P6KE150 150-215.0-10 121.00 5.0 135.00 165.00 1 215.0 2.9 0.108
P6KE150A 150-207.0-5 128.00 5.0 143.00 158.00 1 207.0 3.0 0.108
P6KE160 160-230.0-10 130.00 5.0 144.00 176.00 1 230.0 2.7 0.108
P6KE160A 160-219.0-5 136.00 5.0 152.00 168.00 1 219.0 2.8 0.108
P6KE170 170-244.0-10 138.00 5.0 153.00 187.00 1 244.0 2.5 0.108
P6KE170A 170-234.0-5 145.00 5.0 162.00 179.00 1 234.0 2.6 0.108
P6KE180 180-256.0-10 146.00 5.0 162.00 198.00 1 256.0 2.4 0.108
P6KE180A 180-246.0-5 154.00 5.0 171.00 189.00 1 246.0 2.5 0.108
P6KE200 200-287.0-10 162.00 5.0 180.00 220.00 1 287.0 2.1 0.108
P6KE200A 200-274.0-5 171.00 5.0 190.00 210.00 1 274.0 2.2 0.108
P6KE220 220-344.0-10 175.00 5.0 198.00 242.00 1 344.0 1.8 0.108
P6KE220A 220-328.0-5 185.00 5.0 209.00 231.00 1 328.0 1.9 0.108
P6KE250 250-360.0-10 202.00 5.0 225.00 275.00 1 360.0 1.7 0.110
P6KE250A 250-344.0-5 214.00 5.0 237.00 263.00 1 344.0 1.8 0.110
P6KE300 300-430.0-10 243.00 5.0 270.00 330.00 1 430.0 1.4 0.110
P6KE300A 300-414.0-5 256.00 5.0 285.00 315.00 1 414.0 1.5 0.110
P6KE350 350-504.0-10 284.00 5.0 315.00 385.00 1 504.0 1.2 0.110
P6KE350A 350-482.0-5 300.00 5.0 332.00 368.00 1 482.0 1.3 0.110
P6KE400 400-574.0-10 324.00 5.0 360.00 440.00 1 571.0 1.9 0.110
P6KE400A 400-548.0-5 342.00 5.0 380.00 420.00 1 548.0 1.1 0.110
P6KE440 440-598.0-10 356.00 5.0 396.00 484.00 1 598.0 0.99 0.110
P6KE440A 440-590.0-5 376.00 5.0 418.00 462.00 1 590.0 1.04 0.110
TABLE 9A - 600 W ATT TRANSIENT SUPPRESSOR DIE ELECTRICAL SPECIFICATIOS
(
NOTE 1
)
LOOS E LIPS
SINK
SHIPS!
MAX . CLAMP ING
VOLTAGE (VCL) @
P E AK PULS E CURRE NT
(IPP) (N OT E 4)
REVERSE
BRE AKDO W N
VOLTAGE
(VBR) @ IT
(N OT E 3)
INDU S T R Y
STANDARD
PAR T
NUMBERS
REFER T O
PAGE 7 -13
FOR ORDER
SPECIFIER
12251 TOWNE LAKE DRIVE, FORT MYERS, FLORIDA, 33913 TEL: (941) 768-6800 FAX: (941) 768-6868
SUSSEX
SEMICONDUCTOR, INC.
600 WATT TRANSIENT
SUPPRESSOR
DIE SPECIFICATIONS
7-13
0
50
100
150
0123
IPP
½ IPP
10:1000 WAVEFORM
% PEAK PULSE CURRENT, IPP
TIME (ms)
FIGURE 3A - PULSE DERATING CURVE
0
150
300
450
600
0 25 50 75 100 125 150 175 200
NON-REPETATIVE
CURRENT PU LSE
PER FIGURE 2A
NON-REPETITIVE
CU RRENT PULSE
PER FIG U R E 2 A
JUNCTION TEMPERA TURE, TJ (°C)
PEAK PULSE POWER (W ATTS)
FIGURE 2A - PULSE WAVEFORM
ORDERING SPECIFIER
6.8 - 10.8 - 10
ORDER CODE FROM
PREVIOUS PA GES
BREAKDOWN VOLT AGE, VBR (V olts)
JUNCTION CAPACITANCE (pF)
FIGURE 1A - TYPICAL JUNCTION
CAPACITANCE
100
101
102
103
104
100101102103
Me asured @ 10 0mV
Meas ured @ Vs o
Tj=25 C
f= 1 kH z
THIS G RAPH DEMONSTRATES THE
PERFORMANCE OF A UNIPOLAR DIE.
BIPOLAR DIES W ILL HAVE A LOW ER
CAPACITANCE
CONTACT FACTORY FOR MORE
D E T A IL E D INFOR M A TIO N
CO DE DIE T YPE DIE
SPECIFICATIONS
REF ER T O:
SZU3 600 WAT T UNI POLAR DIE PAGE 7-1
SZZ3 600 WAT T BIPOLAR DIE PAGE 7-2
SZUFD3 600 WAT T UNIPOLAR FLIP-DIE PAGE 7-3
SZZ D3 600 WAT T BIPOLAR DUAL-DIE PAGE 7-4
TABLE 10A - AVAILABLE DIE SIZES
12251 TOWNE LAKE DRIVE, FORT MYERS, FLORIDA, 33913 TEL: (941) 768-6800 FAX: (941) 768-6868
SUSSEX
SEMICONDUCTOR, INC.
600 WATT DIE
SPECIFICATIONS CONTINUED
7-14
NOTES
NOTE 1::
::
:♦ELECTRICAL CHARACTERISTICS ARE AT A JUNCTION TEMPERATURE (TJ) OF 25°C
NOTE 2: ♦INDUSTR Y STANDARD PART NUMBERS REFER TO PA CKA GED DEVICES. THE DIES
INDICATED BY THESE NUMBERS, IF PROPERLY PACKA GED , WILL OPERATE WITH THE
SAME PERFORMANCE
NOTE 3: ♦FOR BIPOLAR DEVICES WITH A VBR OF 10 V OLTS OR LESS, THE IR LIMIT IS
DOUBLED
NOTE 4: ♦DUAL DIE VBR IS MEASURED FROM TOP TO TOP OF DIE VBR MEASURED
FROM TOP TO BOTTOM WILL RESULT IN A LOWER VBR
NOTE 5: ♦SURGE CURRENT W A VEFORM SHO WN IN FIGURE 2A ON PAGE 7-16
♦PEAK PULSE POWER DERATING SHOWN IN FIGURE 3A ON PAGE 7-16
THIS T ABLE CONTINUES
JE DEC PART
NUMBE RS
(NOT E 2) 1500 W A TT
1.5K E
SERIES
SU SSEX
ORDER
CODE STANDOFF
VOLTAGE
(VSO)
Volts
MAX.
REVERSE
LEAKAGE
(IR)@VSO
(N OT E 3)
µA MIN.
Volts MAX.
Volts
TEST
CURRENT
(IT)
mA VCL
Volts IPP
Amps
MAX. TEMP.
COEFFICIENT
OF VBR
(
%/°C
)
1N6267 1.5KE6.8 6.8-10.8-10 5.50 1000 6.12 7.48 10 10.8 145.0 0.057
1N6267A 1.5KE6.8A 6.8-10.5-5 5.80 1000 6.45 7.14 10 10.5 150.0 0.057
1N6268 1.5KE7.5 7.5-11.7-10 6.05 500 6.75 8.25 10 11.7 134.0 0.061
1N6268A 1.5KE7.5A 7.5-11.3-5 6.40 500 7.13 7.88 10 11.3 139.0 0.061
1N6269 1.5KE8.2 8.2-12.5-10 6.63 200 7.38 9.02 10 12.5 126.0 0.065
1N6269A 1.5KE8.2A 8.2-12.1-5 7.02 200 7.79 8.61 10 12.1 130.0 0.065
1N6270 1.5KE9.1 9.1-13.8-10 7.37 50 8.19 10.00 1 13.8 114.0 0.068
1N6270A 1.5KE9.1A 9.1-13.4-5 7.78 50 8.65 9.55 1 13.4 117.0 0.068
1N6271 1.5KE10 10-15.0-10 8.10 10 9.00 11.00 1 15.0 105.0 0.073
1N6271A 1.5KE10A 10-14.5-5 8.55 10 9.50 10.50 1 14.5 108.0 0.073
1N6272 1.5KE11 11-16.2-10 8.92 5.0 9.90 12.10 1 16.2 97.0 0.075
1N6272A 1.5KE11A 11-15.6-5 9.40 5.0 10.50 11.60 1 15.6 100.0 0.075
1N6273 1.5KE12 12-17.3-10 9.72 5.0 10.80 13.20 1 17.3 91.0 0.078
1N6273A 1.5KE12A 12-16.7-5 10.20 5.0 11.40 12.60 1 16.7 94.0 0.078
1N6274 1.5KE13 13-19.0-10 10.50 5.0 11.70 14.30 1 19.0 82.0 0.061
1N6274A 1.5KE13A 13-18.2-5 11.10 5.0 12.40 13.70 1 18.2 86.0 0.081
1N6275 1.5KE15 15-22.0-10 12.10 5.0 13.50 16.50 1 22.0 71.0 0.084
1N6275A 1.5KE15A 15-21.2-5 12.80 5.0 14.30 15.80 1 21.2 74.0 0.084
1N6276 1.5KE16 16-23.5-10 12.90 5.0 14.40 17.60 1 23.5 67.0 0.086
1N6276A 1.5KE16A 16-22.5-5 13.60 5.0 15.20 16.80 1 22.5 70.0 0.086
1N6277 1.5KE18 18-26.5-10 14.50 5.0 16.20 19.80 1 26.5 59.0 0.088
1N6277A 1.5KE18A 18-25.2-5 15.30 5.0 17.10 18.90 1 25.2 60.0 0.088
1N6278 1.5KE20 20-29.1-10 16.20 5.0 18.00 22.00 1 29.1 54.0 0.090
1N6278A 1.5KE20A 20-27.7-5 17.10 5.0 19.00 21.00 1 27.7 56.0 0.090
1N6279 1.5KE22 22-31.9-10 17.80 5.0 19.80 24.20 1 31.9 49.0 0.092
1N6279A 1.5KE22A 22-30.6-5 18.80 5.0 20.90 23.10 1 30.6 51.0 0.092
1N6280 1.5KE24 24-34.7-10 19.40 5.0 21.60 26.40 1 34.7 45.0 0.091
1N6280A 1.5KE24A 24-33.2-5 20.50 5.0 22.80 25.20 1 33.2 47.0 0.094
1N6281 1.5KE27 27-39.1-10 21.80 5.0 24.30 29.70 1 39.1 40.0 0.096
1N6281A 1.5KE27A 27-37.5-5 23.10 5.0 25.70 28.40 1 37.5 42.0 0.096
1N6282 1.5KE30 30-43.5-10 24.30 5.0 27.00 33.00 1 43.5 36.0 0.097
1N6282A 1.5KE30A 30-41.4-5 25.60 5.0 28.50 31.50 1 41.4 38.0 0.097
1N6283 1.5KE33 33-47.7-10 26.80 5.0 29.70 36.30 1 47.7 33.0 0.098
1N6283A 1.5KE33A 33-45.7-5 28.20 5.0 31.40 34.70 1 45.7 34.0 0.098
1N6284 1.5KE36 36-52.0-10 29.10 5.0 32.40 39.60 1 52.0 30.0 0.099
1N6284A 1.5KE36A 36-49.9-5 30.80 5.0 34.20 37.80 1 49.9 31.0 0.099
1N6285 1.5KE39 39-56.4-10 31.60 5.0 35.10 42.90 1 56.4 27.0 0.100
1N6285A 1.5KE39A 39-53.9-5 33.30 5.0 37.10 41.00 1 53.9 29.0 0.100
1N6286 1.5KE43 43-61.9-10 34.80 5.0 38.70 47.30 1 61.9 25.0 0.101
1N6286A 1.5KE43A 43-59.3-5 36.80 5.0 40.90 45.20 1 59.3 26.0 0.101
1N6287 1.5KE47 47-67.8-10 36.10 5.0 42.30 51.70 1 67.8 23.0 0.101
1N6287A 1.5KE47A 47-64.8-5 40.20 5.0 44.70 49.40 1 64.8 24.0 0.101
1N6288 1.5KE51 51-70.1-10 41.30 5.0 45.90 56.10 1 73.5 21.0 0.102
TAB L E 11A - 1500 WATT TRAN S IE NT S U P P RE S S OR DIE E LE CTR ICAL S P EC IFIC ATIONS (NOT E 1)
MAX . CLAMP ING
VOLTAGE (VCL)
@ PEAK PULSE
CURRE NT (IPP)
(NOT E 5)
REVERSE
BREAKDOW
N VOLTAGE
(VBR) @ IT
(NOT E 4)
INDU S T R Y
STANDARD
PAR T
NUMBERS REFER TO
PAGE 7 -16
FOR ORDER
S PE CIF IE R
12251 TOWNE LAKE DRIVE, FORT MYERS, FLORIDA, 33913 TEL: (941) 768-6800 FAX: (941) 768-6868
SUSSEX
SEMICONDUCTOR, INC.
1500 WATT TRANSIENT
SUPPRESSOR
DIE SPECIFICATIONS
7-15
NOTES
NOTE 1::
::
:♦ELECTRICAL CHARACTERISTICS ARE AT A JUNCTION TEMPERATURE (TJ) OF 25°C
NOTE 2: ♦INDUSTR Y STANDARD PART NUMBERS REFER TO PA CKA GED DEVICES. THE DIES
INDICATED BY THESE NUMBERS, IF PROPERLY PACKA GED , WILL OPERATE WITH THE
SAME PERFORMANCE
NOTE 3: ♦FOR BIPOLAR DEVICES WITH A VBR OF 10 V OLTS OR LESS, THE IR LIMIT IS
DOUBLED
NOTE 4: ♦DUAL DIE VBR IS MEASURED FROM TOP TO TOP OF DIE VBR MEASURED
FROM TOP TO BOTTOM WILL RESULT IN A LOWER VBR
NOTE 5: ♦SURGE CURRENT W A VEFORM SHO WN IN FIGURE 2A ON PAGE 7-16
♦PEAK PULSE POWER DERATING SHOWN IN FIGURE 3A ON PAGE 7-16
JE DE C PART
NUMBE RS
(NOT E 2) 1500 W A TT
1.5K E
SERIES
SU SSEX
ORDER
CODE STANDOFF
VOLTAGE
(VSO)
Volts
MAX.
REVERSE
LEAKAGE
(IR)@VSO
(N OT E 3)
µA MIN.
Volts MAX.
Volts
TEST
CURRENT
(IT)
mA VCL
Volts IP P
Amps
MAX. TEMP.
COEFFICIENT
OF VBR
(
%/°C
)
1N6288A 1.5KE51A 51-70.1-5 43.60 5.0 48.50 53.60 1 70.1 22.0 0.102
1N6289 1.5KE56 56-80.5-10 45.60 5.0 50.40 61.80 1 80.5 19.0 0.103
1N6289A 1.5KE56A 56-77.0-5 47.80 5.0 53.20 58.80 1 77.0 20.0 0.103
1N6290 1.5KE62 62-89.0-10 50.20 5.0 55.80 68.20 1 89.0 17.0 0.104
1N6290A 1.5KE62A 62-85.0-5 53.00 5.0 58.90 65.10 1 85.0 18.0 0.104
1N6291 1.5KE68 68-96.0-10 55.10 5.0 61.20 74.80 1 96.0 16.0 0.104
1N6291A 1.5KE68A 68-92.0-5 58.10 5.0 64.60 71.40 1 92.0 17.0 0.104
1N6292 1.5KE75 75-108.0-10 60.70 5.0 67.50 82.50 1 108.0 14.0 0.105
1N6292A 1.5KE75A 75-103.0-5 64.10 5.0 71.30 78.80 1 103.0 15.0 0.105
1N6293 1.5KE82 82-118.0-10 66.40 5.0 73.80 90.20 1 118.0 13.0 0.105
1N6293A 1.5KE82A 82-113.0-5 70.10 5.0 77.90 86.10 1 113.0 13.9 0.105
1N6294 1.5KE91 91-131.0-10 73.70 5.0 81.90 100.00 1 131.0 12.0 0.106
1N6294A 1.5KE91A 91-125.0-5 77.80 5.0 86.50 95.50 1 125.0 12.6 0.106
1N6295 1.5KE100 100-144.0-10 81.00 5.0 90.00 110.00 1 144.0 10.9 0.106
1N6295A 1.5KE100A 100-137.0-5 85.50 5.0 95.00 105.00 1 137.0 11.4 0.106
1N6296 1.5KE110 110-158.0-10 89.20 5.0 99.00 121.00 1 158.0 9.9 0.107
1N6296A 1.5KE110A 110-152.0-5 94.00 5.0 106.00 116.00 1 152.0 10.3 0.107
1N6297 1.5KE120 120-173.0-10 97.20 5.0 108.00 132.00 1 173.0 9.1 0.107
1N6297A 1.5KE120A 120-165.0-5 102.00 5.0 114.00 126.00 1 165.0 9.5 0.107
1N6298 1.5KE130 130-187.0-10 106.00 5.0 117.00 143.00 1 187.0 8.4 0.107
1N6298A 1.5KE130A 130-179.0-5 111.00 5.0 124.00 137.00 1 179.0 8.7 0.107
1N6299 1.5KE150 150-215.0-10 121.00 5.0 136.00 165.00 1 215.0 7.3 0.108
1N6299A 1.5KE150A 150-207.0-5 128.00 5.0 143.00 158.00 1 207.0 7.6 0.108
1N6300 1.5KE160 160-230.0-10 130.00 5.0 144.00 176.00 1 230.0 6.8 0.108
1N6300A 1.5KE160A 160-219.0-5 136.00 5.0 152.00 168.00 1 219.0 7.1 0.108
1N6301 1.5KE170 170-244.0-10 138.00 5.0 153.00 187.00 1 244.0 6.4 0.108
1N6301A 1.5KE170A 170-234.0-5 145.00 5.0 162.00 179.00 1 234.0 6.7 0.108
1N6302 1.5KE180 180-256.0-10 146.00 5.0 162.00 198.00 1 256.0 6.1 0.108
1N6302A 1.5KE180A 180-246.0-5 154.00 5.0 171.00 189.00 1 246.0 6.4 0.108
1N6303 1.5KE200 200-287.0-10 162.00 5.0 180.00 220.00 1 287.0 5.4 0.108
1N6303A 1.5KE200A 200-274.0-5 171.00 5.0 190.00 210.00 1 274.0 5.7 0.108
N/A 1.5KE220 220-344.0-10 175.00 5.0 196.00 242.00 1 344.0 4.5 0.108
N/A 1.5KE220A 220-328.0-5 185.00 5.0 209.00 231.00 1 328.0 4.8 0.108
N/A 1.5KE250 250-360.0-10 202.00 5.0 225.00 275.00 1 360.0 4.3 0.110
N/A 1.5KE250A 250-344.0-5 214.00 5.0 237.00 263.00 1 344.0 4.5 0.110
N/A 1.5KE300 300-430.0-10 243.00 5.0 270.00 330.00 1 430.0 3.6 0.110
N/A 1.5KE300A 300-414.0-5 256.00 5.0 285.00 315.00 1 414.0 3.8 0.110
N/A 1.5KE350 350-504.0-10 284.00 5.0 315.00 385.00 1 504.0 3.1 0.110
N/A 1.5KE350A 350-482.0-5 300.00 5.0 333.00 368.00 1 482.0 3.2 0.110
N/A 1.5KE400 400-574.0-10 324.00 5.0 360.00 440.00 1 574.0 2.7 0.110
N/A 1.5KE400A 400-548.0-5 342.00 5.0 380.00 420.00 1 548.0 2.8 0.110
N/A 1.5KE440 440-598.0-10 356.00 5.0 396.00 484.00 1 598.0 2.4 0.110
N/A 1.5KE440A 440-590.0-5 376.00 5.0 418.00 462.00 1 590.0 2.6 0.110
TAB L E 11A - 1500 WATT TRAN S IE N T S U P P RE S S OR DIE E LE CTRICAL S P EC IFICATIONS (NOT E 1)
MAX . CLAMP ING
VOLTAGE (VCL)
@ PEAK PULSE
CURRE NT (IPP)
(NOT E 5)
REVERSE
BREAKDOW
N V O L TAG E
(VBR) @ IT
(NOT E 4)
INDU S T R Y
STANDARD
PAR T
NUMBERS REFER TO
PAGE 7 -16
FOR ORDER
S PE CIF IE R
12251 TOWNE LAKE DRIVE, FORT MYERS, FLORIDA, 33913 TEL: (941) 768-6800 FAX: (941) 768-6868
SUSSEX
SEMICONDUCTOR, INC.
1500 WATT TRANSIENT
SUPPRESSOR
DIE SPECIFICATIONS
7-16
0
50
100
150
0123
IPP
½ IPP
10:1000 WAVEFORM
% PEAK PULSE CURRENT, IPP
TIME (ms)
FIGURE 3A - PULSE DERATING CURVE
0
37 5
75 0
1125
1500
0 2 5 50 75 100 125 150 175 200
NON-REPETA TIVE
C URRENT PU LS E
PER FIGURE 2A
NON-REPETITIVE
CURRENT PULSE
PER FIG URE 2A
JUNCTION TEMPERA TURE, TJ (°C)
PEAK PULSE POWER (W ATTS)
FIGURE 2A - PULSE WAVEFORM
ORDERING SPECIFIER
6.8 - 10.8 - 10
ORDER CODE FROM
PREVIOUS PA GES
101
102
103
104
100101102103
Measure d @ 10 0mV
Measured @ Vso
Tj=25 C
f= 1 kH z
THIS GRAPH DEMONSTRATES THE
PERFORMANCE OF A UNIPOLAR DEVIC E.
BIPOLAR DE VICES WILL H A VE A LO WER
CAPACITANCE
CONTACT FACTORY FOR MORE
DETAILED IN FORMATION
BREAKDOWN VOL T AGE, VBR (Volts)
JUNCTION CAPACITANCE (pF)
FIGURE 1A - TYPICAL JUNCTION
CAPACITANCE
CO DE DIE TYPE DIE
SPECIFICATIONS
REFER TO:
SZU16 150 0 WATT UNIPOLAR DIE PAGE 7-1
SZZ16 1500 WAT T BIPOLAR DIE PAGE 7-2
SZUFD16 1500 WATT UNIPOLAR FLIP-DIE PAGE 7-3
SZZD16 1500 WATT BIPOLAR DUAL-DIE PAGE 7-4
TABLE 12A - AVAILABLE DIE SIZES
12251 TOWNE LAKE DRIVE, FORT MYERS, FLORIDA, 33913 TEL: (941) 768-6800 FAX: (941) 768-6868
SUSSEX
SEMICONDUCTOR, INC.
1500 WATT DIE
SPECIFICATIONS
CONTINUED