Preliminary Datasheet
Agilent AlInGaP chipLED
Package Dimensions
HSMX-C265
Notes:
1. Dimensions in mm.
2.
Tolerance ± 0.1 mm unless otherwise noted.
Device Selection Guide
Part Number Color Parts Per Reel
HSMA-C265 Amber 3000
HSMC-C265 Red 3000
HSML-C265 Orange 3000
HSMT-C265 Deep Red 3000
Agilent Technologies reserves the right to alter prices, specifications, features, capabilities, functions, release dates, and remove availability of the
product(s) at anytime.
Absolute Maximum Ratings at TA = 25°C
Parameter HSMA/C/L/T-C265 Units
DC Forward Current 25 mA
Power Dissipation 65 mW
Reverse Voltage (IR = 10µA) 5 V
LED Junction Temperature 95 °C
Operating Temperature Range -30 to +85 °C
Storage Temperature Range -40 to +85 °C
Soldering Temperature See soldering profile(Figure 1)
Reverse Voltage Testing (Tolerance: +/- 30%)
Electrical Characteristics at T = 25°C
A
Forward Voltage
V (Volts)
F
@ I = 20 mA
F
Part Number
Typ. Max.
Reverse
Breakdown
VR (Volts)
@ IR = 100 µA
Min.
HSMA/C/L/T-C265 1.9 2.6 5
Optical Characteristics at TA = 25°C
Luminous Intensity
I (mcd)
v
@ 20 mA[1]
Part Number
Min. Typ.
Peak
Wavelength λpeak
(nm) Typ.
Dominant
Wavelength λd
(nm) Typ[2].
HSMA-C265 28.5 75 595 592
HSMC-C265 28.5 75 637 626
HSML-C265 28.5 75 609 605
HSMT-C265 11.2 25 660 639
Notes:
1. The luminous intensity IV is measured at the peak of the spatial radiation pattern which may
not be aligned with the mechanical axis of the lamp package.
2. The dominant wavelength, λd, is derived from the CIE Chromaticity Diagram and represents the
perceived color of the device.
Agilent Technologies reserves the right to alter prices, specifications, features, capabilities, functions, release dates, and remove availability of the
product(s) at anytime.
2
Light Intensity (Iv) Bin Limit[1]
Intensity (mcd)
Bin ID Min. Max.
A 0.11 0.18
B 0.18 0.29
C 0.29 0.45
D 0.45 0.72
E 0.72 1.10
F 1.10 1.80
G 1.80 2.80
H 2.80 4.50
J 4.50 7.20
K 7.20 11.20
L 11.20 18.00
M 18.00 28.50
N 28.50 45.00
P 45.00 71.50
Q 71.50 112.50
R 112.50 180.00
S 180.00 285.00
T 285.00 450.00
U 450.00 715.00
V 715.00 1125.00
W 1125.00 1800.00
X 1800.00 2850.00
Y 2850.00 4500.00
Tolerance: ±15%
Note:
1. Bin categories are established for classification of products. Products may not be available
in all categories. Please contact your Agilent representative for information on currently
available bins.
Amber Color Bin Limits
Dominant Wavelength (nm)
Bin ID Min. Max.
A 582.0 584.5
B 584.5 587.0
C 587.0 589.5
D 589.5 592.0
E 592.0 594.5
F 594.5 597.0
Tolerance : + / - 1 nm
Red Color Bin Limits
Dominant Wavelength (nm)
Bin ID Min. Max.
- 615.0 630.0
Tolerance : + / - 1 nm
Agilent Technologies reserves the right to alter prices, specifications, features, capabilities, functions, release dates, and remove availability of the
product(s) at anytime.
3
Orange Color Bin Limits
Dominant Wavelength (nm)
Bin ID Min. Max.
A 597.0 600.0
B 600.0 603.0
C 603.0 606.0
D 606.0 609.0
E 609.0 612.0
F 612.0 615.0
Tolerance : + / - 1 nm
Deep Red Color Bin Limits
Dominant Wavelength (nm)
Bin ID Min. Max.
- 635.0 646.0
Tolerance : + / - 1 nm
TEMPERATURE
TIME
10 SEC. MAX.
230oC MAX.
140-160oC4oC/SEC MAX.
OVER 2 MIN.
4oC/SEC MAX.
-3oC/SEC MAX.
Figure 1: Recommended Reflow Soldering Profile
Figure 2: Recommended Soldering Pattern
Agilent Technologies reserves the right to alter prices, specifications, features, capabilities, functions, release dates, and remove availability of the
product(s) at anytime.
4
Agilent Technologies reserves the right to alter prices, specifications, features, capabilities, functions, release dates, and remove availability of the
product(s) at anytime.
5
Figure 3: Tape Dimensions
THERE SHALL BE A MINIMUM OF
160mm (6.3in.) OF EMPTY
COMPONENT POCKETS SEALED
WITH COVER TAPE.
MOUNTED WITH
COMPONENTS.
THERE SHALL BE A MINIMUM OF
160mm (6.3in.) OF EMPTY
COMPONENT POCKETS SEALED
WITH COVER TAPE.
MINIMUM OF
230mm
(9.05in.) MAY
CONSIST OF
CARRIER
AND/OR
COVER TAPE
END START
Convective IR Reflow
Soldering
For more information on IR
reflow soldering, refer to
Application Note 1060,
Surface Mounting SMT LED
Indicator Components.
Storage Condition : 5
to 30 OC @ 60%RH max.
Baking is required under
the condition :
a) the blue silica gel
indicator becoming
white / transparent
color
b) the pack has been open
for more than 1 week
Baking recommended
condition : 60 ± 5 OC for
20 hrs
Figure 4: Tape Leader and Trailer Dimensions.
Notes:
1. All dimensions in millimeters (inches).
2.
Tolerance is ± 0.1 mm (± 0.004 in.) unless otherwise specified.
www.semiconductor.agilent.com
Data subject to change.
Copyright 2003 Agilent Technologies, Inc.
Revision Date: xx-xx-xxxx
