Preliminary Datasheet Agilent AlInGaP chipLED Package Dimensions HSMX-C265 Notes: 1. Dimensions in mm. 2. Tolerance 0.1 mm unless otherwise noted. Device Selection Guide Part Number HSMA-C265 HSMC-C265 HSML-C265 HSMT-C265 Color Amber Red Orange Deep Red Parts Per Reel 3000 3000 3000 3000 Agilent Technologies reserves the right to alter prices, specifications, features, capabilities, functions, release dates, and remove availability of the product(s) at anytime. Absolute Maximum Ratings at TA = 25C Parameter DC Forward Current Power Dissipation Reverse Voltage (IR = 10A) LED Junction Temperature Operating Temperature Range Storage Temperature Range Soldering Temperature HSMA/C/L/T-C265 Units 25 mA 65 mW 5 V 95 C -30 to +85 C -40 to +85 C See soldering profile(Figure 1) Reverse Voltage Testing (Tolerance: +/- 30%) Electrical Characteristics at TA = 25C Forward Voltage Reverse VF (Volts) Breakdown @ IF = 20 mA VR (Volts) Part Number Typ. Max. @ IR = 100 A Min. 1.9 2.6 HSMA/C/L/T-C265 5 Optical Characteristics at TA = 25C Part Number HSMA-C265 HSMC-C265 HSML-C265 HSMT-C265 Luminous Intensity Iv (mcd) @ 20 mA[1] Min. 28.5 28.5 28.5 11.2 Typ. 75 75 75 25 Peak Wavelength peak (nm) Typ. Dominant Wavelength d (nm) Typ[2]. 595 637 609 660 592 626 605 639 Notes: 1. The luminous intensity IV is measured at the peak of the spatial radiation pattern which may not be aligned with the mechanical axis of the lamp package. 2. The dominant wavelength, d, is derived from the CIE Chromaticity Diagram and represents the perceived color of the device. Agilent Technologies reserves the right to alter prices, specifications, features, capabilities, functions, release dates, and remove availability of the product(s) at anytime. 2 Light Intensity (Iv) Bin Limit[1] Bin ID A B C D E F G H J K L M N P Q R S T U V W X Y Intensity (mcd) Min. Max. 0.11 0.18 0.18 0.29 0.29 0.45 0.45 0.72 0.72 1.10 1.10 1.80 1.80 2.80 2.80 4.50 4.50 7.20 7.20 11.20 11.20 18.00 18.00 28.50 28.50 45.00 45.00 71.50 71.50 112.50 112.50 180.00 180.00 285.00 285.00 450.00 450.00 715.00 715.00 1125.00 1125.00 1800.00 1800.00 2850.00 2850.00 4500.00 Tolerance: 15% Note: 1. Bin categories are established for classification of products. Products may not be available in all categories. Please contact your Agilent representative for information on currently available bins. Amber Color Bin Limits Dominant Wavelength (nm) Bin ID Min. Max. A 582.0 584.5 B 584.5 587.0 C 587.0 589.5 D 589.5 592.0 E 592.0 594.5 F 594.5 597.0 Tolerance : + / - 1 nm Red Color Bin Limits Dominant Wavelength (nm) Bin ID Min. Max. 615.0 630.0 Tolerance : + / - 1 nm Agilent Technologies reserves the right to alter prices, specifications, features, capabilities, functions, release dates, and remove availability of the product(s) at anytime. 3 Orange Color Bin Limits Dominant Wavelength (nm) Bin ID Min. Max. A 597.0 600.0 B 600.0 603.0 C 603.0 606.0 D 606.0 609.0 E 609.0 612.0 F 612.0 615.0 Tolerance : + / - 1 nm Deep Red Color Bin Limits Dominant Wavelength (nm) Bin ID Min. Max. 635.0 646.0 Tolerance : + / - 1 nm 10 SEC. MAX. TEMPERATURE 230oC MAX. 140-160oC 4oC/SEC MAX. -3oC/SEC MAX. 4oC/SEC MAX. OVER 2 MIN. TIME Figure 1: Recommended Reflow Soldering Profile Figure 2: Recommended Soldering Pattern Agilent Technologies reserves the right to alter prices, specifications, features, capabilities, functions, release dates, and remove availability of the product(s) at anytime. 4 Figure 3: Tape Dimensions END Convective IR Reflow Soldering START For more information on IR reflow soldering, refer to Application Note 1060, Surface Mounting SMT LED Indicator Components. THERE SHALL BE A MINIMUM OF 160mm (6.3in.) OF EMPTY COMPONENT POCKETS SEALED WITH COVER TAPE. MOUNTED WITH COMPONENTS. THERE SHALL BE A MINIMUM OF 160mm (6.3in.) OF EMPTY COMPONENT POCKETS SEALED WITH COVER TAPE. MINIMUM OF 230mm (9.05in.) MAY CONSIST OF CARRIER AND/OR COVER TAPE Figure 4: Tape Leader and Trailer Dimensions. Storage Condition : 5 to 30 OC @ 60%RH max. Baking is required under the condition : a) the blue silica gel indicator becoming white / transparent color b) the pack has been open for more than 1 week Baking recommended condition : 60 5 OC for 20 hrs Notes: 1. All dimensions in millimeters (inches). 2. Tolerance is 0.1 mm ( 0.004 in.) unless otherwise specified. www.semiconductor.agilent.com Data subject to change. Copyright 2003 Agilent Technologies, Inc. Revision Date: xx-xx-xxxx Agilent Technologies reserves the right to alter prices, specifications, features, capabilities, functions, release dates, and remove availability of the product(s) at anytime. 5