P6SMB68A - MULTICOMP - searchdatasheet.com

P6SMB Series

Page <1> 19/05/08 V1.1

Features:

•For surface mounted application in order to optimize board space.

•Low profile package.

•Built-in strain relief.

•Glass passivated junction.

•Excellent clamping capability.

•Fast response time: typically less than 1.0ps from 0 volt to BV minimum.

•Typical IRless than 1µA above 10V.

•High temperature soldering guaranteed: 260°C/10 seconds at terminals.

•Plastic material used carries.

•600 watts peak pulse power capability with a 10 x 1000µs waveform by 0.01% duty cycle.

Mechanical Data

Case : Molded plastic

Terminals : Pure tin plated lead free.

Polarity : Indicated by cathode band.

Standard packaging : 12mm tape (EIA STD RS-481).

Weight : 0.093 gram.

Maximum Ratings and Electrical Characteristics

Rating at 25°C ambient temperature unless otherwise specified.

SMB/DO-214AA

Dimensions : Inches (Millimetres)

P6SMB Series

Page <2> 19/05/08 V1.1

Type Number Symbol Value Units

Peak Power Dissipation at TA= 25°C, Tp= 1ms (Note 1) PPK Minimum 600 Watts

Steady State Power Dissipation PD3

Peak Forward Surge Current, 8.3ms Single Half

Sine-wave Superimposed on Rated Load

(JEDEC method) (Note 2, 3) - Unidirectional Only IFSM 100 Amps

Maximum Instantaneous Forward Voltage at 50.0A for

Unidirectional Only (Note 4) VF3.5/5.0 Volts

Typical Thermal Resistance (Note 5) RθJC

RθJA

55 °C/W

Operating and Storage Temperature Range TJ, TSTG -65 to + 150 °C

Ratings and Characteristic Curves

Peak Pulse Power Rating Curve

PPPM, Peak Pulse Power, KW

tp, Pulse Width, sec.

Notes: 1. Non-repetitive current pulse and derated above TA= 25°C.

2. Mounted on 5.0mm2(0.013mm thick) copper pads to each terminal.

3. 8.3ms single half sine-wave or equivalent square wave, duty cycle = 4 pulses per minutes maximum.

4. VF = 3.5V on P6SMB6.8 thru P6SMB91 devices and VF = 5.0V on P6SMB100 thru P6SMB220 devices.

5. Measured on P.C.B. with 0.27 x 0.27 Inch (7.0 x 7.0mm) copper pad areas.

Devices for bipolar applications

1. For bidirectional use C or CA suffix for types P6SMB6.8 through types P6SMB220A.

2. Electrical characteristics apply in both directions.

Pulse Derating Curve

TAAmbient Temperature, °C

Peak Pulse Power (PPP) or Current

(IPPM) Derating In Percentage, %

P6SMB Series

Page <3> 19/05/08 V1.1

Maximum Non-Repetitive Forward Surge

Current Unidirectional Only

Number of Cycles at 60Hz

IFSM, Peak Forward Surge Current,

Amperes

CJ, Junction Capacitance (pF)

Typical Junction Capacitance

(Unidirectional)

V (BR), Breakdown Voltage Volts

t, Time, ms

Peak Pulse Current - %

Clamping Power Pulse Waveform

P6SMB Series

Page <4> 19/05/08 V1.1

Electrical Characteristics (TA= 25°C unless otherwise noted)

Device Device

Marking

Code

Breakdown Voltage

Test

Current

at IT

(mA)

Stand-Off

Voltage

VWM

(Volts)

Maximum

Reverse

Leakage

at VWM

ID(µµA)

Maximum

Peak

Pulse

Current IRSM

(Note 2)

(Amps)

Maximum

Clamping

Voltage

at IPPM

VC (Volts)

Maximum

Temperature

Coefficient

of VBR (%/°C)

VBR (Volts) (Note 1)

Minimum Maximum

Unidirectional Bidirectional

P6SMB100A P6SMB100CA MXJ 95.0 105.0

1.0

85.5 5.0 4.5 137.0 0.106

P6SMB10A P6SMB10CA KPJ 9.50 10.5 8.55 10.0 43.0 14.5 0.073

P6SMB150A P6SMB150CA NKJ 143.0 158.0 128.0

5.0

3.0 207.0 0.108

P6SMB18A P6SMB18CA LEJ 17.1 18.9 15.3 25.0 25.2 0.088

P6SMB200A P6SMB200CA NTJ 190.0 210.0 171.0 2.2 274.0 0.108

P6SMB22A P6SMB22CA LKJ 20.9 23.1 18.8 20.0 30.6 0.092

P6SMB27A P6SMB27CA LPJ 25.7 28.4 23.1 16.8 37.5 0.096

P6SMB33A P6SMB33CA LTJ 31.4 34.7 28.2 13.8 45.7 0.098

P6SMB36A P6SMB36CA LVJ 34.2 37.8 30.8 12.6 49.9 0.099

P6SMB39A P6SMB39CA LXJ 37.1 41.0 33.3 11.6 53.9 0.100

P6SMB47A P6SMB47CA MEJ 44.7 49.4 40.2 9.7 64.8 0.101

P6SMB62A P6SMB62CA MMJ 58.9 65.1 53.0 7.4 85.0 0.104

P6SMB68A P6SMB68CA MPJ 64.6 71.4 58.1 6.8 92.0

P6SMB6V8A P6SMB6V8CA KEJ 6.45 7.14 10.0 5.80 1000.0 60.0 10.5 0.057

Notes:

1. VBR measured after ITapplied for 300µs, IT= square wave pulse or equivalent.

2. Surge current waverform and derate.

3. For bipolar types having VWM of 10 volts and under, the IDlimit is doubled.

4. For bidirectional use C or CA suffix for types P6SMB6.8 through P6SMB220A.

5. All terms and symbols are consistent with ANSI/IEEE C62.35.

For enquiries from all other markets

P6SMB Series

Page <5> 19/05/08 V1.1

Notes:

International Sales Offices:

AUSTRALIA – Farnell

Tel No: ++61 1300 361 005

Fax No: ++61 1300 361 225

FRANCE – Farnell

Tel No: ++ 33 474 68 99 99

Fax No: ++ 33 474 68 99 90

NORWAY – Farnell

Tel No: 800 146 70

Fax No: 800 146 76

AUSTRIA – Farnell

Tel No: ++ 43 662 2180 680

Fax No: ++ 43 662 2180 670

GERMANY – Farnell

Tel No: ++ 49 89 61 39 39 39

Fax No: ++ 49 89 613 59 01

PORTUGAL – Farnell

Tel No: ++ 34 93 475 8804

Fax No: ++ 34 93 474 5288

RUSSIA – Farnell

Tel No: ++ 44 870 1200 208

Fax No: ++ 44 870 1200 209

ESTONIA – Farnell

Tel No: ++ 358 9 560 7780

Fax No: ++ 358 9 345 5411

NETHERLANDS

– Farnell

Tel No: ++ 31 30 241 7373

Fax No: ++ 31 30 241 7333

UK – Farnell

Tel No: ++ 44 8701 200 200

Fax No: ++ 44 8701 200 201

SINGAPORE

–

Farnell-Newark

Tel No: ++ 65 6788 0200

Fax No: ++ 65 6788 0300

HONG KONG

–

Farnell-Newark

Tel No: ++ 852 2268 9888

Fax No: ++ 852 2268 9899

HUNGARY

- Farnell

Tel No: ++ 44 870 1200 208

Fax No: ++ 44 870 1200 209

BELGIUM – Farnell

Tel No: ++ 32 3 475 2810

Fax No: ++ 32 3 227 3648

BRAZIL – Farnell-Newark

Tel No: ++ 55 11 4066 9400

Fax No: ++ 55 11 4066 9410

IRELAND – Farnell

Tel No: ++ 353 1 830 9277

Fax No: ++ 353 1 830 9016

INDIA

- Farnell

Tel No: ++ 44 870 1200 208

Fax No: ++ 44 870 1200 209

ISRAEL – Farnell

Tel No: ++ 180 937 0015

Fax No: ++ 180 937 0014

SPAIN – Farnell

Tel No: 901 20 20 80

Fax No: 901 20 20 90

CHINA – Farnell-Newark

Tel No: ++86 10 6238 5152

Fax No: ++86 10 6238 5022

CZECH REPUBLIC

- Farnell

Tel No: ++ 44 870 1200 208

Fax No: ++ 44 870 1200 209

ITALY – Farnell

Tel No: ++ 39 02 93 995 200

Fax No: ++ 39 02 93 995 300

SWEDEN – Farnell

Tel No: ++ 46 8 730 50 00

Fax No: ++ 46 8 83 52 62

MALAYSIA –

Farnell-Newark

Tel No: ++ 60 3 7873 8000

Fax No: ++ 60 3 7873 7000

SWITZERLAND

– Farnell

Tel No: ++ 44 204 64 64

Fax No: ++ 44 204 64 54

DENMARK – Farnell

Tel No: ++ 45 44 53 66 44

Fax No: ++ 45 44 53 66 06

UK –CPC

++ 44 8701 202 530

++ 44 8701 202 531

USA –

Newark

Tel No: 800 463 9275

NEW ZEALAND

– Farnell

Tel No: 0800 90 80 80

Fax No: 0800 90 80 81

EXPORT – Farnell

Tel No: ++ 44 8701 200 208

Fax No: ++ 44 8701 200 209

export

FINLAND – Farnell

Tel No: ++ 358 9 560 7780

Fax No: ++ 358 9 345 5411

Disclaimer This data sheet and its contents (the "Information") belong to the Premier Farnell Group (the "Group") or ar e licensed to it. No licence is granted for the use of it other than for information purposes

in connection with the products to which it relates. No licence of any intellectual pr operty rights is granted. The Information is subject to change without notice and r eplaces all data sheets previously supplied.

The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use made of it. Users of this data

sheet should check for themselves the Information and the suitability of the products for their purpose and not make any assumptions based on information included or omitted. Liability for loss or damage

resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the Group was aware of the possibility of such loss or damage arising) is excluded.

This will not operate to limit or restrict the Group's liability for death or personal injury resulting from its negligence. SPC Multicomp is the registered trademark of the Group. © Premier Farnell plc 2008.

http://www.farnell.com

http://www.newark.com

http://www.cpc.co.uk