P6SMB Series Features: * * * * * * * * * * For surface mounted application in order to optimize board space. Low profile package. Built-in strain relief. Glass passivated junction. Excellent clamping capability. Fast response time: typically less than 1.0ps from 0 volt to BV minimum. Typical IR less than 1A above 10V. High temperature soldering guaranteed: 260C/10 seconds at terminals. Plastic material used carries. 600 watts peak pulse power capability with a 10 x 1000s waveform by 0.01% duty cycle. SMB/DO-214AA Dimensions : Inches (Millimetres) Mechanical Data Case Terminals Polarity Standard packaging Weight : : : : : Molded plastic Pure tin plated lead free. Indicated by cathode band. 12mm tape (EIA STD RS-481). 0.093 gram. Maximum Ratings and Electrical Characteristics Rating at 25C ambient temperature unless otherwise specified. Page <1> 19/05/08 V1.1 P6SMB Series Type Number Symbol Value Peak Power Dissipation at TA = 25C, Tp = 1ms (Note 1) PPK Minimum 600 Steady State Power Dissipation PD 3 IFSM 100 Amps Maximum Instantaneous Forward Voltage at 50.0A for Unidirectional Only (Note 4) VF 3.5/5.0 Volts Typical Thermal Resistance (Note 5) RJC RJA Peak Forward Surge Current, 8.3ms Single Half Sine-wave Superimposed on Rated Load (JEDEC method) (Note 2, 3) - Unidirectional Only TJ, TSTG Operating and Storage Temperature Range Notes: Units Watts 10 55 C/W -65 to + 150 C 1. Non-repetitive current pulse and derated above TA = 25C. 2. Mounted on 5.0mm2 (0.013mm thick) copper pads to each terminal. 3. 8.3ms single half sine-wave or equivalent square wave, duty cycle = 4 pulses per minutes maximum. 4. VF = 3.5V on P6SMB6.8 thru P6SMB91 devices and VF = 5.0V on P6SMB100 thru P6SMB220 devices. 5. Measured on P.C.B. with 0.27 x 0.27 Inch (7.0 x 7.0mm) copper pad areas. Devices for bipolar applications 1. For bidirectional use C or CA suffix for types P6SMB6.8 through types P6SMB220A. 2. Electrical characteristics apply in both directions. Ratings and Characteristic Curves Pulse Derating Curve PPPM, Peak Pulse Power, KW Peak Pulse Power (PPP) or Current (IPPM) Derating In Percentage, % Peak Pulse Power Rating Curve tp, Pulse Width, sec. TA Ambient Temperature, C Page <2> 19/05/08 V1.1 P6SMB Series Maximum Non-Repetitive Forward Surge Current Unidirectional Only Peak Pulse Current - % IFSM, Peak Forward Surge Current, Amperes Clamping Power Pulse Waveform t, Time, ms Number of Cycles at 60Hz CJ, Junction Capacitance (pF) Typical Junction Capacitance (Unidirectional) V (BR), Breakdown Voltage Volts Page <3> 19/05/08 V1.1 P6SMB Series Electrical Characteristics (TA = 25C unless otherwise noted) Breakdown Voltage Device Unidirectional Bidirectional Maximum Maximum Test Stand-Off Reverse Peak Device VBR (Volts) (Note 1) Current Voltage Pulse Leakage Marking at IT VWM at VWM Current IRSM Code (mA) (Volts) (Note 2) A) ID ( Minimum Maximum (Amps) Maximum Clamping Maximum Voltage Temperature Coefficient at IPPM of VBR (%/C) VC (Volts) P6SMB100A P6SMB100CA MXJ 95.0 105.0 85.5 5.0 4.5 137.0 0.106 P6SMB10A KPJ 9.50 10.5 8.55 10.0 43.0 14.5 0.073 P6SMB150A P6SMB150CA NKJ 143.0 158.0 128.0 3.0 207.0 0.108 P6SMB18A LEJ 17.1 18.9 15.3 25.0 25.2 0.088 P6SMB200A P6SMB200CA NTJ 190.0 210.0 171.0 2.2 274.0 0.108 P6SMB22A P6SMB22CA LKJ 20.9 23.1 18.8 20.0 30.6 0.092 P6SMB27A P6SMB27CA LPJ 25.7 28.4 23.1 16.8 37.5 0.096 P6SMB33A P6SMB33CA LTJ 31.4 34.7 28.2 13.8 45.7 0.098 P6SMB36A P6SMB36CA LVJ 34.2 37.8 30.8 12.6 49.9 0.099 P6SMB39A P6SMB39CA LXJ 37.1 41.0 33.3 11.6 53.9 0.100 P6SMB47A P6SMB47CA MEJ 44.7 49.4 40.2 9.7 64.8 0.101 P6SMB62A P6SMB62CA MMJ 58.9 65.1 53.0 7.4 85.0 P6SMB68A P6SMB68CA MPJ 64.6 71.4 58.1 6.8 92.0 KEJ 6.45 7.14 60.0 10.5 P6SMB10CA P6SMB18CA 1.0 5.0 0.104 P6SMB6V8A P6SMB6V8CA 10.0 5.80 1000.0 0.057 Notes: 1. VBR measured after IT applied for 300s, IT = square wave pulse or equivalent. 2. Surge current waverform and derate. 3. For bipolar types having VWM of 10 volts and under, the ID limit is doubled. 4. For bidirectional use C or CA suffix for types P6SMB6.8 through P6SMB220A. 5. All terms and symbols are consistent with ANSI/IEEE C62.35. Page <4> 19/05/08 V1.1 P6SMB Series Notes: International Sales Offices: AUSTRALIA - Farnell FINLAND - Farnell ITALY - Farnell SPAIN - Farnell Tel No: Tel No: Tel No: Tel No: ++61 1300 361 005 ++ 358 9 560 7780 ++ 39 02 93 995 200 901 20 20 80 Fax No: ++61 1300 361 225 Fax No: ++ 358 9 345 5411 Fax No: ++ 39 02 93 995 300 Fax No: 901 20 20 90 AUSTRIA - Farnell FRANCE - Farnell SWEDEN - Farnell Tel No: Tel No: Fax No: ++ 43 662 2180 670 Fax No: ++ 33 474 68 99 90 MALAYSIA - Farnell-Newark Tel No: ++ 60 3 7873 8000 Fax No: ++ 60 3 7873 7000 BELGIUM - Farnell GERMANY - Farnell NETHERLANDS - Farnell SWITZERLAND - Farnell Tel No: Tel No: Tel No: ++ 43 662 2180 680 ++ 33 474 68 99 99 Tel No: ++ 46 8 730 50 00 Fax No: ++ 46 8 83 52 62 Fax No: ++ 32 3 227 3648 Fax No: ++ 49 89 613 59 01 Fax No: ++ 31 30 241 7333 Tel No: ++ 44 204 64 64 Fax No: ++ 44 204 64 54 BRAZIL - Farnell-Newark HONG KONG - NEW ZEALAND - Farnell UK - Farnell Tel No: Tel No: ++ 32 3 475 2810 ++ 49 89 61 39 39 39 ++ 31 30 241 7373 ++ 55 11 4066 9400 Farnell-Newark Tel No: ++ 852 2268 9888 Fax No: ++ 55 11 4066 9410 Fax No: ++ 852 2268 9899 Fax No: 0800 90 80 81 Fax No: ++ 44 8701 200 201 CHINA - Farnell-Newark HUNGARY - Farnell NORWAY - Farnell UK - CPC Tel No: Tel No: Tel No: 800 146 70 ++ 44 8701 202 530 Tel No: ++86 10 6238 5152 ++ 44 870 1200 208 0800 90 80 80 ++ 44 8701 200 200 Fax No: ++86 10 6238 5022 Fax No: ++ 44 870 1200 209 Fax No: 800 146 76 ++ 44 8701 202 531 CZECH REPUBLIC - Farnell INDIA - Farnell PORTUGAL - Farnell USA - Tel No: Tel No: Tel No: ++ 44 870 1200 208 ++ 44 870 1200 208 Fax No: ++ 44 870 1200 209 Fax No: ++ 44 870 1200 209 Fax No: ++ 34 93 474 5288 DENMARK - Farnell IRELAND - Farnell RUSSIA - Farnell Tel No: Tel No: Tel No: ++ 45 44 53 66 44 Fax No: ++ 45 44 53 66 06 ++ 353 1 830 9277 ++ 44 870 1200 208 Fax No: ++ 44 870 1200 209 Fax No: ++ 353 1 830 9016 Newark ++ 34 93 475 8804 Tel No: export 800 463 9275 EXPORT - Farnell Tel No: ++ 44 8701 200 208 Fax No: ++ 44 8701 200 209 For enquiries from all other markets ESTONIA - Farnell ISRAEL - Farnell Tel No: Tel No: ++ 358 9 560 7780 Fax No: ++ 358 9 345 5411 SINGAPORE - Farnell-Newark Tel No: ++ 65 6788 0200 ++ 180 937 0015 Fax No: ++ 180 937 0014 Fax No: ++ 65 6788 0300 http://www.farnell.com http://www.newark.com http://www.cpc.co.uk Disclaimer This data sheet and its contents (the "Information") belong to the Premier Farnell Group (the "Group") or are licensed to it. No licence is granted for the use of it other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change without notice and replaces all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make any assumptions based on information included or omitted. Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the Group was aware of the possibility of such loss or damage arising) is excluded. This will not operate to limit or restrict the Group's liability for death or personal injury resulting from its negligence. SPC Multicomp is the registered trademark of the Group. (c) Premier Farnell plc 2008. Page <5> 19/05/08 V1.1