HITANO ENTERPRISE CORP. 1N5391G THRU 1N5399G TECHNICAL SPECIFICATIONS OF GLASS PASSIVATED RECTIFIER VOLTAGE RANGE - 50 to 1000 Volts CURRENT - 1.5 Amperes FEATURES * Low cost * Low leakage * Low forward voltage drop * High current capability DO-15 MECHANICAL DATA * Case: Molded plastic * Epoxy: UL 94V-0 rate flame retardant * Lead : MIL-STD-202E, Method 208 guaranteed * Polarity: Color band denotes cathode end * Mounting position: Any * Weight: 0.38 gram MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS o Ratings at 25 C ambient temperature unless otherwise specified. Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. Dimensions in inches and (millimeters) SYMBOL 1N5391G 1N5392G 1N5393G 1N5395G 1N5397G 1N5398G 1N5399G UNITS Maximum Recurrent Peak Reverse Voltage VRRM 50 100 200 400 600 800 1000 Volts Maximum RMS Voltage VRMS 35 70 140 280 420 560 700 Volts Maximum DC Blocking Voltage Maximum Average Forward Rectified Current VDC 50 100 200 400 600 800 1000 Volts o at T L = 75 C Peak Forward Surge Current 8.3 ms single half sine-wave IO 1.5 Amps IFSM 50 Amps VF 1.4 Volts superimposed on rated load (JEDEC Method) Maximum Instantaneous Forward Voltage at 1.5A DC o @TA = 25 C Maximum DC Reverse Current at 5.0 uAmps o Rated DC Blocking Voltage @TA = 100 C Maximum Full Load Reverse Current Average, Full Cycle 500 IR 30 o uAmps .375*(9.5mm) lead length at T L = 75 C Typical Junction Capacitance (Note) Typical Thermal Resistance Operating and Storage Temperature Range CJ 20 RJA 50 TJ, TSTG -65 to + 175 Note : Measured at 1 MHZ and applied reverse voltage of 4.0 volts. pF 0 C/W 0 C RATING AND CHARACTERISTIC CURVES (1N5391G THRU 1N5399G)