TECHNICAL DATA SHEET | 1/2 STRAIGHT BULKHEAD JACK FULL CRIMP R164.331.200 PANEL SEAL CABLE 11/50 D Series : QN 6,5 max panel thickness G22 / 19/2 flats , hex 19/ flats | | | | 7,46 O11,4 5/8 x 24 UNEF 2A | | | 13.5/ 2 flats 26,5 22,45 A Ts mm Maxi} mini 16.3 16 13.9 | 13.6 oi Ech: 1 All dimensions are in mm. COMPONENTS | MATERIALS PLATINGS (um) BODY BRASS BBR 0.5 OVER SILVER 3 CENTER CONTACT BERYLLIUM COPPER SILVER 5 PASSIVATED OVER COPPER 0.5 OUTER CONTACT - INSULATOR PTFE GASKET SILICONE RUBBER OTHERS PARTS BRASS BBR 2 Issue : 0505 B In the effort to improve our products, we reserve the right to make changes judged to be R A D i A LL necessary. fq RADIALL | TECHNICAL DATA SHEET | 2/2 STRAIGHT BULKHEAD JACK FULL CRIMP R164.331.200 PANEL SEAL CABLE 11/50 D Series : QN PACKAGING SPECIFICATION Standard Unit Other 50 *W? option Contact us CABLE ASSEMBLY ELECTRICAL CHARACTERISTICS Stripping | a b c d f Impedance 30 mm {5.00 [8.00 [14.0 | 0.00 |9.00 | 0.00 Frequency 0-6* GHz VSWR 1.05 + 0.025 a EGE) Maxi Insertion loss 0.048 VF(GHz) dB Maxi . oe , : RF leakage -( &% (GHz)) dB Maxi Assembly instruction : Crimp 02 Voltage rating 1400 Veff Maxi Dielectric withstanding voltage 2500 Veff mini pecommmended cables) Insulation resistance 5000 MOQ mini KX 13 RG 235 MECHANICAL CHARACTERISTICS Characteristics indicated on this data sheet are those that can be achieved with the highest performance cable. Intrinsic limitations of the cable may diminish the performance of the assembly Cable retention Center contact retention - pull off 400 N mini Axial force Mating end 68 N mini - torque NA Nicm Axial force Opposite end 68 N mini Torque NA N.cm mini TOOLING Part Number | Description Hexagon Recommended torque : : : Mating NA N.cm R282.231.000 | CRIMPING TOOL | 2.54-10.54 Panel nut 500 N.cm R282,235.116 | CRIMPING DIES | 2.54-10.54 Clamp nut NA N.cm R282.293.000 | CRIMPING TOOL A/F clamp nut 19.000 mm oo. _. OTHERS CHARACTERISTICS Mating life 100 Cycles mini Weight 39.410 g * usable 0-11GHz **Connector only : -90dB DC<F<3GHz -80dB min 3<F<6GHz ENVIRONMENTAL Operating temperature -55/+125 C Hermetic seal NA Atm.cm3/s Panel leakage RUISS Issue : 0505 B In the effort to improve our products, we reserve the right to make changes judged to be necessary. . ol j RADIALL Crimp 02 : Full crimp COMPONENTS Ferrule Heatshring sleeve (option) Centre contact ba, A world of interconnect solutions STRIPPING DIMENSIONS 1 Slide the heatshrink sleeve onto the cable (Option). Slide the ferrule onto the cable. Strip the cable. 2 Slide the centre contact on uniil it bottoms against the cable dielectric. Crimp the centre contact with crimping tool ( see connector TDS ). 3 Fan the braid. geen als y 4 Slide the cable into the body until it bottoms against insulator. 5 Slide the ferrule over the braid. Crimp the ferrule with crimping tool (see connector TDS }. 6 Cut the excess of braid if necessary. Slide the sleeve over the ferrule and heatshrink it in place (Option).