SMBD914/MMBD914... Silicon Switching Diode * For high-speed switching applications * Pb-free (RoHS compliant) package 1) * Qualified according AEC Q101 SMBD914/MMBD914 ! Type SMBD914/MMBD914 Package SOT23 Configuration single Marking s5D Maximum Ratings at TA = 25C, unless otherwise specified Parameter Symbol Diode reverse voltage VR 100 Peak reverse voltage VRM 100 Forward current IF 250 Non-repetitive peak surge forward current IFSM Value Unit V mA A t = 1 s 4.5 t=1s 0.5 Ptot 370 mW Junction temperature Tj 150 C Storage temperature Tstg Thermal Resistance Parameter Symbol Value Unit Junction - soldering point 2) RthJS 260 K/W Total power dissipation TS 54C -65 ... 150 SMBD914/MMBD914 1Pb-containing 2For package may be available upon special request calculation of RthJA please refer to Application Note Thermal Resistance 1 2007-03-28 SMBD914/MMBD914... Electrical Characteristics at TA = 25C, unless otherwise specified Parameter Symbol Values min. typ. max. DC Characteristics 100 Breakdown voltage V(BR) Unit V I(BR) = 100 A Reverse current IR A VR = 20 V - - 0.025 VR = 75 V - - 0.1 VR = 20 V, TA = 150 C - - 30 VR = 75 V, TA = 150 C - - 50 Forward voltage mV VF IF = 1 mA - - 715 IF = 10 mA - - 855 IF = 50 mA - - 1000 IF = 100 mA - - 1200 IF = 150 mA - - 1250 CT - - 2 pF trr - - 4 ns AC Characteristics Diode capacitance VR = 0 V, f = 1 MHz Reverse recovery time IF = 10 mA, IR = 10 mA, measured at IR = 1mA , RL = 100 Test circuit for reverse recovery time D.U.T. F Pulse generator: tp = 100ns, D = 0.05, tr = 0.6ns, Ri = 50 Oscillograph Oscillograph: R = 50, tr = 0.35ns, C 1pF EHN00019 2 2007-03-28 SMBD914/MMBD914... Reverse current IR = (TA) Forward Voltage VF = (TA) IF = Parameter VR = Parameter 10 5 SMBD 914 1.0 nA V EHB00114 F = 100 mA VF 10 4 IR 10 mA 10 3 1 mA 0.5 0.1 mA 70 V 25 V 10 2 10 1 0 25 50 75 100 C 0 150 0 50 100 TA Forward current IF = (T S) TA = 25C SMBD914/MMBD914 EHB00137 300 mA mA 100 200 IF F SMBD 7000 150 TA Forward current IF = (VF) 150 C typ max 150 50 100 50 0 0 0.5 1.0 V 0 0 1.5 15 30 45 60 75 90 105 120 C 150 TS VF 3 2007-03-28 SMBD914/MMBD914... Permissible Puls Load RthJS = (tp) Permissible Pulse Load IFmax / I FDC = (t p) 10 3 10 2 I Fmax/IFDC K/W RthJS 10 2 0.5 0.2 0.1 0.05 0.02 0.01 0.005 D=0 10 1 10 0 10 -1 -7 10 10 -6 10 -5 10 -4 10 D=0 0.005 0.01 0.02 0.05 0.1 0.2 0.5 10 1 -3 10 -2 s 10 10 0 -7 10 0 tp 10 -6 10 -5 10 -4 10 -3 10 -2 s 10 0 tp 4 2007-03-28 Package SOT23 SMBD914/MMBD914... 0.4 +0.1 -0.05 1) 2 0.08...0.1 C 0.95 1.3 0.1 1 2.4 0.15 3 0.1 MAX. 10 MAX. B 1 0.1 10 MAX. 2.9 0.1 0.15 MIN. Package Outline A 5 0...8 1.9 0.2 0.25 M B C M A 1) Lead width can be 0.6 max. in dambar area Foot Print 0.8 0.9 1.3 0.9 0.8 1.2 Marking Layout (Example) Manufacturer EH s 2005, June Date code (YM) Pin 1 BCW66 Type code Standard Packing Reel o180 mm = 3.000 Pieces/Reel Reel o330 mm = 10.000 Pieces/Reel 4 0.2 8 2.13 2.65 0.9 Pin 1 1.15 3.15 5 2007-03-28 SMBD914/MMBD914... Edition 2006-02-01 Published by Infineon Technologies AG 81726 Munchen, Germany (c) Infineon Technologies AG 2007. All Rights Reserved. Attention please! The information given in this dokument shall in no event be regarded as a guarantee of conditions or characteristics ("Beschaffenheitsgarantie"). With respect to any examples or hints given herein, any typical values stated herein and/or any information regarding the application of the device, Infineon Technologies hereby disclaims any and all warranties and liabilities of any kind, including without limitation warranties of non-infringement of intellectual property rights of any third party. Information For further information on technology, delivery terms and conditions and prices please contact your nearest Infineon Technologies Office ( www.infineon.com). Warnings Due to technical requirements components may contain dangerous substances. For information on the types in question please contact your nearest Infineon Technologies Office. Infineon Technologies Components may only be used in life-support devices or systems with the express written approval of Infineon Technologies, if a failure of such components can reasonably be expected to cause the failure of that life-support device or system, or to affect the safety or effectiveness of that device or system. Life support devices or systems are intended to be implanted in the human body, or to support and/or maintain and sustain and/or protect human life. If they fail, it is reasonable to assume that the health of the user or other persons may be endangered. 6 2007-03-28