TPS76030, TPS76032, TPS76033, TPS76038, TPS76050 LOW-POWER 50-mA LOW-DROPOUT LINEAR REGULATORS SLVS144D - JULY 1998 - REVISED MAY 2001 D D D D D D D D DBV PACKAGE (TOP VIEW) 50-mA Low-Dropout Regulator Fixed Output Voltage Options: 5 V, 3.8 V, 3.3 V, 3.2 V, and 3 V Dropout Typically 120 mV at 50 mA Thermal Protection Less Than 1-A Quiescent Current in Shutdown -40C to 125C Operating Junction Temperature Range 5-Pin SOT-23 Package ESD Protection Verified to 1.5 kV Human Body Model (HBM) per MIL-STD-883C EN GND IN 3 2 1 4 5 NC OUT NC - No internal connection description The TPS760xx is a 50 mA, low dropout (LDO) voltage regulator designed specifically for battery-powered applications. A proprietary BiCMOS fabrication process allows the TPS760xx to provide outstanding performance in all specifications critical to battery-powered operation. The TPS760xx is available in a space-saving SOT-23 package and operates over a junction temperature range of -40C to 125C. AVAILABLE OPTIONS TJ VOLTAGE - 40C to 125C PART NUMBER SYMBOL 3V TPS76030DBVR PAGI 3.2 V TPS76032DBVR PAOI TPS76033DBVR PAHI 3.3 V PACKAGE SOT-23 3.8 V TPS76038DBVR PAJI 5V TPS76050DBVR PANI NOTE: The DBV package is available taped and reeled only. functional block diagram CS IN OUT EN Current Limit Vref + Thermal Sense GND Current sense Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. Copyright 2001, Texas Instruments Incorporated PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters. POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 1 TPS76030, TPS76032, TPS76033, TPS76038, TPS76050 LOW-POWER 50-mA LOW-DROPOUT LINEAR REGULATORS SLVS144D - JULY 1998 - REVISED MAY 2001 Terminal Functions TERMINAL NAME NO. EN 3 GND 2 IN 1 NC 4 OUT 5 I/O I DESCRIPTION Enable input Ground I Input voltage No connection O Regulated output voltage absolute maximum ratings over operating free-air temperature range (unless otherwise noted) Input voltage range, VI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -0.3 V to 16 V Voltage range at EN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -0.3 V to VI + 0.3 V Peak output current . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . internally limited Continuous total dissipation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . See Dissipation Rating Table Operating junction temperature range, TJ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -40C to 150C Storage temperature range, Tstg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -65C to 150C ESD rating, HBM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.5 kV Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. All voltages are with respect to device GND pin. DISSIPATION RATING TABLE BOARD PACKAGE RJC RJA DERATING FACTOR ABOVE TA = 25C TA 25C POWER RATING TA = 70C POWER RATING TA = 85C POWER RATING Low K High K DBV 65.8 C/W 259 C/W 3.9 mW/C 386 mW 212 mW 154 mW DBV 65.8 C/W 180 C/W 5.6 mW/C 555 mW 305 mW 222 mW The JEDEC Low K (1s) board design used to derive this data was a 3 inch x 3 inch, two layer board with 2 ounce copper traces on top of the board. The JEDEC High K (2s2p) board design used to derive this data was a 3 inch x 3 inch, multilayer board with 1 ounce internal power and ground planes and 2 ounce copper traces on top and bottom of the board. recommended operating conditions MIN Input voltage, VI MAX 3.2 16 TPS76032 3.4 16 TPS76033 3.5 16 TPS76038 4 16 TPS76050 5.2 16 Continuous output current, IO Operating junction temperature, TJ 2 NOM TPS76030 POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 UNIT V 0 50 mA - 40 125 C TPS76030, TPS76032, TPS76033, TPS76038, TPS76050 LOW-POWER 50-mA LOW-DROPOUT LINEAR REGULATORS SLVS144D - JULY 1998 - REVISED MAY 2001 electrical characteristics over recommended operating free-air temperature range, VI = VO(nom) + 1 V, IO = 1 mA, EN = VI, Co = 2.2 F (unless otherwise noted) PARAMETER TEST CONDITIONS TPS76030 TPS76032 TJ = 25C TJ = 25C, 1 mA < IO < 50 mA Output voltage TPS76033 2.91 3.07 TJ = 25C TJ = 25C, 3.16 1 mA < IO < 50 mA TJ = 25C TJ = 25C, 1 mA < IO < 50 mA TJ = 25C TJ = 25C, Standby current Vn 3.3 3.34 3.2 3.4 TJ = 25C TJ = 25C, 3.84 3.7 3.9 5 5.05 4.89 5.1 1 IO = 0 mA, IO = 0 mA TJ = 25C IO = 1 mA, IO = 1 mA TJ = 25C 100 IO = 10 mA, IO = 10 mA TJ = 25C 190 215 IO = 50 mA, IO = 50 mA TJ = 25C 850 1100 TPS76030 4 V < VI < 16, 10 4.2 V < VI < 16, 3 10 TPS76033 4.3 V < VI < 16, IO = 1 mA IO = 1 mA IO = 1 mA 3 TPS76032 3 10 TPS76038 4.8 V < VI < 16, 10 6 V < VI < 16, IO = 1 mA IO = 1 mA 3 TPS76050 3 10 130 A 1200 Ripple rejection f = 1 kHz, Co = 10 F, IO = 0 mA TJ = 25C IO = 0 mA Co = 10 F, TJ = 25C TJ = 25C 63 1 mV Vrms 190 dB 3 5 IO = 1 mA, IO = 1 mA TJ = 25C IO = 10 mA, IO = 10 mA TJ = 25C 40 60 IO = 50 mA IO = 50 mA TJ = 25C 120 150 7 10 15 mV 90 180 100 High level enable input 125 135 2 EN = 0 V -1 EN = VI * DALLAS, TEXAS 75265 mA V Low level enable input POST OFFICE BOX 655303 A 260 BW = 300 Hz to 50 kHz, Input current (EN) V 115 170 Peak output current/current limit II V 130 Output noise voltage Dropout voltage V 5.05 4.91 90 V 3.84 3.73 4.95 1 mA < IO < 50 mA 3.8 V 3.34 3.23 EN = 0 V Quiescent current (GND current) Input regulation 3.24 3.3 UNIT 3.24 3.1 3.76 1 mA < IO < 50 mA 3.2 3.13 3.26 1 mA < IO < 50 mA II(standby) 3.04 1 mA < IO < 50 mA 1 mA < IO < 50 mA TPS76050 MAX 3 3.04 1 mA < IO < 50 mA TPS76038 TYP 2.92 1 mA < IO < 50 mA VO MIN 2.96 0.8 V 0 1 A 2.5 5 A 3 TPS76030, TPS76032, TPS76033, TPS76038, TPS76050 LOW-POWER 50-mA LOW-DROPOUT LINEAR REGULATORS SLVS144D - JULY 1998 - REVISED MAY 2001 Table of Graphs FIGURE VO Zo VDO 4 Output voltage vs Output current 1, 2, 3 vs Free-air temperature 4, 5, 6 Ground current vs Free-air temperature 7, 8, 9 Output noise vs Frequency Output impedance vs Frequency 11 Dropout voltage vs Free-air temperature 12 10 Line transient response 13, 15 Load transient response 14, 16 POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 TPS76030, TPS76032, TPS76033, TPS76038, TPS76050 LOW-POWER 50-mA LOW-DROPOUT LINEAR REGULATORS SLVS144D - JULY 1998 - REVISED MAY 2001 TYPICAL CHARACTERISTICS TPS76030 TPS76033 OUTPUT VOLTAGE vs OUTPUT CURRENT OUTPUT VOLTAGE vs OUTPUT CURRENT 3.305 3.005 VI = 4 V TA = 25C 3.3 VO - Output Voltage - V 3 VO - Output Voltage - V VI = 4.3 V TA = 25C 2.995 2.99 2.985 2.98 3.295 3.29 3.285 3.28 3.275 3.27 2.975 0 10 20 30 40 50 0 60 10 20 Figure 1 50 40 60 Figure 2 TPS76050 TPS76030 OUTPUT VOLTAGE vs OUTPUT CURRENT OUTPUT VOLTAGE vs FREE-AIR TEMPERATURE 3.15 5.02 VI = 4 V VI = 6 V TA = 25C 3.1 VO - Output Voltage - V 5.01 VO - Output Voltage - V 30 IO - Output Current - mA IO - Output Current - mA 5 4.99 4.98 4.97 3.05 IO = 1 mA 3 IO = 50 mA 2.95 2.9 4.96 0 10 20 30 40 50 60 2.85 -55 -35 -15 5 25 45 65 85 105 125 TA - Free-Air Temperature - C IO - Output Current - mA Figure 3 Figure 4 POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 5 TPS76030, TPS76032, TPS76033, TPS76038, TPS76050 LOW-POWER 50-mA LOW-DROPOUT LINEAR REGULATORS SLVS144D - JULY 1998 - REVISED MAY 2001 TYPICAL CHARACTERISTICS TPS76033 TPS76050 OUTPUT VOLTAGE vs FREE-AIR TEMPERATURE OUTPUT VOLTAGE vs FREE-AIR TEMPERATURE 5.1 3.35 VI = 6 V VI = 4.3 V 5.08 IO = 1 mA 5.06 VO - Output Voltage - V VO - Output Voltage - V 3.3 IO = 50 mA 3.25 3.2 5.04 5.02 IO = 1 mA 5 4.98 IO = 50 mA 4.96 4.94 4.92 3.15 -55 -35 -15 5 25 45 65 85 105 4.9 -55 -35 125 TA - Free-Air Temperature - C -15 Figure 5 85 TPS76033 GROUND CURRENT vs FREE-AIR TEMPERATURE 105 125 105 125 10000 VI = 4.3 V IO = 50 mA Ground Current - A Ground Current - A 65 TPS76030 IO = 10 mA IO = 1 mA 10 -55 -35 -15 1000 IO = 50 mA IO = 10 mA 100 IO = 1 mA IO = 0 mA IO = 0 mA 5 25 45 65 85 105 125 10 -55 -35 -15 5 25 Figure 7 Figure 8 POST OFFICE BOX 655303 45 65 85 TA - Free-Air Temperature - C TA - Free-Air Temperature - C 6 45 GROUND CURRENT vs FREE-AIR TEMPERATURE VI = 4 V 100 25 Figure 6 10000 1000 5 TA - Free-Air Temperature - C * DALLAS, TEXAS 75265 TPS76030, TPS76032, TPS76033, TPS76038, TPS76050 LOW-POWER 50-mA LOW-DROPOUT LINEAR REGULATORS SLVS144D - JULY 1998 - REVISED MAY 2001 TYPICAL CHARACTERISTICS OUTPUT NOISE vs FREQUENCY TPS76050 GROUND CURRENT vs FREE-AIR TEMPERATURE 10 V Hz 10000 VI = 6 V 10 V Hz Output Noise Ground Current - A IO = 50 mA 1000 IO = 10 mA 100 IO = 1 mA 1 V Hz CL = 10 F IO = 50 mA 100 nV Hz IO = 0 mA 10 -55 -35 -15 CL = 2.2 F IO = 50 mA CL = 2.2 F IO = 1 mA CL = 10 F IO = 1 mA 5 25 45 85 65 105 125 10 nV Hz 250 1k 10k 100k f - Frequency - Hz TA - Free-Air Temperature - C Figure 9 Figure 10 TPS76030 OUTPUT IMPEDANCE vs FREQUENCY DROPOUT VOLTAGE vs FREE-AIR TEMPERATURE 150 CL = 2.2 F: IO = 1 mA IO = 10 mA IO = 50 mA 1 VI = EN = 2.9 V 50 mA 125 VDO - Dropout Voltage - mV Zo - Output Impedance - 10 CL = 10 F: IO = 1 mA IO = 10 mA CL = 10 F IO = 50 mA 100 75 10 mA 50 25 0.1 0.01 0.1 1 10 100 1000 0 -55 -35 0 mA -15 5 25 1 mA 45 65 85 105 125 TA - Free-Air Temperature - C f - Frequency - kHz Figure 11 Figure 12 POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 7 TPS76030, TPS76032, TPS76033, TPS76038, TPS76050 LOW-POWER 50-mA LOW-DROPOUT LINEAR REGULATORS SLVS144D - JULY 1998 - REVISED MAY 2001 TYPICAL CHARACTERISTICS TPS76033 LINE TRANSIENT RESPONSE TPS76033 LOAD TRANSIENT RESPONSE 100 VO - Change in Output Voltage - mV 20 0 -20 -30 I O - Output Current - mA VI - Input Voltage - V VO - Change in Output Voltage - mV 40 6 5 4 CO = 2.2 F 3 0 20 40 60 CO = 2.2 F 50 0 -50 -100 60 40 20 0 0 80 100 120 140 160 180 200 t - Time - s 20 40 60 Figure 14 Figure 13 TPS76050 LINE TRANSIENT RESPONSE VO - Change in Output Voltage - mV VO - Change in Output Voltage - mV 40 20 0 I O - Output Current - mA -20 VI - Input Voltage - V TPS76050 LOAD TRANSIENT RESPONSE 150 60 8 7 6 CO = 2.2 F 5 0 50 100 150 200 250 300 350 400 450 500 t - Time - s 100 50 0 CO = 2.2 F -50 60 40 20 0 0 20 40 60 80 100 120 140 160 180 200 t - Time - s Figure 16 Figure 15 8 80 100 120 140 160 180 200 t - Time - s POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 TPS76030, TPS76032, TPS76033, TPS76038, TPS76050 LOW-POWER 50-mA LOW-DROPOUT LINEAR REGULATORS SLVS144D - JULY 1998 - REVISED MAY 2001 APPLICATION INFORMATION 1 IN CI = 1 F EN 5 TPS760xx OUT Co = 2.2 F 3 2 GND Figure 17. TPS760xx Typical Application over current protection The over current protection circuit forces the TPS760xx into a constant current output mode when the load is excessive or the output is shorted to ground. Normal operation resumes when the fault condition is removed. An overload or short circuit may also activate the over temperature protection if the fault condition persists. over temperature protection The thermal protection system shuts the TPS760xx down when the junction temperature exceeds 160C. The device recovers and operates normally when the temperature drops below 155C. input capacitor A 0.047 F or larger ceramic decoupling capacitor with short leads connected between IN and GND is recommended. The decoupling capacitor may be omitted if there is a 1 F or larger electrolytic capacitor connected between IN and GND and located reasonably close to the TPS760xx. However, the small ceramic device is desirable even when the larger capacitor is present, if there is a lot of high frequency noise present in the system. output capacitor Like all low dropout regulators, the TPS760xx requires an output capacitor connected between OUT and GND to stabilize the internal control loop. The minimum recommended capacitance value is 2.2 F and the ESR (equivalent series resistance) must be between 0.1 and 20 . Capacitor values of 2.5-F or larger are acceptable, provided the ESR is less than 20 . Solid tantalum electrolytic, aluminum electrolytic, and multilayer ceramic capacitors are all suitable, provided they meet the requirements described above. Most of the commercially available 2.2-F surface-mount solid-tantalum capacitors, including devices from Sprague, Kemet, and Nichicon, meet the ESR requirements stated above. Multilayer ceramic capacitors should have minimum values of 2.5 F over the full operating temperature range of the equipment. enable (EN) A logic zero on the enable input shuts the TPS760xx off and reduces the supply current to less than 1 A. Pulling the enable input high causes normal operation to resume. If the enable feature is not used, EN should be connected to IN to keep the regulator on all of the time. The EN input must not be left floating. reverse current path The power transistor used in the TPS760xx has an inherent diode connected between IN and OUT as shown in the functional block diagram. This diode conducts current from the OUT terminal to the IN terminal whenever IN is lower than OUT by a diode drop. This condition does not damage the TPS760xx, provided the current is limited to 100 mA. POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 9 PACKAGE OPTION ADDENDUM www.ti.com 30-Jul-2011 PACKAGING INFORMATION Orderable Device Status (1) Package Type Package Drawing Pins Package Qty Eco Plan (2) Lead/ Ball Finish MSL Peak Temp TPS76030DBVR ACTIVE SOT-23 DBV 5 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TPS76030DBVRG4 ACTIVE SOT-23 DBV 5 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TPS76030DBVT ACTIVE SOT-23 DBV 5 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TPS76030DBVTG4 ACTIVE SOT-23 DBV 5 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TPS76032DBVR ACTIVE SOT-23 DBV 5 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TPS76032DBVRG4 ACTIVE SOT-23 DBV 5 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TPS76033DBVR ACTIVE SOT-23 DBV 5 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TPS76033DBVRG4 ACTIVE SOT-23 DBV 5 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TPS76033DBVT ACTIVE SOT-23 DBV 5 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TPS76033DBVTG4 ACTIVE SOT-23 DBV 5 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TPS76038DBVR ACTIVE SOT-23 DBV 5 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TPS76038DBVRG4 ACTIVE SOT-23 DBV 5 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TPS76038DBVT ACTIVE SOT-23 DBV 5 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TPS76038DBVTG4 ACTIVE SOT-23 DBV 5 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TPS76050DBVR ACTIVE SOT-23 DBV 5 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TPS76050DBVRG4 ACTIVE SOT-23 DBV 5 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TPS76050DBVT ACTIVE SOT-23 DBV 5 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Addendum-Page 1 (3) Samples (Requires Login) PACKAGE OPTION ADDENDUM www.ti.com Orderable Device TPS76050DBVTG4 30-Jul-2011 Status (1) ACTIVE Package Type Package Drawing SOT-23 DBV Pins 5 Package Qty 250 Eco Plan (2) Green (RoHS & no Sb/Br) Lead/ Ball Finish MSL Peak Temp (3) Samples (Requires Login) CU NIPDAU Level-1-260C-UNLIM (1) The marketing status values are defined as follows: ACTIVE: Product device recommended for new designs. LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect. NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design. PREVIEW: Device has been announced but is not in production. Samples may or may not be available. OBSOLETE: TI has discontinued the production of the device. (2) Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check http://www.ti.com/productcontent for the latest availability information and additional product content details. TBD: The Pb-Free/Green conversion plan has not been defined. Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes. Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and package, or 2) lead-based die adhesive used between the die and leadframe. The component is otherwise considered Pb-Free (RoHS compatible) as defined above. Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame retardants (Br or Sb do not exceed 0.1% by weight in homogeneous material) (3) MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature. Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis. Addendum-Page 2 PACKAGE MATERIALS INFORMATION www.ti.com 24-Sep-2011 TAPE AND REEL INFORMATION *All dimensions are nominal Device Package Package Pins Type Drawing SPQ Reel Reel A0 Diameter Width (mm) (mm) W1 (mm) TPS76030DBVR SOT-23 DBV 5 3000 180.0 9.0 B0 (mm) K0 (mm) P1 (mm) W Pin1 (mm) Quadrant 3.15 3.2 1.4 4.0 8.0 Q3 TPS76030DBVT SOT-23 DBV 5 250 180.0 9.0 3.15 3.2 1.4 4.0 8.0 Q3 TPS76032DBVR SOT-23 DBV 5 3000 180.0 9.0 3.15 3.2 1.4 4.0 8.0 Q3 TPS76033DBVR SOT-23 DBV 5 3000 178.0 9.0 3.23 3.17 1.37 4.0 8.0 Q3 TPS76033DBVT SOT-23 DBV 5 250 178.0 9.0 3.23 3.17 1.37 4.0 8.0 Q3 TPS76038DBVR SOT-23 DBV 5 3000 180.0 9.0 3.15 3.2 1.4 4.0 8.0 Q3 TPS76038DBVT SOT-23 DBV 5 250 180.0 9.0 3.15 3.2 1.4 4.0 8.0 Q3 TPS76050DBVR SOT-23 DBV 5 3000 178.0 9.0 3.23 3.17 1.37 4.0 8.0 Q3 TPS76050DBVT SOT-23 DBV 5 250 178.0 9.0 3.23 3.17 1.37 4.0 8.0 Q3 Pack Materials-Page 1 PACKAGE MATERIALS INFORMATION www.ti.com 24-Sep-2011 *All dimensions are nominal Device Package Type Package Drawing Pins SPQ Length (mm) Width (mm) Height (mm) TPS76030DBVR SOT-23 DBV 5 3000 182.0 182.0 20.0 TPS76030DBVT SOT-23 DBV 5 250 182.0 182.0 20.0 TPS76032DBVR SOT-23 DBV 5 3000 182.0 182.0 20.0 TPS76033DBVR SOT-23 DBV 5 3000 180.0 180.0 18.0 TPS76033DBVT SOT-23 DBV 5 250 180.0 180.0 18.0 TPS76038DBVR SOT-23 DBV 5 3000 182.0 182.0 20.0 TPS76038DBVT SOT-23 DBV 5 250 182.0 182.0 20.0 TPS76050DBVR SOT-23 DBV 5 3000 180.0 180.0 18.0 TPS76050DBVT SOT-23 DBV 5 250 180.0 180.0 18.0 Pack Materials-Page 2 IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications, enhancements, improvements, and other changes to its products and services at any time and to discontinue any product or service without notice. Customers should obtain the latest relevant information before placing orders and should verify that such information is current and complete. All products are sold subject to TI's terms and conditions of sale supplied at the time of order acknowledgment. TI warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with TI's standard warranty. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where mandated by government requirements, testing of all parameters of each product is not necessarily performed. TI assumes no liability for applications assistance or customer product design. Customers are responsible for their products and applications using TI components. To minimize the risks associated with customer products and applications, customers should provide adequate design and operating safeguards. TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right, copyright, mask work right, or other TI intellectual property right relating to any combination, machine, or process in which TI products or services are used. Information published by TI regarding third-party products or services does not constitute a license from TI to use such products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from TI under the patents or other intellectual property of TI. Reproduction of TI information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. Reproduction of this information with alteration is an unfair and deceptive business practice. TI is not responsible or liable for such altered documentation. Information of third parties may be subject to additional restrictions. Resale of TI products or services with statements different from or beyond the parameters stated by TI for that product or service voids all express and any implied warranties for the associated TI product or service and is an unfair and deceptive business practice. TI is not responsible or liable for any such statements. TI products are not authorized for use in safety-critical applications (such as life support) where a failure of the TI product would reasonably be expected to cause severe personal injury or death, unless officers of the parties have executed an agreement specifically governing such use. Buyers represent that they have all necessary expertise in the safety and regulatory ramifications of their applications, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any use of TI products in such safety-critical applications, notwithstanding any applications-related information or support that may be provided by TI. Further, Buyers must fully indemnify TI and its representatives against any damages arising out of the use of TI products in such safety-critical applications. TI products are neither designed nor intended for use in military/aerospace applications or environments unless the TI products are specifically designated by TI as military-grade or "enhanced plastic." Only products designated by TI as military-grade meet military specifications. Buyers acknowledge and agree that any such use of TI products which TI has not designated as military-grade is solely at the Buyer's risk, and that they are solely responsible for compliance with all legal and regulatory requirements in connection with such use. TI products are neither designed nor intended for use in automotive applications or environments unless the specific TI products are designated by TI as compliant with ISO/TS 16949 requirements. Buyers acknowledge and agree that, if they use any non-designated products in automotive applications, TI will not be responsible for any failure to meet such requirements. Following are URLs where you can obtain information on other Texas Instruments products and application solutions: Products Applications Audio www.ti.com/audio Communications and Telecom www.ti.com/communications Amplifiers amplifier.ti.com Computers and Peripherals www.ti.com/computers Data Converters dataconverter.ti.com Consumer Electronics www.ti.com/consumer-apps DLP(R) Products www.dlp.com Energy and Lighting www.ti.com/energy DSP dsp.ti.com Industrial www.ti.com/industrial Clocks and Timers www.ti.com/clocks Medical www.ti.com/medical Interface interface.ti.com Security www.ti.com/security Logic logic.ti.com Space, Avionics and Defense www.ti.com/space-avionics-defense Power Mgmt power.ti.com Transportation and Automotive www.ti.com/automotive Microcontrollers microcontroller.ti.com Video and Imaging RFID www.ti-rfid.com OMAP Mobile Processors www.ti.com/omap Wireless Connctivity www.ti.com/wirelessconnectivity TI E2E Community Home Page www.ti.com/video e2e.ti.com Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265 Copyright (c) 2011, Texas Instruments Incorporated