MAOC-011030 Voltage Controlled Oscillator 5.458 - 6.129 GHz Features Rev. V2 Block Diagram Low Phase Noise Wide Tuning Range Divide-by-Two Output Integrated Buffer Amplifier Excellent Temperature Stability +5V Bias Lead-Free 5 mm 32-Lead PQFN Package Halogen-Free "Green" Mold Compound RoHS* Compliant and 260C Reflow Compatible 32 31 30 29 28 27 26 25 (PIN 1) 24 2 23 3 22 4 21 5 20 Description 6 19 The MAOC-011030 is an InGaP HBT-based voltage controlled oscillator for frequency generation. No external matching components are required. This VCO is easily integrated into a phase lock loop using the divide-by-two output. The extremely low phase noise makes this part ideal for many radio applications including high capacity digital radios. 7 18 8 17 9 10 11 12 13 14 15 16 Pin Designations2 The MAOC-011030 primary applications are Point-to-Point Radio, Point-to-Multipoint Radio, Communications Systems, and Low Phase Noise applications. Pin Function Pin Function 1 N/C 17 N/C 2 N/C 18 N/C 3 N/C 19 RF The 5 mm PQFN package has a lead-free finish that is RoHS compliant and compatible with a 260C reflow temperature. The package also features low lead inductance and an excellent thermal path. 4 N/C 20 N/C 5 N/C 21 VCC 6 N/C 22 N/C 7 VBUFFER 23 N/C 8 N/C 24 N/C 9 N/C 25 N/C 10 N/C 26 N/C 11 N/C 27 N/C 12 RF/2 28 N/C 13 N/C 29 VTUNE 14 N/C 30 N/C 15 N/C 31 N/C 16 N/C 32 N/C Ordering Information1 Part Number Package MAOC-011030-TR0500 500 piece reel MAOC-011030-001SMB Sample Board 1. Reference Application Note M513 for reel size information. The exposed pad centered on the package bottom must be connected to RF and DC ground. Connecting all N/C pins to RF/DC Ground in the layout is also recommended. * Restrictions on Hazardous Substances, European Union Directive 2002/95/EC. 1 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macomtech.com for additional data sheets and product information. * North America Tel: 800.366.2266 / Fax: 978.366.2266 * Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 * Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 MAOC-011030 Voltage Controlled Oscillator 5.458 - 6.129 GHz Rev. V2 Electrical Specifications: TA = +25C, VCC = 5.0V3, Z0 = 50 Parameter Test Conditions Units Min. Typ. Max. Output Power RF Port, 5.458 - 6.129 GHz RF/2 Port, 2.729 - 3.0645 GHz dBm 10 0 14 4 -- SSB Phase Noise RF Port, 10 KHz Offset, 5.458 - 6.129 GHz RF Port, 100 KHz Offset, 5.458 - 6.129 GHz dBc/Hz -- -93 -117 -- -105 Harmonics/Subharmonics VCC=VBUFFER=VTUNE=5V RF Port, 1/2 Fo RF Port, 2 Fo dBc -- -27 -20 -- Pulling (Sensitivity to Match) VCC=VBUFFER=VTUNE=5V RF Port, VSWR = 1.95:1 to 2.25:1 MHz pk-pk -- 6.7 -- Pushing (Sensitivity to Supply Voltage) RF Port, VTUNE = 5 V RF/2 Port, VTUNE = 5 V MHz/V -- 10 5 -- Frequency Drift Rate (Sensitivity to Temperature) RF Port, 5.458 - 6.129 GHz RF/2 Port, 2.729 - 3.0645 GHz MHz/C -- 0.5 0.25 -- Output Return Loss RF Port, 5.458 - 6.129 GHz RF/2 Port, 2.729 - 3.0645 GHz dB -- 5 11 -- Tuning Sensitivity @ RF Port VTUNE = 5 V GHz/V -- 0.13 -- Supply Current I TOTAL (ICC + IBUFFER) ICC IBUFFER mA -- -- -- 185 165 20 205 175 30 Tune Voltage VTUNE V 1.0 -- 12.5 Tuning Current Leakage VTUNE = 13 V A -- 5 10 3. VCO can operate over the 4.75 V to 5.25 V supply voltage range. Absolute Maximum Ratings 4,5,6 2 Parameter Absolute Maximum Supply Voltage (VCC & VBUFFER) +5.5 Vdc VTUNE 0 to +15 Vdc Storage Temperature -55C to +150C Operating Temperature -40C to +85C Case Temperature (TC) (measured @ exposed pad) +100C Junction Temperature7 +135C 4. Exceeding any one or combination of these limits may cause permanent damage to this device. 5. MACOM does not recommend sustained operation near these survivability limits. 6. Operating at nominal conditions with TJ +135C will ensure MTBF > 2.5 x 106 hours. 7. Junction Temperature (TJ) = TC + jc * (V * I) Typical thermal resistance (jc) = 35 C/W. a) For TC = 25C, TJ = 57C @ 5 V, 185 mA b) For TC = 85C, TJ = 118C @ 5 V, 190 mA Handling Procedures Please observe the following precautions to avoid damage: Static Sensitivity Gallium Arsenide Integrated Circuits are sensitive to electrostatic discharge (ESD) and can be damaged by static electricity. Proper ESD control techniques should be used when handling these devices. ESD Rating: Class 1A M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macomtech.com for additional data sheets and product information. * North America Tel: 800.366.2266 / Fax: 978.366.2266 * Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 * Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 MAOC-011030 Voltage Controlled Oscillator 5.458 - 6.129 GHz Rev. V2 Typical Performance Curves: VCC = VBUFFER = 5V, TA = +25C (unless otherwise indicated) Output Power vs. Tuning Voltage - RF Port Output Power vs. Tuning Voltage - RF/2 Port 20 20 18 18 16 16 14 14 12 12 10 10 8 8 +25C -40C +85C 6 6 4 4 2 2 0 0 1 2 3 +25C -40C +85C 4 5 6 7 8 9 10 11 12 13 14 0 0 1 2 3 4 5 Tuning Voltage (V) Frequency Sensitivity vs. Tuning Voltage - RF Port 7 8 9 10 11 12 13 14 Frequency Sensitivity vs. Tuning Voltage - RF/2 Port 1.0 1.0 +25C -40C +85C 0.8 0.8 0.6 0.6 0.4 0.4 0.2 0.2 0.0 6 Tuning Voltage (V) 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 0.0 +25C -40C +85C 0 1 2 3 Tuning Voltage (V) 4 5 6 7 8 9 Single Side Band Phase Noise vs. Tuning Voltage RF Port Single Side Band Phase Noise vs. Frequency Offset RF Port (VTUNE = 5V) -60 0 10 KHz offset -70 -20 100 KHz offset -80 -40 -90 -60 -100 -80 -110 -100 -120 -120 -130 -140 -140 10 11 12 13 14 Tuning Voltage (V) 1 2 3 4 5 6 7 8 9 10 Tuning Voltage (V) 11 12 13 14 +25C -40C +85C -160 10 2 10 3 10 4 10 5 10 6 Frequency Offset (Hz) 3 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macomtech.com for additional data sheets and product information. * North America Tel: 800.366.2266 / Fax: 978.366.2266 * Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 * Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 10 7 MAOC-011030 Voltage Controlled Oscillator 5.458 - 6.129 GHz Sample Board Rev. V2 Parts List Component Value Case Size C1 100 pF 0402 C2, C3, C4 0.1 F 0402 C5 10 F Tantalum 1206 Lead-Free 5 mm 32-Lead PQFN YYWW OC1030 LLLLLL NOTES: 1. Reference JEDEC MO-220-VHHD-5 for additional dimensional and tolerance information. 2. All dimensions shown as in/mm. 3. Reference S2083 application note for PCB footprint information. Reference Application Note S2083 for lead-free solder reflow recommendations. Meets JEDEC moisture sensitivity level 3 requirements. Plating is 100% matte tin over copper. 4 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macomtech.com for additional data sheets and product information. * North America Tel: 800.366.2266 / Fax: 978.366.2266 * Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 * Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298