N SERIES MINI MODULE
Hypertronics Corporation Toll Free: 1-800-225-9228 Tel: 978-568-0451 Fax: 978-568-0680 www.hypertronics.com 4 / 19
HypertacÒmini-modular connectors employ a
do-it-yourself system based on the building block
principle. They offer a variety of combinations
available in a single connector frame. Therefore,
the user is capable of selecting the connector that
fulfills the exact requirements with off-the-shelf
components.
One of the many advantages of the HypertacÒ
contact is its low insertion and extraction forces.
In this application the user is able to assemble a
significantly large number of contacts into a
connector which is still able to mate and unmate
smoothly and easily
The N series can be built up for the following:
Rack and panel applications
-- Standard
-- With keying system
-- With locking systems
-- With floating mounting
Cable applications
-- Hooded with rounded or flat cable
security clamps
-- With jack screws
Programming applications
The system is composed of two basic elements:
the modules and the frames.
1. The modules are the connector elements of
the system. Two types of contacts are
available: signal and power. These contacts
are housed in small plastic blocks. All
contacts are removable for easy assembly
and repair. The width of each module block is
designated in units. Please see pages
N5--N7. The modules have 10 contacts @ 4
Amps (Type P & K), 5 contacts @ 9 Amps
(Type T), 4 coax @ 509s (Type V), and 45
contacts @ 1 Amp (Type H).
2. The frames hold the modules in position.
They range from a basic frame consisting of 2
side rails and 2 end caps to more complex
versions with jackscrews, hoods, cable
clamps, etc. All frames are available in
various lengths to conform to almost any
combination of modules. Although any
length is possible, we suggest ordering one
of the standard lengths for optimum delivery
and price. This can be accomplished by filling
in any empty spaces with blank modules.
With the N series, specially designed
connectors can be purchased quickly and
inexpensively, eliminating the extra cost and
delay of custom tooling.
2. The frames hold the modules in position.
They range from a basic frame consisting of 2
side rails and 2 end caps to more complex
versions with jackscrews, hoods, cable
clamps, etc. All frames are available in
various lengths to conform to almost any
combination of modules. Although any
length is possible, we suggest ordering one
of the standard lengths for optimum delivery
and price. This can be accomplished by filling
in any empty spaces with blank modules.
With the N series, specially designed
connectors can be purchased quickly and
inexpensively, eliminating the extra cost and
delay of custom tooling.
Hypertronics Catalog sec 4 5/1/06 3:17 PM Page 19
N SERIES MINI MODULE
Hypertronics Corporation Toll Free: 1-800-225-9228 Tel: 978-568-0451 Fax: 978-568-0680 www.hypertronics.com
4 / 20
Notes:
1) For empty block, order ZNH045--001
2) Male contacts are shrouded in the insulator, female mounts in the plug frame are suggested.
3) Crimp contacts will be shipped unassembled.
4) For ordering information regarding modules assembled in frames, see pg. 4/30.
5) Dimensions in inches (mm).
Width is 2 units 45 Crimp Contacts .016 (.40mm) contacts
Module H
Notes:
1) For empty block, order ZNK010--001.
2) Contacts will be shipped unassembled
3) For ordering information regarding modules
assembled in frames, see pg. 4/30.
4) Dimensions in inches (mm).
5) Crimping instructions Doc# S50063
GENERAL SPECIFICATIONS
Insulator
Contact
Current Rating
Contact Resistance
Extraction Force
Contact Life Cycles
Insulation Resistance
Temperature Rating
Material:
Plating
Reference
-- 5 5 Cto+105 C
4amps
< 5 milliohms
.5 -- 2 oz.
100,000
>105megohms @ 500 VDC
Breakdown voltage >1400V RMS
Brass
BeCu wires + brass body
NKFST
Plating: T, TH, TAH
Terminal Style: H2, R, RR & S
Contact Gender:
M = Male, F = Female
ORDERING INFORMATION
TERMINAL STYLE
Ref. H2
Double crimp 22 AWG wire
stripped back .146 (3.70)
YPN006--019 (pin)
YSK006--009 (socket)
Female
Male
Module K Width is 1 unit 10 Hypertac removable signal contacts .024” (.60mm) contacts
.573
(14.55)
1.180
(29.975)
.697
(17.70)
.857
(16.70)
Ref. R
Crimp 22 AWG wire
stripped back .173 (4.40)
YPN006--021 (pin)
YSK006--011 (socket)
Dimension A .035 (.90)
Dimension B .051 (1.30)
Ref. RR
Crimp 18--20 AWG wire
YPN006--158 (pin)
YSK006--089 (socket)
Dimension A .055 (1.39)
Dimension B .071 (1.80)
stripped back .173 (4.40)
Ref. S
Solder cup 22 AWG
YPN006--020 (pin)
YSK006--010 (socket)
Glass filled Nylon
Crimp tool: AFM8
Positioner: K547
Extraction tool: S
/
DEM1.0060
Accessories
(pin)
(socket)
File no. LR83002--4
Dielectric
Withstanding Voltage: >1050V RMS
.035
(.900)
Hole
.039
(1.00)
Hole
.736
(16.70)
B
A
.100
(2.54)
.071
(1.80)
.055
(1.40)
CAGE
50541
GENERAL SPECIFICATIONS
Insulator
Contact
CurrentRating
Contact Resistance
Extraction Force
Contact Life Cycles
Insulation Resistance
Temperature Rating
Material:
Plating
Reference
--55 C to + 125 C
1 amp
<8 milliohms
.3 -- 1.6 oz.
100,000
>103megohms @ 500 VDC
Breakdown voltage >750V RMS
PhBz
BeCu wires + brass body
Nylon,25%Glass
(pin)
(socket)
Dielectric
Withstanding Voltage >500V RMS
T=10in gold (min) over Ni
TH = 50 in gold (min) over Ni
TAH = 50 in gold (min) over Ni
on mating surface, gold
flash over Ni on
termination
Crimp tool: AFM8 or M22520/2--01
Positioner: Socket =T1974
Pin = T1973
Insertion tool: T1970
Accessories
NHFRTAH
Plating: T, TH, TAH
Contact Gender:
M = Male, F = Female
ORDERING INFORMATION
Termination Style: R
1.180
(29.98)
.431
(10.95)
.177
(4.49)
.177
(4.49)
.065
(1.65)
Typ.
.065
(1.65)
Typ.
Female
Male
.199
(5.06)
.909
(23.10)
Male Pin: YPN004--010H
Crimp: 26-28AWG
Female Socket: YSK004--020AH
Wire Strip Length: 26-28 AWG
Replacement
Contacts:
T=10in gold (min) over Ni
TH = 50 in gold (min) over Ni
TAH = 50 in gold (min) over Ni
on mating surface, gold
flash over Ni on
termination
.184
(4.68)
Hypertronics Catalog sec 4 5/1/06 3:17 PM Page 20
N SERIES MINI MODULE
Hypertronics Corporation Toll Free: 1-800-225-9228 Tel: 978-568-0451 Fax: 978-568-0680 www.hypertronics.com 4 / 21
Crimp tool: AFM8
Positioner: K623
Extraction tool:S/DEM1.0060
NPFST
Plating: T, TH, TAH
Terminal Style: D, R, S & Y
Contact Gender:
M=Male,F=Female
ORDERING INFORMATION
Notes:
1) For empty block, order ZNP010--001
2) Crimp contacts will be shipped unassembled
3) For ordering information regarding modules assembled
in frames, see pg. 4/30.
4) Dimensions in inches (mm)
5) Crimping instructions Doc# S50063
GENERAL SPECIFICATIONS
Insulator
Contact
Current Rating
Contact Resistance
Extraction Force
Contact Life Cycles
Insulation Resistance
Temperature Rating
Material:
Plating
Reference
-- 5 5 C to + 105 C
Glass filled Nylon
4amps
< 5 milliohms
.5 -- 2 oz.
100,000
>103Megohms @ 500 VDC
Breakdown voltage >1400V RMS
Brass
BeCu wires + brass body
Female
Male
Width is 1 unit 10 Hypertac removable signal contacts .024” (.60mm) contacts
Module P TERMINAL STYLE
.181
(4.60)
.100
(2.54)
1.181
(30.00)
.433
(11.00)
.100
(2.54)
.141
(3.57)
.181
(4.60)
.201
(5.10)
.992
(25.20)
Ref. D
Straight solder dip
YPN006--047H (pin)
YSK006--032AH (socket)
Ref. FD
Front removable D
YPN006--493H (pin)
YSK006--264AH (socket)
Ref. R
Crimp 22, 24 & 26 AWG
stripped back .173 (44)
YPN006--025H (pin)
YSK006--015AH (socket)
Ref. S
Soldercupupto22AWG
YPN006--026H (pin)
YSK006--016AH (socket)
stripped back
Ref. Y
Wire wrap
YPN006--046H (pin)
YSK006--031AH (socket)
Accessories
(pin)
(socket)
File no. E102195
File no. LR83002--4
T=10in gold (min) over Ni
TH = 50 in gold (min) over Ni
TAH = 50 in gold (min) over Ni
on mating surface, gold
flash over Ni on
termination
Dielectric Withstanding
Voltage: 1050 VRMS
1)
2)
3)
Notes:
For empty block, order ZNT005--001.
Crimp contacts will be shipped unassembled.
For ordering information regarding modules assembled in frames, see pg. 4/30.
Dimensions in inches (mm).
GENERAL SPECIFICATIONS
Insulator
Contact
Current Rating
Contact Resistance
Extraction Force
Contact Life Cycles
Insulation Resistance
Temperature Rating
Material:
Plating
Reference
-- 5 5 C to + 105 C
9amps
< 2.5 milliohms
.7 -- 5 oz.
100,000
>105megohms @ 500 VDC
Breakdown voltage >2000V RMS
NTFST
Terminal Style: R, S & V
Contact Gender:
M=Male,F=Female
ORDERING INFORMATION
TERMINAL STYLE
Module T Width is 2 units 5 Hypertac removable contacts .059 (1.50) contacts
Ref. R
Crimp 14, 16, 18 & 20 AWG
wire stripped back .285 (7.20)
YPN015--016H (pin)
YSK015--025AH (socket)
Crimp tool: AF8
Positioner: TP687
Extraction tool:S/DEM5.0150
Ref. S
Solder cup
up to 13 AWG
YPN015--017H (pin)
YSK015--026AH (socket)
Glass filled Nylon
.433(11.00)
.200
(5.08)
.059(1.5)
1.181
(30.00) .200
(5.08)
.256
(6.5)
.285
(7.25)
.185
(4.70)
.551
(14.00)
.047
(1.20)
1.362
(34.60)
square
Ref. V
Wire wrap
YPN015--018H (pin)
YSK015--027AH (socket)
4)
Female
Male
(pin)
(socket)
File no. E102195
File no. LR83002--4
Dielectric
Withstanding Voltage: 1500
.024
(.60)
.185
(4.70)
.051
(1.30)
.035
(.90)
.024
(.60)
.024
(.60) square
.039
(1.00)
.057
(1.45)
.108
(2.75
.108
(2.75
.075
(1.90)
.075
(1.90)
Brass
BeCu wires + brass body
.191
(4.84)
T=10in gold (min) over Ni
TH = 50 in gold (min) over Ni
TAH = 50 in gold (min) over Ni
on mating surface, gold
flash over Ni on
termination
Plating: T, TH, TAH
Hypertronics Catalog sec 4 5/1/06 3:17 PM Page 21
N SERIES MINI MODULE
Hypertronics Corporation Toll Free: 1-800-225-9228 Tel: 978-568-0451 Fax: 978-568-0680 www.hypertronics.com
4 / 22
Notes:
1) For ordering information regarding modules assembled in frames, see pg. 4/30
2) Dimensions in inches (mm)
ORDERING INFORMATION
Width: 1.5 Units Contacts: 4 Hypertac Contacts (on both signal & ground)
Gender Termination Part Number
Female
NVFRTAH*
Crimp Coaxial
for RG316
Module V
Coax
YCX0315--002AH
Female
Replacement Contacts
Solder Coaxial
for RG405 or
T--Flex 405
NVFSTAH* YCX0315--001AH
Male
Crimp Coaxial
for RG316 NVMRTH* YCX0315--004H
.441
(11.20)
Male
Solder Coaxial
for RG405 or
T--Flex 405
NVMSTH* YCX0315--003H
File No.: UL E102195
NVFR1TAH
Crimp Coaxial
for RG316DB YCX0315--019AH
Crimp Coaxial
for RG316DB NVMR1TAH YCX0315--018H
.200
(5.10)
.129
(3.27)
.290
(7.38)
.290
(7.38)
.250
(6.35)
.020
(.51) .100
(2.54)
1.181
(30.00)
.433
(11.00)
.250
(6.35)
.024
(.061)
Female Straight Dip
Coax
NVFDTAH Fixed Contacts
cannot be
removed
.100
(2.54)
.181
(4.60)
.024
(.060)
Extraction
Force
*Plating Reference
Male Pins: H=50 in gold (min)
over Ni
Female Sockets: AH = 50 in gold (min)
over Ni on mating
surface, gold flash
over Ni on termination
®
2.5
MALE CRIMP
Ref. R & R1
(Crimp)
.129
(3.27)
.512
(13.00)
.290
(7.38)
.290
(7.38)
*
*
*
.512
(13.00)
Hypertronics Catalog sec 4 5/1/06 3:17 PM Page 22
N SERIES MINI MODULE
Hypertronics Corporation Toll Free: 1-800-225-9228 Tel: 978-568-0451 Fax: 978-568-0680 www.hypertronics.com 4 / 23
Notes:
1) For ordering information regarding modules assembled in frames, see pg. 4/30.
2) Dimensions in inches (mm)
General Specifications
COAXTAC
Nominal Impedance 50 ohms
Frequency Range DC 3 GHz with RG316
DC 18GHz with RG405
Temperature Rating --55 Cto125C
reppoC,muillyreB,ssarBslairetaM
PTFE Fluorocarbon
Finishes
Center Contacts and Gold over nickel
reppocrevosgnisuoH
lekcinrevodloGeriW
Electrical (Based on RG--405 Semi Rigid Cable)
Voltage Standing Wave Ratio (DC to 3GHz) 1.20:1 max.
(3GHz to 18GHz) 1.50:1 max.
RF Transmission Loss 0.50 dB @ 18 GHz
Insulation Resistance 5,000 megohms min.
Dielectric Withstanding Voltage 500 VRMS
Contact Resistance
Inner Contact 8 miliohms max.
Outer Contact 2 milliohms max.
Mechanical
Extraction force 1.5 -- 6.0 oz max., 3 oz. average
Connector Durability Greater than 25,000 cycles
For Inner Conductor Crimping
Crimp tool: AFM8
Positioner: T1957
For Outer Conductor Crimping
Crimp tool: HX3
Die Set: T1958 for RG316
T2019 for RG316DB
Contact Removal Tool: T1982
ACCESSORIES
Cabling Instructions
Crimp (R) & (R1) Solder (S)
Cable RG316 & RG405 T--Flex 405
RG316DB
Socket S50302 S50301 S50307
Pin S50304 S50303 S50308
Please request specs from our Customer Service Department
File No.: UL E102195
TM
Current Rating 25 amps (Free Air) 17 Amps
(Bundled)
Contact Resistance
(milliohms) <1.5 milliohms
Extraction Force 3.0 -- 17.0 oz.
Contact Life Cycles >100,000
Breakdown voltage >1600 VRMS
Dielectric
Withstanding Voltage 1200 VRMS
Insulation Resistance >104megohms @ 500VDC
Temperature Rating --55 deg. C to + 105 deg. C
Insulator Nylon
Contact material: BeCu wires + brass
Approx. Weight: M: .32 oz. (9.15g), F: .34 oz. (9.50g)
GENERAL SPECIFICATIONS
Hypertronics Catalog sec 4 5/1/06 3:17 PM Page 23
N SERIES MINI MODULE
Hypertronics Corporation Toll Free: 1-800-225-9228 Tel: 978-568-0451 Fax: 978-568-0680 www.hypertronics.com
4 / 24
ORDERING INFORMATION
Width: 2.5 Units Can be mounted by itself or in a frame
Contacts: 4 Hypertac®Contacts
Gender Termination Part Number
HAT1PFVNelameF
Male
Empty
Block
Module V
25 Amp Power
YSK025--031AH*
Replacement Contacts
LVFH
Current Rating 25 amps (Free Air) 17 Amps
(Bundled)
Contact Resistance
(milliohms) <1.5 milliohms
Extraction Force 3.0 -- 17.0 oz.
Contact Life Cycles >100,000
Breakdown voltage >1600 VRMS
Dielectric
Withstanding Voltage 1200 VRMS
Insulation Resistance >104megohms @ 500VDC
Temperature Rating --55 deg. C to + 105 deg. C
Insulator Nylon
Contact material: BeCu wires + brass
Approx. Weight: M: .32 oz. (9.15g), F: .34 oz. (9.50g)
GENERAL SPECIFICATIONS
Current Rating
Contact Resistance
Extraction Force
Plating
Reference
Male Pins: H= 50 in gold (min) over Ni
AH= 50 in gold (min) over Ni
Female Sockets:
on mating surface, gold flash
over Ni on termination
Crimp tool: M309
Extraction Tool: T1982
Positioner: T1981
ACCESSORIES
.512
(13.00)
Female
Empty
Block
Male
Crimp
25 Amp (Free Air)
(17 Amps
Bundled)
12--14 AWG
NVMP1TH* YPN025--24H
Crimp
25 Amp (FreeAir)
(17 Amps
Bundled)
12--14 AWG
Notes:
1) For ordering information regarding modules assembled in frames, see pg. 4/30
2) Dimensions in inches (mm)
3) Contact shipped unassembled
File No.: UL E102195
.750
(19.05)
.1.181
(30.00)
.250
(6.35)
.250
(6.25)
.750
(19.05)
.512
(13.00)
.294
(7.48)
.512
(13.00)
.124
(3.15)
.250
(6.35)
1.181
(30.00)
.250
(6.25) NVFH
024H
(
Bundled
)
NVFH
NVMH
*
*
*Plating
Reference
Hypertronics Catalog sec 4 5/1/06 3:17 PM Page 24
N SERIES MINI MODULE
Hypertronics Corporation Toll Free: 1-800-225-9228 Tel: 978-568-0451 Fax: 978-568-0680 www.hypertronics.com 4 / 25
NEB7
Frame Size: 7, 11, 15, 19, 23, 27, 31 & 35 units
P = Plug, E = Receptacle
ORDERING INFORMATION
FRAME B
Single row, rack and panel with keying
Built-in pin protection
36 possible keying arrangements
Standard sizes: 7, 11, 15, 19, 23, 27, 31 & 35 unit lengths
Up to 350 contacts on .100 (2.54) X .100 (2.54) centers
Plug
Receptacle
SEQUENCE OF MODULES
FRAME BV
Jackscrew extractor
36 possible keying options
Accepts 22--28 AWG wires
Single row, rack & panel with keys
Standard sizes: 7, 11, 15, 19, 23,
27, 31 & 35 unit lengths.
Notes:
1) See mounting dimensions, pg. N15
2) See ordering information , pg. N16 for
complete connectors
3) Standard length for p.c. boards
4) Dimensions in inches (mm)
NEBV7 Frame Size: 7, 11, 15, 19,
23, 27, 31 & 35 units
P = Plug, E = Receptacle
ORDERING INFORMATION
Plug
Receptacle
X
3.043
(77.30)
.709
(18.00)
.800
(20.32)
.185
(4.70)
.185
(4.70)
1.181
(30.00)
.181(4.60) .433
(11.00)
0.394
(10.00)
X
1.402
(35.60)
1.181
(30.00)
X
up to 720 contacts
up to 775 contacts
SEQUENCE OF MODULES
M4.00
.787
(20.00)
.217 (5.50)
.375 (9.50)
3
4
.217 (5.50)
.375 (9.50)
3
4
File no. LR83002--4
File no. LR83002--4
Up to 320 contacts on .100
(2.54) x .100 (2.54) centers
Built-in pin protection
Allow 3 units for jackscrew
.709
(18.00)
1.181
(30.00)
.369
(9.38) Plus X
1.402
(35.60)
.800
(20.32)
.433
(11.00)
1.181
(30.00)
.369
(9.38) Plus X
1.402
(35.60)
.800
(20.32)
.300 (7.62)
SEQUENCE OF MODULES
Receptacle
X
.800
(20.32)
.433
(11.00)
3.043
(77.30)
.709
(18.00)
.800
(20 32
1.181
(30.00)
X
SEQUENCE OF MODULES
M4.00
.787
(20.00)
Æ
.217 (5.50)
.375 (9.50)
3
4
3002--4
0
s
.369
(9.38) Plus X
1.402
(35.60)
.800
(20.32)
Plug
Notes:
1) See mounting dimensions, pg. N15
2) See ordering information , pg. N16 for
complete connectors
3) Standard length for p.c. boards
4) Dimensions in inches (mm)
.217 (5.5
.375 (9.5
Plug
SEQUENCE OF MODULES
LR83002--4
.709
(18.00)
1.181
(30.00)
.369
(9.38) Plus X
1.402
(35.60)
dimensions, pg. N15
formation , pg. N16 for
ectors
h for p.c. boards
nches (mm)
Receptacle
.800
(20.32)
.185
(4.70)
.185
(4.70)
1.181
(30.00)
.181(4.60) .433
(11.00)
0.394
(10.00)
X
1.402
(35.60)
SEQUENCE OF MODULES
.217 (5.50)
.375 (9.50)
3
4
.300 (7.62)
Notes:
1) See mounting dimensions, see pg 4/29
2) See ordering information, see pg 4/30 complete connectors
3) Standard length for p.c. boards
4) For thicker chassis, specify longer studs with modification 470
5) Dimensions in inches (mm)
Hypertronics Catalog sec 4 5/1/06 3:17 PM Page 25
N SERIES MINI MODULE
Hypertronics Corporation Toll Free: 1-800-225-9228 Tel: 978-568-0451 Fax: 978-568-0680 www.hypertronics.com
4 / 26
NEBY7
Frame Size: 7, 11, 15, 19, 23, 27, 31, 35 units
P = Plug, E = Receptacle
ORDERING INFORMATION
FRAME BY
H1/2 turn quick disconnect
HSingle row, rack and panel
HBuilt-in pin protection
HStandard sizes: 7, 11, 15, 19, 23, 27, 31, 35 unit lengths
HUp to 400 contacts on .100 (2.54) x .100 (2.54) centers
H180°quick turn jack provides >15,000 mating cycles
HCrimp, solder cup, dip solder, and wire wrapâterminations
HWiping action pin and sockets
H<1 second mating/unmating operation
HProvides 20--400 contacts in a single mating
H5 or 9 ampere contacts mixed to your needs
HBuilt-in pin protection
HGreat for test equipment, burn-in stands, security systems,
medical equipment, etc.
HAllow 5 units for jack screw
up to 400 contacts
Notes:
1) See mounting dimensions, pg. N15
2) See ordering information, pg. N16 for complete connectors
3) Dimensions in inches (mm)
H
180
°
quick turn jack provides >15,000 mating cycles
H
Great for test equipment, burn-in stands, security
systems, medical equipment, etc.
H
<1 second mating/unmating operation
H
Crimp, solder cup, dip solder, and wire wrap
R
terminations
H
Wiping action pin and sockets
H
Provides 20--400 contacts in a single mating
H
4 or 9 ampere contact mixed to your needs
H
Built-in pin protection
H
Standard Frame sizes: 11, 15, 19, 23, 27, 31, 35 & 45
unit len
g
ths
1.800
(45.72) 2.200
(55.88) 2.600
(66.04) 3.000
(76.20) 3.400
(86.36)
2.393
(60.80) 2.794
(70.96) 3.194
(81.12) 3.594
(91.28) 4.000
(101.44)
3.800
(96.52)
4.393
(111.60)
11 15 19 23 27 31 35
1.400
(35.56)
X
Units
Y
Z
.884
(22.47) 1.084
(27.55) 1.284
(32.63) 1.484
(37.71) 1.684
(42.79) 1.884)
(47.87) 2.084
(52.95)
1.993
(50.64)
4.800
(121.92)
5.400
(137.16)
45
2.500
(63.50)
P = Plug (mates with receptacle type NEBY)
Notes:
1) See mounting dimensions, pg. N15
2) See ordering information, pg. N16 for complete connectors
3) Dimensions in inches (mm)
pg 4/30
pg 4/29.
FRAME BY up to 900 contacts
.709
(18.00)
Hypertronics Catalog sec 4 5/1/06 3:17 PM Page 26
N SERIES MINI MODULE
Hypertronics Corporation Toll Free: 1-800-225-9228 Tel: 978-568-0451 Fax: 978-568-0680 www.hypertronics.com 4 / 27
Notes:
1) See ordering information, pg. N16 for complete connectors
2) Dimensions in inches (mm)
1.181
(30.00)
SEQUENCE OF MODULES
.500(12.7)
Z
H
180
°
quick turn jack provides >15,000 mating cycles
H
Great for test equipment, burn-in stands, security
systems, medical equipment, etc.
H
<1 second mating/unmating operation
H
Crimp, solder cup, dip solder, and wire wrap
R
terminations
H
Wiping action pin and sockets
H
Provides 20--400 contacts in a single mating
H
4 or 9 ampere contact mixed to your needs
H
Built-in pin protection
H
Standard Frame sizes: 11, 15, 19, 23, 27, 31, 35 & 45
unit lengths
H
Adjustable Cable Clamp: .452 to 1.260 in (11.5 to
32.0 mm)
FRAME JY up to 400 contacts File no. LR83002--4
Ò
2.398
(60.90)
.551
(14.00)
2.657
(67.50)
NPJY
Y
TYPE JY FRAME
3
Cable OD
17.5mm to
25.4mm
3.875
(98.42)3.052
(77.52)
.709
(18.00)
1.800
(45.72) 2.200
(55.88) 2.600
(66.04) 3.000
(76.20) 3.400
(86.36)
2.393
(60.80) 2.794
(70.96) 3.194
(81.12) 3.594
(91.28) 4.000
(101.44)
3.800
(96.52)
4.393
(111.60)
11 15 19 23 27 31 35
1.400
(35.56)
X
Units
Y
Z
.884
(22.47) 1.084
(27.55) 1.284
(32.63) 1.484
(37.71) 1.684
(42.79) 1.884)
(47.87) 2.084
(52.95)
1.993
(50.64)
4.800
(121.92)
5.400
(137.16)
45
2.500
(63.50)
Notes:
1) See ordering information, pg. N16 for complete connectors
2) Dimensions in inches (mm)
SEQUENCE OF MODULES
P = Plug (mates with receptacle type NEBY)
4/30
FRAME JY up to 900 contacts
Hypertronics Catalog sec 4 5/1/06 3:17 PM Page 27
N SERIES MINI MODULE
Hypertronics Corporation Toll Free: 1-800-225-9228 Tel: 978-568-0451 Fax: 978-568-0680 www.hypertronics.com
4 / 28
NEH7
Frame Size: 7, 11, 15, 19, 23, 27, 31 & 35 units
P = Plug, E = Receptacle
ORDERING INFORMATION
FRAME H
HFloat mounting with heavy duty guides
HMax. radial play .049 (1.25)
HSingle row, rack and panel with keying
HBuilt-in pin protection
H36 possible keying combinations
HStandard sizes: 7, 11, 15, 19, 23, 27, 31 & 35 unit lengths
HUp to 350 contacts on .100 (2.54) x .100 (2.54) centers
up to 350 contacts
Plug
Receptacle
.413
(10.50)
.791
(20.10)
.728
(18.50) .157
(4.00)
Æ
X
M2.5
.154
(3.90)
.476
(12.10)
1.185
(30.10)
1.402
(35.60)
1.244
(31.50)
.315
(8.00)
.602
(15.30)
1.402
(35.60)
1.244
(31.50)
.315
(8.00)
.685
(17.40)
.154
(3.90)
M2.5
.697
(17.70)
.563
(14.3)
.181
(4.60)
SEQUENCE OF MODULES
.165
(4.20)
Æ
X
File no. E102195 File no. LR83002--4
ÒÒ
4
Notes:
1) See mounting dimensions, pg. N15
2) See ordering information, pg. N16 for complete connectors
3) Dimensions in inches (mm).
FRAME JV
HHooded with cable clamp
HJackscrew extractor
HJackscrew uses 3 units
HSingle row, rack and panel with keying
HBuilt-in pin protection
H36 possible keying combinations
HStandard sizes: 11, 15, 19, 23, 27, 31 & 35 unit lengths
HAdjustable cable clamp will hold 80 to 320 conductors of
22 to 28 AWG. Adjusts .452 to 1.260 in (11.5 to 32.0 min)
HNPJV mates with receptacle type NEBV or NEPJV
HUp to 320 contacts on .100 (2.54) x .100 (2.54) centers
Notes:
1) See ordering information , pg. N16 for complete connectors
2) Dimensions in inches (mm)
3) Mating face cover: YHD0364--XX (size)
NPJV11 Frame Size: 11, 15, 19, 23, 27, 31 & 35
units (Allow 3 units for jackscrew)
P = Plug (mates with receptacle type NEBV or NEPJV)
ORDERING INFORMATION
plug with up to 320 contacts
3.433
(87.20)
2.398
(60.90)
.709
(18.00)
.551
(14.00)
2.657
(67.50)
3.988
(101.30)
1.181
(30.00)
Z
Y
.787
(20.00)
SEQUENCE OF MODULES
Plug M4.00
Æ
File no. LR83002--4
Ò
1.993
(50.64) 2.393
(60.80) 2.794
(70.96) 3.194
(81.12) 3.594
(91.28) 4.000
(101.44) 4.393
(111.60)
11 15 19 23 27 31 35
Units
Y
Z.884
(22.47) 1.084
(27.55) 1.284
(32.63) 1.484
(37.71) 1.684
(42.79) 1.884)
(47.87) 2.084
(52.95)
Notes:
1) See ordering information, (see pg 4/30)
2) Dimensions in inches (mm)
3) mating face cover: YHD0369-XX (size)
Notes:
1) See mounting dimensions, pg. N15
2) See ordering information, pg. N16 for complete connectors
3) Dimensions in inches (mm).
P = Plug (mates with receptacle type NEBV or NEPJV )
pg 4/29.
pg 4/30 for complete connectors
FRAME H up to 775 contacts
FRAME JV plug with up to 775 contacts
Hypertronics Catalog sec 4 5/1/06 3:17 PM Page 28
N SERIES MINI MODULE
Hypertronics Corporation Toll Free: 1-800-225-9228 Tel: 978-568-0451 Fax: 978-568-0680 www.hypertronics.com 4 / 29
For Single Row Frame
MOUNTING DIMENSIONS
FRAMES: B, BV, BY, JV & JY
.191
(4.85)
1.181
(30.00)
.800
(20.32)
.094
(2.40)
X
.094
(2.40)
.020 (0.5)
Max. Radius
Typ. 4 Places
Æ.106
(2.70) 4 Holes
Plug
Receptacle
1.240
(31.50) .220
(5.59)
X
FRAME H
Float Mounting
Y
.319
(8.10)
.094
(2.40)
.094
(2.40)
1.28
(32.50)
.642
(16.30)
1.28
(32.50)
.319
(8.10)
.154
(3.90) Typ.
Y
.146
(3.70)
R.177
(4.50)
.415
(10.53)
.240
(6.10)
.799
(20.30)
.079
(2.00)
Typ.
Typ.
Max. radial play = .049 (1.25)
11
15
19
23
27
31
1.400
(35.56)
1.800
(45.72)
2.200
(55.88)
2.600
(66.04)
3.000
(76.20)
3.400
(86.36)
2.400
(60.96)
2.800
(71.12)
3.200
(81.28)
3.600
(91.44)
4.000
(101.60)
4.400
(111.76)
XY
71.000
(25.40)
2.000
(50.80)
35 3.800
(96.52)
4.800
(121.92)
Frame
Units
MOUNTING DIMENSIONS
.118 (3.0)
Max. Radius
Typ. 4 Places
Æ.165
(4.20) Typ.
Æ.165
(4.20) Typ.
.118 (3.0)
Max. Radius
Typ. 4 Places
.
094
(2.40) Typ.
.642
(16.30)
45 4.800
(121.92)
5.800
(147.32)
Notes:
1) 59 oz.Din. (4.2 kgDcm) torque for mounting
2) Refer to individual frame type for standard length
3) Dimensions in inches (mm)
Hypertronics Catalog sec 4 5/1/06 3:17 PM Page 29
N SERIES MINI MODULE
Hypertronics Corporation Toll Free: 1-800-225-9228 Tel: 978-568-0451 Fax: 978-568-0680 www.hypertronics.com
4 / 30
ORDERING INFORMATION
NPBV19/1TMS /1PH/10PMS/1PH/1TMS/T
Plating:
T=10
min gold (min) over Ni
TH=50
min gold (min) over Ni
TAH=50
min gold (min) over N
on mating surface, gold
flash over Ni on
termination.
P=Plug
E = Receptacle
Length of Frame
in units. Add 3 units
when ordering frames
with jackscrews
(BV&JV)
Add 5 units when
ordering frames with
1/2 turn (BY, JY)4
Number of Modules
Frame type:
B, BV, BY,
G, H, JV, JY,
&PJV
Module combination by quantity (Refer to
catalog page N4 -- N6 for type of module
and terminals style etc. using above outline
as sample. The beginning “N” and trailing
“T” from the modules are dropped because
they are in the assembly number instead).
Modules will be positioned in the frame
according to sequenced listed.
The N series connectors are engineered for quick and easy use. Standard housings will be shipped
completely assembled with the modules you select mounted.
The length of the frame is computed by multiplying the module units by the module quantity and totaling the results.
Module combination by quantity (Refer to
module section using the above outline as an
example. The beginning “N” and trailing “T” from
the modules are dropped because they are in
the assembly number instead).
=
=
=
Notes:
1) When part number exceeds 24 characters, please consult factory for special (abbreviated) part number.
2) The plug frame has a built in pin shroud (sockets may be used in plug frames, but not recommended).
3) See receptacle for sequence of modules.
4) Consult factory when ordering straight dip solder tails with jacking versions. Special cut out and modification --872 is required.
Hypertronics Catalog sec 4 5/1/06 3:17 PM Page 30