FX30B Series ITS-P-13022H Board to Board Power Connectors Up to 10 Amps / line with Misalignment Absorbing Structure Features 1. Bd to Bd power connectors optimized for multiple connectors on board: 10 A / line 2. Unique contact structure absorbs misalignment up to 0.3 mm in XY directions and + 1 mm in Z direction. 3. High contact reliability with independent 4-point contact 4. Excellent mating alignment with wide guide range 5. Wide varieties with 2 to 5 pos. Coplanar, Vertical and Parallel (Height = 20, 25, 30 Y mm) connections 6. Will be UL, TUV certified 7. RoHS Compliant Misalignment Absorbing Range X direction: 0.3mm Y direction: 0.3mm Z direction: +1mm Z X Variations [Coplanar] [Vertical A] [Parallel] Angled Header FX30B-*P-3.81DS X Angled Receptacle FX30B-*S-3.81DS Straight Header FX30B-*P-3.81DSAxx X Straight Receptacle FX30B-*S-3.81DSA [Vertical B] Straight Header FX30B-*P-3.81DSAxx X Angled Receptacle FX30B-*S-3.81DS Angled Header FX30B-*P-3.81DS X Straight Receptacle FX30B-*S-3.81DSA Pos. 2 pos. 3 pos. 4 pos. 5 pos. Width 20.56 24.37 28.18 31.99 Result of Temperature Rising Test: Coplanar connection Measured at the contact area near the center of the connector in current carrying condition Temperature Rising Curve : Basic Curve: 5 pos. 5 : Derating Curve: 5 pos. 5 : Basic Curve: 4 pos. 4 : Derating Curve: 4 pos. 4 : Basic Curve: 3 pos. 3 : Derating Curve: 3 pos. 3 : Basic Curve: 2 pos. 2 2 : Derating Curve: 2 pos. Rated current 10 A 0 10 20 30 40 50 60 Ambient Temperature [] 70 80 90 100 110 Current [A] Current [A] Derating Curve 32.0 30.0 28.0 26.0 24.0 22.0 20.0 18.0 16.0 14.0 12.0 10.0 8.0 6.0 4.0 2.0 0.0 32.0 30.0 28.0 26.0 24.0 22.0 20.0 18.0 16.0 14.0 12.0 10.0 8.0 6.0 4.0 2.0 0.0 5 : 5 Pos. :4 4 Pos. Rated current 10 A 0 10 20 30 40 50 60 70 80 90 3 : 3 Pos. : 2 2 Pos. 100 110 Ambient Temperature [] Note1: Maximum temperature is 105 C. Note2: Derating curve is determined by multiplying the reduction factor of 0.8 in respect to the value of current in the basic curve. Specifications herein are subject to change without notice. Contact Hirose for latest specifications, drawings or availabilities. Issued: Oct. 04, 2013