INTEGRATED CIRCUITS 74F06, 74F06A, 74F07, 74F07A Inverter/buffer drivers Product specification IC15 Data Handbook 1992 Jul 24 Philips Semiconductors Product specification 74F06, 74F06A, 74F07, 74F07A Hex inverter/buffer drivers (open-collector) FEATURES OF 74F06, 74F07 * Open Collector output drive 64mA * High speed * 12V output termination voltage * Symmetrical propagation delays TYPE TYPICAL PROPAGATION DELAY TYPICAL SUPPLY CURRENT (TOTAL) 74F06 3.5ns 30mA 74F06A 9.0ns 30mA 74F07 4.5ns 32mA FEATURES OF 74F06A, 74F07A 74F07A 10.0ns 32mA * Open Collector output drive 48mA * High speed * 30V output termination voltage * Replaces 74F06 and 74F07 * Improved performance upgrade for 74F06 and 74F07 * Reduced IOH leakage @ 30V ORDERING INFORMATION COMMERCIAL RANGE VCC = 5V 10%, Tamb = 0C to +70C DESCRIPTION PKG DWG # 14-pin plastic Dual In-line Package N74F06N, N74F06AN SOT27-1 14-pin plastic Small Outline N74F07D, N74F07AD SOT108-1 PIN CONFIGURATIONS 74F07/74F07A 74F06/74F06A A0 1 14 VCC A0 1 14 VCC 2 13 A5 Y0 2 13 A5 Y0 A1 3 12 Y5 A1 3 12 Y5 4 11 A4 Y1 4 11 A4 Y1 A2 5 10 Y4 A2 5 10 Y4 6 9 A3 7 8 Y3 Y2 6 9 A3 Y2 GND 7 8 Y3 GND SF00016 SF00017 LOGIC SYMBOLS 74F06/74F06A 1 3 5 9 74F07/74F07A 11 13 1 5 9 11 13 A0 A1 A2 A3 A4 A5 A0 A1 A2 Y0 Y1 Y2 Y3 Y4 Y5 Y0 Y1 Y2 Y3 Y4 Y5 2 4 6 8 10 12 2 VCC = Pin 14 GND = Pin 7 4 6 A3 A4 A5 8 10 12 VCC = Pin 14 GND = Pin 7 SF00018 July 24, 1992 3 SF00019 2 853-1122 07270 Philips Semiconductors Product specification 74F06, 74F06A, 74F07, 74F07A Hex inverter/buffer drivers (open-collector) IEC/IEEE SYMBOLS 74F07/74F07A 74F06/74F06A 1 2 3 4 5 6 9 8 11 10 13 12 1 2 3 4 5 6 9 8 11 10 13 12 SF00020 SF00021 LOGIC DIAGRAMS 74F06/74F06A A0 A1 A2 A3 A4 VCC = Pin 14 GND = Pin 7 A5 1 2 3 4 5 6 9 8 11 10 13 12 74F07/74F07A Y0 A0 Y1 A1 A2 Y2 Y3 A3 Y4 A4 VCC = Pin 14 GND = Pin 7 Y5 A5 1 2 3 4 5 6 9 8 11 10 13 12 SF00022 Y0 Y1 Y2 Y3 Y4 Y5 SF00023 INPUT AND OUTPUT LOADING AND FAN OUT TABLE PINS DESCRIPTION 74F (U.L.) HIGH/LOW LOAD VALUE HIGH/LOW An Data inputs ('F06, 'F07) 1.0/1.0 20A/0.6mA An Data inputs ('F06A, 'F07A) 1.0/0.7 20A/0.4mA Yn Data outputs ('F06) OC/106.7 OC/64mA Yn Data outputs ('F06A) OC/80 OC/48mA Yn Data outputs ('F07) OC/106.7 OC/64mA Yn Data outputs ('F07A) OC/80 OC/48mA NOTES: 1. One (1.0) FAST unit load is defined as: 20A in the High state and 0.6mA in the Low state. 2. OC = Open Collector FUNCTION TABLE INPUTS An OUTPUTS 'F06, 'F06A 'F07, 'F07A Yn Yn L H L H L H NOTES: 1. H = High voltage level 2. L = Low voltage level July 24, 1992 3 Philips Semiconductors Product specification 74F06, 74F06A, 74F07, 74F07A Hex inverter/buffer drivers (open-collector) ABSOLUTE MAXIMUM RATINGS (Operation beyond the limit set forth in this table may impair the useful life of the device. Unless otherwise noted these limits are over the operating free air temperature range.) RATING UNIT VCC Supply voltage PARAMETER -0.5 to +7.0 V VIN Input voltage -0.5 to +7.0 V IIN Input current -30 to +5 mA 'F06, 'F07 -0.5 to 12 V 'F06A, 'F07A -0.5 to 30 V 128 mA SYMBOL VOUT Voltage applied to output in High output state IOUT Current applied to output in Low output state Tamb Operating free air temperature range Tstg Storage temperature range 'F06, 'F07 'F06A, 'F07A 96 mA 0 to +70 C -65 to +150 C RECOMMENDED OPERATING CONDITIONS PARAMETER SYMBOL LIMITS MIN NOM MAX 5.0 5.5 VCC Supply voltage 4.5 VIH High-level input voltage 2.0 VIL Low-level input voltage IIk Input clamp current VOH IOL Tamb July 24, 1992 UNIT V V 0.8 V -18 mA 'F06, 'F07 12 V 'F06A, 'F07A 30 V 'F06, 'F07 64 mA 'F06A, 'F07A 48 mA +70 C High-level output voltage Low-level output current Operating free air temperature range 0 4 Philips Semiconductors Product specification 74F06, 74F06A, 74F07, 74F07A Hex inverter/buffer drivers (open-collector) DC ELECTRICAL CHARACTERISTICS (Over recommended operating free-air temperature range unless otherwise noted.) SYMBOL TEST CONDITIONS1 PARAMETER LIMITS MIN IOH High-level output current VOL Low-level output voltage 'F06, 'F07 VCC = MIN, VIL = MAX, VOH = MAX, MAX VIH = MIN 'F06A, 'F07A VCC = MIN, VIL = MAX, IOL = MAX VIH = MIN VIK TYP2 UNIT MAX 250 A 100 A 10% VCC 0.30 0.50 V 5% VCC 0.30 0.50 V -0.73 Input clamp voltage VCC = MIN, II = IIK -1.2 V II Input current at maximum input voltage VCC = MAX, VI = 7.0V 100 A IIH High-level input current VCC = MAX, VI = 2.7V 20 A IIL Low-level input current VCC = MAX, VI = 0.5V -0.6 mA -0.4 mA 'F06, 'F07 'F06A, 'F07A ICC Supply current (total) 74F06, 74F06A ICCH 5.0 8.0 mA ICCL VCC = MAX 30 43 mA 74F07, 74F07A ICCH 10 14 mA ICCL 32 45 mA NOTES: 1. For conditions shown as MIN or MAX, use the appropriate value specified under recommended operating conditions for the applicable type. 2. All typical values are at VCC = 5V, Tamb = 25C. 3. Not more than one output should be shorted at a time. For testing IOS, the use of high-speed test apparatus and/or sample-and-hold techniques are preferable in order to minimize internal heating and more accurately reflect operational values. Otherwise, prolonged shorting of a High output may raise the chip temperature well above normal and thereby cause invalid readings in other parameter tests. In any sequence of parameter tests, IOS tests should be performed last. AC ELECTRICAL CHARACTERISTICS LIMITS SYMBOL tPLH tPHL g y Propagation delay An to Yn tPLH tPHL Propagation g delay y An to Yn July 24, 1992 VCC = +5.0V Tamb = +25C CL = 50pF, RL = 100 TEST CONDITION PARAMETER VCC = +5.0V 10% Tamb = 0C to +70C CL = 50pF, RL = 100 UNIT Min Typ Max Min Max 2.0 1.5 3.5 3.0 6.0 5.5 1.5 1.0 6.5 6.0 ns 'F06A 5.0 2.0 9.0 4.0 11.0 6.0 4.0 2.0 15.0 8.0 ns 'F07 2.0 3.0 4.0 5.0 6.0 7.0 2.0 2.5 6.5 7.5 ns 6.0 5.0 10.5 7.5 13.0 10.0 5.0 4.0 17.0 13.0 ns 'F06 Waveform 1 Waveform 2 'F07A 5 Philips Semiconductors Product specification 74F06, 74F06A, 74F07, 74F07A Hex inverter/buffer drivers (open-collector) TYPICAL PROPAGATION DELAYS VERSUS LOAD FOR OPEN COLLECTOR OUTPUTS 18 16 tPLH 14 A versions Propagation delay (ns) 12 10 8 tPLH non-A versions 6 4 tPHL 2 both versions 0 0 100 200 300 400 500 600 Load resistor () SF00024 NOTE: When using Open-Collector parts, the value of the pull-up resistor greatly affects the value of the tPLH. For example, changing the specified pull-up resistor value from 500 to 100 will improve the tPLH up to 50% with only a slight increase in the tPHL. However, if the value of the pull-up resistor is changed, the user must make certain that the total IOL current through the resistor and the total IIL's of the receivers does not exceed the IOL maximum specification. July 24, 1992 6 Philips Semiconductors Product specification 74F06, 74F06A, 74F07, 74F07A Hex inverter/buffer drivers (open-collector) AC WAVEFORMS An An VM tPHL tPLH VM Yn VM VM VM tPLH VM tPHL VM Yn VM SF00025 SF00026 Waveform 1. Propagation delay for inverting outputs NOTE: For all waveforms, VM = 1.5V. Waveform 2. Propagation delay for non-inverting outputs TEST CIRCUIT AND WAVEFORMS 7.0V VCC tw 90% VIN RL VOUT PULSE GENERATOR NEGATIVE PULSE VM CL AMP (V) VM 10% D.U.T. RT 90% 10% tTHL (tf ) tTLH (tr ) tTLH (tr ) tTHL (tf ) 0V RL AMP (V) 90% 90% Test Circuit for Open Collector Outputs POSITIVE PULSE VM VM 10% DEFINITIONS: RL = Load resistor; see AC electrical characteristics for value. CL = Load capacitance includes jig and probe capacitance; see AC electrical characteristics for value. RT = Termination resistance should be equal to ZOUT of pulse generators. 10% tw 0V Input Pulse Definition INPUT PULSE REQUIREMENTS family amplitude VM 74F 3.0V 1.5V rep. rate tw tTLH tTHL 1MHz 500ns 2.5ns 2.5ns SF00027 July 24, 1992 7 Philips Semiconductors Product specification 74F06, 74F06A, 74F07, 74F07A Inverter/buffer drivers DIP14: plastic dual in-line package; 14 leads (300 mil) 1992 Jul 24 8 SOT27-1 Philips Semiconductors Product specification 74F06, 74F06A, 74F07, 74F07A Inverter/buffer drivers SO14: plastic small outline package; 14 leads; body width 3.9 mm 1992 Jul 24 9 SOT108-1 Philips Semiconductors Product specification 74F06, 74F06A, 74F07, 74F07A Inverter/buffer drivers Data sheet status Data sheet status Product status Definition [1] Objective specification Development This data sheet contains the design target or goal specifications for product development. Specification may change in any manner without notice. Preliminary specification Qualification This data sheet contains preliminary data, and supplementary data will be published at a later date. Philips Semiconductors reserves the right to make chages at any time without notice in order to improve design and supply the best possible product. Product specification Production This data sheet contains final specifications. Philips Semiconductors reserves the right to make changes at any time without notice in order to improve design and supply the best possible product. [1] Please consult the most recently issued datasheet before initiating or completing a design. Definitions Short-form specification -- The data in a short-form specification is extracted from a full data sheet with the same type number and title. For detailed information see the relevant data sheet or data handbook. Limiting values definition -- Limiting values given are in accordance with the Absolute Maximum Rating System (IEC 134). Stress above one or more of the limiting values may cause permanent damage to the device. These are stress ratings only and operation of the device at these or at any other conditions above those given in the Characteristics sections of the specification is not implied. Exposure to limiting values for extended periods may affect device reliability. Application information -- Applications that are described herein for any of these products are for illustrative purposes only. Philips Semiconductors make no representation or warranty that such applications will be suitable for the specified use without further testing or modification. Disclaimers Life support -- These products are not designed for use in life support appliances, devices or systems where malfunction of these products can reasonably be expected to result in personal injury. Philips Semiconductors customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Philips Semiconductors for any damages resulting from such application. Right to make changes -- Philips Semiconductors reserves the right to make changes, without notice, in the products, including circuits, standard cells, and/or software, described or contained herein in order to improve design and/or performance. Philips Semiconductors assumes no responsibility or liability for the use of any of these products, conveys no license or title under any patent, copyright, or mask work right to these products, and makes no representations or warranties that these products are free from patent, copyright, or mask work right infringement, unless otherwise specified. Copyright Philips Electronics North America Corporation 1998 All rights reserved. Printed in U.S.A. Philips Semiconductors 811 East Arques Avenue P.O. Box 3409 Sunnyvale, California 94088-3409 Telephone 800-234-7381 print code Document order number: yyyy mmm dd 10 Date of release: 10-98 9397-750-05054