www.vishay.com For technical questions, contact: ff2aresistors@vishay.com Document Number: 66001
56 Revision: 05-Sep-11
HDN (Military RNR/RNN)
Vishay Angstrohm
Metal Film Resistors, Military/Established Reliability,
Hermetically-Sealed, MIL-PRF-55182 Qualified, Precision,
Type RNR, Characteristics E and C
This document is subject to change without notice.
THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
For the highest degree of reliability, stability and uniformity
of construction, Vishay Angstrohm hermetically-sealed metal
film resistors are unquestionably the first choice. The true
glass-to-metal hermetic enclosure seals the resistor element
in an inert gas atmosphere and protects it from virtually
all adverse environmental influences. The glass enclosure
will withstand in excess of 3000 psi external pressure without
leakage. The reliability and stability of Vishay Angstrohm
hermetically-sealed resistors have been established by
their use in nearly every military, missile, aerospace and
oceangraphy program having the most demanding
applications and the most hostile environments.
FEATURES
Qualified to MIL-PRF-55182 characteristics E and C
(E only for RNR75)
Performance exceeds the requirements of
MIL-PRF-55182
“S” level reliability
Hermetic glass enclosure is impervious to harmful
environments
Inert gas filled
Low noise (- 40 dB)
• Standard lead on the RNR product is solderable and on the
RNN is weldable
• MODEL RNC: For characteristics E and C (per
MIL-PRF-55182) terminal model RNR shall be used as a
substitute.
For MIL-PRF-55182 characteristics J, H and K product,
see Vishay Dale’s ERC (Military RNC/RNR) datasheet
Notes
(1) Temperature characteristics E and C designate hermetically-sealed enclosure.
(2) Standard resistance values should be selected from the Resistance-Tolerance Decade table. B tolerance available in all values.
(3) Contact factory for current QPL failure rates.
(4) Continuous working voltage shall be or maximum working voltage, whichever is less.
(5) Hot solder dipped leads.
STANDARD ELECTRICAL SPECIFICATIONS
VISHAY
ANGSTROHM
MODEL
MIL-PRF-55182
STYLE
MIL
SPEC.
SHEET
POWER
RATING TOLERANCE
± %
MAXIMUM
WORKING
VOLTAGE (4)
V
RESISTANCE RANGE (2)
LIFE
FAILURE
RATE (3)
P70 °C
W
P125 °C
W
± 50 ppm/°C (1)
(C)
± 25 ppm/°C (1)
(E)
HDN55,
HDN55..65 (5)
RNR55,
RNN55 01 0.125 0.10 0.1, 0.5, 1 200 10 to 1.21M 10 to 1.21M M, P, R, S
HDN57,
HDN57..1 (5)
RNR57,
RNN57 02 0.25 0.125 1 250 49.9 to 200K 49.9 to 200K M, P, R, S
HDN60,
HDN60..1 (5)
RNR60,
RNN60 03 0.25 0.125 0.1, 0.5, 1 250 10 to 2.49M 10 to 2.49M M, P, R, S
HDN65,
HDN65..65 (5)
RNR65,
RNN65 05 0.50 0.25 0.1, 0.5, 1 300 24.9 to 4.99M 24.9 to 4.99M M, P
HDN70,
HDN70..4(5)
RNR70,
RNN70 06 0.75 0.50 0.1, 0.5, 1 350 24.9 to 4.99M 24.9 to 4.99M M, P
HDN75,
HDN75..1 (5)
RNR75,
RNN75 10 2.0 1.0 0.1, 0.5, 1 750 - 49.9 to 1.21M M
P x R
Document Number: 66001 For technical questions, contact: ff2aresistors@vishay.com www.vishay.com
Revision: 05-Sep-11 57
HDN (Military RNR/RNN)
Metal Film Resistors, Military/Established Reliability,
Hermetically-Sealed, MIL-PRF-55182 Qualified, Precision,
Type RNR, Characteristics E and C
Vishay Angstrohm
This document is subject to change without notice.
THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Notes
(1) MODEL RNC: For characteristics C and E (per MIL-PRF-55182) terminal model RNR shall be used as a substitute
(2) For RNR75 only: Characteristic J (± 25 ppm/°C) is also available
GLOBAL PART NUMBER INFORMATION
New Global Part Numbering: RNR55E49R9BSM76 (preferred part number format)
MIL STYLE
(1)
CHARACTERISTIC
(2)
RESISTANCE
VALUE
TOLERANCE
CODE FAILURE RATE PACKAGING SPECIAL
RNR = Solderable only
RNN = Weldable only
(see Standard Electrical
Specifications table)
E
= 25 ppm
C
= 50 ppm
3 digit significant
figure, followed by
a multiplier
Use “R” for values
< 100
10R0
= 10
49R9
= 49.9
2152
= 21.5 k
3014
= 3.01 M
B
= ± 0.1 %
D
= ± 0.5 %
F
= ± 1 %
M
= 1.0 %/1000 h
P
= 0.1 %/1000 h
R
= 0.01 %/1000 h
S
= 0.001 %/1000 h
M76
= Foil bag
(55, 57, 60 ,65, 70)
M77
= Foil bag
(75 only)
BSL
= Foil bag,
single lot date code
RJ7
= T/R (55, 57, 60)
RJ8
= T/R (65, 70, 75)
RSL
= T/R, single lot
date code
Blank = Standard
(Dash Number)
(up to 3 digits)
From
1 to 999
as applicable
1
= Hot solder dip
(57’s, 60’s, 75’s)
4
= Hot solder dip
(70’s)
65
= Hot solder
dip (55’s, 65’s)
Historical Part Numbering: RNR55E49R9BS (will continue to be accepted)
RNR55 E 49R9 B S
MIL STYLE CHARACTERISTIC RESISTANCE
VALUE
TOLERANCE
CODE
FAILURE
RATE
POWER DERATING
CAGE CODE: 17745
120
100
80
60
40
20
0
AMBIENT TEMPERATURE IN °C
25 50 75 100 125 150 175
125 °C
% OF RATED POWER
55E4 R9B9NR SM7R 6
www.vishay.com For technical questions, contact: ff2aresistors@vishay.com Document Number: 66001
58 Revision: 05-Sep-11
HDN (Military RNR/RNN)
Vishay Angstrohm Metal Film Resistors, Military/Established Reliability,
Hermetically-Sealed, MIL-PRF-55182 Qualified, Precision,
Type RNR, Characteristics E and C
This document is subject to change without notice.
THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Notes
(1) This typical data is taken from the average resistance shifts from numerous values. The actual shifts are dependent on the value.
(2) Any shift during moisture testing is due to the “load” (mini-load life) portion of the test and not due to the effect of moisture
MARKING
55, 57 EXAMPLE
RNR55C1002FS
- Date Code, RTC Code
- Resistance Code
- Tolerance, Failure Rate, Terminal, JAN
- Manufacturer Identification
005C
1002
FSRJ
A
60, 65, 70, 75 EXAMPLE
RNR60E2501FS
- Source Code
- Date Code, JAN
- Style, Size, RTC Code
- Resistance Code, Tolerance, Failure Rate
17745
0005J
RNR60E
2501FS
COMPARISON OF VISHAY ANGSTROHM CHARACTERISTICS TO MIL SPECIFICATION LIMIT
(1)
MILITARY
STYLE
(RNR/RNN)
LOAD
LIFE
LIMIT ± 2.0 %
MOISTURE (2)
LIMIT ± 0.2 %
SHOCK
LIMIT ± 0.2 %
VIBRATION
LIMIT ± 0.2 %
HIGH
TEMPERATURE
EXPOSURE
LIMIT ± 2.0 %
LOW
TEMPERATURE
OPERATION
LIMIT ± 0.15 %
RESISTANCE
TO SOLDERING
HEAT
LIMIT ± 0.1 %
55 < 0.2 % < 0.03 % < 0.02 % < 0.02 % < 0.4 % < 0.004 % < 0.02 %
57 < 0.3 % < 0.02 % < 0.01 % < 0.01 % < 0.3 % < 0.005 % < 0.01 %
60 < 0.3 % < 0.03 % < 0.01 % < 0.01 % < 0.4 % < 0.004 % < 0.02 %
65 < 0.5 % < 0.03 % < 0.01 % < 0.01 % < 0.4 % < 0.003 % < 0.01 %
70 < 0.6 % < 0.01 % < 0.01 % < 0.01 % < 0.4 % < 0.006 % < 0.01 %
75 < 0.5 % < 0.02 % < 0.01 % < 0.01 % < 0.3 % < 0.010 % < 0.01 %
Document Number: 66001 For technical questions, contact: ff2aresistors@vishay.com www.vishay.com
Revision: 05-Sep-11 59
HDN (Military RNR/RNN)
Metal Film Resistors, Military/Established Reliability,
Hermetically-Sealed, MIL-PRF-55182 Qualified, Precision,
Type RNR, Characteristics E and C
Vishay Angstrohm
This document is subject to change without notice.
THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
DIMENSIONS PER MIL-PRF-55182 in inches (millimeters)
VISHAY
ANGSTROHM
MODEL
MIL-
PRF-
55182
STYLE
A
LENGTH
B
DIAMETER
C
CL TO CL
(MAX.)
D
LENGTH
± 0.125 (± 3.18)
E
DIAMETER
± 0.002 (± 0.051)
APPROX.
WEIGHT
(g)
HDN55 RNR55,
RNN55
0.250 + 0.031 - 0.046
(6.35 + 0.78 - 1.17)
0.109 ± 0.031
(2.77 ± 0.78)
0.379
(9.63)
1.50
(38.10)
0.025
(0.635) 0.337
HDN57 RNR57,
RNN57
0.281 ± 0.062
(7.14 ± 1.57)
0.155 ± 0.015
(3.94 ± 0.38)
0.467
(11.86)
1.25
(31.75)
0.025
(0.635) 0.405
HDN60 RNR60,
RNN60
0.375 + 0.062 - 0.115
(9.53 + 1.57 - 2.92)
0.125 ± 0.040
(3.18 ± 1.02)
0.561
(14.25)
1.50
(38.10)
0.025
(0.635) 0.450
HDN65 RNR65,
RNN65
0.625 + 0.031 - 0.094
(15.8 + 0.787 - 2.39)
0.188 + 0.062 - 0.031
(4.78 + 1.57 - 0.787)
0.780
(19.81)
1.50
(38.10)
0.025
(0.635) 1.30
HDN70 RNR70,
RNN70
0.750 + 0.125 - 0.250
(19.05 + 3.18 - 6.35)
0.250 + 0.078 - 0.090
(6.35 + 1.98 - 2.29)
0.939
(23.85)
1.50
(38.10)
0.032
(0.813) 1.44
HDN75 RNR75,
RNN75
1.062 ± 0.062
(26.98 ± 1.58)
0.375 + 0.062 - 0.150
(9.53 + 1.57 - 3.81)
1.186
(30.12)
1.50
(38.10)
0.032
(0.813) 2.500
B
EC
AD
Document Number: 91000 www.vishay.com
Revision: 11-Mar-11 1
Disclaimer
Legal Disclaimer Notice
Vishay
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree
to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and
damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay
or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to
obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
