TCMT1100 Series, TCMT4100 Series
www.vishay.com Vishay Semiconductors
Rev. 2.7, 31-Jan-12 1Document Number: 83510
For technical questions, contact: optocoupleranswers@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Optocoupler, Phototransistor Output, Single/Quad Channel,
Half Pitch Mini-Flat Package
DESCRIPTION
The TCMT1100 series consist of a phototransistor optically
coupled to a gallium arsenide infrared-emitting diode in a
4 pin (single channel) up to 16 pin (quad channel) package.
The elements are mounted on one leadframe providing a
fixed distance between input and output for highest safety
requirements.
FEATURES
• Low profile package (half pitch)
• AC isolation test voltage 3750 VRMS
• Low coupling capacitance of typical 0.3 pF
• Current transfer ratio (CTR) selected into groups
• Low temperature coefficient of CTR
• Wide ambient temperature range
• Compliant to RoHS Directive 2002/95/EC and in
accordance to WEEE 2002/96/EC
APPLICATIONS
• Programmable logic controllers
•Modems
• Answering machines
• General applications
AGENCY APPROVALS
• UL1577, file no. E76222 system code M, double
protection
• cUL CSA 22.2 bulletin 5A, double protection
• DIN EN 60747-5-2 (VDE 0884)
DIN EN 60747-5-5 (pending)
• FIMKO: FI EN 60950-1:2006
• BSI: BS EN60065:2002
BS EN60950-1:2006
Notes
• Available only on tape and reel.
(1) Product is rotated 180° in tape and reel cavity.
16467-6
CE
AC
4PIN
16 PIN
12 8
9
ORDERING INFORMATION
TCMT#10#
PART NUMBER
AGENCY
CERTIFIED/PACKAGE
CTR (%)
SINGLE
CHANNEL DUAL CHANNEL
5
m
A 10
m
A5
m
A
UL, cUL, FIMKO,
BSI, VDE 50 to 600 40 to 80 63 to 125 100 to 200 160 to 320 50 to 150 100 to 300 80 to 160 130 to 260 200 to 400
SOP-4, single channel TCMT1100 TCMT1101 TCMT1102 TCMT1103 TCMT1104 TCMT1105 TCMT1106 TCMT1107 TCMT1108 TCMT1109
SOP-16 TCMT4100 - - - - - TCMT4106 - - -
SOP-16, quad channel TCMT4100T0
(1)
---------
7 mm
SOP-#
TCMT1100 Series, TCMT4100 Series
www.vishay.com Vishay Semiconductors
Rev. 2.7, 31-Jan-12 2Document Number: 83510
For technical questions, contact: optocoupleranswers@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Notes
• Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. Functional operation of the device is not
implied at these or any other conditions in excess of those given in the operational sections of this document. Exposure to absolute
maximum ratings for extended periods of the time can adversely affect reliability.
(1) Wave soldering three cycles are allowed. Also refer to “Assembly Instructions” (www.vishay.com/doc?80054).
Note
• Minimum and maximum values are testing requirements. Typical values are characteristics of the device and are the result of engineering
evaluation. Typical values are for information only and are not part of the testing requirements.
ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C, unless otherwise specified)
PARAMETER TEST CONDITION SYMBOL VALUE UNIT
INPUT
Reverse voltage VR6V
Forward current IF60 mA
Forward surge current tp ≤ 10 μs IFSM 1.5 A
Power dissipation Pdiss 100 mW
Junction temperature Tj125 °C
OUTPUT
Collector emitter voltage VCEO 70 V
Emitter collector voltage VECO 7V
Collector current IC50 mA
Collector peak current tp/T = 0.5, tp ≤ 10 ms ICM 100 mA
Power dissipation Pdiss 150 mW
Junction temperature Tj125 °C
COUPLER
AC isolation test voltage (RMS) Related to standard climate 23/50
DIN 50014 VISO 3750 VRMS
Total power dissipation Ptot 250 mW
Operating ambient temperature range Tamb - 40 to + 100 °C
Storage temperature range Tstg - 40 to + 125 °C
Soldering temperature (1) Tsld 260 °C
ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified)
PARAMETER TEST CONDITION SYMBOL MIN. TYP. MAX. UNIT
INPUT
Forward voltage IF = 50 mA VF1.25 1.6 V
Junction capacitance VR = 0, f = 1 MHz Cj50 pF
OUTPUT
Collector emitter voltage IC = 100 μA VCEO 70 V
Emitter collector voltage IE = 100 μA VECO 7V
Collector dark current VCE = 20 V, IF = 0 A ICEO 100 nA
COUPLER
Collector emitter saturation voltage IF = 10 mA, IC = 1 mA VCEsat 0.3 V
Cut-off frequency VCE = 5 V, IF = 10 mA,
RL = 100 Ωfc100 kHz
Coupling capacitance f = 1 MHz Ck0.3 pF
TCMT1100 Series, TCMT4100 Series
www.vishay.com Vishay Semiconductors
Rev. 2.7, 31-Jan-12 3Document Number: 83510
For technical questions, contact: optocoupleranswers@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Fig. 1 - Test Circuit, Non-Saturated Operation Fig. 2 - Test Circuit, Saturated Operation
CURRENT TRANSFER RATIO (Tamb = 25 °C, unless otherwise specified)
PARAMETER TEST CONDITION PART SYMBOL MIN. TYP. MAX. UNIT
IC/IF
VCE = 5 V, IF = 5 mA TCMT1100 CTR 50 600 %
VCE = 5 V, IF = 10 mA
TCMT1101 CTR 40 80 %
TCMT1102 CTR 63 125 %
TCMT1103 CTR 100 200 %
TCMT1104 CTR 160 320 %
VCE = 5 V, IF = 5 mA
TCMT1105 CTR 50 150 %
TCMT1106 CTR 100 300 %
TCMT1107 CTR 80 160 %
TCMT1108 CTR 130 260 %
TCMT1109 CTR 200 400 %
TCMT4100 CTR 50 600 %
TCMT4106 CTR 100 300 %
SWITCHING CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified)
PARAMETER TEST CONDITION SYMBOL MIN. TYP. MAX. UNIT
Delay time VS = 5 V, IC = 2 mA, RL = 100 Ω,
(see figure 1) td3μs
Rise time VS = 5 V, IC = 2 mA, RL = 100 Ω,
(see figure 1) tr3μs
Fall time VS = 5 V, IC = 2 mA, RL = 100 Ω,
(see figure 1) tf4.7 μs
Storage time VS = 5 V, IC = 2 mA, RL = 100 Ω,
(see figure 1) ts0.3 μs
Turn-on time VS = 5 V, IC = 2 mA, RL = 100 Ω,
(see figure 1) ton 6μs
Turn-off time VS = 5 V, IC = 2 mA, RL = 100 Ω,
(see figure 1) toff 5μs
Turn-on time VS = 5 V, IF = 10 mA, RL = 1 kΩ,
(see figure 2) ton 9μs
Turn-off time VS = 5 V, IF = 10 mA, RL = 1 kΩ,
(see figure 2) toff 18 μs
Channel I
Channel II
95 10804
R
G
= 50 Ω
t
p
t
p
= 50 µs
T= 0.01
+ 5 V
I
F
0
50 Ω100 Ω
I
F
I
C
= 2 mA; adjusted through
input amplitude
Oscilloscope
R
L
= 1 MΩ
C
L
= 20 pF
Channel I
Channel II
95 10843
RG= 50 Ω
tp
tp= 50 µs
T= 0.01
+ 5 V
IC
IF
0
50 Ω1 kΩ
IF= 10 mA
Oscilloscope
RL
≥
CL20 pF
1 MΩ
≤
TCMT1100 Series, TCMT4100 Series
www.vishay.com Vishay Semiconductors
Rev. 2.7, 31-Jan-12 4Document Number: 83510
For technical questions, contact: optocoupleranswers@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Fig. 3 - Switching Times
Note
• As per IEC 60747-5-2, § 7.4.3.8.1, this optocoupler is suitable for “safe electrical insulation” only within the safety ratings. Compliance with
the safety ratings shall be ensured by means of protective circuits.
TYPICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified)
Fig. 4 - Total Power Dissipation vs. Ambient Temperature Fig. 5 - Forward Current vs. Forward Voltage
tpt
t
0
0
10 %
90 %
100 %
tr
td
ton
tstf
toff
IF
IC
tpPulse duration
tdDelay time
trRise time
ton (= td + tr) Turn-on time
tsStorage time
tfFall time
toff (= ts + tf) Turn-off time
96 11698
SAFETY AND INSULATION RATINGS
PARAMETER TEST CONDITION SYMBOL MIN. TYP. MAX. UNIT
Climatic classification IEC 68 part 1 40/110/21
Comparative tracking index CTI 175 399
VIOTM 6000 V
VIORM 707 V
PSO 265 mW
ISI 130 mA
TSI 150 °C
Creepage distance 5mm
Clearance distance 5mm
Insulation thickness, reinforced rated per IEC60950 2.10.5.1 0.4 mm
0
50
100
150
200
250
300
0 40 80 120
P
tot
- Total Power Dissipation (mW)
T
amb
- Ambient Temperature (°C)
96 11700
Coupled device
Phototransistor
IR-diode
0.1
1
10
100
1000
0
V
F
- Forward Voltage (V)
96 11862
I
F
- Forward Current (mA)
1.6
1.2
0.8
0.4 2.0
TCMT1100 Series, TCMT4100 Series
www.vishay.com Vishay Semiconductors
Rev. 2.7, 31-Jan-12 5Document Number: 83510
For technical questions, contact: optocoupleranswers@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Fig. 6 - Relative Current Transfer Ratio vs.
Ambient Temperature
Fig. 7 - Collector Dark Current vs. Ambient Temperature
Fig. 8 - Collector Current vs. Forward Current
Fig. 9 - Collector Current vs. Collector Emitter Voltage
Fig. 10 - Collector Emitter Saturation Voltage vs.
Collector Current
Fig. 11 - Current Transfer Ratio vs. Forward Current
0255075
1
10
100
1000
10 000
ICEO - Collector Dark Current,
100
95 11026
with Open Base (nA)
VCE = 20 V
IF = 0
Tamb - Ambient Temperature (°C)
0.1 1 10
0.01
0.1
1
100
IC - Collector Current (mA)
IF - Forward Current (mA)
100
95 11027
10
VCE = 5 V
0.1 1 10
0.1
1
10
100
VCE - Collector Emitter Voltage (V)
100
95 10985
IC - Collector Current (mA)
I
F
= 50 mA
5 mA
2 mA
1 mA
20 mA
10 mA
110
0
0.2
0.4
0.6
0.8
1.0
VCEsat - Collector Emitter
Saturation Voltage (V)
IC - Collector Current (mA)
100
CTR = 50 %
used
20 % used
95 11028
10 % used
0.1 1 10
1
10
100
1000
CTR - Current Transfer Ratio (%)
IF - Forward Current (mA)
100
95 11029
VCE = 5 V
TCMT1100 Series, TCMT4100 Series
www.vishay.com Vishay Semiconductors
Rev. 2.7, 31-Jan-12 6Document Number: 83510
For technical questions, contact: optocoupleranswers@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Fig. 12 - Turm-on/off Time vs. Forward Current Fig. 13 - Turn-on/off Time vs. Collector Current
PACKAGE DIMENSIONS in millimeters
01015
0
10
20
30
40
50
I
F
- Forward Current (mA)
20
95 11031
t
on
/t
off
- Turn-on/Turn-off Time (µs)
Saturated operation
VS = 5 V
RL = 1 kΩ
toff
ton
5
04
0
2
4
6
8
10
IC - Collector Current (mA)
8
95 11030
ton/toff- Turn-on /Turn-off Time (µs)
Non-saturated
operation
VS = 5 V
RL = 100 Ω
toff
ton
6
2
16283
Possible footprint
technical drawings
according to DIN
specifications
0.15 + 0.10
- 0.05
0.7 + 0.3
- 0.4
7+ 0.3
- 0.4
0.1 ± 0.1
12
43
Pin no. 1 identification
2.1 max.
1.9
2.8 max.
1.27 nom.
0.45 ± 0.1
0.9
1.27
4.4 ± 0.2
2.5
5
7.6
TCMT1100 Series, TCMT4100 Series
www.vishay.com Vishay Semiconductors
Rev. 2.7, 31-Jan-12 7Document Number: 83510
For technical questions, contact: optocoupleranswers@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
PACKAGE MARKING (example)
7.6
5
4.4 ± 0.2
1.9
1.27 nom.
0.45 ± 0.1
7+ 0.3
- 0.4
0.7 + 0.3
- 0.4
0.1 ± 0.1
0.15
+ 0.10
- 0.05
1.27
0.9
specifications
according to DIN
technical drawings
10.12
10.4 max.
7 x 1.27 = 8.89
8.89
2.1 max.
Pin no. 1 identification
Issue: 1; 04.04.00
Drawing-No.: 6.544-5330.03-4
Possible footprint
16 15 14 13 12 11 10 9
12345678
15226
21764-10
MT1100
V YWW M 68
21764-11
TCMT4100
V YWW M 68
Legal Disclaimer Notice
www.vishay.com Vishay
Revision: 12-Mar-12 1Document Number: 91000
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree
to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and
damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay
or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to
obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.